Plate Shear - Hydraulic

sheet width 2050 mm︱plate thickness 3,0 mm max.︱roll length 2050 mm︱roll diam. toproll 130 mm︱bending speed 3,0 m/min︱total power requirement 2,2 kW︱weight 1530 kg︱range L-W-H 3220 x 1200 x 900 mm︱

---

** very good condition (!!) ** current new price ~ 17.000 euros Furnishing: - Electrically driven top and bottom rollers - swing-out top roller, with folding bearing - asymmetrical roller arrangement - manual delivery of the bottom roller, by hand wheel - self-braking main motor - Profile inlets in the rollers - Safety line - free-moving footswitch Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for rear roller

sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending 4,0 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱

---

** New price ~ 45.000 euros ** from a maintenance workshop ** rarely used (!!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions

sheet width 2030 mm︱plate thickness 1,0 mm︱roll length 2050 mm︱roll diameter Ø 95,0 mm︱work height max. 950 mm︱engine output 1,0 kW︱weight 275 kg︱range L-W-H 2700 x 700 x 1160 mm︱

---

Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401257

sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending 4,0 mm︱diameter of upper rolls 160 mm︱diameter of lower rolls 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 3.000 kg︱dimensions of the machine ca. 3500 x 1500 x 1300 mm︱

---

** New price ~ 48.000 euros ** from a repair workshop - good condition (!) Furnishing: - hydraulic 3-roller bending machine - with conical bending device * Inclination of the bottom roller and the side rollers * Alignment in parallelism in each side roller position * Hardened stop roller * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive of the upper and lower roller (planetary gear) - Parallelism of the side rollers via torsion shafts - Permanent lubrication of all bearings - Security device - Bed. Instructions

sheet width 2050 mm︱plate thickness 6,0 mm︱pre-bending capacity 4,0 mm︱upper roll diameter 200 mm︱lower roll diameter 180 mm︱bending speed 5,2 m/min︱diameter ca. 280 mm︱work height max. 980 mm︱total power requirement 5,5 kW︱weight of the machine ca. 3500 kg.︱range L-W-H 2900 x 1200 x 1280 mm︱

---

Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401255

sheet width 2520 mm︱plate thickness 15.0 mm︱pre-bending capacity 12.0 mm︱upper roll diameter Ø 295 mm︱lower roll diameter Ø 295 mm︱bending speed 5.2 m/min︱work height max. 1200 mm︱total power requirement 15.0 kW︱weight of the machine ca. 10900 kg.︱range L-W-H 3250 x 2100 x 1700 mm︱

---

Furnishing: - robust electro-hydraulic 3-roller round bending machine - electro-hydraulic folding storage for removing closed pipes - swiveling control unit, front right - Machine is designed for cone bending with parallel rollers * max. bending strength at 2.500 mm .. 7.0 mm steel - electro-hydraulic delivery rollers - electro-hydraulic rotating/rolling movement - Digital position display of the rollers - hardened rollers SAE 1050 CK 45 - Connection cable + plug - original instruction manual + plans * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401271

sheet width 2000 mm︱plate thickness 8,0 mm max.︱plate thickness 8,0 mm anbiegen︱roll diam. toproll 240 mm︱roll diam. bottom roll 240 mm︱side roll diameter 240 mm︱work height max. ca. 1100 mm︱work speed 6,5 m/min︱plate width bei 250 mm︱plate thickness 16,0 mm︱voltage 400 V︱total power requirement 11,0 kW︱weight 4910 kg︱range L-W-H 4000 x 1300 x 1600 mm︱

---

Furnishing: - robust 3-roller round bending machine * with asymmetrical roller arrangement - freely movable operation - analogue position display for rollers (scale) - firmly mounted top roller - manual delivery of the bottom roller, using handwheels with scales - electrically adjustable side roller * An inclination is possible by pressing out a coupling * Inclined position for bending conical tubes * Adjustment is via a geared motor - driven upper and lower rollers * Side roller runs as a drag roller - original operating instructions + machine card ** Performance table SRMASY V-28: - Sheet width 2,000 mm .. 8.0 mm ST - Sheet width 1,500 mm .. 8.2 mm ST - Sheet width 1,000 mm .. 9.2 mm ST - Sheet width 750 mm .. 10.2 mm ST - Sheet width 500 mm .. 12.0 mm ST - Sheet width 250 mm .. 16.0 mm ST

sheet width 1270 mm︱plate thickness 1,50 mm︱roll length 1270 mm︱roll diam. toproll 75,0 mm︱engine output manuell kW︱weight 330 kg︱range L-W-H 2150 x 700 x 1160 mm︱

---

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm

sheet width 1550 mm︱plate thickness 2,0 mm︱roll length 1550 mm︱roll diam. toproll 90,0 mm︱engine output manuell kW︱weight 560 kg︱range L-W-H 2580 x 700 x 1250 mm︱

---

Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm

sheet width 1270 mm︱plate thickness 2,5 mm︱roll length 1270 mm︱roll diam. toproll 90,0 mm︱engine output 1,1 kW︱bending speed 6,0 m/min︱weight 520 kg︱

---

Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device

sheet width 1050 mm︱plate thickness 1,50 mm︱roll length 1050 mm︱roll diam. toproll 68,0 mm︱engine output manuell kW︱weight 280 kg︱range L-W-H 1930 x 700 x 1160 mm︱

---

Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm

sheet width 1250 mm︱plate thickness 5,5 mm︱pre-bending 5,0 mm︱roll diam. toproll 140 mm︱min. dia. 210 mm︱engine output 2,2 kW︱turning speeds 5,7 U/min︱weight 1365 kg︱range L-W-H 2.020 x 900 x 1.200 mm︱

