'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Double-Column Presse

          used Presses Double-Column Presse LANGZAUNER LZT - OK - 600 - SO


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0452 · Double-Column Presse

          LANGZAUNER - LZT - OK - 600 - SO - - 2019 -

          Technical details
          Pressure total 700 t︱Stroke 600 mm︱Daylight 1000 mm︱Table surface area 3000 x 1200 mm︱Approach speed 150 mm / s︱Working speed 1 - 10 mm / s︱Return speed 150 mm / s︱Weight of machine approx. 62 t︱
            Pressure total 700 t
            Stroke 600 mm
            Daylight 1000 mm
            Table surface area 3000 x 1200 mm
            Approach speed 150 mm / s
            Working speed 1 - 10 mm / s
            Return speed 150 mm / s
            Weight of machine approx. 62 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse GRÄBENER GHF 12.000


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0363 · Double-Column Presse

          GRÄBENER - GHF 12.000 - - 2016 -

          Technical details
          Capacity 1200 t︱Daylight 2325 mm︱Stroke 1300 mm︱Table surface area 2250 x 3000 mm︱Height over floor approx. 8525 ︱Approach speed 450 mm / s︱Working speed 60 mm / s︱Return speed 350 mm / s︱Weight of machine approx. 200 t︱No. of moving bolster 1 Stk.︱
            Capacity 1200 t
            Daylight 2325 mm
            Stroke 1300 mm
            Table surface area 2250 x 3000 mm
            Height over floor approx. 8525
            Approach speed 450 mm / s
            Working speed 60 mm / s
            Return speed 350 mm / s
            Weight of machine approx. 200 t
            No. of moving bolster 1 Stk.


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse CAVENAGHI & RIDOLFI 620 t (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163012V · Double-Column Presse

          CAVENAGHI & RIDOLFI - 620 t (CE) - - 2011 - Siemens S 5

          Technical details
          pressure 620 t︱distance between columns 2250 mm︱stroke 1250 mm︱Distance table/ram, max. stroke up, adjustment up 1600 mm︱table surface area 2200 x 1280 mm︱ram surface 2200 x 1500 mm︱table height over floor 800 / 1000 mm︱column travel -side 750 mm︱feed down 10 - 250 mm/sec︱feed up 10 - 500 mm/sec︱working feed 1 - 24 mm/sec︱oil volume 2000 l︱power capacity 45,0 + kW︱weight 42,0 t︱Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m︱
          year of manufacture 1997 - overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand operation no foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - video at seller's site before dismantling available
            pressure 620 t
            distance between columns 2250 mm
            stroke 1250 mm
            Distance table/ram, max. stroke . 1600 mm
            table surface area 2200 x 1280 mm
            ram surface 2200 x 1500 mm
            table height over floor 800 / 1000 mm
            column travel -side 750 mm
            feed down 10 - 250 mm/sec
            feed up 10 - 500 mm/sec
            working feed 1 - 24 mm/sec
            oil volume 2000 l
            power capacity 45,0 + kW
            weight 42,0 t
            Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m
            Description :
            year of manufacture 1997 - overhaul 2011
            permitted for manual put-in according to the CE Regulations
            with oil-hydraulic drive, two-hand operation
            no foundation pit necessary
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse MEYER-SCHNEGG AM 4-120/420 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163022V · Double-Column Presse

          MEYER-SCHNEGG - AM 4-120/420 (CE) - - 2011 - Siemens S 7

          Technical details
          pressure 120 t︱distance between columns 430 mm︱stroke 125 mm︱distance table/ram, stroke up 400 mm︱table surface area 430 x 450 mm︱table height over floor 860 mm︱side window 230 mm︱ram surface 250 mm︱working speed 10 mm/s︱oil volume l︱power requirement 11,0 kW︱weight 2,5 t︱dimensions (WxDxH) 1,6 x 1,3 x 2,4 m︱
          year of manufacture 1974 overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand and foot operation No foundation pit necessary can be inspected in running condition in our warehouse
            pressure 120 t
            distance between columns 430 mm
            stroke 125 mm
            distance table/ram, stroke up 400 mm
            table surface area 430 x 450 mm
            table height over floor 860 mm
            side window 230 mm
            ram surface 250 mm
            working speed 10 mm/s
            power requirement 11,0 kW
            weight 2,5 t
            dimensions (WxDxH) 1,6 x 1,3 x 2,4 m
            Description :
            year of manufacture 1974
            overhaul 2011
            permitted for manual put-in according to the CE Regulations
            with oil-hydraulic drive, two-hand and foot operation
            No foundation pit necessary
            can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse SCHOEN NH/LF 200 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113046 · Double-Column Presse

