Mandrel tube bending machine

Machinelist: Mandrel tube bending machine

Mandrel tube bending machine

Heinz Sanders GmbH
Fresenburger Weg 4
49779 Niederlangen
Deutschland

+49 (0) 5939 9406 40
+49 (0) 5939 9406 50
maschinen@heinz-sanders.de
www.heinz-sanders.de

#1125-6387 · Mandrel tube bending machine

ERCOLINA - Mega Bender 030 / Top 030 - - 2014 -

Technical details

tube diameter 60 mm︱wall strength 3 mm︱bending radius min. 2 x Rohr-Ø ÷ R200 mm︱bending angle 0 - 180 °︱gas tube pipelines 2" (60.,3mm) mm︱speed stufenlos 0,5 - 2,0 ︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱

- Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

tube diameter 60 mm

wall strength 3 mm

bending radius min. 2 x Rohr-Ø ÷ R200 mm

bending angle 0 - 180 °

gas tube pipelines 2" (60.,3mm) mm

speed stufenlos 0,5 - 2,0

total power requirement 1,5 kW

weight of the machine ca. 0,7 t

Description :

- Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic
design (6000 mm pipe slide length)
- Electromechanical drive of the bending axis
- hydraulic clamping
- mandrel feed / extract
- 30 programs x 9 bending angle + correction angle

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS

Plum & Partner Werkzeugmaschinen GmbH
Winkelstraße 32
32257 Bünde
Deutschland

+49 05223 574444
+49 5223188330
info@plum-maschinen.de
www.plum-maschinen.de

#1082-12117 · Mandrel tube bending machine

TRANSFLUID - DB 628 ST / SPS - - 1996 - IPU 20

Technical details

tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website. ︱

Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

tube diameter 6 - 28 mm

wall strength 2 mm

bending radius min. 2 x D

Control IPU 20

bending radius max. 5,0 x D mm

bending angle max. 190 °

arbor length 3000 mm

operating pressure 180 bar

hydraulic motor 4 kW

weight of the machine ca. 900 kg

dimensions of the machine ca. 3,8 x 1,1 x 1,3 m

Bending segments 15-20-26-28 mm

Bending mandrels 4

Operation panel 0,5 x 0,6 x 1,03 m

Description :

Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
20 angles and display in the control panel for bending angle specification,
angle detection and angle measurement via absolute value encoder, autom. tool
plate reset, Turning device with digital display, hydr. quick chuck, aut.
Mandrel lubrication, adjustable length stops.
Operating modes: MANUAL and semi-automatic.
Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
clamp forward / backward, mandrel forward / backward, bending forward /
backward /, locking forward / backward, mandrel lubrication, turning device
forward / backward, plate reset, length stop forward, emergency stop.
The machine comes from a prototype construction and was only used a little
until 2000. After that, the machines of this department were sold. However, the
purchaser did not use the pipe bending machine and therefore it has only stood
in the warehouse and has not worked since then.
Please notice that the price of a new machine today is over € 60.000,--.
Machine dealer with own stock of 1600 m².

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ CNC 25 MR

Markus Hirsch GmbH
Hüttenstrasse 1
46284 Dorsten
Deutschland

+49 2362 95035 12
+49 2362 95035 10
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-02675 · Mandrel tube bending machine

SCHWARZE-WIRTZ - CNC 25 MR - - 1994 -

Technical details

tube diameter 25 mm︱wall strength 2 mm︱bending radius min. 10 mm︱Control ︱bending radius max. 75 mm︱total power requirement 11 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. m︱

tube diameter 25 mm

wall strength 2 mm

bending radius min. 10 mm

bending radius max. 75 mm

total power requirement 11 kW

weight of the machine ca. 1,45 t

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ PERFEKT WE 40 D

Hans Klein Werkzeugmaschinenhandel GmbH
Im Mühlgut 2-4
77815 Bühl
Deutschland

0049 (0) 7223 9617-0
0049 (0) 7223 58512
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de

#1052-01220 · Mandrel tube bending machine

SCHWARZE-WIRTZ - PERFEKT WE 40 D - - 1977 -

Technical details

tube diameter max. 38 mm︱wall strength 2 mm︱bar material dia. min. 10 mm︱bending radius min. 35 mm︱bending radius max. 150 mm︱pull up length of tube 4500 mm︱bending angle max. 180 °︱accuracy of bending angle ± 0,2 °︱total power requirement 7,5 kW︱weight of the machine ca. 1,2 t︱dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m︱

- with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm

tube diameter max. 38 mm

wall strength 2 mm

bar material dia. min. 10 mm

bending radius min. 35 mm

bending radius max. 150 mm

pull up length of tube 4500 mm

bending angle max. 180 °

accuracy of bending angle ± 0,2 °

total power requirement 7,5 kW

weight of the machine ca. 1,2 t

dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m

Description :

- with 8-pos. bending angle pre-selection
- crawler gear control
- positioning device by hand
- tube twist device

Following bending tools are with the machine:
- ø 10 mm, radius 27,5 mm
- ø 12 mm, radius 35 mm
- ø 12 mm, radius 56 mm
- ø 15 mm, radius 35 mm
- ø 15 mm, radius 57,5 mm
- ø 18 mm, radius 35 mm
- ø 18 mm, radius 59 mm

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Topbender TB 050 PT A3/H48

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-969 · Mandrel tube bending machine

ERCOLINA - Topbender TB 050 PT A3/H48 - - -

Technical details

neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 29300 €︱ 594.79 €︱ 50 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 430 kg︱ 6 cm³︱ 50 x 3,31 mm︱ Ø 1”1/4 mm︱ Ø 50 x 2,5 mm︱ 40 x 40 x 4 mm︱ 25 x 50 x 6 mm︱ 50 x 25 x 2,7 mm︱ 60 mm︱ 200 mm︱ 20 mm︱

With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request

neu

ca. 12 - 14 Wochen ab Auf

Italien

29300 €

594.79 €

50 mm

4000 mm

950 mm

1250 mm

430 kg

6 cm³

50 x 3,31 mm

Ø 1”1/4 mm

Ø 50 x 2,5 mm

40 x 40 x 4 mm

25 x 50 x 6 mm

50 x 25 x 2,7 mm

60 mm

200 mm

20 mm

Description :

With mandrel 3 m length
Can be used with or withoud mandrel
Two bending speeds
Programmable bend sequencing and mandrel retraction
Independent clamp and pressure die adjustment
Micrometer wiper die adjustment
Auxiliary system for stabilizing the hydraulic slide pressure
Quick tool change system
With pneumatic material clamping and DRO system for linear and rotational positioning

ALTERNATIVELY:
model with mandrel 6 m length price on request

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Ercobender EB76 CNC V7S

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-1081 · Mandrel tube bending machine

ERCOLINA - Ercobender EB76 CNC V7S - - -

Technical details

neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 121200 €︱ 2411.88 €︱ 76 mm︱ 5700 mm︱ 1100 mm︱ 1550 mm︱ 2700 kg︱ 25 cm³︱ 76,1 x 6,8 mm︱ 2”1/2 mm︱ 76,2 x 3,8 mm︱ 63,5 x 63,5 x 5,6 mm︱ 70 x 50 x 8 mm︱ 70 x 50 x 6 mm︱ 79 mm︱ 250 mm︱ 20 mm︱

FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST

neu

ca. 12 - 14 Wochen ab Auf

Italien

121200 €

2411.88 €

76 mm

5700 mm

1100 mm

1550 mm

2700 kg

25 cm³

76,1 x 6,8 mm

2”1/2 mm

76,2 x 3,8 mm

63,5 x 63,5 x 5,6 mm

70 x 50 x 8 mm

70 x 50 x 6 mm

79 mm

250 mm

20 mm

Description :

FST clamping system (Patented)
6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis),
bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis)
and hydraulic mandrel movement (Y3)
Touch screen control with 3D display of the tube
Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment
Importing files in iges and dxf format (optional)
Integrated Wi-Fi

FURTHER MANDREL LENGTHS ON REQUEST

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA TB80-A/P80NC-4

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-2040 · Mandrel tube bending machine

ERCOLINA - TB80-A/P80NC-4 - - -

Technical details

neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 64000 €︱ 1286.4 €︱ 76 mm︱ 4535 mm︱ 1145 mm︱ 1400 mm︱ 1488 kg︱ 18 cm³︱ 76 x 3,6 mm︱ 76 x 2,3 mm︱ 70x70x3 mm︱ 70x50x3 mm︱ 70x50x6 mm︱ 76 mm︱ 200 mm︱ 10 mm︱ 195 °︱

Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI)

neu

ca. 12 - 14 Wochen ab Auf

Italien

64000 €

1286.4 €

76 mm

4535 mm

1145 mm

1400 mm

1488 kg

18 cm³

76 x 3,6 mm

76 x 2,3 mm

70x70x3 mm

70x50x3 mm

70x50x6 mm

76 mm

200 mm

10 mm

195 °

Description :

Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C)

New TCPlus control
• 7” colour touch screen
• Icons for ease use
• Automatic mode, manual mode, programming mode
• Advanced OFFSET function
• Easy language change
• Auto-tuning of the main machine components
• Programmable bending speed for each single bend of
the program
• Unlimited programs possibility (USB port)
• Every program can contain up to 30 different bends
• Available extensions of 2 meters each (optional)
• Tie bar (optional - art. TB80-TI)

Datasheet

used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Megabender MG 030 PT A3/H76

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-1075 · Mandrel tube bending machine

ERCOLINA - Megabender MG 030 PT A3/H76 - - -

Technical details

neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 35300 €︱ 716.59 €︱ 64 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 850 kg︱ 10 cm³︱ 64 x 3,3 mm︱ 2" mm︱ 60,3 x 2,2 mm︱ 60 x 60 x 2 mm︱ 40 x 60 x 4 mm︱ 60 x 40 x 3 mm︱ 76 mm︱ 200 mm︱ 20 mm︱

with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm

neu

ca. 12 - 14 Wochen ab Auf

Italien

35300 €

716.59 €

64 mm

4000 mm

950 mm

1250 mm

850 kg

10 cm³

64 x 3,3 mm

2" mm

60,3 x 2,2 mm

60 x 60 x 2 mm

40 x 60 x 4 mm

60 x 40 x 3 mm

76 mm

200 mm

20 mm

Description :

with mandrel 3 m length
FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide
Programmable C-axis bending
Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops
Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu
30 programs of 9 bends each can be memorized
Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)
External pressure gauges for easy setting of the system and closing pressure
Variable bending speed up to 4 rpm (Inverter versions)
Pneumatic chuck

ALTERNATIVELY:
model with mandrel length 1,5 / 4 / 6 mm

Datasheet

Plate Shear - Mechanical

Plum & Partner Werkzeugmaschinen GmbH
Winkelstraße 32
32257 Bünde
Deutschland

+49 05223 574444
+49 5223188330
info@plum-maschinen.de
www.plum-maschinen.de

#1082-08037 · Plate Shear - Mechanical

KAPEMA - SMP 20-20 - - Fabrikneu / new -

Technical details

sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱

The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

sheet width 2050 mm

plate thickness 2 mm

strokes per minute until 38

cutting angle 1,75 °

table height over floor 870 mm

total power requirement 3 kW

weight of the machine ca. 1520 kg

range L-W-H 2,2 x 0,6 x 1,2 m

Description :

The new motor guillotine type SMP is a well dimensioned machine with
all-welded link guides. The drive takes place with a
Standard geared brake motor via a chain connection to the main axle. the
Knives are of the highest quality. The optimal cutting angle secures the
Together with the rubber-covered blank holder perfect cuts.
Bearings and guides are maintenance and lubrication-free.
Standard equipment: • Back gauge 665 with mm scale. •
cutting edge lighting. • Section counter. • Table extensions 600 mm. •
Right angle stop, left. • Movable 24 V foot switch with emergency stop.
• Motor protection switch and emergency stop. • 2 cutting edges per knife. •
Rear protective grille, warranty = 12 months for single-shift operation.
Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

Machine dealer with own stock of 1600 m².

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 12-30

Plum & Partner Werkzeugmaschinen GmbH
Winkelstraße 32
32257 Bünde
Deutschland

+49 05223 574444
+49 5223188330
info@plum-maschinen.de
www.plum-maschinen.de

#1082-08408 · Plate Shear - Mechanical

KAPEMA - SMP 12-30 - - Fabrikneu / new -

Technical details

sheet width 1275 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 3 kW︱weight of the machine ca. 875 kg︱range L-W-H 1,7 x 1,68 x 1,1 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱Piece counter ︱Squaring arm ︱Support arms ︱

The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².

