'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 1270x60S


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300003 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 1270x60S - - NEU - DELEM DA 58 T

          Technical details
          pressure 60 t︱chamfer lenght 1270 mm︱distance between columns 1000 mm︱dayligth 530 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 165,0 mm/sec︱work height max. 900 mm︱quantity of oil 150 l︱Control DELEM DA 58 T ︱total power requirement 7,5 kW︱weight of the machine ca. 4320 kg︱dimensions 2,25 x 1,96 x 2,75 m︱
          -------------------------------------------------- --------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 60 t
            chamfer lenght 1270 mm
            distance between columns 1000 mm
            dayligth 530 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 165,0 mm/sec
            work height max. 900 mm
            quantity of oil 150 l
            Control DELEM DA 58 T
            total power requirement 7,5 kW
            weight of the machine ca. 4320 kg
            dimensions 2,25 x 1,96 x 2,75 m
            Description :
            -------------------------------------------------- ---------
            CNC press brake with special equipment
            * Version "ERGO" - knee room for the operator
            * flexible articulated arm mount for the controller
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------

            Furnishing:
            - DELEM CNC control model DA-58T graphic/touch screen
            * 2D graphical programming
            * 15" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes : Y1 - Y2 - X - R
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - Front, foldable sheet metal support
            - Double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 3.135


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300001 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 3.135 - - NEU - DELEM DA 58 T

          Technical details
          pressure 135 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 120,0 mm/sec︱work height max. 900 mm︱quantity of oil 200 l︱Control DELEM DA 58 T ︱total power requirement 11 kW︱weight of the machine ca. 8650 kg︱dimensions 4250 x 2050 x 2800 mm︱
          -------------------------------------------------- --------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 135 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 120,0 mm/sec
            work height max. 900 mm
            quantity of oil 200 l
            Control DELEM DA 58 T
            total power requirement 11 kW
            weight of the machine ca. 8650 kg
            dimensions 4250 x 2050 x 2800 mm
            Description :
            -------------------------------------------------- ---------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            -------------------------------------------------- ---------
            Furnishing:
            - DELEM CNC control model DA-66T graphic/touch screen
            * 2D graphical programming
            * 17" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            * intuitive, graphical entry of profiles
            * Automatic calculation of features: tool safety zones,
            Press force, bending tolerance, crown setting, stretched
            Length, embossing force, flattening, automatic rounding calculation
            * Radius programming
            * Graphic tool and product library
            * Collision monitoring
            * 3D visualization
            * 1GB memory
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 4.220


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300006 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 4.220 - - NEU - DELEM DA 66T

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱dayligth 550 mm︱throat 410 mm︱stroke 275 mm︱working feed 10,0 mm/sec︱return speed 185 mm/sec︱quantity of oil 300 l︱Control DELEM DA 66T ︱total power requirement 18,5 kW︱weight of the machine ca. 13900 kg︱dimensions 5150 x 2250 x 3000 mm︱
          HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH/HOERBIGER hydr. components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2 front support arms with SLIDING system (slide bearing) - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Special equipment included: - electric central lubrication
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            dayligth 550 mm
            throat 410 mm
            stroke 275 mm
            working feed 10,0 mm/sec
            return speed 185 mm/sec
            quantity of oil 300 l
            Control DELEM DA 66T
            total power requirement 18,5 kW
            weight of the machine ca. 13900 kg
            dimensions 5150 x 2250 x 3000 mm
            Description :
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            increased projection
            -------------------------------------------------- -------
            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touch screen control unit
            - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split deer foot upper tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Universal die block
            - LEUZE light barrier behind d. machine
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC)
            - 2 front support arms with SLIDING system (slide bearing)
            - Double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes
            Special equipment included:
            - electric central lubrication


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 26.100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308335 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 26.100 - - 2017 -

