'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Gear Shaping Machine

          Machinelist: Gear Shaping Machine


          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine LORENZ SN 4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23230 · Gear Shaping Machine

          LORENZ - SN 4 - - ca 1981 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱feed range 0,008 - 0,4 mm/Hub︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            feed range 0,008 - 0,4 mm/Hub
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :

          Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ SN 4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24154 · Gear Shaping Machine

          LORENZ - SN 4 - - ca 1981 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱feed range 0,008 - 0,4 mm/Hub︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            feed range 0,008 - 0,4 mm/Hub
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :

          Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER P 1200 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23259 · Gear Shaping Machine

          GLEASON- PFAUTER - P 1200 S - - 2008 - Siemens 840D Powerline

          Technical details
          max. wheel diameter 1200 mm︱gear width 350 mm︱max. module 16 ︱min. module 0,5 ︱max. workpiece diameter 1400 mm︱table diameter 1200 mm︱table hole 300 mm︱control Siemens 840D Powerline︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 5x3x3,8 m︱
          Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table bore - Set of adjusting wedges - Monitoring devices - Warm-up programme - Network connection (Ethernet) - 19" flat control panel OP 015A - Offline version "dialogue programming - Vapour separator make "3nine" type KLARA - Machine installation under floor - Rinsing gun - Mounting device - Cutting wheel holder ( 3 pieces ) - Cutting wheel holder for sheep cutting wheels - Cutting wheel holder for sheep cutting wheels - Special cutting wheel holder - Preparation for retrofitting paper belt filter system - Measuring device for machine P 1200 S - Clamping base body - BDE/MDE interface in the machine control cabinet Modification of vapour separator make "3nine" type Klara type EMMA Working range and technical data: Nominal workpiece diameter External toothing. . . . . . . . 1.200 mm Internal gearing. . . . . . . . 1.200 mm Largest workpiece circulation Ø without counter stand... 1.400 mm Nominal machine module approx. - with hydraulic impact head H1... 16 mm Shaping spindle stroke rate range - with hydraulic shaping head H1 max. 80 min-1 Largest toothing width - with hydraulic shaping head H1... 350 mm Smallest pitch height of the hydrostatic screw guide - with hydraulic shaping head H1... 850 mm Smallest/largest distance between tool and workpiece axis - with hydraulic shaping head H1... 0 - 750 mm Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm Lowest shaping spindle position above table with hydraulic shaping head H1 ** with upper position Shaping stroke... 560 mm Column side offset range - with hydraulic pusher head H1... +/- 50 mm Mould mounting cone - with hydraulic shaping head H1 - HSK-80(hollow shank taper according to DIN 69063) Workpiece with external gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. external Ø 1.200 mm, Workpiece with internal gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. circulation Ø 1.400 mm, - max. internal Ø 1.200 mm, - max. shaping wheel Ø 260 mm, - Mounting in shaping spindle HSK-80, - Slide travel; X/Y/Z- 750 /100 / 1.100 mm, Workpiece table: - Outer Ø 1.200 mm, - bore 300 mm, - max. load 150 kN, - Cooling unit, Küma, type OWT600-3KK, year 2008, - Hydraulic unit, manufactured by Parka, - Centrifuge, made by Steimel, - Air filter, Indusa, type EL4001NTDASECL/O, version AOO, max. air capacity 4.000 m³/h
            max. wheel diameter 1200 mm
            gear width 350 mm
            max. module 16
            min. module 0,5
            max. workpiece diameter 1400 mm
            table diameter 1200 mm
            table hole 300 mm
            control Siemens 840D Powerline
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 5x3x3,8 m
            Description :
            Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of
            internally and externally cylindrical gears with internal and external teeth
            and other rolling profiles and moulds profiles and moulds that regularly occur
            on the cylindrical workpiece circumference and for the production of profiles
            in the single part process.

            Special version with hydraulic shaping head H1

            SCOPE OF EQUIPMENT:

            - Basic machine P1200S, Siemens 840D Powerline (XP)
            - Hydraulic shaping head H1
            - Signal light (3-colour)
            - Extended software for fault diagnosis
            - Telephone diagnosis system
            - Chip disposal through table bore
            - Set of adjusting wedges
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - 19" flat control panel OP 015A
            - Offline version "dialogue programming
            - Vapour separator make "3nine" type KLARA
            - Machine installation under floor
            - Rinsing gun
            - Mounting device
            - Cutting wheel holder ( 3 pieces )
            - Cutting wheel holder for sheep cutting wheels
            - Cutting wheel holder for sheep cutting wheels
            - Special cutting wheel holder
            - Preparation for retrofitting paper belt filter system
            - Measuring device for machine P 1200 S
            - Clamping base body
            - BDE/MDE interface in the machine control cabinet
            Modification of vapour separator make "3nine" type Klara type EMMA

            Working range and technical data:

            Nominal workpiece diameter
            External toothing. . . . . . . . 1.200 mm
            Internal gearing. . . . . . . . 1.200 mm

