'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Single Column Press - Hydraulic

          Machinelist: Single Column Press - Hydraulic


          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic NEFF CHS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103044 · Single Column Press - Hydraulic

          NEFF - CHS 160 (UVV) - - 2020 - Siemens S7-1500F

          Technical details
          pressure 160 t︱throat 350 mm︱stroke 140 mm︱dayligth 370 mm︱table surface area 750 x 620 mm︱hole in the table 220 mm︱table height over floor 850 mm︱ram surface 750 x 580 mm︱oil volume 700 l︱feed down 300 mm/sec︱feed up 480 mm/sec︱feed under pressure 58 mm/sec︱total power requirement 60 kW︱weight of the machine ca. 10,8 t︱required space 2,4 x 1,8 x 3,5 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable two-hand operation 2020: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Design of the electrical control according to DIN EN ISO 16092-1/-2/-3 year of manufacture 1995
            pressure 160 t
            throat 350 mm
            stroke 140 mm
            dayligth 370 mm
            table surface area 750 x 620 mm
            hole in the table 220 mm
            table height over floor 850 mm
            ram surface 750 x 580 mm
            oil volume 700 l
            feed down 300 mm/sec
            feed up 480 mm/sec
            feed under pressure 58 mm/sec
            total power requirement 60 kW
            weight of the machine ca. 10,8 t
            required space 2,4 x 1,8 x 3,5 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable two-hand operation
            2020: new electrical (safety) control - Siemens S7-1500 F,
            easy operation via touch-panel
            Design of the electrical control according to DIN EN ISO 16092-1/-2/-3
            year of manufacture 1995
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic EXNER EEX 25


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233012 · Single Column Press - Hydraulic

          EXNER - EEX 25 - - 2000 - Siemens S 5

          Technical details
          pressure 25 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume 300 l︱power requirement 5,5 kW︱Weight 5,8 t︱dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 25 t
            stroke 150 mm
            throat 420 mm
            dayligth 450 mm
            table surface area 700 x 820 mm
            table height over floor 850 mm
            ram surface 600 x 600 mm
            feed down 370 mm/s
            feed up 370 mm/s
            working feed 18 - 33 mm/s
            oil volume 300 l
            power requirement 5,5 kW
            Weight 5,8 t
            dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173063 · Single Column Press - Hydraulic

          DUNKES - HZ 40 (CE) - - 1997 - konventionell

          Technical details
          pressure 40 t︱throat 300 mm︱stroke 630 mm︱dayligth 900 mm︱table surface area 620 x 520 mm︱hole in the table 150 mm︱table height over floor 600 mm︱ram surface 150 mm︱total power requirement 15,0 kW︱weight of the machine ca. 4,5 t︱required space 1,0 x 1,9 x 3,0 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 300 mm
            stroke 630 mm
            dayligth 900 mm
            table surface area 620 x 520 mm
            hole in the table 150 mm
            table height over floor 600 mm
            ram surface 150 mm
            total power requirement 15,0 kW
            weight of the machine ca. 4,5 t
            required space 1,0 x 1,9 x 3,0 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            press can be inspected in running condition in our warehouse
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF EP-S 40 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173057 · Single Column Press - Hydraulic

          NEFF - EP-S 40 (CE) - - 1996 - Siemens S 5

          Technical details
          pressure 40 t︱throat 330 mm︱stroke 250 mm︱dayligth 450 mm︱table surface area 800 x 500 mm︱hole in the table 100 mm︱table height over floor 900 mm︱ram surface 100 mm︱feed down 406 mm/sec︱feed up 393 mm/sec︱feed under pressure 14 mm/sec︱oil volume 350 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,6 t︱required space 1,3 x 2,3 x 3,4 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse
            pressure 40 t
            throat 330 mm
            stroke 250 mm
            dayligth 450 mm
            table surface area 800 x 500 mm
            hole in the table 100 mm
            table height over floor 900 mm
            ram surface 100 mm
            feed down 406 mm/sec
            feed up 393 mm/sec
            feed under pressure 14 mm/sec
            oil volume 350 l
            total power requirement 7,5 kW
            weight of the machine ca. 4,6 t
            required space 1,3 x 2,3 x 3,4 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation
            press can be inspected in running condition in our warehouse
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic HYDRAP HPSK 100 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183039 · Single Column Press - Hydraulic

          HYDRAP - HPSK 100 (CE) - - 1996 - Option: Siemens S7-1500 F (neu

          Technical details
          pressure 100 t︱throat 510 mm︱stroke 600 mm︱dayligth 1000 mm︱table surface area 1025 x 650 mm︱table height over floor 970 mm︱ram surface 1025 x 650 mm︱feed down 350 mm/sec︱feed up 330 mm/sec︱working feed 30 - 43 mm/sec︱oil volume 540 l︱total power requirement 48,0 kW︱weight of the machine ca. 12,0 t︱required space 1,2 x 2,7 x 3,9 m︱
          permitted for manual loading according to the CE Regulations with oil-hydraulic drive Video of the finished 'sister machine' - with new electrical control - available
            pressure 100 t
            throat 510 mm
            stroke 600 mm
            dayligth 1000 mm
            table surface area 1025 x 650 mm
            table height over floor 970 mm
            ram surface 1025 x 650 mm
            feed down 350 mm/sec
            feed up 330 mm/sec
            working feed 30 - 43 mm/sec
            oil volume 540 l
            total power requirement 48,0 kW
            weight of the machine ca. 12,0 t
            required space 1,2 x 2,7 x 3,9 m
            Description :
            permitted for manual loading according to the CE Regulations
            with oil-hydraulic drive
            Video of the finished 'sister machine' - with new electrical control - available
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 63.11.32 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143024 · Single Column Press - Hydraulic

          MUELLER - CD 63.11.32 (UVV) - - 1993 - Siemens S 7

          Technical details
          pressure 63 t︱stroke 160 mm︱throat 280 mm︱dayligth 360 mm︱table surface area 560 x 490 mm︱table height over floor 860 mm︱ram surface 280 x 280 mm︱oil volume l︱power requirement 22,0 kW︱Weight 3,6 t︱dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm︱hole in the table 125 mm︱
          year of manufacture1980 Modernization of control 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            pressure 63 t
            stroke 160 mm
            throat 280 mm
            dayligth 360 mm
            table surface area 560 x 490 mm
            table height over floor 860 mm
            ram surface 280 x 280 mm
            power requirement 22,0 kW
            Weight 3,6 t
            dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm
            hole in the table 125 mm
            Description :
            year of manufacture1980
            Modernization of control 1993
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 6,3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233004 · Single Column Press - Hydraulic

          DUNKES - HZ 6,3 - - 1993 - konventionell

          Technical details
          pressure 2 x 6,3 t︱stroke 307 mm︱throat 180 mm︱dayligth 900 mm︱table surface area 470 x 360 mm︱die cushion capacity t︱die cushion stroke mm︱die cushion area mm︱table height over floor 810 mm︱ram surface 45 mm︱feed down 137 mm/s︱feed up 33 mm/s︱working feed 540 mm/s︱oil volume 140 l︱power requirement 3,0 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t
            pressure 2 x 6,3 t
            stroke 307 mm
            throat 180 mm
            dayligth 900 mm
            table surface area 470 x 360 mm
            table height over floor 810 mm
            ram surface 45 mm
            feed down 137 mm/s
            feed up 33 mm/s
            working feed 540 mm/s
            oil volume 140 l
            power requirement 3,0 kW
            Weight 1,5 t
            dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

            Press has 2 Press shafts - press force 2 x 6,3 t
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 100.11.30 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133037 · Single Column Press - Hydraulic

          MUELLER - CD 100.11.30 (UVV) - - 1993 - konventionell

          Technical details
          pressure 100 t︱throat 320 mm︱stroke 160 mm︱dayligth 480 mm︱table surface area 630 x 550 mm︱hole in the table 200 mm︱table height over floor 860 mm︱ram surface 560 x 450 mm︱oil volume 500 l︱total power requirement 30,5 kW︱weight of the machine ca. 6,4 t︱required space 1,6 x 2,0 x 2,9 m︱
          year of manufacture 1979 overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request
            pressure 100 t
            throat 320 mm
            stroke 160 mm
            dayligth 480 mm
            table surface area 630 x 550 mm
            hole in the table 200 mm
            table height over floor 860 mm
            ram surface 560 x 450 mm
            oil volume 500 l
            total power requirement 30,5 kW
            weight of the machine ca. 6,4 t
            required space 1,6 x 2,0 x 2,9 m
            Description :
            year of manufacture 1979
            overhaul 1993
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation
            press can be inspected in running condition in our warehouse - can also be offered with new control on request
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZS 160 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093006 · Single Column Press - Hydraulic

          DUNKES - HZS 160 (UVV) - - 1992 - Dunkes PC 10

          Technical details
          pressure 160 t︱stroke 150 mm︱throat 370 mm︱dayligth 500 mm︱table surface area 1000 x 700 mm︱table height over floor 820 mm︱ram surface 600 x 520 mm︱feed down 350 mm/s︱feed up 350 mm/s︱working feed 12 - 36 mm/s︱oil volume 1100 l︱power requirement 27,0 kW︱Weight 16,5 t︱dimensions of the machine ca. 1,8 x 2,7 x 3,95 mxmxm︱hole in the table 100 mm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop (motoric adjustable), two-hand operation
            pressure 160 t
            stroke 150 mm
            throat 370 mm
            dayligth 500 mm
            table surface area 1000 x 700 mm
            table height over floor 820 mm
            ram surface 600 x 520 mm
            feed down 350 mm/s
            feed up 350 mm/s
            working feed 12 - 36 mm/s
            oil volume 1100 l
            power requirement 27,0 kW
            Weight 16,5 t
            dimensions of the machine ca. 1,8 x 2,7 x 3,95 mxmxm
            hole in the table 100 mm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop (motoric adjustable), two-hand operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic EXNER EEX 40


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233013 · Single Column Press - Hydraulic

          EXNER - EEX 40 - - 1991 - konventionell

          Technical details
          pressure 40 t︱stroke 150 mm︱throat 420 mm︱dayligth 450 mm︱table surface area 700 x 820 mm︱table height over floor 850 mm︱ram surface 600 x 600 mm︱feed down 370 mm/s︱feed up 370 mm/s︱working feed 18 - 33 mm/s︱oil volume l︱power requirement 8,0 kW︱Weight 5,0 t︱dimensions of the machine ca. 1,1 x 1,9 x 2,4 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 40 t
            stroke 150 mm
            throat 420 mm
            dayligth 450 mm
            table surface area 700 x 820 mm
            table height over floor 850 mm
            ram surface 600 x 600 mm
            feed down 370 mm/s
            feed up 370 mm/s
            working feed 18 - 33 mm/s
            power requirement 8,0 kW
            Weight 5,0 t
            dimensions of the machine ca. 1,1 x 1,9 x 2,4 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic NEFF S 6,3 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083153 · Single Column Press - Hydraulic

          NEFF - S 6,3 (UVV) - - 1991 - Siemens S 7

          Technical details
          pressure 6,3 t︱stroke 250 mm︱throat 320 mm︱dayligth 600 mm︱table surface area 550 x 400 mm︱table height over floor 525 mm︱ram surface 65 mm︱oil volume 90 l︱power requirement 5,5 kW︱Weight 1,6 t︱dimensions of the machine ca. 1,7 x 1,5 x 2,6 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, depth stop, two-hand operation
            pressure 6,3 t
            stroke 250 mm
            throat 320 mm
            dayligth 600 mm
            table surface area 550 x 400 mm
            table height over floor 525 mm
            ram surface 65 mm
            oil volume 90 l
            power requirement 5,5 kW
            Weight 1,6 t
            dimensions of the machine ca. 1,7 x 1,5 x 2,6 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, depth stop, two-hand operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic SCHOEN U-NH-C 65 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163079 · Single Column Press - Hydraulic