          Technical details
          pressure 100 t︱chamfer lenght 2600 mm︱distance between columns 2200 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 155 mm/sec︱work speed 9,5 mm/sec︱work stroke 275 mm︱dayligth 530 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 150 ltr.︱voltage 400 Volt︱Number of working hours ~ 1.990 h︱total power requirement 7,5 kW︱weight 6.850 kg︱range L-W-H 3.750x1.950x2.800 mm︱
          ** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition ** with only approx. 1.990 operating hours (!!) -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308335 * Machinevideo : https://www.youtube.com/watch?v=t9gPmzchB6Y
            pressure 100 t
            chamfer lenght 2600 mm
            distance between columns 2200 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 155 mm/sec
            work speed 9,5 mm/sec
            work stroke 275 mm
            dayligth 530 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 150 ltr.
            voltage 400 Volt
            Number of working hours ~ 1.990 h
            total power requirement 7,5 kW
            weight 6.850 kg
            range L-W-H 3.750x1.950x2.800 mm
            Description :
            ** Current new price ~ 60.000 euros
            ** Special price on request
            ** from a maintenance workshop - good condition
            ** with only approx. 1.990 operating hours (!!)

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA-56 (ER 70)
            * 2D graphical programming
            * 10.4" TFT color screen with high resolution
            * Bending sequence calculation
            * USB interface
            - Swiveling control panel, mounted on the left
            - CNC motorized backgauge with R axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - CNC controlled axes Y1 - Y2 - X - R - C (crowning)
            - CNC electric table crowning
            - divided deer foot upper tool Rolleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Divided universal die block Rolleri M 460 R, including die shoe
            - BOSCH/HOERBIGER hydraulic components
            - SIEMENS electrical system
            - Safety device = light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device in front of the machine
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x free-moving double foot control
            - Operation manual machine + CNC controler

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308335

            * Machinevideo :
            https://www.youtube.com/watch?v=t9gPmzchB6Y


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 26.100


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96877 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 26.100 - - 2017 -

          Technical details
          pressure 100 t︱chamfer lenght 2600 mm︱distance between columns 2200 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 155 mm/sec︱work speed 9,5 mm/sec︱work stroke 275 mm︱dayligth 530 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 150 ltr.︱voltage 400 Volt︱total power requirement 7,5 kW︱weight 6.850 kg︱range L-W-H 3.750x1.950x2.800 mm︱
          ** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition (!!) -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler
            pressure 100 t
            chamfer lenght 2600 mm
            distance between columns 2200 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 155 mm/sec
            work speed 9,5 mm/sec
            work stroke 275 mm
            dayligth 530 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 150 ltr.
            voltage 400 Volt
            total power requirement 7,5 kW
            weight 6.850 kg
            range L-W-H 3.750x1.950x2.800 mm
            Description :
            ** Current new price ~ 60.000 euros
            ** Special price on request
            ** from a maintenance workshop - good condition (!!)

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA-56 (ER 70)
            * 2D graphical programming
            * 10.4" TFT color screen with high resolution
            * Bending sequence calculation
            * USB interface
            - Swiveling control panel, mounted on the left
            - CNC motorized backgauge with R axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - CNC controlled axes Y1 - Y2 - X - R - C (crowning)
            - CNC electric table crowning
            - divided deer foot upper tool Rolleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Divided universal die block Rolleri M 460 R, including die shoe
            - BOSCH/HOERBIGER hydraulic components
            - SIEMENS electrical system
            - Safety device = light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device in front of the machine
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x free-moving double foot control
            - Operation manual machine + CNC controler




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK Power-Bend Pro 1270x40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021129 · Hydr. pressbrake

          ERMAK - Power-Bend Pro 1270x40 - - 2014 -

          Technical details
          pressure 40 t︱chamfer lenght 1270 mm︱weight of the machine ca. 3250 kg︱dimensions of the machine ca. 2150x1650x2300 mm︱
            pressure 40 t
            chamfer lenght 1270 mm
            weight of the machine ca. 3250 kg
            dimensions of the machine ca. 2150x1650x2300 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake Ermak AP 2600-80


