'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Notching Machine

          used Sheet metal working / shaeres / bending Notching Machine EUROMAC 220/4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92287 · Notching Machine

          EUROMAC - 220/4 - - 1999 -

          Technical details
          plate thickness 3-4 mm︱pressure 0 t︱Cutting length 220 mm︱table height 900 mm︱quantity of oil 35 l︱Table dimensions 950 x 790 mm︱total power requirement 4 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,0 x 0,86 x 1,2 m︱
          Foot switch angle adjustment 30°-140° automatic cutting gap adjustment
            plate thickness 3-4 mm
            Cutting length 220 mm
            table height 900 mm
            quantity of oil 35 l
            Table dimensions 950 x 790 mm
            total power requirement 4 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,0 x 0,86 x 1,2 m
            Description :
            Foot switch
            angle adjustment 30°-140°
            automatic cutting gap adjustment


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine EUROMAC MULTI 220/6 R


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9397094 · Notching Machine

          EUROMAC - MULTI 220/6 R - - 1998 -

          Technical details
          plate thickness 6.5 mm︱thickness at "Niro-steel" 5.0 mm︱angle adjustable from - to 30 - 140 Grad︱no. of strokes ca. 50 Hub/min︱table: 950 x 1030 mm︱blade length 220 x 220 mm︱total power requirement 4.0 kW︱weight 800 kg︱range L-W-H 1100 x 950 x 1280 mm︱
          ** current new price approx. 25.000 euros ** Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations * 1x notching, 1x bending station * including bending tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: * 6.0 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397094
            plate thickness 6.5 mm
            thickness at "Niro-steel" 5.0 mm
            angle adjustable from - to 30 - 140 Grad
            no. of strokes ca. 50 Hub/min
            table: 950 x 1030 mm
            blade length 220 x 220 mm
            total power requirement 4.0 kW
            weight 800 kg
            range L-W-H 1100 x 950 x 1280 mm
            Description :
            ** current new price approx. 25.000 euros
            ** Special price on request

            Furnishing:
            - electro-hydraulic notching machine
            - Multi-functional machine with 2x workstations
            * 1x notching, 1x bending station
            * including bending tools
            - manual angle adjustment 30 - 140 degrees
            * 2x handwheels for angle adjustment
            - large / stable work table
            - 2x angle stop, adjustable
            - automatic cutting gap adjustment
            - freely movable foot switch
            - Connection cable + 16A plug

            - Cutting performance:
            * 6.0 mm to 60° ST
            * 5.0 mm to 60° VA
            * 4.0 mm to 30° ST
            * 3.0 mm to 30° VA

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9397094


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Notching Machine Euromac Multi 220/6


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S359 · Notching Machine

          Euromac - Multi 220/6 - - -

          Technical details
          Knife length 220 mm︱Plate thickness 6 mm︱Varaible angle °︱Machine dimensions (lxwxh) mm︱Machine weight kg︱
          Year of make: 1997 Knife length: 220 mm Plate thickness: 6 mm Variable angle Punch / bending unit capacity: 16 tons
            Knife length 220 mm
            Plate thickness 6 mm
            Description :
            Year of make: 1997
            Knife length: 220 mm
            Plate thickness: 6 mm
            Variable angle
            Punch / bending unit capacity: 16 tons


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Pipe-Bending Machine

          used Sheet metal working / shaeres / bending Pipe-Bending Machine Euromac PB350.S


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BG165 · Pipe-Bending Machine

          Euromac - PB350.S - - -

          Technical details
          capacity in tons - max. 35 t︱tool length - max. 150 mm︱stroke 250 mm︱table width 300 mm︱Machine dimensions (lxwxh) 1.260 x 600 x 1.050 mm︱
          Brand Euromac Machine no BG165 Type PB350.S Capacity 35 T Tool height 150 mm Stroke 250 mm Table width 600 mm Machine size (lxwxh) 1.260 x 600 x 1.050 mm
            capacity in tons - max. 35 t
            tool length - max. 150 mm
            stroke 250 mm
            table width 300 mm
            Machine dimensions (lxwxh) 1.260 x 600 x 1.050 mm
            Description :
            Brand Euromac
            Machine no BG165
            Type PB350.S
            Capacity 35 T
            Tool height 150 mm
            Stroke 250 mm
            Table width 600 mm
            Machine size (lxwxh) 1.260 x 600 x 1.050 mm