            Largest workpiece circulation Ø without counter stand... 1.400 mm

            Nominal machine module approx.
            - with hydraulic impact head H1... 16 mm

            Shaping spindle stroke rate range
            - with hydraulic shaping head H1 max. 80 min-1

            Largest toothing width
            - with hydraulic shaping head H1... 350 mm

            Smallest pitch height of the hydrostatic screw guide
            - with hydraulic shaping head H1... 850 mm

            Smallest/largest distance between tool and workpiece axis
            - with hydraulic shaping head H1... 0 - 750 mm

            Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm
            Lowest shaping spindle position above table with hydraulic shaping head H1
            ** with upper position Shaping stroke... 560 mm

            Column side offset range - with hydraulic pusher head H1... +/- 50 mm
            Mould mounting cone - with hydraulic shaping head H1
            - HSK-80(hollow shank taper according to DIN 69063)

            Workpiece with external gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. external Ø 1.200 mm,

            Workpiece with internal gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. circulation Ø 1.400 mm,
            - max. internal Ø 1.200 mm,
            - max. shaping wheel Ø 260 mm,
            - Mounting in shaping spindle HSK-80,
            - Slide travel; X/Y/Z- 750 /100 / 1.100 mm,

            Workpiece table:
            - Outer Ø 1.200 mm,
            - bore 300 mm,
            - max. load 150 kN,
            - Cooling unit, Küma, type OWT600-3KK, year 2008,
            - Hydraulic unit, manufactured by Parka,
            - Centrifuge, made by Steimel,
            - Air filter, Indusa, type EL4001NTDASECL/O,
            version AOO, max. air capacity 4.000 m³/h
          Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON-Pfauter GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24003 · Gear Shaping Machine

          GLEASON-Pfauter - GP 130 S - - 2005 - Siemens 840 D

          Technical details
          max. wheel diameter 130 mm︱gear width 25 mm︱max. module 4 ︱min. module 0,5 ︱Control Siemens 840 D︱strokes - infinitely variable 500-2500 Hub/min︱stroke 30 mm︱work-spindle diameter 85 mm︱total power requirement 49 kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 6,4x4,5x4,4 m︱
          Counterhold without center hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations
            max. wheel diameter 130 mm
            gear width 25 mm
            max. module 4
            min. module 0,5
            Control Siemens 840 D
            strokes - infinitely variable 500-2500 Hub/min
            stroke 30 mm
            work-spindle diameter 85 mm
            total power requirement 49 kW
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 6,4x4,5x4,4 m
            Description :
            Counterhold without center
            hydraulically operated counter arm and
            Linear guides.
            For automatic ring loader, with 4 stations

          Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 424


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24136 · Gear Shaping Machine

          LORENZ - LS 424 - - 1989 - BWO CNC

          Technical details
          max. wheel diameter 420 mm︱gear width 120 mm︱max. module 8 ︱min. module 0,5 ︱control BWO CNC︱no. of strokes 32-800 Hub/min︱total power requirement 50 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 5,3 x 3,9 x 3,4 m︱
          Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC
            max. wheel diameter 420 mm
            gear width 120 mm
            max. module 8
            min. module 0,5
            control BWO CNC
            no. of strokes 32-800 Hub/min
            total power requirement 50 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 5,3 x 3,9 x 3,4 m
            Description :
            Machines increase 100 mm intermediate plate
            automatic Hublageverstellung
            automatic Hublängeverstellung
            5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль трейдера: Emuk GmbH Werkzeugmaschinen
          Спеціаліст Für Verzahnungsmaschinen

          Зв'язатися з трейдером



            Emuk GmbH Werkzeugmaschinen
          Спеціаліст Für Verzahnungsmaschinen

           Siemensstrasse 24 a
            76316 - Мальш
            Німеччина
            + 49 (0) 7246 1392 "> + 49 (0) 7246 1392
            + 49 (0) 7246 1394
            info@emuk.de
            www.emuk.de

          Профіль Трейдера


          Емук - спеціаліст для зубчастих машин

          EMUK GmbH є міжнародною компанією, яка займається вживаними верстатами. Для більш ніж 30 років ми expot та імпортуємо машини навколо світу. Наш склад є 3000 квадратний метр, і ми постійно маємо більше, ніж 350 машини для продажу.

          Ми спеціалізуємося на "Gear Machines" (тестер зубчастих коліс, різання, шліфування, різання ...). Будь ласка, повідомте нам, якщо ви зацікавлені в покупці або продажі деяких машин.

          Використовуються зубчасті машини бренду Pfauter ЛоренцReishauerKöpfer і т.д.

          Emuk Werkzeugmaschinen GmbH - Siemensstraße 24 - 76316 Malsch bei Karlsruhe Німеччина 
          Телефон: + 49-7246-1392 - факс: + 49-7246-1394 -E-Mail: info@emuk.de.