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5517 · Hydr. pressbrake

          Ermak - AP 2600-80 - - 2004 - Siemens Sinamics G110

          Technical details
          pressure 80 t︱chamfer lenght - mm︱distance between columns - mm︱control Siemens Sinamics G110 ︱total power requirement kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱
            pressure 80 t
            chamfer lenght - mm
            distance between columns - mm
            control Siemens Sinamics G110
            weight of the machine ca. 5500 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 12.40


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308135 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 12.40 - - -

          Technical details
          pressure 40 t︱chamfer lenght 1270 mm︱distance between columns 1050 mm︱column arm 350 mm︱dayligth 387 mm︱max. ram stroke 170 mm︱feed down 140 mm/sec︱feed up 170 mm/sec︱pressing speed 17 mm/sec︱main drive 5,5 kW︱table height 850 mm︱back stop - adjustable 800 mm︱adjustment speed 230 mm/min︱total power requirement 5,5 kW︱weight of the machine ca. 3,22 To.︱dimensions of the machine ca. 2,15 x 2,3 x 1,65 m︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 40 t
            chamfer lenght 1270 mm
            distance between columns 1050 mm
            column arm 350 mm
            dayligth 387 mm
            max. ram stroke 170 mm
            feed down 140 mm/sec
            feed up 170 mm/sec
            pressing speed 17 mm/sec
            main drive 5,5 kW
            table height 850 mm
            back stop - adjustable 800 mm
            adjustment speed 230 mm/min
            total power requirement 5,5 kW
            weight of the machine ca. 3,22 To.
            dimensions of the machine ca. 2,15 x 2,3 x 1,65 m
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 58T (TouchScreen)
            - Motorized backgauge with R-axis, on recirculating ball spindles
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
            - Additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm holder
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "sliding system", with T-slot and tilting cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK ECO BEND EXPERT 26.80


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308093 · Hydr. pressbrake

          ERMAK - ECO BEND EXPERT 26.80 - - -

          Technical details
          pressure 80 t︱chamfer lenght 2600 mm︱distance between columns 2200 mm︱column arm 250 mm︱ram stroke speed 90 mm/sec︱return speed 7,5 mm/sec︱work speed 60 mm/min︱work stroke 160 mm︱dayligth 380 mm︱oil volume 150 ltr.︱table height 900 mm︱voltage 400 Volt︱weight 5.227 kg︱range L-W-H 3750x1950x2400 mm︱
          Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes
            pressure 80 t
            chamfer lenght 2600 mm
            distance between columns 2200 mm
            column arm 250 mm
            ram stroke speed 90 mm/sec
            return speed 7,5 mm/sec
            work speed 60 mm/min
            work stroke 160 mm
            dayligth 380 mm
            oil volume 150 ltr.
            table height 900 mm
            voltage 400 Volt
            weight 5.227 kg
            range L-W-H 3750x1950x2400 mm
            Description :
            Furnishing:
            - DELEM - CNC control model DA-58T
            - controlled axes: Y1 - Y2 and X
            - AKAS laser in front of the machine
            - manual crowning
            - Upper tool, deer foot
            - Lower tool, die block with 4Vs
            - SICK light barrier behind the machine
            - 2 front support arms
            - SIEMENS - electrical system
            - BOSCH / HOERBIGER hydraulic system
            - CE mark / declaration of conformity
            - Operating manual: machine and control
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 26.100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8303218 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 26.100 - - -

          Technical details
          pressure 100 t︱chamfer lenght 2600 mm︱distance between columns 2200 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 155 mm/sec︱work speed 9,5 mm/sec︱work stroke 275 mm︱dayligth 530 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 150 ltr.︱voltage 400 Volt︱total power requirement 7,5 kW︱weight 6.850 kg︱range L-W-H 3.750x1.950x2.800 mm︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 100 t
            chamfer lenght 2600 mm
            distance between columns 2200 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 155 mm/sec
            work speed 9,5 mm/sec
            work stroke 275 mm
            dayligth 530 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 150 ltr.
            voltage 400 Volt
            total power requirement 7,5 kW
            weight 6.850 kg
            range L-W-H 3.750x1.950x2.800 mm
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 53T (touchscreen)
            - Motorized backgauge with R-axis, on recirculating ball spindles
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
            - Additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm holder
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "sliding system", with T-slot and tilting cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK ECO BEND EXPERT 37.160