          SCHOEN - NH/LF 200 (UVV) - - 2008 - Siemens S 7

          Technical details
          pressure 200 t︱distance between columns 1050 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up 450 mm︱table surface area 1000 x 1200 mm︱table height over floor 850 mm︱side window 500 mm︱ram surface 1050 x 870 mm︱speed down 300 mm/s︱speed up 300 mm/s︱working speed 18 - 36 mm/s︱oil volume l︱power requirement 37,0 kW︱weight 16,0 t︱dimensions (WxDxH) 4,0 x 3,6 x 3,4 m︱
          year of manufacture 1988 2008: NEW control Siemens S 7 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, two-hand operation No foundation pit necessary can be offered without or with putting into operation in given condition
            pressure 200 t
            distance between columns 1050 mm
            stroke 150 mm
            distance table/ram, max. stroke . 450 mm
            table surface area 1000 x 1200 mm
            table height over floor 850 mm
            side window 500 mm
            ram surface 1050 x 870 mm
            speed down 300 mm/s
            speed up 300 mm/s
            working speed 18 - 36 mm/s
            power requirement 37,0 kW
            weight 16,0 t
            dimensions (WxDxH) 4,0 x 3,6 x 3,4 m
            Description :
            year of manufacture 1988
            2008: NEW control Siemens S 7
            permitted for manual put-in according to the CE Regulations
            with oil-hydraulic drive, hydraulic cutting impact cushioning, two-hand operation
            No foundation pit necessary
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse SCHULER-HYDRAP SH 250-2.5x1.3 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183052V · Double-Column Presse

          SCHULER-HYDRAP - SH 250-2.5x1.3 (CE) - - 2006 - Option: Siemens S7-1500 F (neu

          Technical details
          pressure 250 t︱distance between columns 3000 mm︱stroke 600 mm︱Distance table/ram, stroke up 900 mm︱Table surface area 2500 x 1300 mm︱Table height above floor 1050 mm︱Side window 1350 mm︱Ram surface 2500 x 1300 mm︱Speed down 500 mm/s︱Speed up 400 mm/s︱Working speed 36 - 64 mm/s︱Oil volume 2700 l︱Power capacity 137,0 kW︱Weight 54,0 t︱Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 3000 mm
            stroke 600 mm
            Distance table/ram, stroke up 900 mm
            Table surface area 2500 x 1300 mm
            Table height above floor 1050 mm
            Side window 1350 mm
            Ram surface 2500 x 1300 mm
            Speed down 500 mm/s
            Speed up 400 mm/s
            Working speed 36 - 64 mm/s
            Oil volume 2700 l
            Power capacity 137,0 kW
            Weight 54,0 t
            Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking
            No foundation pit necessary
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse LUIGART DRPY 300 SO (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183006A · Double-Column Presse

          LUIGART - DRPY 300 SO (CE) - - 2003 - Siemens S 7

          Technical details
          pressure 300 t︱distance between columns 1640 mm︱stroke 900 mm︱Distance table/ram, stroke up 1200 mm︱table surface area 1600 x 1300 mm︱table height over floor 890 mm︱ram surface 1600 x 1300 mm︱Speed down 400 mm/s︱Speed up 300 mm/s︱Working speed 10 mm/s︱Oil volume 1150 l︱power requirement 42,5 kW︱weight 25 t︱dimensions (WxDxH) 2,8 x 2,5 x 5,0 m︱
          year of manufacture 1994 overhaul 2003 permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary
            pressure 300 t
            distance between columns 1640 mm
            stroke 900 mm
            Distance table/ram, stroke up 1200 mm
            table surface area 1600 x 1300 mm
            table height over floor 890 mm
            ram surface 1600 x 1300 mm
            Speed down 400 mm/s
            Speed up 300 mm/s
            Working speed 10 mm/s
            Oil volume 1150 l
            power requirement 42,5 kW
            weight 25 t
            dimensions (WxDxH) 2,8 x 2,5 x 5,0 m
            Description :
            year of manufacture 1994
            overhaul 2003
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation
            No foundation pit necessary


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse LAUFFER 4 SPY 50 SO


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223051 · Double-Column Presse

