Milling machines

x-travel 900 mm︱y-travel 770 mm︱z-travel 1000 mm︱Control Siemens 840 D ︱tool taper SK 50 ︱spindle turning speed range 20 - 6000 U/min︱rapid travel x/y/z 60 m/min︱Motor power (60% ED) 30 kW︱max. torque on the spindle (60% ED) 1080 Nm︱pallet size: 630 x 500 mm︱weight of the machine ca. 21,0 t︱dimensions of the machine ca. m︱

---

- CNC-control SIEMENS 840 D - portable handwheel - 2-station pallet changer - autom. horizontal-vertical milling head - 60-station ATC - coolant equipment with paper band filter - coolant thru spindle 80 bar - oil cooler - NC-rotary table 360 deg, type DA 500 EV - Chip conveyor Interference circle diameter 1150 mm

x-travel 4000 mm︱y-travel 1500 mm︱z-travel 3500 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Machine was producing parts of airplane Motors for Rolls Royce. Machine very little used and as new. Machine with 2 pallet tables, diamter 1500 mm 2 x ATC 40 tool changer Automatic milling head 1ºx1º indexing, 37 kW Max. spindle speed 5000 rpm coolant equipment with paper band filter coolant through spindle min./max. 20-60 bar

x-travel 2.000 mm︱y-travel 1.000 mm︱z-travel 800 mm︱Control Fidia C20 CNC︱Main spindle: ︱turning speed range - main spindle 3.200 - 32.000 min/-1︱power capacity - main spindel 6 kW︱tool taper HSK 40 E ︱swivellable B: +/- 110 °︱indexing B: 0,001 °︱rotatable C: +/- 361 °︱spindle diameter in front bearing 45 mm︱distance spindle nose and table max. 896 mm︱work table: ︱table surface area 2.500 x 1.500 x 300 mm︱table height 345 mm︱max. table load 10.000 kg︱T-slots 6x 22 x 250 mm︱Tool-Presetter: ︱number of toolpositions 20 pos.︱

---

CNC-Machiningcenter Universal FIDIA - D 218 - 5-Axis - CNC-Turning-Swivel-Milling-Head (B- & C-Axis) - from Institute for Research and Technology - well cared condition - only ca. 4.000h Spindle hours - incl. 16 tool holders and vice

x-travel 1.270 mm︱y-travel 670 mm︱z-travel 625 mm︱control i-Series Fanuc︱Workingspindle: ︱Max. Speed 8.000 min/-1︱drive devices 11 / 15 ︱max. Torque 191 Nm︱tool taper SK / ISO 40 ︱work table: ︱table surface area 1.400 x 670 mm︱T-slots 5 ︱T-slot - width 18H8 mm︱T-slot - distance 125 mm︱max. table load 1.000 kg︱distance spindle nose and table 150 - 775 mm︱max. workpiece height 580 mm︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK / ISO 40 ︱

---

CNC-Machiningcenter Vertical DOOSAN - Mynx 6500

x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱control Sinumerik 840D Siemens︱distance spindle /table 100 - 500 mm︱Main spindle: ︱turning speeds 8.000 min/-1︱power capacity - main spindel 10,5 kW︱tool taper HSK 63 ︱spindle diameter in front bearing 70 mm︱work table: ︱table surface area 1.000 x 560 mm︱max. table load ca. 1.000 kg︱Tool-Presetter: ︱number of toolpositions 30 pos.︱tool taper HSK 63 ︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 125 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱

---

CNC Machining Center Vertical HERMLE - C 800 V - Top-Condition ! - WITHOUT vices / WITHOUT tooling

x-travel 3000 mm︱y-travel 4000 mm︱z-travel 1500 mm︱Control Heidenhain TNC 430 M ︱total power requirement 120 kVA︱weight of the machine ca. 83,2 t︱dimensions of the machine ca. m︱

---

3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the seller's plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working range Travels X-axis 3000 mm Y-axis 4000 mm Z-axis 1500 mm Max. column passage 2700 mm Max. Distance between work table and spindle nose: Lower edge of ram interface min./max. 660 mm / 2160 mm Workpiece table Length 3000 mm Width 2000 mm Load 4 t/m² T-slots 28 H8 Rapid traverse X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Equipment: CNC control Heidenhain TNC 430 M Milling heads: Straight milling head type FK 120/450 Outside diameter 280 mm Tool holder SK 50 power max. 67 kW max. speed 5000 rpm Coolant supply through the spindle, via adjustable nozzles 1-axis fork-type milling head type FK 100/2D tool holder SK50 power max. 67 kW max. speed 4000 rpm swiveling range A/B axis +105°/-95° Coolant supply via adjustable nozzles Coolant tank 1.000 l Chip conveyor system Change head station Weight specifications: 1 Y-slide 7000 kg 2 ram 10000 kg 3 column 1 8000 kg 4 column 2 8000 kg 5 crossrail 28000 kg 6 Bed/table 20000 kg 7 Hydraulic power unit 1000 kg 8 Cooling unit 1200 kg 9 Coolant tank ??? Total 83200 kg