          SCHOEN - U-NH-C 65 (UVV) - - 1990 - Siemens S 5

          Technical details
          pressure 60 t︱throat 400 mm︱stroke 600 mm︱dayligth 700 mm︱table surface area 1120 x 700 mm︱hole in the table mm︱table height over floor 850 mm︱ram surface 700 x 700 mm︱feed down 300 mm/sec︱feed up 130 / 260 mm/sec︱feed under pressure 5 / 10 mm/sec︱oil volume 275 l︱total power requirement 7,5 kW︱weight of the machine ca. 7,3 t︱required space 1,6 x 2,0 x 3,7 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, mechanical depth stop (motoric adjustable), controllable dependant on pressure/time and way can be inspected in running condition in our warehouse - new control can be offeren on request
            pressure 60 t
            throat 400 mm
            stroke 600 mm
            dayligth 700 mm
            table surface area 1120 x 700 mm
            table height over floor 850 mm
            ram surface 700 x 700 mm
            feed down 300 mm/sec
            feed up 130 / 260 mm/sec
            feed under pressure 5 / 10 mm/sec
            oil volume 275 l
            total power requirement 7,5 kW
            weight of the machine ca. 7,3 t
            required space 1,6 x 2,0 x 3,7 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, mechanical depth stop (motoric adjustable), controllable dependant on pressure/time and way
            can be inspected in running condition in our warehouse - new control can be offeren on request
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CT 10.2.1 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133014 · Single Column Press - Hydraulic

          MUELLER - CT 10.2.1 (UVV) - - 1990 - konventionell

          Technical details
          pressure 10 t︱stroke 300 mm︱throat 250 mm︱dayligth 500 mm︱table surface area 450 x 400 mm︱table height over floor 850 mm︱ram surface 400 x 350 mm︱oil volume l︱power requirement 5,5 kW︱Weight 1,5 t︱dimensions of the machine ca. 1,1 x 1,25 x 2,4 mxmxm︱hole in the table 80 mm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand and foot operation
            pressure 10 t
            stroke 300 mm
            throat 250 mm
            dayligth 500 mm
            table surface area 450 x 400 mm
            table height over floor 850 mm
            ram surface 400 x 350 mm
            power requirement 5,5 kW
            Weight 1,5 t
            dimensions of the machine ca. 1,1 x 1,25 x 2,4 mxmxm
            hole in the table 80 mm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand and foot operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 160.20.2 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123154 · Single Column Press - Hydraulic

          MUELLER - CD 160.20.2 (UVV) - - 1990 - konventionell

          Technical details
          pressure 160 t︱stroke 200 mm︱throat 500 mm︱dayligth 500 mm︱table surface area 1140 x 980 mm︱table height over floor 860 mm︱ram surface 1000 x 800 mm︱oil volume 1000 l︱power requirement 50,0 kW︱Weight 18,0 t︱dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm︱hole in the table 180 mm︱
          yom 1981 modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 160 t
            stroke 200 mm
            throat 500 mm
            dayligth 500 mm
            table surface area 1140 x 980 mm
            table height over floor 860 mm
            ram surface 1000 x 800 mm
            oil volume 1000 l
            power requirement 50,0 kW
            Weight 18,0 t
            dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm
            hole in the table 180 mm
            Description :
            yom 1981
            modernization 1990
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 25 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123051 · Single Column Press - Hydraulic