          LAUFFER - 4 SPY 50 SO - - 2003 - Siemens S 7

          Technical details
          Pressure 50 t︱stroke 800 mm︱distance between columns 2250 mm︱Distance table/ram, max. stroke up, adjustment up 1600 mm︱Table surface area 2250 x 1200 mm︱Ram surface 2250 x 1200 mm︱Side window mm︱feed down 350 mm/s︱feed up 190 mm/s︱working feed 27,5 mm/s︱oil volume 800 l︱power requirement 24,2 kW︱Weight 13,0 t︱dimensions of the machine ca. 3,75 x 2,75 x 4,67 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic ram interlocking (Sitema), light guard with active start
            Pressure 50 t
            stroke 800 mm
            distance between columns 2250 mm
            Distance table/ram, max. stroke . 1600 mm
            Table surface area 2250 x 1200 mm
            Ram surface 2250 x 1200 mm
            feed down 350 mm/s
            feed up 190 mm/s
            working feed 27,5 mm/s
            oil volume 800 l
            power requirement 24,2 kW
            Weight 13,0 t
            dimensions of the machine ca. 3,75 x 2,75 x 4,67 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic ram interlocking (Sitema), light guard with active start


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse AP&T ZM 3150-25/10


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0310 · Double-Column Presse

          AP&T - ZM 3150-25/10 - - 2002 -

          Technical details
          Pressure total 315 t︱Stroke 1100 mm︱Daylight 2200 mm︱Table surface area 2500 x 1000 mm︱Approach speed 600 mm / s︱Working speed 32 - 230 mm / s︱Return speed 600 mm / s︱Weight of machine approx. 44 t︱Height over floor approx. 6175 mm︱
            Pressure total 315 t
            Stroke 1100 mm
            Daylight 2200 mm
            Table surface area 2500 x 1000 mm
            Approach speed 600 mm / s
            Working speed 32 - 230 mm / s
            Return speed 600 mm / s
            Weight of machine approx. 44 t
            Height over floor approx. 6175 mm


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse DUNKES HS 2-63


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143064 · Double-Column Presse

          DUNKES - HS 2-63 - - 1998 - konventionell

          Technical details
          Pressure 63 t︱distance between columns 1000 mm︱stroke 300 mm︱Distance table/ram, max. stroke up, adjustment up 850 mm︱table surface area 980 x 500 mm︱table height above floor 850 mm︱ram surface 130 mm︱speed down 400 mm/s︱speed up 461 mm/s︱working speed 14 - 97 mm/s︱power requirement 15,0 kW︱Weight 5,0 t︱Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m︱
          with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop No foundation pit necessary
            Pressure 63 t
            distance between columns 1000 mm
            stroke 300 mm
            Distance table/ram, max. stroke . 850 mm
            table surface area 980 x 500 mm
            table height above floor 850 mm
            ram surface 130 mm
            speed down 400 mm/s
            speed up 461 mm/s
            working speed 14 - 97 mm/s
            power requirement 15,0 kW
            Weight 5,0 t
            Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m
            Description :
            with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop
            No foundation pit necessary


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse HYDRAP HPDb 250 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183033V · Double-Column Presse

          HYDRAP - HPDb 250 (CE) - - 1996 - Option: Siemens S7-1500 F (neu

          Technical details
          pressure 250 t︱distance between columns 2100 mm︱stroke 300 mm︱Distance table/ram, stroke up 850 mm︱Table surface area 2000 x 1300 mm︱Table height above floor 900 mm︱Side window 1300 mm︱Ram surface 2000 x 1300 mm︱Speed down mm/s︱Speed up mm/s︱Working speed mm/s︱Oil volume 1300 l︱Power capacity 60,0 kW︱Weight 39,5 t︱Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 2100 mm
            stroke 300 mm
            Distance table/ram, stroke up 850 mm
            Table surface area 2000 x 1300 mm
            Table height above floor 900 mm
            Side window 1300 mm
            Ram surface 2000 x 1300 mm
            Oil volume 1300 l
            Power capacity 60,0 kW
            Weight 39,5 t
            Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking
            No foundation pit necessary
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse HYDRAP HPD-S 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183049V · Double-Column Presse

          HYDRAP - HPD-S 100 (UVV) - - 1993 - Siemens S 5

          Technical details
          pressure 100 t︱distance between columns 1900 mm︱stroke 500 mm︱Distance table/ram, stroke up 800 mm︱table surface area 1850 x 1000 mm︱Hole in the table 160 mm︱table height over floor 850 mm︱ram surface 1850 x 800 mm︱Side window 540 mm︱speed down 400 mm/s︱speed up 400 mm/s︱working speed 20 - 70 m/min︱oil volume 900 l︱Power capacity 34,0 kW︱Weight 13,0 t︱Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            distance between columns 1900 mm
            stroke 500 mm
            Distance table/ram, stroke up 800 mm
            table surface area 1850 x 1000 mm
            Hole in the table 160 mm
            table height over floor 850 mm
            ram surface 1850 x 800 mm
            Side window 540 mm
            speed down 400 mm/s
            speed up 400 mm/s
            working speed 20 - 70 m/min
            oil volume 900 l
            Power capacity 34,0 kW
            Weight 13,0 t
            Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking
            No foundation pit necessary
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse EXNER EX 40 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123054 · Double-Column Presse

