'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Flanging Machine

          Machinelist: Flanging Machine


          Flanging Machine

          used Sheet metal working / shaeres / bending Flanging Machine SÜDMETALL


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-27058 · Flanging Machine

          SÜDMETALL - - - -

          Technical details
          plate thickness mm︱roll diameter mm︱ ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          for maximum sheet thickness: 0.8 mm
          Fold height adjustable: 35 - 60 mm
          Bjtz29yav2
          4 opening and closing Locking lever
          Drive motor: AC 220 V, 0.8 kW
          Space requirement: 500 x 250 x 380 mm
          Weight: 55 kg
            Description :
            for maximum sheet thickness: 0.8 mm

            Fold height adjustable: 35 - 60 mm

            Bjtz29yav2

            4 opening and closing Locking lever

            Drive motor: AC 220 V, 0.8 kW

            Space requirement: 500 x 250 x 380 mm

            Weight: 55 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging Machine unbekannt -


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-24477 · Flanging Machine

          unbekannt - - - - -

          Technical details
          plate thickness mm︱roll diameter mm︱ ︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Working length approx.: 1000 mm
          for sheet thickness (iron plates) until approx.: 0.4 mm
          Holmen Ø - conical: 50/58 mm
          Drive motor: 380 V, 0,62 kW
          Space requirements: 1450 x 450 x 1580 mm
          Vc8xo
          Weight: 460 kg
            Description :
            Working length approx.: 1000 mm

            for sheet thickness (iron plates) until approx.: 0.4 mm

            Holmen Ø - conical: 50/58 mm

            Drive motor: 380 V, 0,62 kW

            Space requirements: 1450 x 450 x 1580 mm

            Vc8xo

            Weight: 460 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging Machine RAS 21.20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12332 · Flanging Machine

          RAS - 21.20 - - -

          Technical details
          plate thickness 1,5 mm︱roll diameter 76 mm︱bending speed 4,7/9,4 m/min︱total power requirement 0,37/0,55 kW︱weight of the machine ca. 160 kg︱dimensions of the machine ca. 0,6 x 0,6 m︱Electric 380 Volt
          Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².
            plate thickness 1,5 mm
            roll diameter 76 mm
            bending speed 4,7/9,4 m/min
            total power requirement 0,37/0,55 kW
            weight of the machine ca. 160 kg
            dimensions of the machine ca. 0,6 x 0,6 m
            Description :
            Universal flanging machine for raising rectangular shelves on straight,
            round and rectangular sheet metal parts. It has two flaring rollers, which in
            stand at a small angle of inclination to each other. The drive takes place via a
            flange geared motor that regulates two speeds in a pole-reversible manner. As
            a special accessory is an additional device for pressing in the cams for the
            cam standing seam available.
            The bending performance refers to 400 N/mm² strength.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging Machine RAS 11.31


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M707 · Flanging Machine

          RAS - 11.31 - - -

          Technical details
          Capacity 1,25 mm︱Machine weight 49 kg︱Machine dimensions (lxwxh) - mm︱
          Electrically driven Pneumatically driven upper roll Foot pedal Speed variable adjustable with frequency inverter
            Capacity 1,25 mm
            Machine weight 49 kg
            Machine dimensions (lxwxh) - mm
            Description :
            Electrically driven
            Pneumatically driven upper roll
            Foot pedal
            Speed variable adjustable with frequency inverter




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging Machine HESSE by ISITAN SDK 6


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1932 · Flanging Machine

          HESSE by ISITAN - SDK 6 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei50000 €︱ 1015 €︱ 6 mm︱ 4 mm︱ 50 mm︱ 4000 mm︱ 530 mm︱ 4 kW︱ 4250 mm︱ 900 mm︱ 2240 mm︱ 2050 kg︱
          Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. (R25) One set of cutting blades included Min. cutting diameter: 470 mm Min. flanging diameter: 530 mm 2 speed part carrier (7-14 m./min) and one speed rotation cutting system Top and bottom flanging rolls powered in rotation with planetary reducers Manually adjustable sheet centering for both flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            50000 €
            1015 €
            6 mm
            4 mm
            50 mm
            4000 mm
            530 mm
            4 kW
            4250 mm
            900 mm
            2240 mm
            2050 kg
            Description :
            Easy operation with mobile control panel with push buttons
            Built according to EC Safety Directives and has CE Mark
            One set of flanging rolls included. (R25)
            One set of cutting blades included
            Min. cutting diameter: 470 mm
            Min. flanging diameter: 530 mm
            2 speed part carrier (7-14 m./min) and one speed rotation cutting system
            Top and bottom flanging rolls powered in rotation with planetary reducers
            Manually adjustable sheet centering for both flat and crowned dish flanging
            Both cutting and flanging operation on the same head
            Users Manual

            Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Flanging Machine HESSE by SAHINLER SDK 8


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1019 · Flanging Machine

          HESSE by SAHINLER - SDK 8 - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufTürkei92000 €︱ 1849.2 €︱ 8 mm︱ 5 mm︱ 80 mm︱ 10 mm︱ 4500 mm︱ 720 mm︱ 95 (R 80) / 35 (R 25) mm︱ 10 kW︱ 4900 mm︱ 1700 mm︱ 2700 mm︱ 4550 kg︱
          incl. flanging rolls for mild steel (R25) incl. cutting blade hydraulically adjustable carrier from top to bottom cutting and flanging on the same head lateral support rolls Operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            92000 €
            1849.2 €
            8 mm
            5 mm
            80 mm
            10 mm
            4500 mm
            720 mm
            95 (R 80) / 35 (R 25) mm
            10 kW
            4900 mm
            1700 mm
            2700 mm
            4550 kg
            Description :
            incl. flanging rolls for mild steel (R25)
            incl. cutting blade
            hydraulically adjustable carrier from top to bottom
            cutting and flanging on the same head
            lateral support rolls
            Operator panel with touch screen

            Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08037 · Plate Shear - Mechanical

          KAPEMA - SMP 20-20 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 2 mm
            strokes per minute until 38
            cutting angle 1,75 °
            table height over floor 870 mm
            total power requirement 3 kW
            weight of the machine ca. 1520 kg
            range L-W-H 2,2 x 0,6 x 1,2 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 12-30


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08408 · Plate Shear - Mechanical

          KAPEMA - SMP 12-30 - - Fabrikneu / new -

          Technical details
          sheet width 1275 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 3 kW︱weight of the machine ca. 875 kg︱range L-W-H 1,7 x 1,68 x 1,1 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱Piece counter ︱Squaring arm ︱Support arms
          The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².
            sheet width 1275 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 3 kW
            weight of the machine ca. 875 kg
            range L-W-H 1,7 x 1,68 x 1,1 m
            Description :
            The guillotine shears type SMP is a well-dimensioned machine with
            all-welded gate guides. The drive takes place with a standard geared brake
            motor via a chain connection to the main axis. The knives are of the highest
            quality. The optimal cutting angle ensures together with the rubber-coated
            sheet metal holder, perfect cuts.
            Bearings and guides are maintenance-free and lubrication-free.
            Standard equipment: • Back gauge 635 with mm scale. •
            Cutting line lighting. • Section counter. • Table extensions 600 mm. •
            Right-angled stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            rear photocell.
            Pre-freight to our stock + packaging 270, -.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-30


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08417 · Plate Shear - Mechanical

          KAPEMA - SMP 20-30 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 4 kW︱weight of the machine ca. 1550 kg︱range L-W-H 2,5 x 1,57 x 1,21 m︱Electric 380 Volt
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 4 kW
            weight of the machine ca. 1550 kg
            range L-W-H 2,5 x 1,57 x 1,21 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RFR MS/24


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01210 · Plate Shear - Mechanical

          RFR - MS/24 - - ca. 1960 -

          Technical details
          sheet width 2300 mm︱plate thickness 1,5 mm︱distance between columns 2400 mm︱impact length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,5 t︱
            sheet width 2300 mm
            plate thickness 1,5 mm
            distance between columns 2400 mm
            impact length 1000 mm
            weight of the machine ca. 0,5 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RAS 53.60


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-22062 · Plate Shear - Mechanical

          RAS - 53.60 - - 380/6 -

          Technical details
          sheet width 2000 mm︱plate thickness 2,25 mm︱distance between columns 2040 mm︱total power requirement 7,5 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,2x1,7x1,1 m︱
            sheet width 2000 mm
            plate thickness 2,25 mm
            distance between columns 2040 mm
            total power requirement 7,5 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,2x1,7x1,1 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical OSTAS RGM 1550 x 3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75103 · Plate Shear - Mechanical