x-travel 30.000 mm︱y-travel 4.100 mm︱z-travel 1.200 mm︱control 840 D SL Operate Siemens︱Main spindle: ︱turning speed range - main spindle max. 10.000 min/-1︱power capacity - main spindel 42 kW︱tool taper HSK-A100 ︱max. Torque 66 Nm︱swivellable A: +/- 100 °︱rotatable C: +/- 182,5 °︱feeds: ︱rapid traverse ( X / Y / Z ) 40 / 20 / 20 m/min︱rapid traverse A: 16 U/min︱rapid traverse C: 14,5 U/min︱total power requirement 60 kW︱weight of the machine ca. 85 t︱dimensions of the machine ca. 38,0 x 8,0 x 7,0 m︱Documents ︱Chip conveyor ︱

---

5 Axis - CNC - Double Column Travelling Milling Machine FOOKE - Endura 8 LB300/41/12/5-20 - including clamping device and housing

x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱Control Siemens 840 D ︱column daylight 2650 mm︱distance spindle nose and table 2500 mm︱table surface area 6400 x 2250 mm︱table load 50 t︱tool taper ISO 60 ︱spindle turning speed range 5 - 2000 U/min︱table feed 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed (W) 10 - 2000 mm/min︱spindle motor 55 kW︱total power requirement 85 kW︱weight of the machine ca. 125 t︱dimensions of the machine ca. 18 x 9,5 x 6,5 m︱

---

Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg. indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device Machine can be inspected under power, subject to prior notice.

x-travel 620 mm︱y-travel 420 mm︱z-travel 400 mm︱control TNC 124 Heidenhain︱Main spindle: ︱turning speed range - main spindle 50 - 4.000 min/-1︱transmission ratio 2 ︱power capacity - main spindel 6 kW︱tool taper ISO 40 ︱tension force 10 kN︱swivellable manual +/- 45 °︱max. tool diameter 125 mm︱max. tool weight 6 kg︱work table: ︱table surface area 400 x 800 mm︱T-slots 5x 14x80 ︱max. table load 400 kg︱feeds: ︱feed speeds X / Y: 0 - 6.000 mm/min︱feed speeds Z: 0 - 4.000 mm/min︱

---

Tool Room Milling Machine Universal AVIA - FNE 40 Z - incl. 2x workbenches with content - incl. 1x tool cabinet with content - incl. various tool holders - incl. 3x vices - incl. Orion setting device

x-travel 600 mm︱y-travel 400 mm︱z-travel 420 mm︱control TNC 355 Heidenhain︱Main spindle: ︱turning speed range - main spindle 20 - 4.000 min/-1︱power capacity - main spindel 7 kW︱transmission ratio 3 ︱tool taper SK 40 ︱distance spindle /table 127 - 567 mm︱spindle diameter in front bearing 55 mm︱stroke of quill vertical 75 mm︱tool clamping 10 kN︱swivellable +/- 90 °︱work table: ︱table surface area 900 x 458 mm︱T-slots 7x 63 x 14H7 ︱feeds: ︱feed range 1 - 5.000 mm/min︱Feed force 5,4 kN︱

---

Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

x-travel 290 mm︱y-travel 150 mm︱z-travel 330 mm︱table surface area 210 x 600 mm︱tool taper SK 40 ︱total power requirement 9,5 kVA︱weight of the machine ca. 730 kg︱dimensions of the machine ca. 2000 x 2200 x 1655 mm︱

---

The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

x-travel 290 mm︱y-travel 150 mm︱z-travel 330 mm︱table surface area 210 x 600 mm︱tool taper SK 40 ︱total power requirement 9,5 kVA︱weight of the machine ca. 730 kg︱dimensions of the machine ca. 2000 x 2200 x 1655 m︱

---

The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

x-travel 800 mm︱y-travel 630 mm︱z-travel 550 mm︱control TNC 640 Millturn Heidenhain︱Main spindle ︱turning speed range - main spindle max. 12.000 U/min︱power capacity - main spindel 7,5 - 22,5 kW︱max. Torque 140 Nm︱tool taper HSK-A 63 ︱NC-Rotary table: ︱faceplate diameter 280 mm︱T-slots H7 x 50 ︱measuring system ECN 225 ︱swivellable +/-120 °︱Torque max. 180 Nm︱Holding Torque 800 Nm︱max. table load 320 kg︱turning speeds 200 min/-1︱Tool-Presetter: ︱numbers of positions in the tool changer 40 ︱