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308084 · Hydr. pressbrake

          ERMAK - ECO BEND EXPERT 37.160 - - -

          Technical details
          pressure 160 t︱chamfer lenght 3760 mm︱distance between columns 3250 mm︱column arm 250 mm︱ram stroke speed 90 mm/sec︱return speed 6,1 mm/sec︱work speed 60 mm/min︱work stroke 160 mm︱dayligth 395 mm︱oil volume 200 ltr.︱table height 900 mm︱voltage 400 Volt︱weight 8.514 kg︱range L-W-H 4910x1900x2550 mm︱
          Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes
            pressure 160 t
            chamfer lenght 3760 mm
            distance between columns 3250 mm
            column arm 250 mm
            ram stroke speed 90 mm/sec
            return speed 6,1 mm/sec
            work speed 60 mm/min
            work stroke 160 mm
            dayligth 395 mm
            oil volume 200 ltr.
            table height 900 mm
            voltage 400 Volt
            weight 8.514 kg
            range L-W-H 4910x1900x2550 mm
            Description :
            Furnishing:
            - DELEM - CNC control model DA-58T
            - controlled axes: Y1 - Y2 and X
            - SICK light barrier in front of the machine
            - Upper tool, deer foot
            - Lower tool, die block with 4Vs
            - manual table crowning
            - SICK light barrier behind the machine
            - 2 front support arms
            - SIEMENS - electrical system
            - BOSCH / HOERBIGER hydraulic system
            - CE mark / declaration of conformity
            - Operating manual: machine and control
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 4.220


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-830220 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 4.220 - - -

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱column arm 410 mm︱ram stroke speed 180 mm/sec︱return speed 185 mm/sec︱work speed 10,0 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱oil volume 300 ltr.︱table height 900 mm︱voltage 400 Volt︱back stop - adjustable 800 mm︱table width 160 mm︱total power requirement 18,5 kW︱weight 14.000 kg︱range L-W-H 5150 x 2250 x 3000 mm︱
          -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            column arm 410 mm
            ram stroke speed 180 mm/sec
            return speed 185 mm/sec
            work speed 10,0 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            oil volume 300 ltr.
            table height 900 mm
            voltage 400 Volt
            back stop - adjustable 800 mm
            table width 160 mm
            total power requirement 18,5 kW
            weight 14.000 kg
            range L-W-H 5150 x 2250 x 3000 mm
            Description :

            --------------------------------------------------
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            enlarged projection
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touchscreen control unit
            - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split upper deer foot tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Universal die block
            - LEUZE light barrier behind d. machine
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (including FPSC)
            - 2 front support arms with SLIDING system (plain bearings)
            - Double foot operation
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes

            Special equipment including:
            - electrical central lubrication


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 3.135


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308047 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 3.135 - - -

          Technical details
          pressure 135 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 120 mm/sec︱work speed 10,0 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 200 ltr.︱voltage 400 Volt︱total power requirement 11,0 kW︱weight 8.650 kg︱range L-W-H 4.250 x 2.050 x 2.800 mm︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 135 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 120 mm/sec
            work speed 10,0 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 200 ltr.
            voltage 400 Volt
            total power requirement 11,0 kW
            weight 8.650 kg
            range L-W-H 4.250 x 2.050 x 2.800 mm
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA-58T graphic/touch screen
            * 2D graphical programming
            * 15" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK ECO BEND EXPERT 200/3