          OSTAS - RGM 1550 x 3 - - 2022 -

          Technical details
          sheet width 1550 mm︱plate thickness 3 mm︱distance between columns 1600 mm︱back stop - adjustable 600 mm︱connected load 3 kW︱weight of the machine ca. 1,1 t︱dimensions 2,06 x 2,14 x 1,21 m︱
          Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)
            sheet width 1550 mm
            plate thickness 3 mm
            distance between columns 1600 mm
            back stop - adjustable 600 mm
            connected load 3 kW
            weight of the machine ca. 1,1 t
            dimensions 2,06 x 2,14 x 1,21 m
            Description :
            Demonstration machine with small paint damage.
            The machine works quietly and is powered by its geared motor
            Braking system energy-saving.
            Our machine is welded as a monobloc body from ST42 quality material.
            The knives of the machine are of 2379 quality and the brand name is BOHLER.
            These high-quality knives guarantee precise cutting.
            Emergency stop button, foot switch and finger guard are included
            standard equipment.
            (Documentation in English only)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA KGM 1215


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-441 · Plate Shear - Mechanical

          HESSE by DURMA - KGM 1215 - - 2022 -

          Technical details
          gebraucht20229665prompt, Zwischenverkauf vTürkei3500 €︱ 11250 mm︱ 1.5 mm︱ 500 mm︱ 2250 mm︱ 1000 mm︱ 1150 mm︱ 460 kg︱
          DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH
            gebraucht
            2022
            9665
            prompt, Zwischenverkauf v
            Türkei
            3500 €
            1
            1250 mm
            1.5 mm
            500 mm
            2250 mm
            1000 mm
            1150 mm
            460 kg
            Description :
            DEMO MACHINE - MINT CONDITION
            welded steel construction
            with manual hold down unit
            back gauge adjustable by handwheel
            users manual in ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA MS 2004


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1763 · Plate Shear - Mechanical

          HESSE by DURMA - MS 2004 - - 2022 -

          Technical details
          gebraucht20229640prompt, Zwischenverkauf vTürkei21800 €︱ 12050 mm︱ 4 mm︱ 42 1/min︱ 750 mm︱ 7.5 kW︱ 800 mm︱ 450 mm︱ 2700 mm︱ 2300 mm︱ 1350 mm︱ 2800 kg︱
          DEMO MACHINE, MINT CONDITION motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH
            gebraucht
            2022
            9640
            prompt, Zwischenverkauf v
            Türkei
            21800 €
            1
            2050 mm
            4 mm
            42 1/min
            750 mm
            7.5 kW
            800 mm
            450 mm
            2700 mm
            2300 mm
            1350 mm
            2800 kg
            Description :
            DEMO MACHINE, MINT CONDITION
            motorizedback gauge atrecirculating ballscrew with Control DT5
            hold down with rubber pads
            Side Lay with T-Slot
            2 Sheet support arms
            ball in the table
            tape measure
            tilting stop
            light barriers on the back of the machine
            cutting line illumination
            user manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA MS 3004


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-467 · Plate Shear - Mechanical

          HESSE by DURMA - MS 3004 - - 2022 -

          Technical details
          gebraucht20229615prompt, Zwischenverkauf vTürkei24100 €︱ 113100 mm︱ 4 mm︱ 42 1/min︱ 750 mm︱ 7.5 kW︱ 2 Stk.︱ 800 mm︱ 450 mm︱ 3700 mm︱ 2300 mm︱ 1350 mm︱ 3730 kg︱
          DEMO MACHINE - MINT CONDITION mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH
            gebraucht
            2022
            9615
            prompt, Zwischenverkauf v
            Türkei
            24100 €
            1
            1
            3100 mm
            4 mm
            42 1/min
            750 mm
            7.5 kW
            2 Stk.
            800 mm
            450 mm
            3700 mm
            2300 mm
            1350 mm
            3730 kg
            Description :
            DEMO MACHINE - MINT CONDITION
            mot. back gauge with digitalreadout DT 5
            hold down with rubber pads
            side lay with T-sluts
            2 supporting arms
            ball in the table
            tape measure
            tilt stop
            light barriers on the back of the machine
            cutting line illumination
            user manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA KGM 1015


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-439 · Plate Shear - Mechanical

          HESSE by DURMA - KGM 1015 - - 2022 -

          Technical details
          gebraucht20229664prompt, Zwischenverkauf vTürkei3100 €︱ 11020 mm︱ 1.5 mm︱ 500 mm︱ 1950 mm︱ 1000 mm︱ 1150 mm︱ 420 kg︱
          DEMO MACHINE, MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH
            gebraucht
            2022
            9664
            prompt, Zwischenverkauf v
            Türkei
            3100 €
            1
            1020 mm
            1.5 mm
            500 mm
            1950 mm
            1000 mm
            1150 mm
            420 kg
            Description :
            DEMO MACHINE, MINT CONDITION
            welded steel construction
            with manual hold down unit
            back gauge adjustable by handwheel
            users manual in ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical OSTAS RGM 1550 x 3


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1144 · Plate Shear - Mechanical