          Find the best used gear shaping machine for your needs!
          A gear shaping machine for all your metalworking needs

          A gear shaping machine is used for the cutting of teeth in gears of a variety of shapes and sizes. If your business demands large scale gear production then a gear shaping machine is an invaluable piece of equipment. Whether you need to manufacture internal or external gears a gear shaping machine can improve the efficiency of your business. Buying new equipment can be pricey so used machines are a great solution for those interested in a budget-friendly option.

          Maximize your efficiency with a gear shaping machine

          A high quality gear shaping machine offers business owners reliability precision and efficiency. Most modern machines have high automation levels freeing you to devote your time to other projects while your gear shaping machine performs without issue. Money can be a problem when outfitting a workplace but buying used metalworking equipment is an ideal solution. LagerMaschinen offers your great quality products in a convenient online location. Browse LagerMaschinen's extensive list of used machinery to find the best fit for your needs.

          Save time and money while shopping at LagerMaschinen

          Shopping for industrial machinery can be a tedious and overwhelming process. Comparing prices and features is time-consuming and daunting. Save yourself time and money by looking for your next piece of equipment at LagerMaschinen. The user-friendly forum of used industrial equipment allows you to shop for machinery by price features and location. Whether you're in the market for a gear shaping machine or any other industrial machines LagerMaschinen offers you a great selection of high-quality used machinery in an easy-to-use forum.

          Emuk GmbH Werkzeugmaschinen Spezialist Für Verzahnungsmaschinen  76316 - Malsch Siemensstrasse 24 a Deutschland
          Emuk GmbH Werkzeugmaschinen Spezialist Für Verzahnungsmaschinen

          Siemensstrasse 24 a



          Contact Trader


            Emuk GmbH Werkzeugmaschinen Spezialist Für Verzahnungsmaschinen
           Siemensstrasse 24 a
            76316 - Malsch
            Deutschland
            +49 (0) 7246 1392
            +49 (0) 7246 1394
            info@emuk.de
            www.emuk.de
            Contact person:

            Die EMUK GmbH ist ein international tätiges Unternehmen für den Handel mit gebrauchten Werkzeugmaschinen. Seit über 40 Jahren exportieren und importieren wir Werkzeugmaschinen weltweit.Wir sind spezialisiert auf den Handel mit gebrauchten Verzahnungsmaschinen der Marken Pfauter Lorenz, Reishauer, Köpfer und vielen weiteren Fabrikaten.
          Wir haben auf 3.000 qm ständig Maschinen vor Ort; gerne können Sie uns kontaktieren.




          Machine category


          Abläng- und Zentriermaschine · Absaugung · Abwälzfräs- und Stoßmaschine -kombiniert · Abwälzfräser · Anreißplatte · Aufspannwinkel · Ausklinkmaschine · Auswuchtmaschine · Bearbeitungszentrum - Vertikal · Bohrer · Bohrerschleifmaschine · CNC Drehmaschine · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Entgratmaschine · Ersatzteile · Filteranlage · Fixatoren · Flachschleifmaschine - Horizontal · Fräs- und Drehwerkzeuge · Fräskopf senkrecht · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Frässtichel-Schleifmaschine · Futter · Förderband · Gewinde-Schnecken-Schleifmaschine · Gewindewalzmaschine · Honmaschine - Innen - Horizontal · Hydraulikaggregat · Härteprüfer · Kantenfräsmaschine · Kantenschleifmaschine · Kegelradfräsmaschine-Bogenverzahnung · Kegelradhobelmaschine · Kippvorrichtung · Kniehebelpresse - Einständer · Kompressor · Koordinatenmessmaschine · Kühlmittelanlage · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Messerkopf · Messmaschine · Meßmittel · Motor · Nuten-Stossmaschine · Nutenziehmaschine · Planscheibe · Prägepresse - Einständer - hydraulisch · Pumpenaggregat · Radialbohrmaschine - transportabel · Reitstock · Richtpresse - Horizontal · Rundschleifmaschine - Universal · Rundtaktmaschine · Rundtischflachschleifmaschine - Vertikal · Räumnadeln · Schleif- und Läppmaschine · Schleifscheibenflansch · Schneckenfräsmaschine · Schneckenradprüfmaschine · Schraubenkompressor · Schraubstock · Schweißanlage · Schwenkbiegemaschine · Senkrecht - Stoßmaschine · Spannfutter · Spannmittel · Spiralkegelradschneidmaschine · Stoßmaschine - Vertikal · Sägezentrum · Tafelschere - mechanisch · Teilapparat · Transformator · Vertikal - Stoßmaschine · Verzahnungsmeßmaschine · Werkzeug Voreinstellgerät · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugschleifmaschine · Werkzeugschrank · Wälzfräser · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsautomat · Zubehör · Zweiflanken-Wälzprüfmaschine · Ölkühlgerät · Ölnebel-Abscheider ·