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8301071 · Hydr. pressbrake

          ERMAK - ECO BEND EXPERT 200/3 - - -

          Technical details
          pressure 200 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 250 mm︱ram stroke speed 100 mm/sec︱return speed 75,0 mm/sec︱work speed 7,0 mm/min︱work stroke 180 mm︱dayligth 415 mm︱oil volume 200 ltr.︱table height 900 mm︱voltage 400 Volt︱range L-W-H 4450x2050x2650 mm︱
          Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes
            pressure 200 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 250 mm
            ram stroke speed 100 mm/sec
            return speed 75,0 mm/sec
            work speed 7,0 mm/min
            work stroke 180 mm
            dayligth 415 mm
            oil volume 200 ltr.
            table height 900 mm
            voltage 400 Volt
            range L-W-H 4450x2050x2650 mm
            Description :
            Furnishing:
            - DELEM - CNC control model DA-58T
            - controlled axes: Y1 - Y2 and X
            - FIESSLER AKAS - laser protection in front of the machine
            - Deer foot upper tool
            - Universal die block
            - manual table crowning
            - Safety device: light barrier behind the machine
            - 2 front support arms
            - SIEMENS - electrical system
            - BOSCH / HOERBIGER hydraulic system
            - CE mark / declaration of conformity
            - Operating manual: machine and control
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 4.135


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308146 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 4.135 - - -

          Technical details
          pressure 135 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 190 mm/sec︱work speed 12,0 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱oil volume 300 ltr.︱table height 900 mm︱voltage 400 Volt︱total power requirement 15,0 kW︱weight 10.800 kg︱range L-W-H 5100 x 2100 x 2850 mm︱
          -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication
            pressure 135 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 190 mm/sec
            work speed 12,0 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            oil volume 300 ltr.
            table height 900 mm
            voltage 400 Volt
            total power requirement 15,0 kW
            weight 10.800 kg
            range L-W-H 5100 x 2100 x 2850 mm
            Description :

            --------------------------------------------------
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            enlarged projection
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touchscreen control unit
            - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split upper deer foot tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Split universal die block M 460 R, including die shoe C 1050-R
            - LEUZE light barrier behind d. machine
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (including FPSC)
            - 2 front support arms with SLIDING system (plain bearings)
            - Double foot operation
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes

            Special equipment including:
            - electrical central lubrication


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 4.175


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8302191 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 4.175 - - -

          Technical details
          pressure 175 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱column arm 410 mm︱ram stroke speed 180 mm/sec︱return speed 190 mm/sec︱work speed 12 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱oil volume 300 ltr.︱table height 900 mm︱voltage 400 Volt︱total power requirement 15,0 kW︱weight 12.100 kg︱range L-W-H 5.100x2.150x2.850 mm︱
          -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 175 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            column arm 410 mm
            ram stroke speed 180 mm/sec
            return speed 190 mm/sec
            work speed 12 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            oil volume 300 ltr.
            table height 900 mm
            voltage 400 Volt
            total power requirement 15,0 kW
            weight 12.100 kg
            range L-W-H 5.100x2.150x2.850 mm
            Description :

            --------------------------------------------------
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            enlarged projection
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touchscreen control unit
            - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split upper deer foot tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Split universal die block M 460 R, including die shoe C 1050-R
            - LEUZE light barrier behind d. machine
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (including FPSC)
            - 2 front support arms with SLIDING system (plain bearings)
            - Double foot operation
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK ECO BEND EXPERT 3.160


