milling machining centers - horizontal

x-travel 164 mm︱y-travel 210 mm︱z-travel 70 mm︱Control CNC 6000 ︱turning speeds 40000 U/min︱tool adaptor HSK E 25 ︱tool change unit 7-fach ︱total power requirement kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 2,3x1,0x1,9 m︱

---

HSC Milling Machine Portal stand construction for milling and engraving High-frequency spindle HFS 301 40,000 min-1; 3000 watts; HSK 25 E recording Tool length scan Laser sensor system for measuring the workpiece length and workpiece diameter NC controlled part head CNTK 200 center height: 200 mm Clamping device of a groove table Clamping device for clamping round components Coolant circulation system Collet holder Alpha CAM software (AC Mill 2D)

x-travel 250 mm︱y-travel 200 mm︱z-travel 90 mm︱control 5D HSC 6000 ︱A-axis +/- 180 °︱b-axis +25 -15 °︱spindle turning speed range 40.000 U/min︱tool taper HSK 25 E ︱min./max workpiece dia. 3 - 10 mm︱tool change unit 7-fach ︱total power requirement 7 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 0,78 x 1,85 x 1,165 m︱

---

The machine for dental use - suitable for metal, plastic, wood and zirconium blanks - 5 axes simultaneously - Milling spindle HFS 201 quick-change (has been overhauled) - High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts) - Additional tool change magazine with 14 places (linear pick-up system with collision protection) - Tool length scanning - Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code) - W.Loader workpiece changer for up to 30 blanks - Max. height of blanks: 25 mm - Extraction unit for effective disposal of spray mist, graphite and ceramic dust, including: - patented tornado system - partitioning of the work table - central connection to a suction system - coolant circulation system - various clamping devices - Various milling cutters and holders - Various clamping rings - Glass ceramic holder 2 places Solid steel construction, FEM-optimised, all slides guided on hardened and ground roller bearing elements. Driven by backlash-free ball screw drive in precision design, Low-maintenance due to depot lubrication. All mechanical elements are additionally protected by bellows. Machine enclosure with special glass window. Pre-equipped for chip and dust extraction. Operating hours: 13,500 h / as good as new condition The technical data has been compiled to the best of our knowledge, for which cannot accept any liability.

x-travel 500 mm︱y-travel 400 mm︱z-travel 400 mm︱working length X mm︱working length Y mm︱working depth Z mm︱Workpiece dimensions mm︱Workingpiece thickness from to mm︱Motor output kW︱Number of axles St.︱Number of milling agregates St.︱Number of heads vertical St.︱Number of heads horizontal St.︱Overall size mm︱Weight kg︱Year ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 450 mm︱y-travel 400 mm︱z-travel 400 mm︱ ︱control Heidenhain 355 ︱cooling ︱total power requirement 4 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. m︱

---

x-travel 635 mm︱y-travel 500 mm︱z-travel 630 mm︱b-axis 360 °︱rapid traverse 15 m/min︱spindle turning speed - stepless bis 4000 U/min︱spindle drive 18,7 kW︱toolpiece magazine: chain magazine 108 Stück︱tool diameter 125 mm︱wotkpiece diameter with 2 vacant positions 175 mm︱workpiece length 400 mm︱weight of tools max. 10 (15) kg︱table-size 500 x 630 mm︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱

---

Control Dialog 4 ︱Table length 1000 mm︱Table width 500 mm︱Spindle taper ISO 40 ︱

---

x-travel 550 mm︱y-travel 180 mm︱z-travel 400 mm︱table-size 750 x 200 mm︱feed range - horizontal 15 - 750 mm/min︱feed range - vertical 5 - 250 mm/min︱rapid traverse 5,5 m/min︱arbor support 350 mm︱total power requirement kW︱weight of the machine ca. 1,35 t︱dimensions of the machine ca. 2 x 1,45 x 1,9 m︱

---

x-travel 900 mm︱y-travel 340 mm︱z-travel 380 mm︱total power requirement 3 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2*2*2 m︱

---

Horizontal console milling machine Spindle SK 40 Speed range 30-1500 min-1 Feed rates 4 / 11 to 230 / 570 mm/min Weight approx. 1700 kg Working area: 900 x 340 x 380 Control: Table size 1200 x 250

x-travel 1250 mm︱y-travel 500 mm︱z-travel 500 mm︱table-size 1800x320 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱

---

horizontal for platt milling

x-travel 700 mm︱y-travel 225 mm︱z-travel 400 mm︱turning speed range - horizontal 45 - 1800 U/min︱taper MK SK40 ︱table surface area 1000 x 300 mm︱total power requirement 3,8 kW︱weight of the machine ca. 1,75 t︱dimensions of the machine ca. 1,3 x 1,7 x 1,8 m︱

