'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT MULTICUT 10-30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94137 · Plate Shear - Hydraulic

          EHT - MULTICUT 10-30 - - 2003 -

          Technical details
          sheet width 3050 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱
          ** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale
            sheet width 3050 mm
            plate thickness 10,00 mm
            thickness at "Niro-steel" 6,00 mm
            cutting angle adjustment 0,5 - 2,5 °
            cutting gap adjustment 0,05 - 1,0 mm
            back stop - adjustable 10 - 1000 mm
            adjustment speed 180 mm/s
            down holder 14 Stück
            strokes per minute 12 - 25
            oil volume 300 Liter
            0 max. 300 bar
            voltage 400 V
            main drive 18,5 kW
            weight of the machine ca. 10.000 kg.
            dimensions of the machine ca. 4080 x 2350 x 2060 mm
            Description :
            ** maintained condition (!!)
            ** was serviced annually by the manufacturer TRUMPF / EHT

            Furnishing:
            - Baffle-guided metal sheet shears with automatic cutting angle adjustment
            - Machine frame is an all-steel welded construction
            * Side stands are connected to the machine table
            - EHT / ELGO CNC control model P-9724, front left control panel
            * for backgauge adjustment and program selection (4 axes)
            - Automatic cutting angle adjustment
            - Automatic cutting gap adjustment
            - Automatic cutting gap compensation
            - Support table with ball rollers
            * There are recessed grips between the table sheets
            - front, hinged finger protection
            - hydraulically acting sheet metal hold-down devices
            - rear protective device (protective grille + light barriers)
            - 1x freely movable foot switch
            - original operating instructions

            **Special accessories included:
            - 1x EHT extra long side stop with mm scale & feet
            - 1x EHT extra long support arm with mm scale & feet
            - 2x EHT additional support arms with mm scale




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT MULTICUT 10-30


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325292 · Plate Shear - Hydraulic

          EHT - MULTICUT 10-30 - - 2003 -

          Technical details
          sheet width 3050 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱
          ** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292
            sheet width 3050 mm
            plate thickness 10,0 mm
            thickness at "Niro-steel" 6,0 mm
            cutting angle adjustment 0,5 - 2,5 °
            cutting gap adjustment 0,05 - 1,0 mm
            back stop - adjustable 10 - 1000 mm
            adjustment speed 180 mm/s
            down holder 14 Stück
            strokes per minute 12 - 25
            oil volume 300 Liter
            0 max. 300 bar
            voltage 400 V
            main drive 18,5 kW
            weight of the machine ca. 10.000 kg.
            dimensions of the machine ca. 4080 x 2350 x 2060 mm
            Description :
            ** maintained condition (!!)
            ** was serviced annually by the manufacturer TRUMPF / EHT

            Furnishing:
            - Baffle-guided metal sheet shears with automatic cutting angle adjustment
            - Machine frame is an all-steel welded construction
            * Side stands are connected to the machine table
            - EHT / ELGO CNC control model P-9724, front left control panel
            * for backgauge adjustment and program selection (4 axes)
            - Automatic cutting angle adjustment
            - Automatic cutting gap adjustment
            - Automatic cutting gap compensation
            - Support table with ball rollers
            * There are recessed grips between the table sheets
            - front, hinged finger protection
            - hydraulically acting sheet metal hold-down devices
            - rear protective device (protective grille + light barriers)
            - 1x freely movable foot switch
            - original operating instructions

            **Special accessories included:
            - 1x EHT extra long side stop with mm scale & feet
            - 1x EHT extra long support arm with mm scale & feet
            - 2x EHT additional support arms with mm scale

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT EcoCut 16-31


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011159 · Plate Shear - Hydraulic

          EHT - EcoCut 16-31 - - 1997 -

          Technical details
          sheet width 3050 mm︱plate thickness 16 mm︱cutting angle 1-4 °︱quantity of oil 400 l︱connected load 24 kW︱dimensions 4400x2300x2200 mm︱weight 9200 kg︱
            sheet width 3050 mm
            plate thickness 16 mm
            cutting angle 1-4 °
            quantity of oil 400 l
            connected load 24 kW
            dimensions 4400x2300x2200 mm
            weight 9200 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 6-60


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03644 · Plate Shear - Hydraulic

          EHT - TSS 6-60 - - 1995 - Elgo 87 P2

          Technical details
          sheet width 6000 mm︱plate thickness 6 mm︱distance between columns 610 mm︱Control Elgo 87 P2︱total power requirement 15 kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. m︱
            sheet width 6000 mm
            plate thickness 6 mm
            distance between columns 610 mm
            Control Elgo 87 P2
            total power requirement 15 kW
            weight of the machine ca. 22 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 20-25


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A2025 · Plate Shear - Hydraulic

          EHT - TSS 20-25 - - 1994 -

          Technical details
          sheet width / mm︱plate thickness / mm︱distance between columns / mm︱
          Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment
            sheet width / mm
            plate thickness / mm
            distance between columns / mm
            Description :
            Manufacturer: EHT
            Type: TSS 20-25
            Year of construction: 1994
            Max. Cutting length: 2250 mm
            Max. Sheet thickness: 20 mm
            Strip width min / max: 10/1000 mm
            Distance between the consoles: 2530
            Height above the ground: 900 mm
            Table length without extension arms: 3030 mm
            Oil volume: 800 l
            Max. Pressure: 280 bar
            Operating voltage: 400V
            Control voltage: 230 V.
            Nominal current: 87 A.
            Weight: 15.8 to
            Dimensions L x W x H: 3500 x 2500 x 2400 mm

            Accessories / special equipment
            Pneumatic cutting gap adjustment
            Cutting length limitation
            Roller conveyor elevation bracket
            Hand protection 1 bay
            Multitron control Multitron PS 80; ELCO 85 P
            Lower knife height adjustment



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 4-15


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011100 · Plate Shear - Hydraulic

          EHT - TSS 4-15 - - 1984 -

          Technical details
          sheet width 1500 mm︱plate thickness 4 mm︱back stop - adjustable 10-1000 mm︱no. of strokes ca. 20 Hub/min︱cutting angle 1 °︱table height 850 mm︱total power requirement 8 kW︱weight of the machine ca. 3300 kg︱dimensions of the machine ca. 2500x2000x2000 mm︱
            sheet width 1500 mm
            plate thickness 4 mm
            back stop - adjustable 10-1000 mm
            no. of strokes ca. 20 Hub/min
            cutting angle 1 °
            table height 850 mm
            total power requirement 8 kW
            weight of the machine ca. 3300 kg
            dimensions of the machine ca. 2500x2000x2000 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 10-31


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011211 · Plate Shear - Hydraulic

          EHT - TSS 10-31 - - 1984 -

          Technical details
          sheet width 3000 mm︱plate thickness 10 mm︱
            sheet width 3000 mm
            plate thickness 10 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 6-31


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011147 · Plate Shear - Hydraulic

          EHT - TSS 6-31 - - 1977 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱weight 7000 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            weight 7000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 16 - 20


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18188 · Plate Shear - Hydraulic

          EHT - TSS 16 - 20 - - 1971 -

          Technical details
          sheet width 2000 mm︱plate thickness 16 bei St 42 mm︱passage width 2250 mm︱impact length 1000 mm︱blade length 2005 mm︱throat 600 mm︱cutting gap adjustment 0,05 - 0,95 mm︱cutting angle 1° 40' °︱down holder 10 Stück︱back stop - adjustable 10 - 1000 mm︱table: 2500 x 700 ︱table height over floor 800 mm︱quantity of oil 900 l︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3 x 2,3 x 2,3 m︱voltage 380 V︱
          Food switch, material support beams, spare knifes.
            sheet width 2000 mm
            plate thickness 16 bei St 42 mm
            passage width 2250 mm
            impact length 1000 mm
            blade length 2005 mm
            throat 600 mm
            cutting gap adjustment 0,05 - 0,95 mm
            cutting angle 1° 40' °
            down holder 10 Stück
            back stop - adjustable 10 - 1000 mm
            table: 2500 x 700
            table height over floor 800 mm
            quantity of oil 900 l
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3 x 2,3 x 2,3 m
            voltage 380 V
            Description :
            Food switch, material support beams, spare knifes.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 6-50


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3474 · Plate Shear - Hydraulic

          EHT - TSS 6-50 - - 1970 -

          Technical details
          sheet width 5000 mm︱plate thickness 6 mm︱distance between columns 5030 mm︱throat 340 mm︱weight of the machine ca. 14 t︱dimensions of the machine ca. 5500 x 2250 x 2200 mm︱
            sheet width 5000 mm
            plate thickness 6 mm
            distance between columns 5030 mm
            throat 340 mm
            weight of the machine ca. 14 t
            dimensions of the machine ca. 5500 x 2250 x 2200 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Hydraulic Plate Shear from LagerMaschinen.de
          Hydraulic plate shear from LagerMaschinen - a good choice

          When purchasing a hydraulic plate shear it’s important to gauge the precision of the machine. Luckily LagerMaschinen's experts are well-versed in machine calibration and precision gears. The hydraulic plate shear used for slicing large boards among many different materials absolutely exacts precision for its various tasks. By purchasing your used machine namely a hydraulic plate shear from LagerMaschinen you ensure 100% quality as well as safety. LagerMaschinen's custom installation service will provide your staff with all needed information. Get started today!

          LagerMaschinen.de's hydraulic plate shear

          By buying your used hydraulic plate shear from LagerMaschinen.de you ensure not only a wiser financial decision for your small business but you also increase your professional network. Using the LagerMaschinen platform you can interact with sellers of every machine available including the hydraulic plate shear thereby obtaining their advice or guidance most often in your geographical area. Your hydraulic plate shear from LagerMaschinen is therefore not only an investment in your business but possibly an investment in your professional network.

          Hydraulic plate shear - built to last

          The hydraulic plate shear especially when bought used needs special care. By interacting with both LagerMaschinen.de's sellers and with LagerMaschinen experts themselves you gain knowledge as well as a new business contact along the way. Additionally take advantage of LagerMaschinens.de's delivery and installation service including a demonstration of your new - but used - machine. By purchasing your hydraulic plate shear through LagerMaschinen you'll simply add to the list of clients who love this service. Join today and start searching for the perfect machine.