          EXNER - EX 40 (UVV) - - 1992 - konventionell

          Technical details
          pressure 40 t︱distance between columns 500 mm︱stroke 150 mm︱distance table/ram, max. stroke up, adjustment up 300 mm︱table surface area 480 x 400 mm︱hole in the table 50 mm︱table height over floor 950 mm︱side window 150 mm︱ram surface 150 mm︱speed down 480 mm/s︱speed up 480 mm/s︱working speed 20 mm/s︱oil volume 160 l︱power requirement 7,5 kW︱weight 2,6 t︱dimensions (WxDxH) 1,1 x 1,4 x 2,4 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), cutting impact cushioning, mechanical depth stop, two-hand and foot operation No foundation pit necessary
            pressure 40 t
            distance between columns 500 mm
            stroke 150 mm
            distance table/ram, max. stroke . 300 mm
            table surface area 480 x 400 mm
            hole in the table 50 mm
            table height over floor 950 mm
            side window 150 mm
            ram surface 150 mm
            speed down 480 mm/s
            speed up 480 mm/s
            working speed 20 mm/s
            oil volume 160 l
            power requirement 7,5 kW
            weight 2,6 t
            dimensions (WxDxH) 1,1 x 1,4 x 2,4 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, light-guard (Sick), cutting impact cushioning, mechanical depth stop, two-hand and foot operation
            No foundation pit necessary


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse HYDRAP HPDb 400


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-08040 · Double-Column Presse

          HYDRAP - HPDb 400 - - 1991 - SIEMENS Simatic S 5

          Technical details
          pressure 400 t︱stroke 300 mm︱table surface area 1200 x 700 mm︱ram surface 1200 x 700 mm︱dayligth 500 mm︱adjustment of stroke 300 mm︱return capacity 348 kN︱capacity of ejector 100 kN︱ejector stroke 100 mm︱control SIEMENS Simatic S 5 ︱total power requirement 65 kW︱weight of the machine ca. 28 t︱dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m︱
          = Frame press Accessories: tool changing table - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m
            pressure 400 t
            stroke 300 mm
            table surface area 1200 x 700 mm
            ram surface 1200 x 700 mm
            dayligth 500 mm
            adjustment of stroke 300 mm
            return capacity 348 kN
            capacity of ejector 100 kN
            ejector stroke 100 mm
            control SIEMENS Simatic S 5
            total power requirement 65 kW
            weight of the machine ca. 28 t
            dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m
            Description :
            = Frame press

            Accessories: tool changing table

            - with cutting shock absorption
            damping force 4000 kN
            damping stroke 5 mm
            spindle adjustment 200 m




        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Double-Column Presse LAEPPLE SE 500 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083071 · Double-Column Presse

          LAEPPLE - SE 500 (UVV) - - 1991 -

          Technical details
          pressure 500 t︱distance between columns 3200 mm︱stroke 1250 mm︱distance table/ram, max. stroke up, adjustment up 1810 mm︱table surface area 3000 x 1900 mm︱pressure of drawing cushion in ram 150 t︱stroke of drawing cushion in ram 200 mm︱drawing cushion area in ram 2400 x 1200 mm︱ram surface 3160 x 1900 mm︱speed down 400 mm/s︱speed up 250 mm/s︱working speed 18 - 58 mm/s︱oil volume l︱height over floor 6,5 m︱power requirement 90,0 + 36,5 kW︱weight 110 t︱Dimensions (WxDxH) m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in ram, ram interlocking year of manufacture 1976 year of modernization 1991 can only be offered without putting into operation
            pressure 500 t
            distance between columns 3200 mm
            stroke 1250 mm
            distance table/ram, max. stroke . 1810 mm
            table surface area 3000 x 1900 mm
            pressure of drawing cushion in r. 150 t
            stroke of drawing cushion in ram 200 mm
            drawing cushion area in ram 2400 x 1200 mm
            ram surface 3160 x 1900 mm
            speed down 400 mm/s
            speed up 250 mm/s
            working speed 18 - 58 mm/s
            height over floor 6,5 m
            power requirement 90,0 + 36,5 kW
            weight 110 t
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in ram, ram interlocking
            year of manufacture 1976
            year of modernization 1991
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •