Bandsaw - Horizontal

cutting diameter 360 mm︱saw band length 5200 x 34 x 1,1 mm︱cutting width 700 mm︱cutting capacity - flat 590 x 360 /30° mm︱cutting capacity - round 360 / 30° mm︱cutting capacity - square 360 x 360 / 30° mm︱cutting capacity - flat 460 x 360 /45° mm︱cutting capacity - round 360 /45° mm︱cutting capacity - square 360 x 360 / 45° mm︱cutting capacity - flat 305 x 360 /60° mm︱cutting capacity - round 360 / 60° mm︱cutting capacity - square 305 x 360 / 60° mm︱cutting capacity - flat 700 x 360 / 90° mm︱cutting capacity - round 360 / 90° mm︱cutting capacity - square 360 x 360 / 90° mm︱speed 20 - 100 m/min︱sawing motor 3 kW︱hydraulic motor 0,55 kW︱coolant pump 0,12 kW︱voltage 400 V / 50 Hz︱

---

Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder.

cutting diameter 220 mm︱saw band length 2465 mm︱cutting width 0,9 mm︱capacity 90 degrees: flat 230 x 185 mm︱capacity 45 degrees: round 150 mm︱capacity 45 degrees: flat 210 x 150 mm︱cutting speed 35-70 m/min︱cutting angle 45 °︱total power requirement 1,1 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,4 x 0,75 x 1 m︱

---

• compl. saw bow swivellable for miter cuttings • autom. limit stop • adjustment of the saw pressure by hydr. cylinder • coolant device

cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱

---

We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.

cutting capacity - round Ø 150 mm︱ Ø 75 mm︱ 150x125 mm︱ 70x50 mm︱ 125 mm︱ 50 mm︱speeds steplessly adjustable 25-138 m/min︱total power requirement 1,8 kW︱weight of the machine ca. 35 kg︱

---

cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 335 mm︱dimensions of the machine ca. 1.500 x 2.100 x 1.800 m︱

---

Brand Meba Type Eco 335 DG Year of make 2012 Horizontal Semi-automatic Capacity around 335 mm Capacity rectangular 335 x 400 mm Absent +60 / -45 ° Variably adjustable speed Hydraulic clamping Hydraulic lowering Machine size (lxwxh) 1.500 x 2.100 x 1.800 mm

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 485 kg︱dimensions of the machine ca. 1700 x 1000 x 1800 mm︱

---

Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO

cutting diameter 230 mm︱saw band length 2730 x 27 mm︱cutting width 0,9 mm︱capacity 90 degrees: flat 320 x 130 mm︱capacity 45 degrees: round 180 mm︱capacity 45 degrees: flat 230 x 100 mm︱cutting speed 35 - 70 m/min︱cutting angle + - 45 °︱hydraulic motor 0,37 kW︱coolant pump 0,12 kW︱sawing motor 1,5 kW︱total power requirement 2 kW︱weight of the machine ca. 440 kg︱dimensions of the machine ca. 1,4 x 0,9 x 1,3 m︱

---

Setting of the saw pressure by hydr. cylinder Cooling device,

cutting diameter 800 mm︱saw band length 8500 x 54 x 1,6 mm︱cutting width 1000 mm︱cutting capacity - flat 800 x 1000 mm︱cutting capacity - round 800 mm︱cutting capacity - square 800 x 800 mm︱speed 15 - 100betrieb m/min︱operating pressure 50 bar︱operating pressure Spannbacken -40 bar︱operating pressure Bündelspanner - 6-15 bar︱sawing motor 11 kW︱hydraulic motor 1,5 kW︱voltage 400 V / 50 Hz︱total power requirement 13,4 kW︱weight of the machine ca. 3800 kg︱dimensions of the machine ca. 4100 x 1300 x 2450 mm︱

---

Accessories: Inverter Hydromechanical blade tensioner Chip remover Hydraulic vice without roller conveyor, Saw band

cutting diameter 345 mm︱dimensions of saw-band 4780 x 32(34) x 1,1 mm︱cutting width s. Abbildung mm︱coolant pump Typ 2C0P1-14H ︱coolant capacity 50 dm³︱output 2,6 ︱angle adjustable from - to -45 bis +60 Grad︱weight of the machine ca. 630 kg︱dimensions ca. 2400 x 845 x 1430 mm︱

---

cutting diameter 320 mm︱saw band length 4150x1,1 mm︱cutting width 600 mm︱total power requirement kW︱weight of the machine ca. 0,44 t︱dimensions of the machine ca. m︱

---

Fully automatic band saw roller conveyor Dimensions: 4000x700

cutting diameter 165 mm︱saw band length 2400 x 0,90 x 20 mm︱cutting width 225 mm︱band speed 35 7 70 m/min︱Capacity 90° rectangular 225 x 160 mm︱ 225 x 160 mm︱ 165 x 165 mm︱ 165 mm︱Capacity 90° rectangular 170 x 100 mm︱ 155 x 155 mm︱ 155 x 155 mm︱capacity 60 degrees: round 65 mm︱capacity 60 degrees: flat 110 y 60 mm︱capacity 60 degrees: square 60 x 60 mm︱total power requirement kW︱weight of the machine ca. 150 kg︱dimensions of the machine ca. 1100 x 450 x 1350 mm︱base ︱Coolant System ︱pneumatic clamping ︱

