'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Presses

          Machinelist: Presses


          double-sided high speed press

          used Presses double-sided high speed press HENSEL EBU HK 130/1600 P2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193013 · double-sided high speed press

          HENSEL - EBU HK 130/1600 P2 - - 1997 - Siemens S7-1500 F (neu)

          Technical details
          pressure 130 t︱distance between columns 1600 mm︱stroke 8 - 140 mm︱no. of strokes 50 - 200 Hub/min︱dayligth (stroke and adjustment up) 520 mm︱column travel -side 610 mm︱table surface area 1600 x 880 mm︱hole in the table 1000 x 350 mm︱table height over floor 950 mm︱ram surface 1600 x 880 mm︱power requirement 24,2 kW︱weight of the machine ca. 28,00 t︱required space 4,3 x 2,2 x 3,8 m︱ram adjustment 100 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting press will be fitted with new control Siemens S 7-1500 F Video at seller's site before dismantling available
            pressure 130 t
            distance between columns 1600 mm
            stroke 8 - 140 mm
            no. of strokes 50 - 200 Hub/min
            dayligth (stroke and adjustment . 520 mm
            column travel -side 610 mm
            table surface area 1600 x 880 mm
            hole in the table 1000 x 350 mm
            table height over floor 950 mm
            ram surface 1600 x 880 mm
            power requirement 24,2 kW
            weight of the machine ca. 28,00 t
            required space 4,3 x 2,2 x 3,8 m
            ram adjustment 100 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting
            press will be fitted with new control Siemens S 7-1500 F
            Video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HENSEL EBU HK 130 ZR


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193012 · double-sided high speed press

          HENSEL - EBU HK 130 ZR - - 1996 - konventionell

          Technical details
          pressure 130 t︱distance between columns 1220/1070 mm︱stroke 22 - 96 mm︱no. of strokes 20 - 120 Hub/min︱dayligth (stroke and adjustment up) 518 mm︱column travel -side 600 mm︱table surface area 1220 x 880 mm︱hole in the table 450 x 250 mm︱table height over floor 950 mm︱ram surface 1180 x 800 mm︱power requirement 22,0 kW︱weight of the machine ca. 17,50 t︱required space 3,7 x 1,75 x 3,55 m︱ram adjustment 110 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting
            pressure 130 t
            distance between columns 1220/1070 mm
            stroke 22 - 96 mm
            no. of strokes 20 - 120 Hub/min
            dayligth (stroke and adjustment . 518 mm
            column travel -side 600 mm
            table surface area 1220 x 880 mm
            hole in the table 450 x 250 mm
            table height over floor 950 mm
            ram surface 1180 x 800 mm
            power requirement 22,0 kW
            weight of the machine ca. 17,50 t
            required space 3,7 x 1,75 x 3,55 m
            ram adjustment 110 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Presses Eccentric Press - Single Column HENSEL EBU SKE 75 FU (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193029V · Eccentric Press - Single Column

          HENSEL - EBU SKE 75 FU (UVV) - - 2000 - konventionell

          Technical details
          pressure 075 t︱throat 295 mm︱stroke 16 - 140 mm︱Stroke rate 75 / min︱Distance table/ram, max. stroke up, adjustment up 450 mm︱Table surface area 800 x 595 mm︱Hole in the table 330 x 230 mm︱Table height above floor 745 mm︱Ram surface 470 x 180 mm︱Ram adjustment 80 mm︱Power capacity 5,5 kW︱Weight 5,0 t︱Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m︱
          overhaul 2000 permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram, two-hand operation press can be inspected in running condition in our warehouse
            pressure 075 t
            throat 295 mm
            stroke 16 - 140 mm
            Stroke rate 75 / min
            Distance table/ram, max. stroke . 450 mm
            Table surface area 800 x 595 mm
            Hole in the table 330 x 230 mm
            Table height above floor 745 mm
            Ram surface 470 x 180 mm
            Ram adjustment 80 mm
            Power capacity 5,5 kW
            Weight 5,0 t
            Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m
            Description :
            overhaul 2000
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with pneumatic clutch, mechanical overload protection in ram, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU HK 250 FRC (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-203014V · Eccentric Press - Single Column

