Cut-to-length-lines
Machinelist: Cut-to-length-lines
Cut-to-length-lines
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-056810 · Cut-to-length-lines
VIGANO/RIVA - - - 2000/2001 -
Technical details
sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-19439 · Cut-to-length-lines
HITACHI - - - 1993 -
Technical details
Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
Datasheet
Request / Contact
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-056410 · Cut-to-length-lines
WILHELMSBURGER - - - 1975 -
Technical details
length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
Datasheet
Request / Contact
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-M825 · Cut-to-length-lines
Hydro Meca - 90L4C108H - - -
Technical details
Pipe cutting machine
Folding Machine
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-H1150 · Folding Machine
FASTI - 212-30-4 - - unbekannt -
Technical details
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08500 · Folding Machine
HM Machinery - HBM 3100-65S - - neu -
Technical details
Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Kirchgeorg Werkzeugmaschinen
- Frankfurter Straße 141
- 63303 Dreieich-Sprendlingen
- Deutschland
-
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50 -
info@kirchgeorg.de
www.kirchgeorg.de
#1072-FSBM · Folding Machine
METALLKRAFT - FSBM 1020 - 25 E - - NEU -
Technical details
*** PRICE: 2.045,-- EUR *** - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application
Datasheet
Request / Contact
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6948 · Folding Machine
FALKEN - ERBEND UFA 1015 - - NEU -
Technical details
- Split upper, lower and rear tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual backgauge 500 mm - mobile
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-945437 · Folding Machine
METALLKRAFT - FSBM 1020-20HSG - - NEU -
Technical details
Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4030273 · Folding Machine
BURNET - SBM 2020x1,5 - - Neu -
Technical details
Accessories / equipment: - Machine frame made of welded steel construction - segmented upper tool - motor workpiece clamping - Angle adjustment via handwheel with scale Additional equipment: - Backgauge with manual handwheel
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-7078 · Folding Machine
METALLKRAFT - MSBM 2020-15 C S motorisch - - NEU -
Technical details
Heavy version with motorized drive for the upper and bending beam and segmented upper beam / 3772940 - Foot control enables the sheet metal to be positioned with both hands - The workpiece is clamped and bent using a motorized chain drive - Setting the bending angle manually, reading the angle on a scale ring - Many bending options with segmented upper beam - Exact movement of the bending beam via large flat guides - Heavy, robust welded construction Segment division: 25-30-35-40-45-50-75-100-150-200-200-270-400-400 mm VA steel: 0.8 mm Aluminum: 2.0 mm
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23100 · Folding Machine
RAS - 68.35 - - M.Nr. 155/3 -
Technical details
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08028 · Folding Machine
KAPEMA - KFS 20/20 - - Fabrikneu / new -
Technical details
Segmented top rail for bending box profiles, upper beam clamping hand-operated, manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation. The bending performance refers to 380 N/mm² strength. Warranty = 12 months for single-layer operation. Warranty = 12 months for single-shift operation, this only covers spare parts the defective parts must be returned. The working time costs for The replacement is not covered, nor are the downtimes Machine. Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08413 · Folding Machine
KAPEMA - KFS 10/25 - - fabrikneu -
Technical details
Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08502 · Folding Machine
HM Machinery - MBM 2000 - 20 - - fabrikneu - Beijer
Technical details
Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4030365 · Folding Machine
KRAEMER - 2000 x 2,5 - - ca. 1980 -
Technical details
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-010090 · Folding Machine
HUVEMA - EZB 2020 ES - - 2022 -
Technical details
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-92282 · Folding Machine
HME - HPB 3106 DPV - - 2022 - Simatic touch
Technical details
unused demonstration machine, without guarantee For detailed technical description see PDF
Datasheet
Request / Contact
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-010089 · Folding Machine
HUVEMA - HU 15 ES 1500 - - 2020 -
Technical details
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-010138 · Folding Machine
HUVEMA - HU 2020/2 - - 2020 -
Technical details
Manual folding machine with segmented upper beam, segment size: 25,30,35,40,45,50,75,100,150,200,270, 2 x 400 mm, Height adjustable beams, Adjustable clamping force for thickness of material,
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-010056 · Folding Machine
HUVEMA - HU 20 DS 1020 - - 2020 -
Technical details
• maximum bending angle 135° • hand-operated
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-1262 · Folding Machine
FINTEK - AMH-K 3135 - - 2020 -
Technical details
MINT CONDITION 2 axes CNC control Schneider 7 "touchscreen segmented tool(6x150, 10x125, 5x100, 6x75mm segmented) motorized backgauge 800 mm user manual in GERMAN and English
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-755 · Folding Machine
Unbekannt/Unknown - EASYBEND AM 1025 K - - 2017 -
Technical details
upper beam with sectioned rail booster cylinder user manual in GERMAN and ENGLISH
Datasheet
Request / Contact
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-92331 · Folding Machine
SCHRÖDER - MAK V 2000/2,0 - - 2015 - nano Touch
Technical details
Inclined upper beam 45° with 2-part quick tool clamp Pre-switch off upper beam 15 mm Manual bending beam adjustment 25mm 2-way foot switch manual back gauge 750mm / 7 spring-loaded gauge fingers sharp nose blade 20°/ one-piece 2020mm long lower tool slim 10mm / one-piece 2020mm long lower tool thick 25mm / one-piece 2020mm long Goat's foot blade height 80mm / 2060mm total. length / segmented: Corner piece left 75 - corner piece right 75 30-50-55-60-65-70-75-100-200-200-500-500mm shims Crane suspension hooks are in the control cabinet
Datasheet
Request / Contact
TOP Manufacturer:
VIGANO/RIVA - HYDRO MECA - WILHELMSBURGER - HITACHI -