          OSTAS - RGM 1550 x 3 - - 2019 -

          Technical details
          sheet width 1550 mm︱plate thickness 3 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm︱
          Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting
            sheet width 1550 mm
            plate thickness 3 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm
            Description :
            Producer: OSTAS
            Type: RGM 1050 x 3
            YOM: new

            Max. Shearing Length: 1.050 mm
            Shearing Capacity: 3 mm
            Shearing Angle: 2°30'
            Strokes Per Minute: 35 d/d

            Motor Power: 3 kW
            Table Width: 510 mm
            Table Height: 820 mm
            Rear Gauge Distance: 500 mm
            Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm
            Weight: ca. 1.100 kg


            Additional information:

            • Manual backgauge with 500 mm stroke

            • Squaring arm with T-slot, stopper and ruler

            • Foot pedal

            • Front sheet holding arms

            • Cutting line lighting

            • Protection Cages




            optional:

            • Cutting unit counter
            • Motorised backgauge with 500 mm stroke
            • Backgauge with NC control
            • Pneumatic Sheet Support System
            • Optical security bar
            • 0-180° angle cutting


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical METALLKRAFT FTBS 1050-10


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3320042 · Plate Shear - Mechanical

          METALLKRAFT - FTBS 1050-10 - - 2017 -

          Technical details
          sheet width 1050 mm︱plate thickness 1 mm︱distance between columns 1000 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,16 x 0,93 x 0,73 m︱
            sheet width 1050 mm
            plate thickness 1 mm
            distance between columns 1000 mm
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,16 x 0,93 x 0,73 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94086 · Plate Shear - Mechanical

          DURMA - MS 2504 - - 2012 -

          Technical details
          sheet width 2550 mm︱plate thickness 4,00 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱
          ** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
            sheet width 2550 mm
            plate thickness 4,00 mm
            distance between columns 2600 mm
            back stop - adjustable 750 mm
            no. of strokes 42 Hub/min
            cutting angle 1°30
            table width 450 mm
            table height 800 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3230 kg
            dimensions of the machine ca. 3200 x 2300 x 1350 mm
            Description :
            ** Current new price with special accessories ~ 33.000 euros
            ** from a maintenance workshop / good condition (!!)

            Furnishing:
            - robust / powerful mechanical guillotine shears
            - electric backgauge, with ball screws
            - with DURMA NC control - model D-Touch 7
            * Control unit with touchscreen function
            * 128 MB internal memory (programming possible)
            * Multilingual (English, Turkish, German)
            * INCH/metric conversion
            - manual cutting gap adjustment, from the front
            * analogue display of the material thickness
            - 1x extra long side stop 2.000 mm, with support foot & T-slot
            - 2x support arms
            - Ball casters in the support table
            - free-moving footswitch
            - rear protective device (light barrier)
            - original operating instructions (machine + control)

            Special accessories included :
            - Pneumatic sheet metal holding device, for thin sheet metal blanks
            - 1x extra long side stop, with support foot
            - 1x box with spare knife


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325259 · Plate Shear - Mechanical

          DURMA - MS 2504 - - 2012 -

          Technical details
          sheet width 2550 mm︱plate thickness 4,0 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱
          ** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
            sheet width 2550 mm
            plate thickness 4,0 mm
            distance between columns 2600 mm
            back stop - adjustable 750 mm
            no. of strokes 42 Hub/min
            cutting angle 1°30
            table width 450 mm
            table height 800 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3230 kg
            dimensions of the machine ca. 3200 x 2300 x 1350 mm
            Description :
            ** Current new price with special accessories ~ 33.000 euros
            ** from a maintenance workshop / good condition (!!)

            Furnishing:
            - robust / powerful mechanical guillotine shears
            - electric backgauge, with ball screws
            - with DURMA NC control - model D-Touch 7
            * Control unit with touchscreen function
            * 128 MB internal memory (programming possible)
            * Multilingual (English, Turkish, German)
            * INCH/metric conversion
            - manual cutting gap adjustment, from the front
            * analogue display of the material thickness
            - 1x extra long side stop 2.000 mm, with support foot & T-slot
            - 2x support arms
            - Ball casters in the support table
            - free-moving footswitch
            - rear protective device (light barrier)
            - original operating instructions (machine + control)

            Special accessories included :
            - Pneumatic sheet metal holding device, for thin sheet metal blanks
            - 1x extra long side stop, with support foot
            - 1x box with spare knife


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94167 · Plate Shear - Mechanical