sheet width 1275 mm

plate thickness 3 mm

strokes per minute until 35

cutting angle 2,0 °

table height over floor 870 mm

thickness at "Niro-steel" 2 mm

total power requirement 3 kW

weight of the machine ca. 875 kg

range L-W-H 1,7 x 1,68 x 1,1 m

Description :

The guillotine shears type SMP is a well-dimensioned machine with
all-welded gate guides. The drive takes place with a standard geared brake
motor via a chain connection to the main axis. The knives are of the highest
quality. The optimal cutting angle ensures together with the rubber-coated
sheet metal holder, perfect cuts.
Bearings and guides are maintenance-free and lubrication-free.
Standard equipment: • Back gauge 635 with mm scale. •
Cutting line lighting. • Section counter. • Table extensions 600 mm. •
Right-angled stop, left. • Movable 24 V foot switch with emergency stop.
• Motor protection switch and emergency stop. • 2 cutting edges per knife. •
rear photocell.
Pre-freight to our stock + packaging 270, -.
Machine dealer with own stock of 1600 m².

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-30

Plum & Partner Werkzeugmaschinen GmbH
Winkelstraße 32
32257 Bünde
Deutschland

+49 05223 574444
+49 5223188330
info@plum-maschinen.de
www.plum-maschinen.de

#1082-08417 · Plate Shear - Mechanical

KAPEMA - SMP 20-30 - - Fabrikneu / new -

Technical details

sheet width 2050 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 4 kW︱weight of the machine ca. 1550 kg︱range L-W-H 2,5 x 1,57 x 1,21 m︱Electric 380 Volt ︱

sheet width 2050 mm

plate thickness 3 mm

strokes per minute until 35

cutting angle 2,0 °

table height over floor 870 mm

thickness at "Niro-steel" 2 mm

total power requirement 4 kW

weight of the machine ca. 1550 kg

range L-W-H 2,5 x 1,57 x 1,21 m

Description :

The new motor guillotine type SMP is a well dimensioned machine with
all-welded link guides. The drive takes place with a
Standard geared brake motor via a chain connection to the main axle. the
Knives are of the highest quality. The optimal cutting angle secures the
Together with the rubber-covered blank holder perfect cuts.
Bearings and guides are maintenance and lubrication-free.
Standard equipment: • Back gauge 665 with mm scale. •
cutting edge lighting. • Section counter. • Table extensions 600 mm. •
Right angle stop, left. • Movable 24 V foot switch with emergency stop.
• Motor protection switch and emergency stop. • 2 cutting edges per knife. •
Rear protective grille, warranty = 12 months for single-shift operation.
Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

Machine dealer with own stock of 1600 m².

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical RFR MS/24

Markus Hirsch GmbH
Hüttenstrasse 1
46284 Dorsten
Deutschland

+49 2362 95035 12
+49 2362 95035 10
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de

#1077-01210 · Plate Shear - Mechanical

RFR - MS/24 - - ca. 1960 -

Technical details

sheet width 2300 mm︱plate thickness 1,5 mm︱distance between columns 2400 mm︱impact length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,5 t︱

sheet width 2300 mm

plate thickness 1,5 mm

distance between columns 2400 mm

impact length 1000 mm

weight of the machine ca. 0,5 t

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical RAS 53.60

EMUK GmbH Werkzeugmaschinen
Siemensstrasse 24 a
76316 Malsch
Deutschland

+49 (0) 7246 1392
+49 (0) 7246 1394
info@emuk.de
www.emuk.de

#1058-22062 · Plate Shear - Mechanical

RAS - 53.60 - - 380/6 -

Technical details

sheet width 2000 mm︱plate thickness 2,25 mm︱distance between columns 2040 mm︱total power requirement 7,5 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,2x1,7x1,1 m︱

sheet width 2000 mm

plate thickness 2,25 mm

distance between columns 2040 mm

total power requirement 7,5 kW

weight of the machine ca. 1,5 t

dimensions of the machine ca. 2,2x1,7x1,1 m

Description :

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical OSTAS RGM 1550 x 3

WMT GmbH & Co.KG
Siemensstraße 1
46342 Velen-Ramsdorf
Deutschland

+49 2863 92477-47
+49 2863 92477-50
info@w-m-t.de
www.w-m-t.de

#1108-75103 · Plate Shear - Mechanical

OSTAS - RGM 1550 x 3 - - 2022 -

Technical details

sheet width 1550 mm︱plate thickness 3 mm︱distance between columns 1600 mm︱back stop - adjustable 600 mm︱connected load 3 kW︱weight of the machine ca. 1,1 t︱dimensions 2,06 x 2,14 x 1,21 m︱

Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)

sheet width 1550 mm

plate thickness 3 mm

distance between columns 1600 mm

back stop - adjustable 600 mm

connected load 3 kW

weight of the machine ca. 1,1 t

dimensions 2,06 x 2,14 x 1,21 m

Description :

Demonstration machine with small paint damage.
The machine works quietly and is powered by its geared motor
Braking system energy-saving.
Our machine is welded as a monobloc body from ST42 quality material.
The knives of the machine are of 2379 quality and the brand name is BOHLER.
These high-quality knives guarantee precise cutting.
Emergency stop button, foot switch and finger guard are included
standard equipment.
(Documentation in English only)

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA KGM 1015

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-439 · Plate Shear - Mechanical

HESSE by DURMA - KGM 1015 - - 2022 -

Technical details

gebraucht ︱ 2022 ︱ 9664 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 3100 €︱ 1 ︱ 1020 mm︱ 1.5 mm︱ 500 mm︱ 1950 mm︱ 1000 mm︱ 1150 mm︱ 420 kg︱

DEMO MACHINE, MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

gebraucht

2022

9664

prompt, Zwischenverkauf v

Türkei

3100 €

1020 mm

1.5 mm

500 mm

1950 mm

1000 mm

1150 mm

420 kg

Description :

DEMO MACHINE, MINT CONDITION
welded steel construction
with manual hold down unit
back gauge adjustable by handwheel
users manual in ENGLISH

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA MS 3004

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-467 · Plate Shear - Mechanical

HESSE by DURMA - MS 3004 - - 2022 -

Technical details

gebraucht ︱ 2022 ︱ 9615 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 24100 €︱ 1 ︱ 1 ︱ 3100 mm︱ 4 mm︱ 42 1/min︱ 750 mm︱ 7.5 kW︱ 2 Stk.︱ 800 mm︱ 450 mm︱ 3700 mm︱ 2300 mm︱ 1350 mm︱ 3730 kg︱

DEMO MACHINE - MINT CONDITION mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

gebraucht

2022

9615

prompt, Zwischenverkauf v

Türkei

24100 €

3100 mm

4 mm

42 1/min

750 mm

7.5 kW

2 Stk.

800 mm

450 mm

3700 mm

2300 mm

1350 mm

3730 kg

Description :

DEMO MACHINE - MINT CONDITION
mot. back gauge with digitalreadout DT 5
hold down with rubber pads
side lay with T-sluts
2 supporting arms
ball in the table
tape measure
tilt stop
light barriers on the back of the machine
cutting line illumination
user manual in GERMAN and ENGLISH

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA KGM 1215

HESSE+CO Maschinenfabrik GesmbH
Straße 4 Objekt 8
2351 Wiener Neudorf
Österreich

+43/2236/638 70-0
+43/2236/636 62
office@hesse-maschinen.com
https://www.hesse-maschinen.com

#1069-441 · Plate Shear - Mechanical

HESSE by DURMA - KGM 1215 - - 2022 -

Technical details

gebraucht ︱ 2022 ︱ 9665 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 3500 €︱ 1 ︱ 1250 mm︱ 1.5 mm︱ 500 mm︱ 2250 mm︱ 1000 mm︱ 1150 mm︱ 460 kg︱

DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

gebraucht

2022

9665

prompt, Zwischenverkauf v

Türkei

3500 €

1250 mm

1.5 mm

500 mm

2250 mm

1000 mm

1150 mm

460 kg

Description :

DEMO MACHINE - MINT CONDITION
welded steel construction
with manual hold down unit
back gauge adjustable by handwheel
users manual in ENGLISH

Datasheet

SKM Industriemaschinen
Röntgenstr. 3
89264 Weißenhorn
Deutschland

+49 (0) 7309 954 986 0
+49 (0) 7309 954 986 1
info@skm-maschinen.de
www.skm-maschinen.de

#2032-1144 · Plate Shear - Mechanical

OSTAS - RGM 1550 x 3 - - 2019 -

Technical details

sheet width 1550 mm︱plate thickness 3 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm︱

Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting

sheet width 1550 mm

plate thickness 3 mm

total power requirement 3 kW

weight of the machine ca. 1600 kg

dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm

Description :

Producer: OSTAS
Type: RGM 1050 x 3
YOM: new

Max. Shearing Length: 1.050 mm
Shearing Capacity: 3 mm
Shearing Angle: 2°30'
Strokes Per Minute: 35 d/d

Motor Power: 3 kW
Table Width: 510 mm
Table Height: 820 mm
Rear Gauge Distance: 500 mm
Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm
Weight: ca. 1.100 kg

Additional information:

• Manual backgauge with 500 mm stroke

• Squaring arm with T-slot, stopper and ruler

• Foot pedal

• Front sheet holding arms

• Cutting line lighting

• Protection Cages

optional:

• Cutting unit counter
• Motorised backgauge with 500 mm stroke
• Backgauge with NC control
• Pneumatic Sheet Support System
• Optical security bar
• 0-180° angle cutting

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical METALLKRAFT FTBS 1050-10

Heinz Sanders GmbH
Fresenburger Weg 4
49779 Niederlangen
Deutschland

+49 (0) 5939 9406 40
+49 (0) 5939 9406 50
maschinen@heinz-sanders.de
www.heinz-sanders.de

#1125-3320042 · Plate Shear - Mechanical

METALLKRAFT - FTBS 1050-10 - - 2017 -

Technical details

sheet width 1050 mm︱plate thickness 1 mm︱distance between columns 1000 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,16 x 0,93 x 0,73 m︱

sheet width 1050 mm

plate thickness 1 mm

distance between columns 1000 mm

weight of the machine ca. 0,2 t

dimensions of the machine ca. 1,16 x 0,93 x 0,73 m

Description :

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-94086 · Plate Shear - Mechanical

DURMA - MS 2504 - - 2012 -

Technical details

sheet width 2550 mm︱plate thickness 4,00 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱

** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife

sheet width 2550 mm

plate thickness 4,00 mm

distance between columns 2600 mm

back stop - adjustable 750 mm

no. of strokes 42 Hub/min

cutting angle 1°30

table width 450 mm

table height 800 mm

total power requirement 7,5 kW

weight of the machine ca. 3230 kg

dimensions of the machine ca. 3200 x 2300 x 1350 mm

Description :

** Current new price with special accessories ~ 33.000 euros
** from a maintenance workshop / good condition (!!)

Furnishing:
- robust / powerful mechanical guillotine shears
- electric backgauge, with ball screws
- with DURMA NC control - model D-Touch 7
* Control unit with touchscreen function
* 128 MB internal memory (programming possible)
* Multilingual (English, Turkish, German)
* INCH/metric conversion
- manual cutting gap adjustment, from the front
* analogue display of the material thickness
- 1x extra long side stop 2.000 mm, with support foot & T-slot
- 2x support arms
- Ball casters in the support table
- free-moving footswitch
- rear protective device (light barrier)
- original operating instructions (machine + control)

Special accessories included :
- Pneumatic sheet metal holding device, for thin sheet metal blanks
- 1x extra long side stop, with support foot
- 1x box with spare knife

Datasheet

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9325259 · Plate Shear - Mechanical

DURMA - MS 2504 - - 2012 -

Technical details

sheet width 2550 mm︱plate thickness 4,0 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱

sheet width 2550 mm

plate thickness 4,0 mm

distance between columns 2600 mm

back stop - adjustable 750 mm

no. of strokes 42 Hub/min

cutting angle 1°30

table width 450 mm

table height 800 mm

total power requirement 7,5 kW

weight of the machine ca. 3230 kg

dimensions of the machine ca. 3200 x 2300 x 1350 mm

Description :

** Current new price with special accessories ~ 33.000 euros
** from a maintenance workshop / good condition (!!)

Furnishing:
- robust / powerful mechanical guillotine shears
- electric backgauge, with ball screws
- with DURMA NC control - model D-Touch 7
* Control unit with touchscreen function
* 128 MB internal memory (programming possible)
* Multilingual (English, Turkish, German)
* INCH/metric conversion
- manual cutting gap adjustment, from the front
* analogue display of the material thickness
- 1x extra long side stop 2.000 mm, with support foot & T-slot
- 2x support arms
- Ball casters in the support table
- free-moving footswitch
- rear protective device (light barrier)
- original operating instructions (machine + control)

