'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Band Saw - Automatic - Horizontal

          Machinelist: Band Saw - Automatic - Horizontal


          Band Saw - Automatic - Horizontal

          used Saws Band Saw - Automatic - Horizontal Kasto HBA A10x12


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03812 · Band Saw - Automatic - Horizontal

          Kasto - HBA A10x12 - - 2005 - CNC

          Technical details
          cutting diameter 1020 mm︱saw band length 11.430 x 80 x 1,6 mm︱cutting width 1,6 mm︱cutting range 1020x1260 mm︱Control CNC ︱cutting speed 15-190 m/min︱power capacity 11 kW︱table load 20 t︱total power requirement 20 kW︱weight of the machine ca. 21,1 t︱dimensions of the machine ca. m︱
            cutting diameter 1020 mm
            saw band length 11.430 x 80 x 1,6 mm
            cutting width 1,6 mm
            cutting range 1020x1260 mm
            Control CNC
            cutting speed 15-190 m/min
            power capacity 11 kW
            table load 20 t
            total power requirement 20 kW
            weight of the machine ca. 21,1 t
          Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal KALTENBACH KBS 860 NA


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03739 · Band Saw - Automatic - Horizontal

          KALTENBACH - KBS 860 NA - - 2003 -

          Technical details
          cutting diameter 500 mm︱saw band length 6990x41x1,3 mm︱cutting width 860x500 mm︱cutting speed 15-90 m/min︱Feed 400 mm/min︱Rapid movement 2500 mm/min︱main drive motor 5,5 kW︱cutting length min. 8 mm︱total power requirement 8,5 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 3,3x1,2x2,42 m︱
            cutting diameter 500 mm
            saw band length 6990x41x1,3 mm
            cutting width 860x500 mm
            cutting speed 15-90 m/min
            Feed 400 mm/min
            Rapid movement 2500 mm/min
            main drive motor 5,5 kW
            cutting length min. 8 mm
            total power requirement 8,5 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 3,3x1,2x2,42 m
          Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal PEHAKA Roboter 540/610Z


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03756 · Band Saw - Automatic - Horizontal

          PEHAKA - Roboter 540/610Z - - 1993 - NC

          Technical details
          cutting diameter 540 mm︱saw band length 6700 mm︱cutting width 610 mm︱Stroke 1000 mm︱Control NC ︱band speed 20-116 m/min︱column diameter 150 mm︱total power requirement 11 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. m︱
          The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            cutting diameter 540 mm
            saw band length 6700 mm
            cutting width 610 mm
            Stroke 1000 mm
            Control NC
            band speed 20-116 m/min
            column diameter 150 mm
            total power requirement 11 kW
            weight of the machine ca. 3,6 t
            Description :
            The tech. Data are manufacturer or operator information and therefore non-
            binding. We reserve the right to prior sale; Our terms and conditions of sale
            apply exclusively.About usMore than 400 of our own machines in the
            warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than
            1000 items Accessories for your workshopYou want to sell machines, production
            lines or your company,then contact us.
          Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal MEBA 420 GA


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02805 · Band Saw - Automatic - Horizontal

          MEBA - 420 GA - - 1987 -

          Technical details
          cutting diameter 420 mm︱saw band length 0 mm︱cutting width 0 mm︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱
            cutting diameter 420 mm
            weight of the machine ca. 1 t
          Datasheet
          Request / Contact
          used Saws Band Saw - Automatic - Horizontal Kasto PBA 520/620


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02780 · Band Saw - Automatic - Horizontal

          Kasto - PBA 520/620 - - 1985 -

          Technical details
          cutting diameter 520 mm︱saw band length 6096 mm︱cutting width 1,3 mm︱cutting range 520x620 mm︱total power requirement 6,578 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,3 x 2,2 x 2,35 m︱
            cutting diameter 520 mm
            saw band length 6096 mm
            cutting width 1,3 mm
            cutting range 520x620 mm
            total power requirement 6,578 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,3 x 2,2 x 2,35 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль торговця: Markus Hirsch GmbH

          Зв'язатися з трейдером



            Маркус Хірш ГмбХ
           Hüttenstrasse 1
            46284 - Дорстен
            Німеччина
            + 49 2362 95035 12 "> + 49 2362 95035 12
            +49 2362 95035 10
            liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de

          Профіль Трейдера

          О компании


          Markus Hirsch GmbH є всесвітньо діючою компанією, яка регулярно виступає на міжнародних виставках, пропонуючи рішення для дилерів, промислових підприємств, адміністраторів неплатоспроможності, будівельних компаній та агрохолдингів.

          Наші послуги, що стосуються роботи з верстатами та металоконструкціями, включають: власну торгівлю з більш ніж 300 власними верстатами на складі, маркетинг, оренда та зберігання, доставка та упаковка, розбирання та монтаж, забезпечення людськими ресурсами та металоконструкції.

          У сільському господарстві ми пропонуємо наступні послуги: розкидання сечовини, пакування сіна та соломи в квадратних та круглих тюках, силосне намотування квадратних та круглих тюків, оранка з чотирьома рядними плугами та лугове перетягування.