          HENSEL - EBU HK 250 FRC (UVV) - - 1990 - Siemens S7-1500 F (neu)

          Technical details
          Pressure 250 t︱stroke 16 - 160 mm︱no. of strokes 33 / 50 /min︱Throat 410 mm︱distance table/ram, max. stroke up, adjustment up 450 mm︱table surface area 1100 x 790 mm︱Hole in the table 660 x 320 mm︱table height over floor 720 mm︱Passage to the back 590 mm︱ram surface 800 x 500 mm︱ram adjustment 120 mm︱power requirement 16,0 / 23,0 kW︱weight 28,5 t︱dimensions (WxDxH) 2,1 x 3,2 x 3,4 m︱ polumschaltbar
          with modernization of the electrical control permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication
            Pressure 250 t
            stroke 16 - 160 mm
            no. of strokes 33 / 50 /min
            Throat 410 mm
            distance table/ram, max. stroke . 450 mm
            table surface area 1100 x 790 mm
            Hole in the table 660 x 320 mm
            table height over floor 720 mm
            Passage to the back 590 mm
            ram surface 800 x 500 mm
            ram adjustment 120 mm
            power requirement 16,0 / 23,0 kW
            weight 28,5 t
            dimensions (WxDxH) 2,1 x 3,2 x 3,4 m
            polumschaltbar
            Description :
            with modernization of the electrical control
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU H 80 RIV (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-153001V · Eccentric Press - Single Column

          HENSEL - EBU H 80 RIV (UVV) - - 1989 - konventionell

          Technical details
          Pressure 080 t︱throat 300 mm︱stroke 8 - 140 mm︱no. of strokes 60 / 90 /min︱distance table/ram, max. stroke up, adjustment up 420 mm︱table surface area 800 x 600 mm︱hole in the table 330 x 230 mm︱table adjustable 230 mm︱table height over floor 750 - 980 mm︱ram surface 600 x 240 mm︱ram adjustment 100 mm︱power capacity 4,5 / 6,9 kW︱Weight 5,5 t︱Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, hydraulic overload protection in ram, adjustable table, two-hand and foot operation press can be inspected in running condition in our warehouse
            Pressure 080 t
            throat 300 mm
            stroke 8 - 140 mm
            no. of strokes 60 / 90 /min
            distance table/ram, max. stroke . 420 mm
            table surface area 800 x 600 mm
            hole in the table 330 x 230 mm
            table adjustable 230 mm
            table height over floor 750 - 980 mm
            ram surface 600 x 240 mm
            ram adjustment 100 mm
            power capacity 4,5 / 6,9 kW
            Weight 5,5 t
            Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic clutch/brake combination, hydraulic overload protection in ram, adjustable table, two-hand and foot operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU H 35 F (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163018V · Eccentric Press - Single Column

          HENSEL - EBU H 35 F (UVV) - - 1985 - konventionell

          Technical details
          Pressure 035 t︱throat 225 mm︱stroke 8 - 100 mm︱no. of strokes 130 /min︱distance table/ram, max. stroke up, adjustment up 370 mm︱table surface area 580 x 450 mm︱hole in the table 210 x 170 mm︱table height over floor 700 mm︱ram surface 350 x 180 mm︱ram adjustment 70 mm︱power requirement 2,2 kW︱weight 2,2 t︱dimensions (WxDxH) 1,0 x 1,8 x 2,2 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic clutch, mechanical overload protection in ram, two-hand and foot operation can be inspected in running condition in our warehouse
            Pressure 035 t
            throat 225 mm
            stroke 8 - 100 mm
            no. of strokes 130 /min
            distance table/ram, max. stroke . 370 mm
            table surface area 580 x 450 mm
            hole in the table 210 x 170 mm
            table height over floor 700 mm
            ram surface 350 x 180 mm
            ram adjustment 70 mm
            power requirement 2,2 kW
            weight 2,2 t
            dimensions (WxDxH) 1,0 x 1,8 x 2,2 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic clutch, mechanical overload protection in ram, two-hand and foot operation
            can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU 50


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113045 · Eccentric Press - Single Column

          HENSEL - EBU 50 - - 1978 - konventionell

          Technical details
          pressure 050 t︱throat 250 mm︱stroke 8 - 120 mm︱no. of strokes 100 /min︱distance table/ram, max. stroke up, adjustment up 400 mm︱table surface area 650 x 515 mm︱hole in the table 115 mm︱table height over floor 790 - 1020 mm︱table adjustable 230 mm︱ram surface 390 x 180 mm︱ram adjustment 70 mm︱power requirement 2,0 kW︱weight 2,6 t︱dimensions (WxDxH) 1,1 x 1,4 x 2,2 m︱
          Nur zugelassen für sicheres Werkzeug oder feste Abschirmung gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit mechanischer Überlastsicherung im Stößel, Fußbedienung
            pressure 050 t
            throat 250 mm
            stroke 8 - 120 mm
            no. of strokes 100 /min
            distance table/ram, max. stroke . 400 mm
            table surface area 650 x 515 mm
            hole in the table 115 mm
            table height over floor 790 - 1020 mm
            table adjustable 230 mm
            ram surface 390 x 180 mm
            ram adjustment 70 mm
            power requirement 2,0 kW
            weight 2,6 t
            dimensions (WxDxH) 1,1 x 1,4 x 2,2 m
            Description :
            Nur zugelassen für sicheres Werkzeug oder feste Abschirmung gemäß den deutschen Unfallverhütungsvorschriften (UVV)
            mit mechanischer Überlastsicherung im Stößel, Fußbedienung


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU 50


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123161 · Eccentric Press - Single Column

          HENSEL - EBU 50 - - 1969 - konventionell

          Technical details
          pressure 050 t︱throat 260 mm︱stroke 8 - 120 mm︱no. of strokes 100 /min︱distance table/ram, max. stroke up, adjustment up 410 mm︱table surface area 650 x 500 mm︱hole in the table 250 x 180 mm︱table height over floor 740 - 980 mm︱table adjustable 240 mm︱ram surface 400 x 180 mm︱ram adjustment 70 mm︱power requirement 2,2 kW︱weight 2,3 t︱dimensions (WxDxH) 1,2 x 1,4 x 2,3 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with rolling key clutch, mechanical overload protection in ram, adjustable table
            pressure 050 t
            throat 260 mm
            stroke 8 - 120 mm
            no. of strokes 100 /min
            distance table/ram, max. stroke . 410 mm
            table surface area 650 x 500 mm
            hole in the table 250 x 180 mm
            table height over floor 740 - 980 mm
            table adjustable 240 mm
            ram surface 400 x 180 mm
            ram adjustment 70 mm
            power requirement 2,2 kW
            weight 2,3 t
            dimensions (WxDxH) 1,2 x 1,4 x 2,3 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with rolling key clutch, mechanical overload protection in ram, adjustable table


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU 50 SK


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113047 · Eccentric Press - Single Column

          HENSEL - EBU 50 SK - - 1968 - konventionell

          Technical details
          pressure 050 t︱throat 250 mm︱stroke 8 - 120 mm︱no. of strokes 115 /min︱distance table/ram, max. stroke up, adjustment up 420 mm︱table surface area 645 x 510 mm︱hole in the table 250 x 180 mm︱table height over floor 700 - 930 mm︱table adjustable 230 mm︱ram surface 220 x 185 mm︱ram adjustment 70 mm︱power requirement 3,0 kW︱weight 3,0 t︱dimensions (WxDxH) 1,1 x 1,8 x 2,4 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with mechanical overload protection in ram, adjustable table, foot operation
            pressure 050 t
            throat 250 mm
            stroke 8 - 120 mm
            no. of strokes 115 /min
            distance table/ram, max. stroke . 420 mm
            table surface area 645 x 510 mm
            hole in the table 250 x 180 mm
            table height over floor 700 - 930 mm
            table adjustable 230 mm
            ram surface 220 x 185 mm
            ram adjustment 70 mm
            power requirement 3,0 kW
            weight 3,0 t
            dimensions (WxDxH) 1,1 x 1,8 x 2,4 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with mechanical overload protection in ram, adjustable table, foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU 35


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083171 · Eccentric Press - Single Column

          HENSEL - EBU 35 - - 1966 - konventionell

          Technical details
          pressure 035 t︱throat 225 mm︱stroke 8 - 100 mm︱no. of strokes 110 /min︱distance table/ram, max. stroke up, adjustment up 400 mm︱table surface area 580 x 460 mm︱hole in the table 250 x 150 mm︱table height over floor 700 mm︱table adjustable 230 mm︱ram surface 355 x 120 mm︱ram adjustment 70 mm︱power requirement 2,2 kW︱weight 1,5 t︱dimensions (WxDxH) 1,0 x 1,5 x 2,05 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with rolling key clutch, mechanical overload protection in ram, adjustable table can only be offered without putting into operation, in given condition
            pressure 035 t
            throat 225 mm
            stroke 8 - 100 mm
            no. of strokes 110 /min
            distance table/ram, max. stroke . 400 mm
            table surface area 580 x 460 mm
            hole in the table 250 x 150 mm
            table height over floor 700 mm
            table adjustable 230 mm
            ram surface 355 x 120 mm
            ram adjustment 70 mm
            power requirement 2,2 kW
            weight 1,5 t
            dimensions (WxDxH) 1,0 x 1,5 x 2,05 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with rolling key clutch, mechanical overload protection in ram, adjustable table
            can only be offered without putting into operation, in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HENSEL EBU SK 50


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113013 · Eccentric Press - Single Column

          HENSEL - EBU SK 50 - - 1951 / 77 - konventionell

          Technical details
          pressure 050 t︱throat 255 mm︱stroke 8 - 120 mm︱no. of strokes 115 /min︱distance table/ram, max. stroke up, adjustment up 380 mm︱table surface area 640 x 500 mm︱hole in the table 250 x 180 mm︱table height over floor 710 - 930 mm︱table adjustable 220 mm︱ram surface 550 x 170 mm︱ram adjustment 70 mm︱power requirement 4,0 kW︱weight 3,1 t︱dimensions (WxDxH) 1,5 x 1,5 x 2,3 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with foot operation
            pressure 050 t
            throat 255 mm
            stroke 8 - 120 mm
            no. of strokes 115 /min
            distance table/ram, max. stroke . 380 mm
            table surface area 640 x 500 mm
            hole in the table 250 x 180 mm
            table height over floor 710 - 930 mm
            table adjustable 220 mm
            ram surface 550 x 170 mm
            ram adjustment 70 mm
            power requirement 4,0 kW
            weight 3,1 t
            dimensions (WxDxH) 1,5 x 1,5 x 2,3 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the perfect presses for your needs at LagerMaschinen
          Presses are multi-function tools for home or business

          The umbrella term press encompasses a wide range of different machines with an enormous array of functions. Presses can be used for the shaping, cutting, and punching of a variety of different materials. Whether youre in the market for a small manually-operated press for your home workshop or a massive industrial press for your business, you can easily find the most suitable machine for your specifications quickly and easily using LagerMaschinens online marketplace of used machines.

          Find the right used machines for you at LagerMaschinen

          From the publishing industry to the automotive sector, presses play a crucial role in the forming and finishing of products. Presses can be used to shape heavy material, imprint papers and plastic or cut and form metal, such as in coin production. For control and precision, look for used manually-operated presses. For mass-production, CNC operated presses offer quality and efficiency. No matter what your needs are, you can find used presses and more at LagerMaschinen.

          Investing in used machines is a business-savvy plan

          Buying used machines is a practical solution to the budgetary woes of buying equipment for your home or business. When you invest in used machines you get the quality you demand as a price you can afford. The machine marketplace offered by LagerMaschinen is a user-friendly forum for buying and selling used machines. Presses, lathes, grinders and more can be searched for and filtered by location, price or brand, ensuring a hassle-free shopping process from the comfort of your home or office.