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Press Brake - Mechanical

          used Sheet metal working / shaeres / bending Press Brake - Mechanical EUROMAC FX Bend 850/4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-91838 · Press Brake - Mechanical

          EUROMAC - FX Bend 850/4 - - 2017 -

          Technical details
          pressure 20 t︱chamfer lenght 850 mm︱distance between columns 850 mm︱dayligth 470 mm︱y-travel 196 mm︱Y - Axis speed 200 mm/sec.︱x-travel 375 + 400 mm︱X - Axis speed 250 mm/sec.︱z-travel 730 mm︱Z - axis speed 1100 mm/sec.︱R - axys setting range 180 mm︱r -axis speed 600 mm/sec.︱total power requirement 5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 1,6 x 2,0 m︱
          DEMONSTRATION MACHINE Standard accessories: CNC control Panasonic Toughbook incl. USB and WIFI connection Direct drive via servo motor and ball screw safety device incl. dual lasers Monoblock machine frame made of Meehanite (700N/mm² tensile strength) Back gauge with 2 axes CNC controlled Ergonomic design Upper tool clamping system Amada / Promecam Lower tool clamping system Amada / Promecam Special accessories: Backgauge 4-axis CNC controlled X / R / Z1 / Z2 Laser Safe Iris Rapid Bend Hydraulic upper tool clamping system Wila 13mm Hydraulic lower tool clamping system Wila 13mm Remarks: Ergonomic press brake made from a stable monobloc frame (Meehanite cast 700N/mm²) The machine has a direct drive via a servo motor and Ball screw, this screw works on tension to avoid deformation. In addition, the machine is equipped with a 4-axis backgauge, a hydraulic Wila clamping and an Iris Rapid Bend safety device fitted. The machine can be easily transported with a forklift.
            pressure 20 t
            chamfer lenght 850 mm
            distance between columns 850 mm
            dayligth 470 mm
            y-travel 196 mm
            Y - Axis speed 200 mm/sec.
            x-travel 375 + 400 mm
            X - Axis speed 250 mm/sec.
            z-travel 730 mm
            Z - axis speed 1100 mm/sec.
            R - axys setting range 180 mm
            r -axis speed 600 mm/sec.
            total power requirement 5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 1,6 x 2,0 m
            Description :
            DEMONSTRATION MACHINE
            Standard accessories:
            CNC control Panasonic Toughbook incl. USB and WIFI connection
            Direct drive via servo motor and ball screw
            safety device incl. dual lasers
            Monoblock machine frame made of Meehanite (700N/mm² tensile strength)
            Back gauge with 2 axes CNC controlled
            Ergonomic design
            Upper tool clamping system Amada / Promecam
            Lower tool clamping system Amada / Promecam
            Special accessories:
            Backgauge 4-axis CNC controlled X / R / Z1 / Z2
            Laser Safe Iris Rapid Bend
            Hydraulic upper tool clamping system Wila 13mm
            Hydraulic lower tool clamping system Wila 13mm
            Remarks:
            Ergonomic press brake made from a stable monobloc frame
            (Meehanite cast 700N/mm²)
            The machine has a direct drive via a servo motor and
            Ball screw, this screw works on tension to avoid deformation.
            In addition, the machine is equipped with a 4-axis backgauge, a
            hydraulic Wila clamping and an Iris Rapid Bend safety device
            fitted.
            The machine can be easily transported with a forklift.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Press Brake - Mechanical EUROMAC FX BEND 850


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308325 · Press Brake - Mechanical