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308097 · Hydr. pressbrake

          ERMAK - ECO BEND EXPERT 3.160 - - -

          Technical details
          pressure 160 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 250 mm︱ram stroke speed 90 mm/sec︱return speed 80 mm/sec︱work speed 7,5 mm/sec︱work stroke 160 mm︱dayligth 395 mm︱oil volume 200 ltr.︱table height 900 mm︱back stop - adjustable 800 mm︱voltage 400 Volt︱total power requirement 11,0 kW︱weight 7.524 kg︱range L-W-H 4250x1900x2550 mm︱
          Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes
            pressure 160 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 250 mm
            ram stroke speed 90 mm/sec
            return speed 80 mm/sec
            work speed 7,5 mm/sec
            work stroke 160 mm
            dayligth 395 mm
            oil volume 200 ltr.
            table height 900 mm
            back stop - adjustable 800 mm
            voltage 400 Volt
            total power requirement 11,0 kW
            weight 7.524 kg
            range L-W-H 4250x1900x2550 mm
            Description :
            Furnishing:
            - DELEM CNC control model DA-66T graphic/touch screen
            * 2D graphical programming
            * 17" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            * intuitive, graphical entry of profiles
            * Automatic calculation of features: tool safety zones,
            Press force, bending tolerance, crown setting, stretched
            Length, embossing force, flattening, automatic rounding calculation
            * Radius programming
            * Graphic tool and product library
            * Collision monitoring
            * 3D visualization
            * 1GB memory
            - controlled axes : Y1 - Y2 and X
            - manual table crowning
            - AKAS - laser protection device f. d. machine
            - Upper tool, deer foot
            - Lower tool, die block with 4V's
            - Light barrier behind the machine
            - 2 front support arms
            - SIEMENS - electrical system
            - BOSCH/HOERBIGER hydraulic system
            - CE mark/Declaration of Conformity
            - Operating manual : machine and control
            - Safety manual : press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK MICROBEND 10.40


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308134 · Hydr. pressbrake

          ERMAK - MICROBEND 10.40 - - -

          Technical details
          pressure 40,0 t︱chamfer lenght 1000 mm︱distance between columns 800 mm︱column arm 250 mm︱ram stroke speed 110 mm/sec︱return speed 105 mm/sec︱work speed 11 mm/sec︱work stroke 100 mm︱oil volume 60 ltr.︱table height 800 mm︱table width 90 mm︱voltage 400 Volt︱engine output 4,0 kW︱back stop - adjustable 500 mm︱range L-W-H 2600 x 1950 x 1850 mm︱dayligth 308 mm︱Weight 1850 kg︱
          Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - controlled axes: Y1 - Y2 - X axis - FIESSLER AKAS laser protection device in front of the machine - Back stop with 2x stop fingers and recirculating ball spindles - Quick change punch holder SYSTEM A - Upper deer foot tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS electrical system - LEUZE light barrier behind the machine - BOSCH / HOERBIGER hydraulic system - 2x front support arms "sliding system" - Double foot switch - CE mark / declaration of conformity
            pressure 40,0 t
            chamfer lenght 1000 mm
            distance between columns 800 mm
            column arm 250 mm
            ram stroke speed 110 mm/sec
            return speed 105 mm/sec
            work speed 11 mm/sec
            work stroke 100 mm
            oil volume 60 ltr.
            table height 800 mm
            table width 90 mm
            voltage 400 Volt
            engine output 4,0 kW
            back stop - adjustable 500 mm
            range L-W-H 2600 x 1950 x 1850 mm
            dayligth 308 mm
            Weight 1850 kg
            Description :
            Furnishing:
            - DELEM CNC control model DA-58T graphics / touchscreen
            * 2D graphic programming
            * 15 "high definition color TFT screen
            * Bending sequence calculation
            * Product programming and display in real size
            * USB interface
            - controlled axes: Y1 - Y2 - X axis
            - FIESSLER AKAS laser protection device in front of the machine
            - Back stop with 2x stop fingers and recirculating ball spindles
            - Quick change punch holder SYSTEM A
            - Upper deer foot tool, ground version
            - Universal die block 60x60 mm with 4V in the die shoe
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - BOSCH / HOERBIGER hydraulic system
            - 2x front support arms "sliding system"
            - Double foot switch
            - CE mark / declaration of conformity


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 4.220


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-830310 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 4.220 - - -