          SCHRÖDER - MHSU 1500/2,0 - - 2009 -

          Technical details
          sheet width 1530 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,840 t︱dimensions of the machine ca. 1,90 x 1,30 x 1,20 m︱
          - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier
            sheet width 1530 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,840 t
            dimensions of the machine ca. 1,90 x 1,30 x 1,20 m
            Description :
            - manual back gauge 500mm
            - Hold-down device with hard rubber strip
            - Sheet metal holding device mechanically controlled to the rear including
            sheet metal slide
            - Rear area protection via light barrier


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011200 · Plate Shear - Mechanical

          DURMA - MS 2504 - - 2009 -

          Technical details
          sheet width 2550 mm︱plate thickness 4 mm︱cutting angle 1 °︱no. of strokes 42 Hub/min︱rear stop 750 ︱table width 450 mm︱table height 800 mm︱weight of the machine ca. 3500 kg︱dimensions of the machine ca. 3200x2300x1400 mm︱
            sheet width 2550 mm
            plate thickness 4 mm
            cutting angle 1 °
            no. of strokes 42 Hub/min
            rear stop 750
            table width 450 mm
            table height 800 mm
            weight of the machine ca. 3500 kg
            dimensions of the machine ca. 3200x2300x1400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHROEDER MHSUV 2000/4,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94125 · Plate Shear - Mechanical

          SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100

          Technical details
          sheet width 2030 mm︱plate thickness 4,00 mm︱thickness at "Niro-steel" 2,50 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱
          ** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades
            sheet width 2030 mm
            plate thickness 4,00 mm
            thickness at "Niro-steel" 2,50 mm
            no. of strokes 34 Hub/min
            cutting angle 2,5 Grad
            table height 820 mm
            distance between columns 2340 mm
            Control POS 100
            back stop - adjustable max. 750 mm
            engine output 6,8 kW
            weight of the machine ca. 2860 kg.
            range L-W-H 2870 x 2070 x 1400 mm
            Description :
            ** Machine from a maintenance workshop
            ** very well maintained condition - hardly used (!!)

            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - Electric back gauge, with SCHRÖDER POS 100 NC control
            * Digital position display from the backgauge
            * adjustable from the front right
            * with target/actual value input
            * Continuous adjustment over the entire travel range
            * Protection of limit values with limit switches
            * 9-fold programming possible
            - "Duo-Cut" drive with two dynamic, powerful geared motors
            - Support table with recessed grips
            - Hold-down bar with hard rubber strip
            - All-steel knife, double-edged
            - 1x side stop, with T-slot and mm scale
            - 2x extended sheet metal support arms, with T-slot and mm scale
            - Selector switch for single and continuous stroke
            - freely movable foot switch
            - Rear safety device
            - original operating instructions + CD Rom

            **Special accessories included:
            - pneumatically controlled sheet metal holding device for thin sheet metal cuts
            * Sheet metal removal / sheet metal slide to the front (operator side)
            - 1x wooden box with replacement scissor blades



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHROEDER MHSUV 2000/4,0


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325303 · Plate Shear - Mechanical

          SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100

          Technical details
          sheet width 2030 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱
          ** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8
            sheet width 2030 mm
            plate thickness 4,0 mm
            thickness at "Niro-steel" 2,5 mm
            no. of strokes 34 Hub/min
            cutting angle 2,5 Grad
            table height 820 mm
            distance between columns 2340 mm
            Control POS 100
            back stop - adjustable max. 750 mm
            engine output 6,8 kW
            weight of the machine ca. 2860 kg.
            range L-W-H 2870 x 2070 x 1400 mm
            Description :
            ** Machine from a maintenance workshop
            ** very well maintained condition - hardly used (!!)

            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - Electric back gauge, with SCHRÖDER POS 100 NC control
            * Digital position display from the backgauge
            * adjustable from the front right
            * with target/actual value input
            * Continuous adjustment over the entire travel range
            * Protection of limit values with limit switches
            * 9-fold programming possible
            - "Duo-Cut" drive with two dynamic, powerful geared motors
            - Support table with recessed grips
            - Hold-down bar with hard rubber strip
            - All-steel knife, double-edged
            - 1x side stop, with T-slot and mm scale
            - 2x extended sheet metal support arms, with T-slot and mm scale
            - Selector switch for single and continuous stroke
            - freely movable foot switch
            - Rear safety device
            - original operating instructions + CD Rom

            **Special accessories included:
            - pneumatically controlled sheet metal holding device for thin sheet metal cuts
            * Sheet metal removal / sheet metal slide to the front (operator side)
            - 1x wooden box with replacement scissor blades

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303

            * Machinevideo :
            https://www.youtube.com/watch?v=5w-LdgCg6J8


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •