'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Single Column Drawing Press - Hydraulic

          Machinelist: Single Column Drawing Press - Hydraulic


          Drawing Press - 1-Col.Hydr.

          used Presses Drawing Press - 1-Col.Hydr. PME PHY 250 C


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233023V · Drawing Press - 1-Col.Hydr.

          PME - PHY 250 C - - 2007 - Siemens S 7

          Technical details
          pressure 250 t︱stroke 600 mm︱throat 360 mm︱dayligth 800 mm︱table surface area 1400 x 700 mm︱table height over floor 1030 mm︱ram surface 1100 X 600 mm︱feed down 300 mm/s︱feed up 480 mm/s︱working feed 69 mm/s︱oil volume l︱power requirement 55,0 kW︱Weight 11,0 t︱dimensions of the machine ca. 2,2 x 3,2 x 3,4 m︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation
            pressure 250 t
            stroke 600 mm
            throat 360 mm
            dayligth 800 mm
            table surface area 1400 x 700 mm
            table height over floor 1030 mm
            ram surface 1100 X 600 mm
            feed down 300 mm/s
            feed up 480 mm/s
            working feed 69 mm/s
            power requirement 55,0 kW
            Weight 11,0 t
            dimensions of the machine ca. 2,2 x 3,2 x 3,4 m
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. MUELLER CEZ 63.5.10 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133027 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 63.5.10 (UVV) - - 1991 - konventionell

          Technical details
          pressure 63 t︱throat 325 mm︱stroke 560 mm︱dayligth 700 mm︱table surface area 640 x 640 mm︱die cushion capacity 25 t︱die cushion stroke 200 mm︱die cushion area 450 x 450 mm︱table height over floor 800 mm︱ram surface 560 x 560 mm︱oil volume 450 l︱total power requirement 15,0 kW︱weight of the machine ca. 7,0 t︱required space 1,2 x 2,0 x 3,1 m︱
          year of manufacture 1971 overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse
            pressure 63 t
            throat 325 mm
            stroke 560 mm
            dayligth 700 mm
            table surface area 640 x 640 mm
            die cushion capacity 25 t
            die cushion stroke 200 mm
            die cushion area 450 x 450 mm
            table height over floor 800 mm
            ram surface 560 x 560 mm
            oil volume 450 l
            total power requirement 15,0 kW
            weight of the machine ca. 7,0 t
            required space 1,2 x 2,0 x 3,1 m
            Description :
            year of manufacture 1971
            overhaul 1991
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. LAUFFER EZU 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103057 · Drawing Press - 1-Col.Hydr.

          LAUFFER - EZU 100 (UVV) - - 1989 - konventionell

          Technical details
          pressure 100 t︱stroke 560 mm︱throat 540 mm︱dayligth 800 mm︱table surface area 1000 x 1000 mm︱die cushion capacity 50 t︱die cushion stroke 200 mm︱die cushion area 710 x 650 mm︱table height over floor 910 mm︱ram surface 1000 x 1000 mm︱feed down 400 mm/s︱feed up 300 mm/s︱working feed 57,7 mm/s︱oil volume 650 l︱power requirement 37,5 kW︱Weight 15,0 t︱dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 100 t
            stroke 560 mm
            throat 540 mm
            dayligth 800 mm
            table surface area 1000 x 1000 mm
            die cushion capacity 50 t
            die cushion stroke 200 mm
            die cushion area 710 x 650 mm
            table height over floor 910 mm
            ram surface 1000 x 1000 mm
            feed down 400 mm/s
            feed up 300 mm/s
            working feed 57,7 mm/s
            oil volume 650 l
            power requirement 37,5 kW
            Weight 15,0 t
            dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. DUNKES HZS 250


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0024 · Drawing Press - 1-Col.Hydr.

