Machining Center - Universal

x-travel 800 mm︱y-travel 500 mm︱z-travel 500 mm︱control HEIDENHAIN TNC 430 ︱spindle diameter 70 mm︱spindle turning speed range 20 -12.000 U/min︱spindle taper ISO 40 0︱tool change unit 30-fach 0︱workpiece weight 250 kg︱total power requirement 30 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 3.260 x 2.210 x 2.930 m︱

---

nice machine with chip convoyer and HEIDENHAINTNC 43

x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Heidenhain 430 ︱tool taper SK 40 ︱spindle speed: 20- 9.000 ︱spindle drive 13/9 kW︱feed speeds 10.000 mm/min︱rapid traverse 12 m/min︱tool change unit 16 SK 40︱table-size 700 x 500 mm︱swival range +/- +95/ - 10 °︱Dimensions (HxWxD) 2,86 x 1,6 x 2,45 mm︱weight of the machine ca. 3,0 t︱

---

CNC- machining centre with manuell tilt and turn table - position tilt and turn table on the display, movable with hand wheel - automatic lubication - Tool changer - elec. handwheel - full covered

x-travel 630 mm︱y-travel 630 mm︱z-travel 500 mm︱Control Siemens 840 D ︱tool taper HSK 63 A ︱weight of the machine ca. 15,0 t︱

---

In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Five-axis - Single spindle design/horizontal There are 9 identical machines available. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 400 mm︱y-travel 450 mm︱z-travel 400 mm︱control Siemens 840C ︱main spindle: ︱number of spindles 2 Stück︱turning speed range - main spindle 50 - 12.500 min/-1︱torque 2 x 80 Nm︱drive capacity - main spindle 2 x 23,5 kW︱tool changer: ︱number of tool places 2 x 30 Pos.︱tool taper HSK 63 A ︱max. tool diameter 75 mm︱max. tool length 275 mm︱max. tool weight 10 kg︱change-time chip to chip ca. 4,5 sec︱feeds: ︱feed speeds 1 - 40.000 mm/min︱total power requirement 68 kW︱weight of the machine ca. 13,8 t︱

---

In our opinion, the machine is in very good condition used Condition and can be viewed under power by appointment. There are 5 identical machines available ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 800 mm︱y-travel 650 mm︱z-travel 550 mm︱CNC-control TNC 426 HEIDENHAIN︱Table dimensions 1100 x 650 mm︱max. table load 600 kg︱spindle taper SK 40 ︱spindle turning speed range 20 - 12.000 U/min︱feed range 20 - 10.000 mm/min︱rapid traverse Z-axis 15 m/min︱rapid traverse X- and Y-axis 18 m/min︱tool change unit 25 Pos.︱power capacity 15 kW︱coolant ︱voltage 400 V︱total power requirement 26 kVA︱weight of the machine ca. 6,0 t︱dimensions of the machine ca. 2,40 x 3,30 x 2,40 m︱chip conveyor 2,90 x 0,70 x 1,50 m︱

---

CNC HEIDENHAIN TNC 426 - coolant equipment - chip conveyor - 12000 RPM SK 40

x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱control TNC 426 HEIDENHAIN ︱turning speeds 15000 1/min︱taper ISO ISO 40 ︱tool change unit 98 ︱spindle 15 kW︱

---

5-axis machine with round-swivelling table, NC-swivelling table dia. 290mm,A-axis from -110° - +110°, B-axis 360°, 3-D probe RENISHAW, Laser tool measuring system Ethernet interface, EXTRA MAGASIN 96 TOOLS compensation of temperature Y / Z axis, flush gun, lots of accessories, approx. 13.500 hours "spindle running", 21.000 hours "machine on"

x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱control TNC 426 HEIDENHAIN ︱turning speeds 12000 1/min︱tool adaptor SK 40 ︱tool change unit 25 Pos.︱table: 1000 x 610 mm︱universal head manuell ︱rapid traverse 30 m/min︱total power requirement kW︱

---

ead manually swivellable, TNC 426 12000 RPM SK 40 el. handwheel, mode 4, table touch probe, 25 POSITONS TOLLS MAGASIN

x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱CNC-control TNC 430 HEIDENHAIN︱Table dimensions 540 x 540 x Ø 630 mm︱max. table load 300 kg︱spindle taper SK 40 ︱spindle turning speed range 15.000 U/min︱drive capacity - spindle motor 10,5 kW︱feed range 30.000 mm/min︱rapid traverse 30 m/min︱tool change unit 30 Pos.︱coolant ︱voltage 400 V︱total power requirement 31,0 kVA︱weight of the machine ca. 8,0 t︱dimensions of the machine ca. 2,85 x 3,45 x 2,70 m︱

---

- Serial-No.: 11875 - Machine ON: 69.318 h - Programm Run: 36.873 h - CNC control: TNC 430 HEIDENHAIN - electrical hand wheel - coolant equipment - spindle head with new bearings

x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱turning speeds 20-6300 U/min︱control Pfilips ︱type CNC 532 ︱Tool changer ︱spindle taper ISO 40 ︱chip conveyor ︱quill stroke 80 mm︱Feed 1-6000 mm/min︱rapid traverse 6 m/min︱total power requirement 15 KVA︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 3,3x2,1x2,2 m︱

---

Control Millplus ︱Table size ø 900 x 614 mm︱Table load kg︱Number of pallets 1 x︱Maximum workpiece diameterxheight mm︱Movement X-axis 800 mm︱Movement Y-axis 650 mm︱Movement Z-axis 550 mm︱C-Axis (table rotation) 360 °︱A-Axis (table tilt) 0 - 30 °︱B-Axis travel °︱C-Axis (table rotation) ︱Spindle Speed 20 - 6300 1/min︱Spindle taper DIN 69871A/40 ︱Spindle motor 17/11.5 kW︱Magazin capacity 25 ︱Required floor space mm︱Length 2260 mm︱Width 3050 mm︱Height 2273 mm︱

---

x-travel 1200 mm︱y-travel 600 mm︱z-travel 600 mm︱total power requirement 25 kW︱weight of the machine ca. 11,5 t︱

---

M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____________________________________________________________ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

x-travel 730 mm︱y-travel 850 mm︱z-travel 560 mm︱Control Mazatrol 640 M 5X ︱total power requirement kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. 5985 x 3645 x 3557 mm︱

---

The machine can be inspected in Bavaria, near the city of Bayreuth under power. CNC control Mazatrol 640 M 5X Table size: Ø 630 mm x 500 mm Travels: X: 730 mm Y: 850 mm Z: 560 mm A: +-30° to -120 C: 360° Distance table top to spindle nose: 230 to 790 mm Max. workpiece dimensions: Ø 1000 mm x 340 mm Load capacity of the table: 500 kg Spindle motor AC 44,4/30/22 kW Max. spindle speed: 10000 rpm tool holder SK 50 Tool magazine with 80 tool places Max. tool diameter: 125 mm / 210 mm Max. Tool length: 400 mm Cooling through the spindle High pressure pump 70 bar Mayfran Consep 2000 chip conveyor with drum filter

x-travel 700 mm︱y-travel 600 mm︱z-travel 600 mm︱table surface area 630 mm︱ 360 Grad︱angle of table min./max. 45/20 Grad︱turning speeds 6300 U/min︱control Pfilips ︱type CNC 432 ︱Tool changer ︱spindle taper ISO 40 ︱chip conveyor ︱total power requirement 27 KVA︱weight of the machine ca. 5,8 t︱dimensions of the machine ca. 4,1x2,3x2,4 m︱

---

x-travel 1600 mm︱y-travel 900 mm︱z-travel 800 mm︱Control Heidenhein iTNC ︱table-size 1700x850 mm︱taper ISO ISO 40 ︱turning speeds 10000 U/min︱workpiece Random 30 pos. ︱table weight 2000 Kg︱rapid traverse: 20 m/min︱Internal cooling system 20 bar︱total power requirement 18 kW︱weight of the machine ca. 18600 kg︱dimensions of the machine ca. m︱

---

-Maschinenstunden 47.256 h -Spindelstunden 9.362 h

x-travel 1.600 mm︱y-travel 1.250 mm︱z-travel 1.000 mm︱Control SIEMENS 8400 Powerline 3D ︱numbers of pallets 6 ︱size of pallet 1.250 ×1.000 mm︱T-slots DIN 55201-A2 ︱c-axis 0,001 °︱spindle 85/65 kW︱spindle (milling): 0,000 ︱rapid travel x/y/z 60.000 mm/min︱tool adaptor HSK-A 63 DIN 69893 ︱Speed 20-30.000 U/min︱turning tools travel - vertical 40/32 mm︱tool magazin: 120 ︱Internal cooling system 50 bar︱Chip coveyor Inkl. ︱handwheel SIEMENS 840D ︱total power requirement 139 kWA︱weight of the machine ca. 55 t︱

---

Control Heidenhain iTNC 530 ︱x-travel 450 mm︱y-travel 400 mm︱z-travel 480 mm︱b-axis -95/+30 °︱c-axis 360 °︱spindle turning speed - stepless 12000 U/min︱weight of the machine ca. 4.5 t︱dimensions of the machine ca. 2.4 x 3.0 x 2.5 m︱