---

x-travel / mm︱y-travel / mm︱z-travel / mm︱table surface area 700 x 200 mm︱total power requirement kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. m︱

---

x-travel ca. 900 mm︱y-travel ca. 280 mm︱z-travel ca. 400 mm︱total power requirement 5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5*2,5*2,5 m︱

---

No. 5100: 1 used vertical milling machine FRITZ WERNER, type FV 2

x-travel 2000 mm︱y-travel 850 mm︱z-travel 710 mm︱total power requirement kW︱weight of the machine ca. 6800 kg︱dimensions of the machine ca. m︱

---

x-travel 500 mm︱y-travel 240 mm︱z-travel 530 mm︱Control SIEMENS 802S base line ︱table-size 750 x 210 mm︱spindle taper ER32 ︱throat 260 mm︱spindle turning speed range 150 - 8.600 U/min︱feed speeds 2.000 mm/min︱total power requirement 3,0 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,9 x 1x2 x 1,9 m︱

---

Machine comes from a university and was used sporadically. including vice including electric Handwheel including work light including coolant pump including machine feet including central lubrication Stable CNC milling machines with professional Siemens 802 S baseline control, ideal for users in mold making Ball screw spindle from HIWIN in all axes Solid, precise cross table, large dimensions and precisely surface-machined. Heavy, solid cast design Adjustable wedge strips Very wide speed range Continuously variable drive Electronic handwheel reduces setup time to a minimum Compact housing design Foldable housing side parts for easy access to the machine The work area is clearly visible from three sides thanks to clear Macrolon panes Base is designed on two sides. Front with access to the coolant tank Rear with access to the electronics and the Optimum CNC controller IV Siemens Micromaster as a frequency converter All doors with safety switches ER32: for high speed and normal machining Linear guide in the Z axis Central lubrication

x-travel 980 mm︱y-travel 1080 mm︱z-travel 280 mm︱Control ︱table-size 1.125 x 1.700 mm︱table height 800 mm︱diameter 435 mm︱spindle pitch 16 x 5 mm︱total power requirement kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 2,08 x 1,98 x 2,0 m︱

---

Accessories: - Tool changing station - TS20 probe - Clamping system

travel -x axis 760 mm︱travel -y axis 510 mm︱travel -z axis 610 mm︱control for program Ultimax 4 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 24 ︱tool taper SK40 ︱table-size 1.020 x 510 mm︱

---

Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMX30 | VMX-30

travel -x axis 705 mm︱travel -y axis 425 mm︱travel -z axis 610 mm︱control Heidenhain - iTNC 530 ︱turning speed range 50 - 20.000 U/min︱numbers of positions in the tool changer 32 ︱tool taper SK30 ︱

---

Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - swivel rotary table (4th + 5th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M

travel -x axis 6.000 mm︱travel -y axis 1.000 mm︱travel -z axis 800 mm︱control Heidenhain - iTNC530 ︱distance vertical spindle / table 1.000 mm︱table-size 3.300 x 1.050 mm︱number of T-slots 7 ︱T-slot - width 125 ︱

---

Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000

x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool changer: ︱number of tool places 32 Pos.︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,4 t︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 73,730 h - Spindle hours: 16,362 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,2 t︱

---

In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 600 mm︱y-travel 400 mm︱z-travel 420 mm︱Control Heidenhain Tnc ︱table-size 900 x 460 mm︱turning speeds 4000 U/min︱total power requirement kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 3 x 2 x 2 m︱

---

x-travel 600 mm︱y-travel 350 mm︱z-travel 140 mm︱table surface area 700 x 300 mm︱spindle taper ISO 40 ︱spindle turning speed range 100 - 4000 U/min︱distance spindle center to column 395 mm︱distance spindle nose and table min. 170 -max. 550 mm︱control TNC 407 ︱milling feeds 3 + 2000 mm/min︱rapid traverse 5000 mm/min︱spindle drive 5,5 kW︱total power requirement 9 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 2,5 x 1,8 x 2,2 m︱

---

• control HEIDENHAIN TNC 407,

x-travel 1500 mm︱y-travel 1000 mm︱z-travel 700 mm︱table: 1500 x 1000 mm︱control FIDIA ︱weight of the machine ca. 11 t︱

---

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Year ca, 1988 ︱tool taper MK 3 ︱weight of the machine ca. 2,5 t︱digital ︱cross-moving table ︱feed: ︱

---

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++