---

manual band saw machine for industrial work developed.

capacity 90 degrees: round 270 mm︱capacity 90 degrees: square 260 mm︱ 350 x 240 ︱band speed 36/72 m/min︱saw band length 2925 x 27 x 0,9 mm︱total power requirement 1,9 kW︱weight of the machine ca. 0,6 kg︱Dimensions (LxWxH) 1,9 x 1,1 x 1,75 0︱

---

Band saw including micro spray device

Sawing capacity round 160 mm︱Sawing capacity square 160 mm︱Sawing capacity rectangular 160 x 200 mm︱Sawing Angle 45/60 Grad︱cutting speed 33/66 m/min︱total power requirement 1,9 kW︱weight of the machine ca. 310 t︱required space 1,1 x 0,8 x 1,5 m︱

---

cutting diameter 260 mm︱saw band length 2910 mm︱cutting width 0,9 mm︱capacity 45 degrees: round 200 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 90 degrees: flat 300 x 260 mm︱capacity 60 degrees: round 165 mm︱capacity 60 degrees: square 150 x 150 mm︱capacity 60 degrees: flat 160 x 120 mm︱cutting speed 35 / 70 m/min︱dimensions of saw-band 2910 x 27 x 0,9 mm︱height of material-table 950 mm︱total power requirement 2,0 kW︱weight of the machine ca. 400 kg︱dimensions of machine L x W x H 1,70 x 0,90 x 1,67 ︱

---

Accessories: coolant

cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 240 mm︱saw band length 3.010 mm︱dimensions of the machine ca. 1.900 x 1.700 x 1.500 m︱

---

Brand Bewo Type 350 Year of make 1996 Horizontal Semi-automatic Capacity 240 mm Absent 45 ° Saw blade dimension 3010 mm Manual clamps Hydraulic clamping Hydraulic lowering Machine size (lxwxh) 1.900 x 1.700 x 1.500 mm

cutting diameter 280 mm︱saw band length 3830 x 25 x 0,9 mm︱cutting width 360 x 180 mm︱ 180 x 180 mm︱Capacity 45° rectangular 260 x 180 mm︱ 180 mm︱ 280 x 280 mm︱cutting speed 19 - 110 m/min︱coolant tank 35 l︱Capacity 16 l/min︱total power requirement 2,0 kW︱weight of the machine ca. 0,44 t︱dimensions of the machine ca. 2,8 x 0,85 x 2,35 m︱Saw Band ︱

---

cutting diameter 250 mm︱saw band length 0 mm︱cutting width mm︱workpiece dia. 150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Horizontal band saw

cutting diameter 220 mm︱saw band length 2455 mm︱table height 850 mm︱cutting width 230 mm︱cutting speed 35 + 70 m/min︱dimensions of saw-band 2455 x 27 x 0,9 mm︱ 90 mm︱ 90 mm︱ 90 x 100 mm︱ 150 ︱Impact energy 150 ︱Air consume per blow 150 x 210 ︱ 220 mm︱stroke back stop 210 mm︱cross-slide 230 x 185 ︱total power requirement 1,2 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. 1,2 x 0,6 x 1,7 m︱

---

SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 210 mm︱ 290 x 210 mm︱saw band length 2.965 x 27 x 0,9 mm mm︱table height 940 mm︱band speed 35 / 70 m/min︱total power requirement 1,1/1,3 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,5 m︱

---

SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

cutting diameter 220 mm︱saw band length 2520 x 27 x 0,9 mm︱cutting speed 25 - 90 m/min︱table height 915 mm︱cutting width 150 x 240 mm︱ 90 mm︱ 90 mm︱ 150 mm︱Impact energy 150 mm︱connected load frequency 400 Volt︱total power requirement 1,2 kW︱weight of the machine ca. 0,35 t︱dimensions 1,4 x 0,8 x 1,5 m︱

---

Rock solid band saw - Miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion - Coolant pump

cutting diameter 225 mm︱saw band length 2455 mm︱table height 850 mm︱cutting width 245 x 150 mm︱cutting speed 45/90 m/min︱dimensions of saw-band 2480 x 27 x 0,9 mm︱ 90 mm︱ 90 mm︱ 145 mm︱Impact energy 145 mm︱connected load frequency 400 Volt︱total power requirement 1,5 kW︱weight of the machine ca. 0,2 t︱dimensions 1,43 x 0,72 x 1,7 m︱

---

Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

900 mm︱ 900 mm︱ 900x900 mm︱saw band length 9300 x 67 x 1,1 mm︱table height 790 mm︱band speed 14 - 60 m/min︱total power requirement 11 kW︱weight of the machine ca. 8,45 t︱dimensions 4,485 x 1,68 x 3,15 m︱

---

The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

cutting diameter 250 mm︱saw band length 2950x27x0,9 mm︱table height mm︱band speed 36/72 m/min︱total power requirement 1,8 kW︱weight of the machine ca. 440 kg︱dimensions of the machine ca. m︱

---

Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

1000 mm︱ 1000 mm︱ 1200x1000 mm︱saw band length 11300 x 80 x 1,3 mm︱table height 790 mm︱band speed 14 - 60 m/min︱total power requirement 18 kW︱weight of the machine ca. 9,0 t︱dimensions 5,0 x 1,68 x 3,15 m︱

---

The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.