---

Control HEIDENHAIN iTNC-530 ︱for axes 5 ︱x-travel 712 mm︱y-travel 508 mm︱z-travel 515 mm︱-A-axis table swivelling +30/-120 °︱-C-axis table rotating 360 °︱rotary table dia. 330 mm︱no. of tools in magazin 60 ︱max. tool diameter 88 mm︱max. tool-dia with free toolbox 125 mm︱max. tool length 280 mm︱max. tool weight 7 kg︱spindle taper SK40 Big Plus ︱spindle turning speed range -15000 U/min︱power capacity - milling spindle 25 kW︱weight of the machine ca. 12.8 t︱dimensions of the machine ca. 303x395x367 cm︱3D measuring tracer RENISHAW ︱Zero point clamping system: LANG TECHNIK ︱

---

x-travel 630 mm︱y-travel 765 mm︱z-travel 600 mm︱-A-axis table swivelling -120/+30 (0.001) °︱-C-axis table rotating 360 (0.001) °︱weight of the machine ca. 14.5 t︱dimensions of the machine ca. 4.5 x 2.4 x 3.52 m︱

---

Control HEIDENHAIN iTNC-530 ︱x-travel 885 mm︱y-travel 800 mm︱z-travel 520 mm︱B-axis (table) +30/-120 °︱c-axis 360 °︱table-size 600x500 mm︱tool magazin: 60 ︱spindle taper ISO 40 Big Plus︱spindle turning speed - stepless 15000 U/min︱total power requirement 25 kW︱rapid travel x/y/z 36 mm/min︱rapid traverse (slewing motion) 60 U/min︱rapid traverse feeds rotary table 100 U/min︱dimensions of the machine ca. 3.8x3.6x3.0 m︱weight of the machine ca. 12,1 t︱Coolant through spindle: pressure 20 bar︱3D measuring tracer RENISHAW ︱Chip conveyor ︱Coolant installation ︱

---

with CNC-path-control HEIDENHAIN ︱type iTNC 530 ︱for axes 5 ︱x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱b-axis -30/+180 °︱c-axis 360 °︱table-size 800x630 mm︱workpiece weight max. -1200 kg︱tool magazin: 120 ︱max. tool diameter 100 mm︱max. tool-dia with free toolbox 160 mm︱max. tool length 450 mm︱max. tool weight 15 kg︱spindle taper SK40 ︱spindle turning speed - stepless -1200 U/min︱power capacity 32/44 kW︱rapid traverse 60 m/min︱feed stepless 10-20000 mm/min︱

---

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱table surface area 500 x 380 mm︱table load 200 kg︱tool taper SK 40 ︱spindle turning speed range 20 - 18000 U/min︱feed range 20000 mm/min︱rapid travel x/y/z 80/50/50 m/min︱no. of tools in the magazine 60 Stück︱tool diameter 80 (130) mm︱tool length - max. 300 mm︱weight of tools max. 6 kg︱power capacity 25 kW︱Dimensions (LxWxH) 3,14 x 2,26 x 2,52 m︱weight of the machine ca. 6,5 t︱

---

Used 5-axis machining centre * CNC control HEIDENHAIN iTNC 530 * 2-axis NC-swivel-type rotary table, B-axis 0-161,955 deg., C-axis 360 deg. * 60-position tool changer * 3D infrared measuring probe * Coolant unit with paper band filter system * Coolant through spindle * Chip conveyor

Control HEIDENHAIN iTNC530 ︱x-travel 1500 mm︱y-travel 800 mm︱z-travel 1000 mm︱spindle head swivable left - right 0-180 °︱c-axis 360 (0.001) °︱b-axis +/-90 (0.001) °︱table-size 1430X800 mm︱table diameter 802 mm︱workpiece weight max. 1500 kg︱tool magazin: 60 ︱spindle turning speed range -16000 U/min︱spindle taper HSK63 ︱feeds x/y/z -stepless 0-30000 mm/min︱feeds rotary table 20 U/min︱dimensions of the machine ca. 4x3.5x3 m︱weight of the machine ca. 18 t︱

---

x-travel 1626 mm︱y-travel 813 mm︱z-travel 762 mm︱Control HAAS ︱tool taper ISO SK-40 ︱tool change unit 40 fach︱spindle turning speed range 7500 U/min︱table dimension - longitudinal 1600 mm︱table dimension - cross 800 mm︱table load 1,8 t︱total power requirement kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱

---

The HAAS VF 6 is in good condition and available immediately. Operating hours: 6500h 4th and 5th axis extension in 2008 Perforated grid plate on the milling table included Data connection to CAM retrofitted

x-travel 1600 mm︱y-travel 1250 mm︱z-travel 1000 mm︱table diameter 1600 mm︱spindle turning speed - stepless 10000 U/min︱tool taper HSK 100A ︱tool change unit 60 fach︱rapid traverse 60 m/min︱feed 20 - 15000 mm/min︱table rotation speed 250 U/min︱table load 4 t︱total power requirement kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 5,7 x 5 x 3,8 m︱

---