          DUNKES - HZS 250 - - 1989 -

          Technical details
          Press capacity 250 t︱Throat depth 430 mm︱Stroke 300 mm︱Daylight 500 mm︱Table surface area 1.100 x 850 mm︱Approach speed 330 mm / s︱Working speed 11 - 30 mm / s︱Return speed 330 mm / s︱Die cushion capacity in table 80 t︱Die cushion stroke 100 mm︱Ejector in ram 5 t︱Ejector stroke in ram 75 mm︱Oil volume 1.400 l︱Dimensions L x W x H 3.200 x 2.500 x 4.250 mm︱Weight of machine approx. 32 t︱
            Press capacity 250 t
            Throat depth 430 mm
            Stroke 300 mm
            Daylight 500 mm
            Table surface area 1.100 x 850 mm
            Approach speed 330 mm / s
            Working speed 11 - 30 mm / s
            Return speed 330 mm / s
            Die cushion capacity in table 80 t
            Die cushion stroke 100 mm
            Ejector in ram 5 t
            Ejector stroke in ram 75 mm
            Oil volume 1.400 l
            Dimensions L x W x H 3.200 x 2.500 x 4.250 mm
            Weight of machine approx. 32 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. SMG CSZ 63


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113030 · Drawing Press - 1-Col.Hydr.

          SMG - CSZ 63 - - 1979 - konventionell

          Technical details
          pressure 63 t︱stroke 200 mm︱throat 320 mm︱dayligth 450 mm︱table surface area 750 x 600 mm︱die cushion capacity 6,5 t︱die cushion stroke 80 mm︱die cushion area 240 mm︱table height over floor 800 mm︱ram surface 500 x 450 mm︱feed down 300 mm/s︱feed up 300 mm/s︱working feed 50 mm/s︱oil volume 380 l︱power requirement 12,0 kW︱Weight 6,5 t︱dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm︱
          with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop
            pressure 63 t
            stroke 200 mm
            throat 320 mm
            dayligth 450 mm
            table surface area 750 x 600 mm
            die cushion capacity 6,5 t
            die cushion stroke 80 mm
            die cushion area 240 mm
            table height over floor 800 mm
            ram surface 500 x 450 mm
            feed down 300 mm/s
            feed up 300 mm/s
            working feed 50 mm/s
            oil volume 380 l
            power requirement 12,0 kW
            Weight 6,5 t
            dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm
            Description :
            with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. SMG CS 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183027 · Drawing Press - 1-Col.Hydr.

          SMG - CS 100 (UVV) - - 1978 - konventionell

          Technical details
          pressure 100 t︱stroke 150 mm︱throat 345 mm︱dayligth 400 mm︱table surface area 1200 x 600 mm︱table height over floor 850 mm︱ram surface 560 x 500 mm︱feed down 350 mm/s︱feed up 350 mm/s︱working feed 25 mm/s︱oil volume 560 l︱power requirement 22,0 kW︱Weight 8,3 t︱dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, mechanical depth stop
            pressure 100 t
            stroke 150 mm
            throat 345 mm
            dayligth 400 mm
            table surface area 1200 x 600 mm
            table height over floor 850 mm
            ram surface 560 x 500 mm
            feed down 350 mm/s
            feed up 350 mm/s
            working feed 25 mm/s
            oil volume 560 l
            power requirement 22,0 kW
            Weight 8,3 t
            dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, mechanical depth stop


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. MUELLER CEZ 200.2.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063212 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 200.2.1 - - 1977 - konventionell

          Technical details
          pressure 200 t︱stroke 560 mm︱throat 360 mm︱dayligth 780 mm︱table surface area 740 x 720 mm︱die cushion capacity 80 t︱die cushion stroke 200 mm︱die cushion area 530 x 530 mm︱table height over floor 920 mm︱ram surface 560 x 560 mm︱oil volume l︱power requirement 35,0 kW︱Weight 10,0 t︱dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table
            pressure 200 t
            stroke 560 mm
            throat 360 mm
            dayligth 780 mm
            table surface area 740 x 720 mm
            die cushion capacity 80 t
            die cushion stroke 200 mm
            die cushion area 530 x 530 mm
            table height over floor 920 mm
            ram surface 560 x 560 mm
            power requirement 35,0 kW
            Weight 10,0 t
            dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Single Column Drawing Press - Hydraulic

          used Presses Single Column Drawing Press - Hydraulic ZEULENRODA PYE 160 SSM


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15436 · Single Column Drawing Press - Hydraulic