          Technical details
          pressure 220 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱column arm 410 mm︱ram stroke speed 180 mm/sec︱return speed 160 mm/sec︱work speed 11,0 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱table height 900 mm︱table width 160 mm︱oil volume 300 ltr.︱voltage 400 Volt︱total power requirement 18,5 kW︱weight 13.800 kg︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 220 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            column arm 410 mm
            ram stroke speed 180 mm/sec
            return speed 160 mm/sec
            work speed 11,0 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            table height 900 mm
            table width 160 mm
            oil volume 300 ltr.
            voltage 400 Volt
            total power requirement 18,5 kW
            weight 13.800 kg
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA-58T graphics / touchscreen
            * 2D graphic programming
            * 15 "high definition color TFT screen
            * Bending sequence calculation
            * Product programming and display in real size
            * USB interface
            - Motorized backgauge with R-axis, on recirculating ball spindles
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
            - Additional crowning device in the tool holder of the upper tool
            - Universal die block
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "sliding system", with T-slot and tilting cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 3.175


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8303219 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 3.175 - - -

          Technical details
          pressure 175 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 410 mm︱ram stroke speed 180 mm/sec︱return speed 135 mm/sec︱work speed 10,0 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 200 ltr.︱voltage 400 Volt︱total power requirement 15,0 kW︱weight 9.450 kg︱range L-W-H 4.250x2.150x2.800 mm︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes
            pressure 175 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 410 mm
            ram stroke speed 180 mm/sec
            return speed 135 mm/sec
            work speed 10,0 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 200 ltr.
            voltage 400 Volt
            total power requirement 15,0 kW
            weight 9.450 kg
            range L-W-H 4.250x2.150x2.800 mm
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA-58T graphic/touch screen
            * 2D graphical programming
            * 15" TFT color screen with high resolution
            * Bending sequence calculation
            * Product programming and real size display
            * USB interface
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp
            - additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm mount
            - BOSCH/HOERBIGER hydr. components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protection device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - Operating manual: Machine and control in German
            - Safety manual : press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 37.220


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308145 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 37.220 - - -

          Technical details
          pressure 220 t︱chamfer lenght 3760 mm︱distance between columns 3250 mm︱column arm 410 mm︱ram stroke speed 180 mm/sec︱return speed 160 mm/sec︱work speed 10,0 mm/sec︱work stroke 275 mm︱dayligth 550 mm︱table height 900 mm︱table width 160 mm︱oil volume 300 ltr.︱voltage 400 Volt︱total power requirement 18,5 kW︱weight 12.906 kg︱range L-W-H 5100 x 2250 x 2900 mm︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 220 t
            chamfer lenght 3760 mm
            distance between columns 3250 mm
            column arm 410 mm
            ram stroke speed 180 mm/sec
            return speed 160 mm/sec
            work speed 10,0 mm/sec
            work stroke 275 mm
            dayligth 550 mm
            table height 900 mm
            table width 160 mm
            oil volume 300 ltr.
            voltage 400 Volt
            total power requirement 18,5 kW
            weight 12.906 kg
            range L-W-H 5100 x 2250 x 2900 mm
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 58T (TouchScreen)
            - Motorized backgauge with R-axis, on recirculating ball spindles
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
            - Additional crowning device in the tool holder of the upper tool
            - Universal die block
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "sliding system", with T-slot and tilting cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND PRO 20.60


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8303217 · Hydr. pressbrake

          ERMAK - POWER BEND PRO 20.60 - - -

          Technical details
          pressure 60 t︱chamfer lenght 2100 mm︱distance between columns 1700 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 165 mm/sec︱work speed 14,0 mm/sec︱work stroke 275 mm︱dayligth 530 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 150 ltr.︱voltage 400 Volt︱total power requirement 7,5 kW︱weight 5640 kg︱range L-W-H 3012x1960x2750 mm︱
          -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 60 t
            chamfer lenght 2100 mm
            distance between columns 1700 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 165 mm/sec
            work speed 14,0 mm/sec
            work stroke 275 mm
            dayligth 530 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 150 ltr.
            voltage 400 Volt
            total power requirement 7,5 kW
            weight 5640 kg
            range L-W-H 3012x1960x2750 mm
            Description :

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 53T (touchscreen)
            - Motorized backgauge with R-axis, on recirculating ball spindles
            - X = 800 mm R = 250 mm with 2 stop fingers
            - controlled axes Y1 - Y2 - X - R - C (crowning)
            - electr. Crowning controlled by CNC
            - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
            - Additional crowning device in the tool holder of the upper tool
            - 4V universal die block M 460 R with die shoe 60 mm holder
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS electrical system
            - LEUZE light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device v.d. machine
            - Swiveling control panel, mounted on the left
            - 2x front support arms "sliding system", with T-slot and tilting cam
            - 1x double foot control
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 3.175


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8302070 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 3.175 - - -

          Technical details
          pressure 175 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 410 mm︱ram stroke speed 180 mm/sec︱return speed 190 mm/sec︱work speed 12,0 mm/min︱work stroke 375 mm︱dayligth 650 mm︱oil volume 300 ltr.︱table height 900 mm︱voltage 400 Volt︱total power requirement 15,0 kW︱weight 9.800 kg︱range L-W-H 4150 x 2150 x 2800 mm︱
          -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes
            pressure 175 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 410 mm
            ram stroke speed 180 mm/sec
            return speed 190 mm/sec
            work speed 12,0 mm/min
            work stroke 375 mm
            dayligth 650 mm
            oil volume 300 ltr.
            table height 900 mm
            voltage 400 Volt
            total power requirement 15,0 kW
            weight 9.800 kg
            range L-W-H 4150 x 2150 x 2800 mm
            Description :

            --------------------------------------------------
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            enlarged projection
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touchscreen control unit
            - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split upper deer foot tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Split universal die block M 460 R, including die shoe C 1050-R
            - LEUZE light barrier behind d. machine
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (including FPSC)
            - 2 front support arms with SLIDING system (plain bearings)
            - Double foot operation
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK SPEED BEND PRO 3.320


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8308143 · Hydr. pressbrake

          ERMAK - SPEED BEND PRO 3.320 - - -

          Technical details
          pressure 320 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 410 mm︱ram stroke speed 140 mm/sec︱return speed 150 mm/sec︱work speed 10,5 mm/sec︱work stroke 375 mm︱dayligth 650 mm︱table height 900 mm︱table width 240 mm︱oil volume 400 ltr.︱voltage 400 Volt︱total power requirement 30,0 kW︱weight 16.925 kg︱Dimensions (HxWxD) 4550 x 2450 x 3200 mm︱
          -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication
            pressure 320 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 410 mm
            ram stroke speed 140 mm/sec
            return speed 150 mm/sec
            work speed 10,5 mm/sec
            work stroke 375 mm
            dayligth 650 mm
            table height 900 mm
            table width 240 mm
            oil volume 400 ltr.
            voltage 400 Volt
            total power requirement 30,0 kW
            weight 16.925 kg
            Dimensions (HxWxD) 4550 x 2450 x 3200 mm
            Description :

            --------------------------------------------------
            HIGH-SPEED hydraulic press brake with
            increased installation height
            increased cylinder stroke
            enlarged projection
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 66T
            - swiveling touchscreen control unit
            - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
            - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm
            - on ball screws
            - controlled electr. Stop fingers Z1 + Z2
            - split upper deer foot tool Roleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Universal die block
            - LEUZE light barrier behind d. machine
            - BOSCH / HOERBIGER hydr. Components
            - SIEMENS - electrical system
            - FIESSLER AKAS laser protection device in front of the machine (including FPSC)
            - 2 front support arms with SLIDING system (plain bearings)
            - Double foot operation
            - CE mark / declaration of conformity
            - User manual: machine and control in German
            - Safety manual: press brakes

            Special equipment including:
            - electrical central lubrication


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.