Gear Hobbing Machine - Horizontal
Machinelist: Gear Hobbing Machine - Horizontal
Gear Hobbing Machine - Horizontal
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-19056 · Gear Hobbing Machine - Horizontal
BARBER COLMAN - 16 - 16 - - ca. 1980 -
Technical details
Datasheet
Request / Contact
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1643 · Gear Hobbing Machine - Horizontal
GLEASON-PFAUTER - P90 - - 2015 - Siemens - Sinumerik 840 D
Technical details
Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 90 | P-90 | Gleason Pfauter P90
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1640 · Gear Hobbing Machine - Horizontal
GLEASON-PFAUTER - P60 - - 2014 - Siemens - Sinumerik 840 D
Technical details
Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 60 | P-60 | Gleason Pfauter P60
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-E23022 · Gear Hobbing Machine - Horizontal
GLEASON- PFAUTER - P 60 - - 2002 -
Technical details
- IVW GMBH
- Niederrheinstr.298
- 40489 Düsseldorf
- Deutschland
-
(0049)211-4184428
(0049)211-4184430 -
cd@ivwgmbh.com
www.ivwgmbh.com
#1088-E00864 · Gear Hobbing Machine - Horizontal
PFAUTER - P100 - - 1999 - Siemens 840 C
Technical details
- IVW GMBH
- Niederrheinstr.298
- 40489 Düsseldorf
- Deutschland
-
(0049)211-4184428
(0049)211-4184430 -
cd@ivwgmbh.com
www.ivwgmbh.com
#1088-E00863 · Gear Hobbing Machine - Horizontal
PFAUTER - P100 - - 1998 - Siemens 840 C
Technical details
- IVW GMBH
- Niederrheinstr.298
- 40489 Düsseldorf
- Deutschland
-
(0049)211-4184428
(0049)211-4184430 -
cd@ivwgmbh.com
www.ivwgmbh.com
#1088-E00862 · Gear Hobbing Machine - Horizontal
PFAUTER - P100 - - 1997 - Siemens 840 C
Technical details
- IVW GMBH
- Niederrheinstr.298
- 40489 Düsseldorf
- Deutschland
-
(0049)211-4184428
(0049)211-4184430 -
cd@ivwgmbh.com
www.ivwgmbh.com
#1088-E00861 · Gear Hobbing Machine - Horizontal
PFAUTER - P100 - - 1995 - Siemens 840 C
Technical details
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-E23084 · Gear Hobbing Machine - Horizontal
PFAUTER - PE 125 H - - 1992 - Bosch CC 220
Technical details
Machine in very nice condition! More machines under www.emuk.info
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-473370a · Gear Hobbing Machine - Horizontal
MIKRON - A 35/36 CNC - - 1992 -
Technical details
- Isabelle Knops
- Opladener Str. 126
- 40789 Monheim am Rhein
- Deutschland
-
+49 (0)2173-4999611
+49 (0)2173-8546560 -
isabelle.knops@isabelleknops.com
www.isabelleknops.com
#2013-E0450 · Gear Hobbing Machine - Horizontal
PFAUTER/RICHARDON - P 253 CNC - - 1985/2002 - SINUMERIK 840 C
Technical details
5-axis gear hobbing machine / Brand: PFAUTER / Type: P 253 CNC Original year of construction: 1985, Modernization: 2002 (RICHARDON GmbH) The retrofit in 2002 to a 5-axis control system - SINUMERIK 840 C - was carried out by RICHARDON GmbH and included: Modification of the drive kinematics, i.e. partial and differential change gears have been removed. The axles were fitted with digital drives. Most of the mechanics were removed. The milling head was given a tangentil axis. The machine can be inspected by appointment under power. Condition: ready for immediate use. TECHNICAL DATA: Working area: - Max. Module in steel with approx. 600 N/mm² tensile strength: 6 mm - Straight gears: * Max. Tool diameter: 250 mm * Max. Axial slide travel: 250 mm - Min. Number of workpiece teeth: 4 Workspace dimensions: - Diameter of the workpiece table: 250 mm - Diameter of the table bore: 63 mm - Diameter of the workpiece mandrel: 30 mm - Max. Gear hobber: * Diameter: 130 mm * Length: 160 mm - Diameter of the milling arbours: 22, 27, 32, 40 mm - Centre distance between milling cutter and workpiece: * Min. Distance: 10 mm * Max. Distance: 210 mm - Mounting cone for cutter arbours: 4 Morse taper - Max. Milling cutter displacement: 115 mm Speeds and feeds: - Milling cutter speeds: * Five-stage V-belt pulley, adjustable in stages: 125 - 400 rpm * DC main drive: 100 - 400 rpm - Axial feed: 0,63 - 6,30 mm/WU - Radial feed: 0,25 - 2,50 mm/WU - Tangential feed: 0,20 - 2,00 mm/WU Electrical equipment: - Operating voltage: 400 V three-phase - Control voltage: 230 V alternating current - Magnet voltage: 24 V direct current - Frequency: 50 Hz - Connected load of the machine: approx. 40 kVA Electrical cabinet with integrated cooler for temperature control. Weight and space requirements: - Machine weight: approx 3.500 kg - Length/Width/Height: 3,74 x 2,6 x 2,6 m There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-448351 · Gear Hobbing Machine - Horizontal
MIKRON - A 33/1 - - 1985 -
Technical details
M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-482607 · Gear Hobbing Machine - Horizontal
MIKRON - A 33/0 - - 1982 -
Technical details
- Zuefle GmbH
- Levi-Strauss-Str. 121
- 97232 Giebelstadt
- Deutschland
-
+49 (0)9334-978608-0
+49 (0)9334-978608-2 -
info@zuefle.com
www.zuefle.com
#1139-00321 · Gear Hobbing Machine - Horizontal
MIKRON - M122.01 - - 1980 -
Technical details
We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23254 · Gear Hobbing Machine - Horizontal
WMW - ZFWZ 250 x 5A - - 1975 -
Technical details
Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)
Datasheet
Request / Contact
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-E23086 · Gear Hobbing Machine - Horizontal
KOEPFER - 172 - - 1972 -
Technical details
- Kurt Steiger Werkzeugmaschinen GmbH
- Flachstr. 11
- 65197 Wiesbaden
- Deutschland
-
+49 (0) 611/421047
+49 (0) 611/421040 -
info@kurt-steiger.de
www.kurt-steiger.de
#2043-26365B · Gear Hobbing Machine - Horizontal
KOEPFER - 135 - - 1968 -
Technical details
Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm
Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm
Gr. to fraesender Ø Magazine: 40 mm
Gr. Milling length minus gate: 75 mm
Gr. Workpiece length with magazine: 75 mm
Gr. Depth: 4 mm
Gr. Module: 1.25
KL. being milled tooth number: 3
Main spindle hole: 18 mm
Clamping Collet clamping area: 3-18 mm
I9cyejl
9 cutter speed: 222-1410 RPM
10 longitudinal feeds: 0.031-1.25 mm
Electr. Supply: 380 V, 1 kW
Weight: 850 kg
Space requirements: 1050 x 700 x 1500 mm
Datasheet
Request / Contact
- Emuk Maschinenhandel GmbH
- Siemensstrasse 24
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 943161
-
info@emuk.info
www.emuk.info
#2070-24039 · Gear Hobbing Machine - Horizontal
KOEPFER - 170 - - -
Technical details
Gear Hobbing Machine - Vertical
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20171 · Gear Hobbing Machine - Vertical
KOHCHIYAMA TECH - SH-55 - - 2014 - FANUC 31i MODEL B
Technical details
Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-20040 · Gear Hobbing Machine - Vertical
LIEBHERR - LC 3000 CNC - - 2009 - Siemens 840D
Technical details
- CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head 2 machines available
Datasheet
Request / Contact
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-E23258 · Gear Hobbing Machine - Vertical
GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D
Technical details
Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program "Milling in single-part process" - Switching the machine (dry/wet) - Counterholder tip - travelling - - Magnetic roller - Clamping upper part - complete - Clamping device - complete - Special chip separator - Special chip separator - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software Free travelling counterholder - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1,200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task Smallest/largest distance between milling cutter and workpiece axis... 100 / 750 mm Largest axial slide path... 1,000 mm (special design) Largest clampable hob cutter - Ø 450 mm Length... 500 mm Swivelling range of the milling head... + 30/- 45º Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter movement... 450 mm Table diameter... 1,200 mm Table bore - Ø 300 mm Depth... 875 mm Maximum table load approx... 15,000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1,200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm, - Milling head swivelling angle... +A/-A-30/15 degrees, - Hydraulic unit, made by Parker,
Datasheet
Request / Contact
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-E23256 · Gear Hobbing Machine - Vertical
GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D PowerLine
Technical details
Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjustable wedges - Dialogue program "Milling in single-part process" - Magnetic roller - Special chip separator - Counterholder sleeve - Holder for oscillating pressure bell - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software for free movement of counterholder - Measuring device for P1200 - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1.200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task. - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm - Largest axial slide path... 1.000 mm (special design) - Largest clampable hob cutter - Ø... 450 mm - Length... 500 mm - Swivelling range of the milling head... .+ 30/- 45º - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063) - Largest milling cutter movement... 450 mm - Table diameter . . . . . . . .. .1.200 mm - Table bore - Ø... 300 mm - Depth... 875 mm - Maximum table load approx... 15.000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1.200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm, - Milling head swivelling angle +A/-A: 30/15 degrees, - Hydraulic unit, Parker, - filter, Indusa, type DL2500N Jet, Year of manufacture 2015, max. air capacity 2.500 m³/hour.
Datasheet
Request / Contact
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03264 · Gear Hobbing Machine - Vertical
GLEASON- PFAUTER - P 1200 - - 2008 - Simens 840 D PL
Technical details
Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program “Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03266 · Gear Hobbing Machine - Vertical
GLEASON- PFAUTER - P2000/2400 - - 2008 - Sinumerik 840 D
Technical details
machine can be used only for internal gears - dry cutting type Equipment/accessories: - column increased - internal head IKF2 - big clamping table - documentation
- 1
- 2
TOP Manufacturer:
PFAUTER - MIKRON - KOEPFER - GLEASON-PFAUTER - PFAUTER/RICHARDON - WMW - BARBER COLMAN - GLEASON- PFAUTER -