Special accessories included :
- Pneumatic sheet metal holding device, for thin sheet metal blanks
- 1x extra long side stop, with support foot
- 1x box with spare knife

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical HM NWKS 2000/3

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-94181 · Plate Shear - Mechanical

HM - NWKS 2000/3 - - 2010 - DIGI

Technical details

sheet width 2100 mm︱plate thickness 3,00 mm︱thickness at "Niro-steel" 1.5 mm︱blade length 2110 mm︱no. of strokes 34 Hub/min︱back stop - adjustable 1000 mm︱cutting angle 1.5 °︱work height max. 880 mm︱Control DIGI ︱engine output 6.25 kW︱weight 2650 kg︱range L-W-H 2750 x 2350 x 1550 mm︱

** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual

sheet width 2100 mm

plate thickness 3,00 mm

thickness at "Niro-steel" 1.5 mm

blade length 2110 mm

no. of strokes 34 Hub/min

back stop - adjustable 1000 mm

cutting angle 1.5 °

work height max. 880 mm

Control DIGI

engine output 6.25 kW

weight 2650 kg

range L-W-H 2750 x 2350 x 1550 mm

Description :

** Machine from a maintenance workshop
** maintained condition (!!)

Furnishing:
- robust electro-mechanical sheet metal shears
- Machine body in a closed design as an all-steel welded construction
- heavy / robust drive motor (5.5 KW)
- electro-motorized backgauge, including digital control unit
* Adjustment range max. 1.000 mm
* Input of target / actual value possible
- manual cutting gap adjustment, adjustable from the front
- 1x table side stop
- Ball rollers in the support table
- 1x freely movable foot switch, including EMERGENCY stop button
- front finger protection
- original instruction manual

Datasheet

A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17
48683 Ahaus
Deutschland

(0049)-2561-9384-71
(0049)-2561-9384-36
info@ab-maschinen.de
www.ab-maschinen.de

#1008-9325336 · Plate Shear - Mechanical

HM - NWKS 2000/3 - - 2010 - DIGI

Technical details

sheet width 2100 mm︱plate thickness 3.0 mm︱thickness at "Niro-steel" 1.5 mm︱blade length 2110 mm︱no. of strokes 34 Hub/min︱back stop - adjustable 1000 mm︱cutting angle 1.5 °︱work height max. 880 mm︱Control DIGI ︱engine output 6.25 kW︱weight 2650 kg︱range L-W-H 2750 x 2350 x 1550 mm︱

sheet width 2100 mm

plate thickness 3.0 mm

thickness at "Niro-steel" 1.5 mm

blade length 2110 mm

no. of strokes 34 Hub/min

back stop - adjustable 1000 mm

cutting angle 1.5 °

work height max. 880 mm

Control DIGI

engine output 6.25 kW

weight 2650 kg

range L-W-H 2750 x 2350 x 1550 mm

Description :

** Machine from a maintenance workshop
** maintained condition (!!)

Furnishing:
- robust electro-mechanical sheet metal shears
- Machine body in a closed design as an all-steel welded construction
- heavy / robust drive motor (5.5 KW)
- electro-motorized backgauge, including digital control unit
* Adjustment range max. 1.000 mm
* Input of target / actual value possible
- manual cutting gap adjustment, adjustable from the front
- 1x table side stop
- Ball rollers in the support table
- 1x freely movable foot switch, including EMERGENCY stop button
- front finger protection
- original instruction manual

* Machine link:
http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325336

Datasheet

used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0

Frech GmbH
Werderstr. 82
74889 Sinsheim
Deutschland

0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de

#1073-94167 · Plate Shear - Mechanical

SCHRÖDER - MHSU 1500/2,0 - - 2009 -

Technical details

sheet width 1530 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,840 t︱dimensions of the machine ca. 1,90 x 1,30 x 1,20 m︱

- manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier

sheet width 1530 mm

plate thickness 2,00 mm

weight of the machine ca. 0,840 t

dimensions of the machine ca. 1,90 x 1,30 x 1,20 m

Description :

- manual back gauge 500mm
- Hold-down device with hard rubber strip
- Sheet metal holding device mechanically controlled to the rear including
sheet metal slide
- Rear area protection via light barrier

Datasheet

TOP Manufacturer:

ERCOLINA - SCHWARZE-WIRTZ - TRANSFLUID -