          ZEULENRODA - PYE 160 SSM - - unbekannt -

          Technical details
          pressure 160 t︱throat 360 mm︱stroke 500 mm︱table surface area 1250x630 mm︱ram surface 1000x450 mm︱table height 1000 mm︱dayligth 800 mm︱weight of the machine ca. 8 t︱
            pressure 160 t
            throat 360 mm
            stroke 500 mm
            table surface area 1250x630 mm
            ram surface 1000x450 mm
            table height 1000 mm
            dayligth 800 mm
            weight of the machine ca. 8 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Drawing Press - Hydraulic RÖCHER REP 160.01 SZ


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-0720866 · Single Column Drawing Press - Hydraulic

          RÖCHER - REP 160.01 SZ - - 1980 -

          Technical details
          pressure 160 t︱throat 360 mm︱stroke 250 mm︱total power requirement 37 kW︱weight of the machine ca. 15000 kg︱dimensions of the machine ca. 2300 x 1200 x 3350 mm︱
            pressure 160 t
            throat 360 mm
            stroke 250 mm
            total power requirement 37 kW
            weight of the machine ca. 15000 kg
            dimensions of the machine ca. 2300 x 1200 x 3350 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Drawing Press - Hydraulic MÜLLER CEZ 160.5.8


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-600360 · Single Column Drawing Press - Hydraulic

          MÜLLER - CEZ 160.5.8 - - 1977 -

          Technical details
          pressure 160 t︱throat 360 mm︱stroke 560 mm︱total power requirement 33 kW︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. 2000x2400x3650 mm︱
            pressure 160 t
            throat 360 mm
            stroke 560 mm
            total power requirement 33 kW
            weight of the machine ca. 6000 kg
            dimensions of the machine ca. 2000x2400x3650 mm


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic HANNIFIN F20-21N


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-41230 · Single Column Press - Hydraulic

          HANNIFIN - F20-21N - - unbek. -

          Technical details
          pressure 2 t︱throat 150 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up mm︱table surface area 310 x 250 mm︱hole in the table mm︱table height over floor mm︱power requirement 2,0 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,2 x 0,8 x 1,7 m︱
          Single column press - with table base - various press accessories
            pressure 2 t
            throat 150 mm
            stroke 150 mm
            table surface area 310 x 250 mm
            power requirement 2,0 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 1,2 x 0,8 x 1,7 m
            Description :
            Single column press
            - with table base
            - various press accessories


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic PROFI PRESS PPCM - 50


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0358 · Single Column Press - Hydraulic

          PROFI PRESS - PPCM - 50 - - 2022 -

          Technical details
          Press capacity 50 t︱Throat depth 265 mm︱Stroke 250 mm︱Daylight 400 mm︱Table surface area 700 x 450 mm︱Approach speed 32 mm / s︱Working speed 6,3 mm / s︱Return speed 42 mm / s︱Dimensions L x W x H 1290 x 1160 x 2085 mm︱Weight of machine approx. 1,75 t︱
            Press capacity 50 t
            Throat depth 265 mm
            Stroke 250 mm
            Daylight 400 mm
            Table surface area 700 x 450 mm
            Approach speed 32 mm / s
            Working speed 6,3 mm / s
            Return speed 42 mm / s
            Dimensions L x W x H 1290 x 1160 x 2085 mm
            Weight of machine approx. 1,75 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic RHTC PPC 28


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7346 · Single Column Press - Hydraulic

          RHTC - PPC 28 - - 2021 (NEU) -

          Technical details
          pressure 28 t︱throat 225 mm︱stroke 150 mm︱table surface area 325 x 300 mm︱work speed 2 - 9,8 mm/sek︱return speed 12,8 mm/sek︱total power requirement 4 kW︱weight of the machine ca. 650 kg︱dimensions of the machine ca. 1800 x 900 x 2000 mm︱
          - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools
            pressure 28 t
            throat 225 mm
            stroke 150 mm
            table surface area 325 x 300 mm
            work speed 2 - 9,8 mm/sek
            return speed 12,8 mm/sek
            total power requirement 4 kW
            weight of the machine ca. 650 kg
            dimensions of the machine ca. 1800 x 900 x 2000 mm
            Description :
            - NC control to adjust the piston stroke
            - Selector switch for manual or semi-automatic operation
            - Flow control valve and pressure control valve
            - Integrated pressure gauge
            - Various tools can be installed on the piston - inside
            There is a 40 mm hole for attaching the tools