          DUNKES - HZ 25 (UVV) - - 1988 - konventionell

          Technical details
          pressure 25 t︱stroke 1000 mm︱throat 400 mm︱dayligth 1100 mm︱table surface area 620 x 620 mm︱table height over floor 650 mm︱ram surface 110 mm︱feed down 300 mm/s︱feed up 500 mm/s︱working feed 14 - 85 mm/s︱oil volume 400 l︱power requirement 6,0 kW︱Weight 3,8 t︱dimensions of the machine ca. 1,5 x 2,1 x 3,9 mxmxm︱hole in the table 80 mm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, delicate foot-pedal control
            pressure 25 t
            stroke 1000 mm
            throat 400 mm
            dayligth 1100 mm
            table surface area 620 x 620 mm
            table height over floor 650 mm
            ram surface 110 mm
            feed down 300 mm/s
            feed up 500 mm/s
            working feed 14 - 85 mm/s
            oil volume 400 l
            power requirement 6,0 kW
            Weight 3,8 t
            dimensions of the machine ca. 1,5 x 2,1 x 3,9 mxmxm
            hole in the table 80 mm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, delicate foot-pedal control
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CKD 160.1.2 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103004 · Single Column Press - Hydraulic

          MUELLER - CKD 160.1.2 (UVV) - - 1987 - Siemens S 5

          Technical details
          pressure 160 t︱stroke 200 mm︱throat 360 mm︱dayligth 500 mm︱table surface area 920 x 700 mm︱table height over floor 960 mm︱ram surface 620 x 560 mm︱feed down 390 mm/s︱feed up 390 mm/s︱working feed 58 mm/s︱oil volume l︱power requirement 30,0 kW︱Weight 16,0 t︱dimensions of the machine ca. 1,6 x 2,5 x 3,6 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on way, cutting impact cushioning, depth stop, two-hand operation
            pressure 160 t
            stroke 200 mm
            throat 360 mm
            dayligth 500 mm
            table surface area 920 x 700 mm
            table height over floor 960 mm
            ram surface 620 x 560 mm
            feed down 390 mm/s
            feed up 390 mm/s
            working feed 58 mm/s
            power requirement 30,0 kW
            Weight 16,0 t
            dimensions of the machine ca. 1,6 x 2,5 x 3,6 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on way, cutting impact cushioning, depth stop, two-hand operation
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic MUELLER CD 63.12.45


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173034 · Single Column Press - Hydraulic

          MUELLER - CD 63.12.45 - - 1986 - konventionell

          Technical details
          pressure 63 t︱stroke 160 mm︱throat 270 mm︱dayligth 360 mm︱table surface area 560 x 490 mm︱table height over floor 850 mm︱ram surface 450 x 360 mm︱oil volume 360 l︱power requirement 23,0 kW︱Weight 4,60 t︱dimensions of the machine ca. 1,2 x 1,8 x 2,9 mxmxm︱hole in the table 280 x 190 mm︱
          with oil-hydraulic drive, depth stop
            pressure 63 t
            stroke 160 mm
            throat 270 mm
            dayligth 360 mm
            table surface area 560 x 490 mm
            table height over floor 850 mm
            ram surface 450 x 360 mm
            oil volume 360 l
            power requirement 23,0 kW
            Weight 4,60 t
            dimensions of the machine ca. 1,2 x 1,8 x 2,9 mxmxm
            hole in the table 280 x 190 mm
            Description :
            with oil-hydraulic drive, depth stop
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic DUNKES HZ 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073068 · Single Column Press - Hydraulic

          DUNKES - HZ 100 (UVV) - - 1985 - konventionell

          Technical details
          pressure 100 t︱stroke 650 mm︱throat 380 mm︱dayligth 950 mm︱table surface area 800 x 700 mm︱table height over floor 920 mm︱ram surface 630 x 600 mm︱feed down 65 mm/s︱feed up 375 mm/s︱working feed 17 mm/s︱oil volume 350 l︱power requirement 18,5 kW︱Weight 9,0 t︱dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 650 mm
            throat 380 mm
            dayligth 950 mm
            table surface area 800 x 700 mm
            table height over floor 920 mm
            ram surface 630 x 600 mm
            feed down 65 mm/s
            feed up 375 mm/s
            working feed 17 mm/s
            oil volume 350 l
            power requirement 18,5 kW
            Weight 9,0 t
            dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation
            can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic ZEULENRODA PYE 40 N