          EUROMAC - FX BEND 850 - - 2016 -

          Technical details
          pressure 20,0 t︱chamfer lenght 850 mm︱distance between columns 850 mm︱back stop - adjustable 375 + 400 mm︱stroke of upper beam 196 mm︱dayligth 470 mm︱ajustment speed 200 mm/sec︱table height ca. 900 mm︱total power requirement 5,0 kW︱weight of the machine ca. 2500 kg︱dimensions of the machine ca. 1800 x 1600 x 2000 mm︱
          ** New price ~ 85.000 euros ** well-kept / very good condition (!!) ** with electromechanical direct drive (servo motor + ball screws) ** Machine is operated without hydraulic oil Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm * Machine video : https://www.youtube.com/watch?v=foxzKIA7vX8 https://www.youtube.com/watch?v=lCH06VShlHA
            pressure 20,0 t
            chamfer lenght 850 mm
            distance between columns 850 mm
            back stop - adjustable 375 + 400 mm
            stroke of upper beam 196 mm
            dayligth 470 mm
            ajustment speed 200 mm/sec
            table height ca. 900 mm
            total power requirement 5,0 kW
            weight of the machine ca. 2500 kg
            dimensions of the machine ca. 1800 x 1600 x 2000 mm
            Description :
            ** New price ~ 85.000 euros
            ** well-kept / very good condition (!!)
            ** with electromechanical direct drive (servo motor + ball screws)
            ** Machine is operated without hydraulic oil

            Description :
            High performance, fast travel speeds and the best ergonomics
            this bending machine to a perfect tool in terms of productivity and
            Accuracy.

            This allows an unrivaled high productivity in the field of small and
            middle bending parts can be achieved, since even complicated bending sequences
            several stations can be processed very quickly.

            A large number of different and universally divided tools are possible
            an almost unlimited variety of areas of application.

            Furnishing :
            - Stable machine frame for standing and seated operation
            - Deformation-optimized press beam
            - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws)
            - CNC control Panasonic Toughbook incl. USB and WIFI connection
            - CNC controlled axes : Y + X + R + Z1 + Z2
            - CNC control unit in front right, swivelling
            - Inductive length measuring system with temperature compensation
            - Ergonomic machine design
            - AMADA system upper tool holder
            - AMADA system lower tool holder
            - 1x brand new universal tool set (complete)
            - front safety device (DUAL Laser/Iris Rapid Bend)
            - Rear security cover
            - Laterally pivoting protective doors
            - 2x foot switch, for standing and sitting operation
            - Support tables comfort (front)
            - User manual (original)

            * Special accessories included:
            - 4-axis backgauge (axes X+R+Z1+Z2)
            * Speed X axis .. 250 mm/sec
            * Speed R axis .. 600 mm/sec
            * Z axis speed .. 1100 mm/sec
            * Positioning accuracy X axis .. 0.04 mm
            * Positioning accuracy R axis .. 0.06 mm
            * Travel X axis .. 375 + 400 mm
            * Travel R axis .. 180.0 mm

            * Machine video :
            https://www.youtube.com/watch?v=foxzKIA7vX8
            https://www.youtube.com/watch?v=lCH06VShlHA


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact

          Stamping and Punching Machine

          used Sheet metal working / shaeres / bending Stamping and Punching Machine EUROMAC EUROMAC ZX 1000/30


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1920 · Stamping and Punching Machine

          EUROMAC - EUROMAC ZX 1000/30 - - 2001 -

          Technical details
          gebraucht20019647prompt, Zwischenverkauf vItalien32900 €︱ 130 to︱ 1250+N x 1000 mm︱ 1250 mm︱ 1000 mm︱ 40 m/Min︱ 30 m/Min︱ 50 m/Min︱ 30 mm︱ 730 1/Min︱ 300 1/Min︱ 980 mm︱ 4 kW︱ 115 l︱
          With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm
            gebraucht
            2001
            9647
            prompt, Zwischenverkauf v
            Italien
            32900 €
            1
            30 to
            1250+N x 1000 mm
            1250 mm
            1000 mm
            40 m/Min
            30 m/Min
            50 m/Min
            30 mm
            730 1/Min
            300 1/Min
            980 mm
            4 kW
            115 l
            Description :
            With 6-way multitool holder MTE6 (max. Dm. 24 mm)
            2 Clamping claws
            Table with Brushes, table dimension 1970 x 2260 mm
            Foot pedal
            2 pcs. additional single matrix holders
            PC with Euromac Software Eurowin 8.36
            Max. Punching force 300 kN
            Automatic repositioning up to 10.000 mm
            Max. Punching diameter for single tool 88,9 mm,
            Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm
            Max. Opening the clamping claws 7 mm
            Transport width: 2350 mm
            User Manual in english and italian
            CE declaration available

            WITH LARGE TOOL PACKAGE
            several pieces of each of the following dimensions:
            Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23
            Square: 10/12/13/15 mm
            Rectangle: 5x2/20x2/22x4 mm
            Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.