'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Cylindrical Grinding Machine - Universal

          Machinelist: Cylindrical Grinding Machine - Universal


          Cylindrical Grinding Machine - Universal

          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S33


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8282 · Cylindrical Grinding Machine - Universal

          STUDER - S33 - - 2010 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Machine in very good condition run in one shift (20,000 switch-on hours). Available from January 2024 Fanuc 0i-TD control system Centre distance 650mm Centre height 175mm Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off Cross axis X travel 285mm Feed rate 0.001-10,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm Longitudinal axis Z Travel 800mm Feed rate 0.001-20,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm H1 wheelhead with B-axis and 1° Hirth serration Three tool positions Swivelling range -15 to +225° Pos T2 - External grinding with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s Cone 1:10, nominal Ø 63mm Swivelling measuring probe Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21 with oil-air lubrication and water cooling Dressing device, not controlled, movable in X, with dressing tool holder for 2 dressing tools MK1, height-adjustable Workpiece headstock, mounting cone MK4 Spindle nose Ø 70mm, spindle passage Ø 26mm Manual spindle locking, without monitoring C-axis, accuracy +/- 0.5° Workpiece drive 3kW, speed 1-1,500 rpm Pneumatic lifting Equipment: Dittel S6000 electronic grinding detection system with gauging sensors on both table and headstock Accessories: 2-circuit hydraulics 3nine sanding mist extraction system Automatic paper belt filter Flow feed, pumps and tank 375 litres Water cooling circuit 100 litres for sanding drives Documentation
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            Machine in very good condition
            run in one shift (20,000 switch-on hours).

            Available from January 2024

            Fanuc 0i-TD control system


            Centre distance 650mm
            Centre height 175mm
            Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off

            Cross axis X travel 285mm
            Feed rate 0.001-10,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            Longitudinal axis Z Travel 800mm
            Feed rate 0.001-20,000mm/min
            Direct, linear absolute measuring system, resolution 0.0001mm

            H1 wheelhead with B-axis and 1° Hirth serration
            Three tool positions
            Swivelling range -15 to +225°

            Pos T2 - External grinding with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm

            Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm
            Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
            Cone 1:10, nominal Ø 63mm
            Swivelling measuring probe

            Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm
            Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21
            with oil-air lubrication and water cooling

            Dressing device, not controlled, movable in X,
            with dressing tool holder for 2 dressing tools MK1, height-adjustable

            Workpiece headstock, mounting cone MK4
            Spindle nose Ø 70mm, spindle passage Ø 26mm
            Manual spindle locking, without monitoring
            C-axis, accuracy +/- 0.5°
            Workpiece drive 3kW, speed 1-1,500 rpm
            Pneumatic lifting


            Equipment:
            Dittel S6000 electronic grinding detection system
            with gauging sensors on both table and headstock


            Accessories:
            2-circuit hydraulics
            3nine sanding mist extraction system
            Automatic paper belt filter Flow feed, pumps and tank 375 litres
            Water cooling circuit 100 litres for sanding drives
            Documentation



        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S140


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10047 · Cylindrical Grinding Machine - Universal

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          grinding diameter 120 mm︱grinding length 110 mm︱centre height 60 mm︱x-axis 300 mm︱internal diameter 100 mm︱grinding depth max 300 mm︱swing diameter 120 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱grinding diameter max. 120 mm︱grinding wheel diameter 400 mm︱grinding wheel width 32 mm︱grinding wheel hole diameter 127 mm︱grinding wheel speeds 3150 U/min︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱
          two 120mm internal grinding spindels 60.000 and 90.000 rpm installed DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed OD grinding dia 120 mm OD grinding legth 100 mm simultanious ID - OD operation X2 = OD travel X1 = IDtravel
            grinding diameter 120 mm
            grinding length 110 mm
            centre height 60 mm
            x-axis 300 mm
            internal diameter 100 mm
            grinding depth max 300 mm
            swing diameter 120 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            grinding diameter max. 120 mm
            grinding wheel diameter 400 mm
            grinding wheel width 32 mm
            grinding wheel hole diameter 127 mm
            grinding wheel speeds 3150 U/min
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            Description :
            two 120mm internal grinding spindels 60.000 and 90.000 rpm installed
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
            OD grinding dia 120 mm
            OD grinding legth 100 mm
            simultanious ID - OD operation
            X2 = OD travel
            X1 = IDtravel


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S30 lean PRO


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24010 · Cylindrical Grinding Machine - Universal

          STUDER - S30 lean PRO - - 1998 - GE Fanuc 16 T

          Technical details
          grinding diameter 350 mm︱grinding length 1000 mm︱centre height 175 mm︱Control GE Fanuc 16 T︱workpiece weight 130 kg︱internal grinding spindle rev.-stepless 60.000 U/min︱total power requirement 22,5 kW︱weight of the machine ca. 5,1 t︱dimensions of the machine ca. 3x2,4x1,85 m︱
            grinding diameter 350 mm
            grinding length 1000 mm
            centre height 175 mm
            Control GE Fanuc 16 T
            workpiece weight 130 kg
            internal grinding spindle rev.-s. 60.000 U/min
            total power requirement 22,5 kW
            weight of the machine ca. 5,1 t
            dimensions of the machine ca. 3x2,4x1,85 m


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S20-2


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-P89 · Cylindrical Grinding Machine - Universal

          STUDER - S20-2 - - 1987 -

          Technical details
          grinding diameter 200 mm︱grinding length 400 mm︱centre height 100 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            grinding diameter 200 mm
            grinding length 400 mm
            centre height 100 mm


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Cylindrical Grinding Machine - Universal STUDER S30-1


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8254K · Cylindrical Grinding Machine - Universal

          STUDER - S30-1 - - 1987 -

          Technical details
          grinding diameter 350 mm︱grinding length 650 mm︱centre height 175 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Well-maintained cylindrical grinding machine for internal and external cylindrical grinding - 7072 operating hours - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300 L, manufacturer Knoll. - Including machine accessories, e.g. holders, flanges, collet chuck set, etc. - The machine has been serviced regularly, technically and visually in good condition - ready for use!
            grinding diameter 350 mm
            grinding length 650 mm
            centre height 175 mm
            Description :
            - Well-maintained cylindrical grinding machine for internal and external
            cylindrical grinding
            - 7072 operating hours
            - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300
            L, manufacturer Knoll.
            - Including machine accessories, e.g. holders, flanges, collet chuck set, etc.
            - The machine has been serviced regularly, technically and visually in good
            condition - ready for use!


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Universal cylindrical grinding machine at LagerMaschinen
          Universal cylindrical grinding machine from LagerMaschinen

          It is complicated to either start a manufacturing business or to expand your existing manufacturing capabilities. Researching various machines can be a daunting process no matter what your level of experience. Thankfully LagerMaschinen has corralled all this information in one place to help you find the perfect used universal cylindrical grinding machine - or any other machine you might need - in one place. LagerMaschinen's online apparatus makes searching for your next used machine unbelievably simple and efficient. Additionally you can network with colleagues selling in your area while shopping for your used universal cylindrical grinding machine. Get started on LagerMaschinen today and find your used universal cylindrical grinding machine today.

          Used universal cylindrical grinding machine at LagerMaschinen

          Purchasing a machine - new or used - is a complicated process. However with LagerMaschinen's customer service and delivery/installation services the logistics are taken care of. To get started log on to LagerMaschinen search for your universal cylindrical grinding machine by brand model size type or various available features. Contact one or multiple sellers and after you've made your decision use LagerMaschinen's delivery and installation services to truly simplify this process. Have questions? The customer service at LagerMaschinen is available to help you with all your questions regarding your universal cylindrical grinding machine. No matter what your business needs LagerMaschinen can help you find the right solution for your new or expanding business plans. Don't delay find your used machine - universal cylindrical grinding machine or otherwise - on LagerMaschinen today.