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103069 · Single Column Press - Hydraulic

          ZEULENRODA - PYE 40 N - - 1985 - konventionell

          Technical details
          pressure 40 t︱stroke 500 mm︱throat 360 mm︱dayligth 1000 mm︱table surface area 630 x 500 mm︱table height over floor 1060 / 720 mm︱ram surface 450 x 360 mm︱feed down 60 mm/s︱feed up 300 mm/s︱working feed mm/s︱oil volume l︱power requirement 7,5 kW︱Weight 2,75 t︱dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm︱hole in the table 200 mm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm)
            pressure 40 t
            stroke 500 mm
            throat 360 mm
            dayligth 1000 mm
            table surface area 630 x 500 mm
            table height over floor 1060 / 720 mm
            ram surface 450 x 360 mm
            feed down 60 mm/s
            feed up 300 mm/s
            power requirement 7,5 kW
            Weight 2,75 t
            dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm
            hole in the table 200 mm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, intermediate plate (height 340 mm)
          Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic ZEULENRODA PYE 25


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123083 · Single Column Press - Hydraulic

          ZEULENRODA - PYE 25 - - - konventionell

          Technical details
          pressure 25 t︱stroke 500 mm︱throat 355 mm︱dayligth 800 mm︱table surface area 500 x 500 mm︱table height over floor 700 mm︱ram surface 250 x 250 mm︱oil volume l︱power requirement 7,5 kW︱Weight 2,1 t︱dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm︱hole in the table 180 mm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive
            pressure 25 t
            stroke 500 mm
            throat 355 mm
            dayligth 800 mm
            table surface area 500 x 500 mm
            table height over floor 700 mm
            ram surface 250 x 250 mm
            power requirement 7,5 kW
            Weight 2,1 t
            dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm
            hole in the table 180 mm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with oil-hydraulic drive
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Vögtle Service GmbH   73054 - Eislingen Friedhofstr. 115 Deutschland
          Vögtle Service GmbH

          Friedhofstr. 115



          Contact Trader


            Vögtle Service GmbH
           Friedhofstr. 115
            73054 - Eislingen
            Deutschland
            +49 71 61 99 73- 0
            +49 71 61 99 73- 13
            Thomas.Ruckh@voegtle.de
            www.voegtle.de
            Contact person:

            Haben Sie eine Presse abzugeben? Wir kaufen Ihre gute Gebrauchte. Bitte nehmen Sie Kontakt mit uns auf!




          Machine category


          Abfallschere · Abgratpresse · Abkantpresse - hydraulisch · Abrollmulde-Richtmaschine · Abwickelhaspel · Abwickelhaspel-Richtmaschine · Aufspannplatte · Auswerfer · Bandanlage · Bandbeöler · Differenzwegpresse · Doppeldruckpresse · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Doppelständerziehpresse - Mechanisch · Einsenkpresse · Einständerpresse - Hydraulisch · Einständerziehpresse - Hydraulisch · Exzenterpresse - Einständer · Haspel · Hydroformpresse · Kniegelenkpresse - Einständer · Kniehebelpresse - Einständer · Luftkessel · Nutenstanze · Pneumatische Presse · Richtmaschine · Richtplatte · Richtpresse - Einständer · Schmiedepresse · Spindelpresse · Stanzautomat-Doppelständer · Taumel- und Nietmaschine · Tuschierpresse · Verschiebetisch · Vorschubrichtmaschine · Walzenvorschub · Werkzeugprobierpresse · Werkzeugwechselwagen · Zangenvorschub · Ziehkissen ·