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF CHS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103044 · Single Column Press - Hydraulic

          NEFF - CHS 160 (UVV) - - 2020 - Siemens S7-1500F

          Technical details
          pressure 160 t︱throat 350 mm︱stroke 140 mm︱dayligth 370 mm︱table surface area 750 x 620 mm︱hole in the table 220 mm︱table height over floor 850 mm︱ram surface 750 x 580 mm︱oil volume 700 l︱feed down 300 mm/sec︱feed up 480 mm/sec︱feed under pressure 58 mm/sec︱total power requirement 60 kW︱weight of the machine ca. 10,8 t︱required space 2,4 x 1,8 x 3,5 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995
            pressure 160 t
            throat 350 mm
            stroke 140 mm
            dayligth 370 mm
            table surface area 750 x 620 mm
            hole in the table 220 mm
            table height over floor 850 mm
            ram surface 750 x 580 mm
            oil volume 700 l
            feed down 300 mm/sec
            feed up 480 mm/sec
            feed under pressure 58 mm/sec
            total power requirement 60 kW
            weight of the machine ca. 10,8 t
            required space 2,4 x 1,8 x 3,5 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable two-hand operation
            2020: new electrical (safety) control - Siemens S7-1500 F,
            easy operation via touch-panel
            Design of the electrical control according to DIN EN ISO 16092-1/-2/-3
            year of manufacture 1995


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic OMERA OPI-25C


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12318 · Single Column Press - Hydraulic

          OMERA - OPI-25C - - 2001 -

          Technical details
          pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front
          Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²
            pressure 25 t
            throat 300 mm
            stroke 400 mm
            Number of working hours 1235 h
            table-size 650 x 500 mm
            ram surface 550 x 450 mm
            dayligth 700 mm
            rapid traverse - down 500 mm/sec
            work speed 27 - 72 mm/sec
            rapid traverse - up 410 mm/sec
            quantity of oil 230 l
            die cushion capacity 125 kN
            die cushion stroke 200 mm
            capacity of ejector 8 kN
            ejector stroke 150 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 1,3 x 1,6 x 2,8 m
            Description :
            Little used (only 1235 hours!) hydraulic single column press, power 25 t with
            Pilz safety control, ejector, light barrier and 2-manual operation.
            Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017.
            There is a small one in the piston rod of the cylinder Ejector cylinder
            integrated, which is controlled single-acting. The return stroke of the
            ejector takes place without force due to thesubsequent stroke of the
            Press cylinder. Machine intended for optionally retrofittable die cushion.
            Machine free due to production change. It comes from a large company and has
            been constantly maintained and kept up to date.
            Machine dealer with own stock of 1600 m²



        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic EXNER EEX 25


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233012 · Single Column Press - Hydraulic

          EXNER - EEX 25 - - 2000 - Siemens S 5

          Technical details
          pressure 25 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume 300 l︱power requirement 5,5 kW︱Weight 5,8 t︱dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 25 t
            stroke 150 mm
            throat 420 mm
            dayligth 450 mm
            table surface area 700 x 820 mm
            table height over floor 850 mm
            ram surface 600 x 600 mm
            feed down 370 mm/s
            feed up 370 mm/s
            working feed 18 - 33 mm/s
            oil volume 300 l
            power requirement 5,5 kW
            Weight 5,8 t
            dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZT 10


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024018 · Single Column Press - Hydraulic

          DUNKES - HZT 10 - - 2000 -

          Technical details
          Pressing force 10 t︱oil pressure max. in the work cylinder 310 bar︱engine output 3 kW︱tracking travel 70 ms 8 mm︱weight 1650 kg︱
            Pressing force 10 t
            oil pressure max. in the work cy. 310 bar
            engine output 3 kW
            tracking travel 70 ms 8 mm
            weight 1650 kg


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic TOX-Pressotechnik PC 30.96


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-994 · Single Column Press - Hydraulic

          TOX-Pressotechnik - PC 30.96 - - 1998 CE -

          Technical details
          pressure 30 t︱throat max. 250 mm︱stroke max. 200 mm︱dayligth 475 mm︱table surface area 550 x 500 mm︱weight of the machine ca. 2050 kg︱power stroke 20 mm︱
            pressure 30 t
            throat max. 250 mm
            stroke max. 200 mm
            dayligth 475 mm
            table surface area 550 x 500 mm
            weight of the machine ca. 2050 kg
            power stroke 20 mm


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173063 · Single Column Press - Hydraulic

          DUNKES - HZ 40 (CE) - - 1997 - konventionell

          Technical details
          pressure 40 t︱throat 300 mm︱stroke 630 mm︱dayligth 900 mm︱table surface area 620 x 520 mm︱hole in the table 150 mm︱table height over floor 600 mm︱ram surface 150 mm︱total power requirement 15,0 kW︱weight of the machine ca. 4,5 t︱required space 1,0 x 1,9 x 3,0 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 300 mm
            stroke 630 mm
            dayligth 900 mm
            table surface area 620 x 520 mm
            hole in the table 150 mm
            table height over floor 600 mm
            ram surface 150 mm
            total power requirement 15,0 kW
            weight of the machine ca. 4,5 t
            required space 1,0 x 1,9 x 3,0 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF EP-S 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173057 · Single Column Press - Hydraulic

          NEFF - EP-S 40 (CE) - - 1996 - Siemens S 5

          Technical details
          pressure 40 t︱throat 330 mm︱stroke 250 mm︱dayligth 450 mm︱table surface area 800 x 500 mm︱hole in the table 100 mm︱table height over floor 900 mm︱ram surface 100 mm︱feed down 406 mm/sec︱feed up 393 mm/sec︱feed under pressure 14 mm/sec︱oil volume 350 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,6 t︱required space 1,3 x 2,3 x 3,4 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 330 mm
            stroke 250 mm
            dayligth 450 mm
            table surface area 800 x 500 mm
            hole in the table 100 mm
            table height over floor 900 mm
            ram surface 100 mm
            feed down 406 mm/sec
            feed up 393 mm/sec
            feed under pressure 14 mm/sec
            oil volume 350 l
            total power requirement 7,5 kW
            weight of the machine ca. 4,6 t
            required space 1,3 x 2,3 x 3,4 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic HYDRAP HPSK 100 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183039 · Single Column Press - Hydraulic

          HYDRAP - HPSK 100 (CE) - - 1996 - Option: Siemens S7-1500 F (neu

          Technical details
          pressure 100 t︱throat 510 mm︱stroke 600 mm︱dayligth 1000 mm︱table surface area 1025 x 650 mm︱table height over floor 970 mm︱ram surface 1025 x 650 mm︱feed down 350 mm/sec︱feed up 330 mm/sec︱working feed 30 - 43 mm/sec︱oil volume 540 l︱total power requirement 48,0 kW︱weight of the machine ca. 12,0 t︱required space 1,2 x 2,7 x 3,9 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive Video of the finished 'sister machine' - with new electrical control - available
            pressure 100 t
            throat 510 mm
            stroke 600 mm
            dayligth 1000 mm
            table surface area 1025 x 650 mm
            table height over floor 970 mm
            ram surface 1025 x 650 mm
            feed down 350 mm/sec
            feed up 330 mm/sec
            working feed 30 - 43 mm/sec
            oil volume 540 l
            total power requirement 48,0 kW
            weight of the machine ca. 12,0 t
            required space 1,2 x 2,7 x 3,9 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive
            Video of the finished 'sister machine' - with new electrical control - available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HD 10


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-62047 · Single Column Press - Hydraulic

          DUNKES - HD 10 - - 1993 -

          Technical details
          pressure 10 t︱throat 0 mm︱stroke 400 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6500 t︱dimensions of the machine ca. m︱
          D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 6,500 kg Accessories / Special Features * DUNKES CNC Control, Model 200, can be programmed with presettable parameters, e.g. Stroke, speed, forward and return motion, pressing time, etc. * Separate switch cabinet with floppy disk input. * Pendant control with monitor. * Two-handed release, in conjunction with pneumatic safety door. * A turning device for calibrating and smoothing of bores is mounted on the ram. (Calibrating mandrel moves into the bore and rotates, powered by it own motor-driven timer. Repetitions are controlled by stroke counter.)
            pressure 10 t
            stroke 400 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6500 t
            Description :
            D U N K E S (Germany)
            CNC Controlled Hydraulic Double Column Press
            Model HD 10
            Year 1993
            ________________________________________________________

            Pressure 10 tons
            Ram stroke 400 mm
            Mounting height 600 mm

            Table size 400 x 300 mm
            Table height above floor 820 mm
            Ram area 400 x 300 mm
            Ram bore 40 mm

            Quickspeed, downwards, max. 70 mm/s
            Working speed, downwards, using max. pressure 40 mm/s
            Working speed, min. 5 mm/s
            Working speed adjustable from 5 - 70 mm/s
            Return stroke speed, min./max. 20 / 175 mm/s

            Drive 7.5 kW
            Total electrical load, approx. 12 kW - 380 V - 50 Hz
            Weight, approx. 6,500 kg

            Accessories / Special Features
            * DUNKES CNC Control, Model 200, can be programmed with
            presettable parameters, e.g. Stroke, speed, forward and
            return motion, pressing time, etc.
            * Separate switch cabinet with floppy disk input.
            * Pendant control with monitor.
            * Two-handed release, in conjunction with pneumatic safety door.
            * A turning device for calibrating and smoothing of bores is
            mounted on the ram. (Calibrating mandrel moves into the bore
            and rotates, powered by it own motor-driven timer. Repetitions
            are controlled by stroke counter.)


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 63.11.32 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143024 · Single Column Press - Hydraulic

          MUELLER - CD 63.11.32 (UVV) - - 1993 - Siemens S 7

          Technical details
          pressure 63 t︱stroke 160 mm︱throat 280 mm︱dayligth 360 mm︱table surface area 560 x 490 mm︱table height over floor 860 mm︱ram surface 280 x 280 mm︱oil volume l︱power requirement 22,0 kW︱Weight 3,6 t︱dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm︱hole in the table 125 mm︱
          year of manufacture1980 Modernization of control 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            pressure 63 t
            stroke 160 mm
            throat 280 mm
            dayligth 360 mm
            table surface area 560 x 490 mm
            table height over floor 860 mm
            ram surface 280 x 280 mm
            power requirement 22,0 kW
            Weight 3,6 t
            dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm
            hole in the table 125 mm
            Description :
            year of manufacture1980
            Modernization of control 1993
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 6,3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233004 · Single Column Press - Hydraulic

          DUNKES - HZ 6,3 - - 1993 - konventionell

          Technical details
          pressure 2 x 6,3 t︱stroke 307 mm︱throat 180 mm︱dayligth 900 mm︱table surface area 470 x 360 mm︱die cushion capacity t︱die cushion stroke mm︱die cushion area mm︱table height over floor 810 mm︱ram surface 45 mm︱feed down 137 mm/s︱feed up 33 mm/s︱working feed 540 mm/s︱oil volume 140 l︱power requirement 3,0 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t
            pressure 2 x 6,3 t
            stroke 307 mm
            throat 180 mm
            dayligth 900 mm
            table surface area 470 x 360 mm
            table height over floor 810 mm
            ram surface 45 mm
            feed down 137 mm/s
            feed up 33 mm/s
            working feed 540 mm/s
            oil volume 140 l
            power requirement 3,0 kW
            Weight 1,5 t
            dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

            Press has 2 Press shafts - press force 2 x 6,3 t


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          MÜLLER - GALDABINI - ZEULENRODA - RÖCHER -