---

CNC - Travelling Column Milling Machine CHIRON - Mill FX 800

x-travel 2.600 mm︱y-travel 700 mm︱z-travel 700 mm︱control iTNC 530 Heidenhain︱Main spindle: ︱turning speed range - main spindle 20 - 18.000 min/-1︱power capacity - main spindel 35 / 25 kW︱tool taper SK 40 ︱work table: ︱table surface area 2.900 x 700 mm︱max. table load 2.150 kg︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK 40 ︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 130 mm︱max. tool length 300 mm︱max. tool weight 6,0 kg︱feeds: ︱rapid traverse ( X / Y / Z ) 40 m/min︱

---

CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

x-travel 3.000 mm︱y-travel 1.000 mm︱z-travel h: 1.100 / v: 1.000 mm︱control Sinumerik 840 D Siemens︱Main spindle: ︱turning speed range - main spindle 20 - 9.000 min/-1︱power capacity - main spindel 45 kW︱max. Torque 537 / 393 Nm︱tool taper SK 50 ︱swivellable +/- 105 °︱indexing stufenlos / stepless ︱work table: ︱table surface area 3.500 x 1.035 mm︱rotary table diameter 800 mm︱max. workpiece weight 6.000 kg︱Tool-Presetter: ︱number of toolpositions 48 pos.︱tool taper SK 50 ︱max. tool diameter 118 mm︱max. tool-dia with free toolbox 200 mm︱

---

CNC - Travel Column Milling Machine MATEC - 50 HV-3000 - 5 Axis - Swivable-Milling-Head - NC-Rotary Table in Fixed Table - Separating-Wall / Double-Place-System - incl. Spare-Spindle Kessler

x-travel 2.200 mm︱y-travel 560 mm︱z-travel 720 mm︱control iTNC 530 Heidenhain︱turning speed range - milling 20 ~ 12.000 U/min︱tool taper SK 40 ︱power capacity - milling spindle 35 / 25 kW︱tool piece magazine with 100 pos.︱table surface area 2.600 x 600 mm︱rapid traverse X-axis 100 m/min︱rapid traverse Y-axis 50 m/min︱rapid traverse Z-axis 50 m/min︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 130 mm︱max. tool length 300 mm︱max. tool weight 6 kg︱max. table load 2.200 kg︱total power requirement kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 7,0 x 4,2 x 2,7 m︱

---

Travelling column milling machine DECKEL MAHO - DMF 220 Linear - incl. 4th Axis 560mm and tailstock (center height 350mm)

x-travel 2.940 (2x 1.220) mm︱y-travel 500 mm︱z-travel max. 800 mm︱Control TNC 426/430 Heidenhain︱distance spindle nose and table V: 0 - 770 mm︱distance spindle nose and table H: 180 - 980 mm︱Main spindle: ︱turning speed range - main spindle 80 - 8.000 min/-1︱power capacity - main spindel 40 kW︱max. Torque 191 Nm︱spindle diameter in front bearing 70 mm︱swivellable +/- 90 °︱tool taper SK 40 ︱work table: ︱table surface area ca. 3.340 x 650 mm︱T-slots 14 H9 mm︱max. table load 600 kg︱Tool-Presetter: ︱number of toolpositions 22 pos.︱tool taper SK 40 ︱

---

Travelling column machining centre AXA - VHC 2 3000 M NC swivel head, 1° adjustable

x-travel 16000 mm︱y-travel 1250 mm︱z-travel 3200 mm︱Control Heidenhain iTNC 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

The machine was extensively overhauled in 2009. With a new CNC Control make Heidenhain iTNC 530. Guides in the X-axis completely renewed, engines, drives and valves also renewed. An inspection under power in the factory is possible. CNC control Heidenhain iTNC 530i Travels: X axis 16000mm Y axis 1250mm Z axis 3200mm Milling spindle speeds 2000 rpm Swivel-type angle head: 2.5 deg Drive power: 37 KW Note: The machine will be sold without floor plates, tables and chip conveyor.

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱control iTNC 530 Heidenhain︱Main spindle: ︱turning speed range - main spindle 20 - 10.000 min/-1︱power capacity - main spindel 9 / 13 kW︱max. Torque 82 Nm︱tool taper MAS BT 40 ︱swiveling-rotary-table: ︱table surface area 630 x 500 mm︱max. table load 200 kg︱Swivel range -5 / +110 °︱rotation range 360° °︱T-slots 7x 14 x 63 mm︱tool magazin: ︱number of toolpositions 16 pos.︱max. tool weight 6 kg︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 130 mm︱

---

5 Axis CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - swivel-rotary-table : controlled B&C-Axis / only positioning - Operating-Hours.: Power-On: ca. 37.700h / Spindle-Runtime: ca. 10.800h