---

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

sheet width 1050 mm︱plate thickness 1.50 mm︱pre-bending 1.25 mm︱diameter of upper rolls 65.0 mm︱diameter of lower rolls 65.0 mm︱side roll diameter 65.0 mm︱speed ca. 6,0 m/min︱voltage 400 V︱total power requirement 0.8 kW︱weight of the machine ca. 455 kg︱range L-W-H 1500 x 700 x 1230 mm︱

---

Furnishing: - electro-mechanical three-roll round bending machine - robust electric drive * STROMAG BZFM 63 drive motor - asymmetrical roller arrangement - manual delivery of the side roller - manual delivery of the bottom roller - swing-out top roller - freely movable double foot switch * Right/left rotation of the rollers - side control cabinet * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401269

sheet width 1050 mm︱plate thickness 3,3 mm︱pre-bending 3,0 mm︱roll length 1050 mm︱roll diameter 90,0 mm︱min. dia. 130,0 mm︱engine output 1,1 kW︱weight 570 kg︱range L-W-H 1.800 x 800 x 1.130 mm︱

---

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

sheet width 2050 mm︱plate thickness 4,5 mm max.︱plate thickness 4,0 mm anbiegen︱roll length 2050 mm︱min. dia. 210 mm︱roll diam. toproll 140 mm︱weight 1530 kg︱range L-W-H 3220 x 1200 x 900 mm︱

---

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

sheet width 1550 mm︱plate thickness 4,5 mm︱pre-bending 4,0 mm︱roll length 1550 mm︱min. dia. 190 mm︱roll diam. toproll 130 mm︱bending speed 5,3 m/min︱engine output 2,2 kW︱weight 1360 kg︱range L-W-H 2320 x 900 x 1200 mm︱

---

Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

sheet width 2040 mm︱plate thickness 2.5 mm︱pre-bending 2.0 mm︱diameter of upper rolls 110 mm︱side roll diameter 110 mm︱diameter of lower rolls 110 mm︱speed 6.0 m/min︱voltage 400 V︱total power requirement 1.5 kW︱weight of the machine ca. 1250 kg︱range L-W-H 3020 x 670 x 1010 mm︱

---

Furnishing: - robust electro-mechanical three-roller drive - Driven by spur gear brake motor + countershaft - asymmetrical roller arrangement - electrical delivery of the rear roller * with automatic electrical switch-off * Setting min./max. travel distance possible - Rotatable control panel, front right - swing-out top roller, with folding bearing - Conical bending device - freely movable double foot switch * Right/left rotation of the rollers - Manual delivery of the bottom roller using a handwheel * with analogue position display - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9401265

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱cutting angle 2,0 °︱no. of strokes 15 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱

---

** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱down holder 14 Stück︱no. of strokes 20 Hub/min︱cutting angle 1.2 °︱control CYBTOUCH 6 ︱work height max. 800 mm︱oil volume 150 ltr.︱total power requirement 11.0 kW︱weight 7060 kg︱range L-W-H 4000 x 2410 x 1610 mm︱

---

** well maintained condition (!!) ** current new price approx. 42.000 euros ** Special price on request -------------------------------------------------- Robust electro-hydraulic CNC swing cutting shears * including CYBELEC CNC touch screen control * including CNC electro-hydraulic cutting gap adjustment -------------------------------------------------- Furnishing: - CNC electro-hydraulic swing cutting shear - including CYBELEC CNC touch screen controller, model “CybTouch 6” - some functions of the CNC control: * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material selection, including sheet thickness * Cutting line lighting (cutting on outline) .. and many more - motorized back gauge, travel = 5.0 - 1.000 mm (X axis) * on ball screws * Automatically folds up at maximum travel distance, for longer cuts * including retraction function selectable ("swing-away function") * Positioning accuracy 0.10 mm * Travel speed 80 mm/sec. - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - hinged finger protection, with safety switch * Finger protection with viewing windows for cutting after cracking - Section line lighting with silhouette - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - freely movable foot switch - CE mark/declaration of conformity - Operating instructions + circuit diagram + hydraulic diagram * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325339

sheet width 3100 mm︱plate thickness 10.0 mm︱thickness at "Niro-steel" 6.0 mm︱cutting angle 2.0 °︱down holder 14 Stück︱no. of strokes 13 - 18 Hub/min︱back stop - adjustable 1000 mm︱Control ELGO P40T ︱column arm 250 mm︱oil volume 265 l︱engine output 22,0 kW︱weight 9600 kg︱range L-W-H 4700 x 2300 x 2200 mm︱

---

** New price from 56.000 euros ** Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325300

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱no. of strokes 15 Hub/min︱cutting angle 2,0 °︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱

---

** well-maintained / like new condition (!!) ** New price ~ 45.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325340

sheet width 3100 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱no. of strokes 13 Hub/min︱cutting angle 1°50 ︱control ENC 100M ︱table width 580 mm︱throat 50,0 mm︱total power requirement 22,0 KW︱weight 9300 kg︱range L-W-H 4200 x 2250 x 2100 mm︱

---

** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱cutting angle 1° 30 ︱no. of strokes 15 Hub/min︱control ENC 100 ︱table width 500 mm︱throat 50.0 mm︱Number of working hours 912 h︱total power requirement 15.0 KW︱weight 7650 kg︱range L-W-H 3810 x 2200 x 2050 mm︱

---

** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330

sheet width 3060 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱

---

Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325