          Ми пропонуємо більше послуг за запитом. Markus Hirsch GmbH переконує, коли мова йде про планування, точність і ціну.

          Маркус Хірш ГмбХ
          Niersweg 84
          47877 Вілліх-Нерсен
          Німеччина

          Тел .: + 49 (0) 2156 - 49894 0
          Факс: + 49 (0) 2156 - 49894 10
          Ел. пошта:  hirsch@hirsch-maschinen.de




          Markus Hirsch GmbH   46284 - Dorsten Hüttenstrasse 1 Deutschland
          Markus Hirsch GmbH

          Hüttenstrasse 1



          Contact Trader


            Markus Hirsch GmbH
           Hüttenstrasse 1
            46284 - Dorsten
            Deutschland
            +49 2362 95035 12
            +49 2362 95035 10
            liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
            Contact person:

           




          Machine category


          · · Abkantpresse - hydraulisch · Absaugung · Abwälzfräser · Anhänger · Anlage · Anreißplatte · Anzugsbolzen · Arbeitstisch · Aufnahme · Aufspannplatte · Aufspanntisch · Aufspannwinkel · Aufspannwürfel · Bandanlage · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Bearbeitungszentrum · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Behälterdrehvorrichtung · Bettfräsmaschine - Horizontal · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Blockbandsäge · Bodenwaage · Bohrerschleifmaschine · Bohrhämmer · Bohrstange · Bohrwerkstisch · Bohrwürfeltisch · Brennschneidemaschine · Brückenlaufkran - Einträger · Brückenlaufkran - Zweiträger · Bügelsäge · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerziehpresse - Hydraulisch · Dornrohrbiegemaschine · Dreh-,Schwenk-, und Kipptisch · Drehbarer Aufspanntisch · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Edelstahl-Druck-Behälter · Einspindel - Stangenautomat · Einspindelstangenautomat · Einständerpresse - Hydraulisch · Elektro - Hubwagen · Entstauber · Ersatzteile · Exzenterpresse - Einständer · Fahrständerfräsmaschine · Filteranlage · Flachschleifmaschine · Friktionsspindelpresse - Zweiständer · Fräs- und Drehwerkzeuge · Fräskopf senkrecht · Fräsmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Futter · Führungsbahnschleifmaschine - Doppelst. · Gabelstapler - Diesel · Gabelstapler - Elektro · Gabelstapler - Gas · Gießanlagen · Glattwalzmaschine · Großdrehbank · Grubber · Handhabungsgerät · Haspel · Hebezange - Greifer · Hohlspindeldrehmaschine · Honmaschine - handbetätigt · Hydraulikaggregat · Härteofen · Kalander · Kaltkammerdruckgußmaschine - Horizontal · Kaltkreissäge - Automatik · Kaltkreissäge - Vertikal · Kartoffelroder · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Klimaschrank · Knüppelschere · Kolbenkompressor · Kompressoren · Koordinatenbohrwerk · Kopfdrehmaschine · Kragarm- Regal · Krananlage · Krantraverse · Kreiselegge · Kreissägeblätter · Kurbelwellenschleifmaschine · Kühlmittelanlage · Kühlschmierstoffaufbereitungsanlage · Langdrehautomat · Langhobelmaschine - Doppelständer · Laserschneidmaschine · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · Lokomotive - Diesel · Lynette · Magnetspannplatte · Manipulator · Messerkopf · Messplatte · Meßmittel · Meßwerkzeug · Motor · Nockenwellenschleifmaschine · Nuten-Stossmaschine · Nutenfräser · Ofen - Elektro · Ofen - Gas · Planscheibe · Planschieber · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Plattenfeld · Portalfräsmaschine · Presse über 5.000 KN · Profilieranlage · Punktschweißmaschine · Radialbohrmaschine · Radlader · Regalsysteme · Richtpresse - Einständer · Roboter - Handling · Rohrbiegemaschine · Rollenbahn · Rundschleifmaschine · Rundtisch · Schleifmaschinen · Schmiedehammer · Schmiedemaschine · Schmiedepresse - Doppelständer · Schraubstock · Schubladenschrank · Schubladenschränke · Schwader · Schweißanlage · Schweißplatte · Schweißtisch · Schwerdrehmaschine · Schwerlastanhänger · Setzstock · Sondermaschine · Sonstige · Spannmittel · Spanntisch · Späneförderer · Stanzautomat - Einständer · Stanzautomat-Einständer · Stromaggregat · Ständerbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Teleskoplader · Temperiergerät · Tieflader · Tieflochbohrmaschine · Tischbohrwerk · Traktor · Tuschierpresse · Türenschrank · Universal-Fräs- und Bohrmaschine · Universal-Fräs- und Bohrwerk · Viersäulenpresse - Hydraulisch · Vierwalzen - Blechbiegemaschine · Walzendrehmaschine · Wandschwenkkran · Wasserstrahlschneidanlage · Wendespanner · Werkbänke · Werkzeug Voreinstellgerät · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugschränke · Winkelkopf · Wärmeofen · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradprüfmaschine · Zahnradschleifmaschine · Zentriermaschine · Zentrierspitze · Zubehör · Ölnebel-Abscheider ·