'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

          Folding Machine

          Machinelist: Folding Machine

          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine HM Machinery HBM 3100-65S

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08500 · Folding Machine

          HM Machinery - HBM 3100-65S - - neu -

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱thickness at "Niro-steel" 4,5 mm︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱total power requirement 7,4 kW︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. 4,5 x 1,72 x 2 m︱Electric 380 Volt ︱manuel back gauge adjustable from the front 70 - 600 mm︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Video available on our website. ︱
          Machine dealer with own stock of 1600 m².
            sheet width 3100 mm
            plate thickness 6 mm
            thickness at "Niro-steel" 4,5 mm
            daylight upper clamping 100 mm
            Bending angle 0 - 135 °
            total power requirement 7,4 kW
            weight of the machine ca. 7,6 t
            dimensions of the machine ca. 4,5 x 1,72 x 2 m
            manuel back gauge adjustable fro. 70 - 600 mm
            Oil filling exklusive
            Description :
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine KAPEMA KFS 20/20

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08028 · Folding Machine

          KAPEMA - KFS 20/20 - - Fabrikneu / new -

          Technical details
          sheet width 2020 mm︱plate thickness 2 mm︱daylight upper clamping 122 mm︱bending angle max. 135 °︱range L-W-H 2,56 x 0,6 x 1,26 m︱weight of the machine ca. 1020 kg︱
          Segmented top rail for bending box profiles, upper beam clamping hand-operated, manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation. The bending performance refers to 380 N/mm² strength. Warranty = 12 months for single-layer operation. Warranty = 12 months for single-shift operation, this only covers spare parts the defective parts must be returned. The working time costs for The replacement is not covered, nor are the downtimes Machine. Machine dealer with own stock of 1600 m².
            sheet width 2020 mm
            plate thickness 2 mm
            daylight upper clamping 122 mm
            bending angle max. 135 °
            range L-W-H 2,56 x 0,6 x 1,26 m
            weight of the machine ca. 1020 kg
            Description :
            Segmented top rail for bending box profiles, upper beam clamping hand-operated,
            manual bending beam actuation with weight compensation, degreescale, adjustable
            bend stop. Warranty = 12 months for single-shift operation.
            The bending performance refers to 380 N/mm² strength.
            Warranty = 12 months for single-layer operation.
            Warranty = 12 months for single-shift operation, this only covers spare parts
            the defective parts must be returned. The working time costs for
            The replacement is not covered, nor are the downtimes
            Machine. Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine KAPEMA KFS 10/25

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08413 · Folding Machine

          KAPEMA - KFS 10/25 - - fabrikneu -

          Technical details
          sheet width 1020 mm︱plate thickness 2,5 mm︱distance between columns 1045 mm︱daylight opening max. 47 mm︱bending angle max. 135 °︱weight of the machine ca. 290 kg︱dimensions of the machine ca. 1,35 x 0,86 x 1,17 m︱
          Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. Machine dealer with own stock of 1600 m².
            sheet width 1020 mm
            plate thickness 2,5 mm
            distance between columns 1045 mm
            daylight opening max. 47 mm
            bending angle max. 135 °
            weight of the machine ca. 290 kg
            dimensions of the machine ca. 1,35 x 0,86 x 1,17 m
            Description :
            Sengmentable upper rail, upper clamping foot-operated, manual bending clamping
            operate. The bending performance refers to 380 N/mm² strength.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HM Machinery MBM 2000 - 20

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08502 · Folding Machine

          HM Machinery - MBM 2000 - 20 - - fabrikneu - Beijer

          Technical details
          sheet width 2020 mm︱plate thickness 2 mm︱control Beijer ︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱upper clamping drive 0,375 kW︱bend clamping drive 1,125 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 3 x 1,1 x 1,75 m︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Light barrier control ︱
          Machine dealer with own stock of 1600 m².
            sheet width 2020 mm
            plate thickness 2 mm
            control Beijer
            daylight upper clamping 100 mm
            Bending angle 0 - 135 °
            upper clamping drive 0,375 kW
            bend clamping drive 1,125 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 3 x 1,1 x 1,75 m
            Oil filling exklusive
            Description :
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2095 - 20 / 3 / M200 CNC

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12062 · Folding Machine

          FASTI - 2095 - 20 / 3 / M200 CNC - - 1999 - Fastimatic M200

          Technical details
          sheet width 2040 mm︱plate thickness 3 mm︱daylight upper clamping 350 mm︱bending angle max. 0-135 °︱adjustment of lower and bend clamping 80 mm︱control Fastimatic M200 ︱power requirement 2,2/1,5 kW︱weight of the machine ca. 2460 kg︱dimensions of the machine ca. 3,2 x 2,8 x 2,1 m︱Electric 400 Volt ︱CNC-control with screen ︱Mot. back gauge 1000 mm︱Foot switch ︱Condition: ready for operation ︱Condition: very good ︱CE signed ︱Video available on our website. ︱
          Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².
            sheet width 2040 mm
            plate thickness 3 mm
            daylight upper clamping 350 mm
            bending angle max. 0-135 °
            adjustment of lower and bend cla. 80 mm
            control Fastimatic M200
            power requirement 2,2/1,5 kW
            weight of the machine ca. 2460 kg
            dimensions of the machine ca. 3,2 x 2,8 x 2,1 m
            Mot. back gauge 1000 mm
            Description :
            Motorized machine with motorized bending beam adjustment for setting the sheet
            thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the
            top cheek stroke, the bending angle and the back gauge with max. 30 working
            steps, emergency stop switch with magnetic holder, back gauge with ball screw
            spindles, CE mark. The bending performance refers to sheets of strength of 400
            N / mm². Little used machine, very good condition - original colour!
            Please notice that the price of a new CNC-machine in this dimension with back
            gauge is about 65000,--.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-20

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08037 · Plate Shear - Mechanical

          KAPEMA - SMP 20-20 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 2 mm
            strokes per minute until 38
            cutting angle 1,75 °
            table height over floor 870 mm
            total power requirement 3 kW
            weight of the machine ca. 1520 kg
            range L-W-H 2,2 x 0,6 x 1,2 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 12-30

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08408 · Plate Shear - Mechanical

          KAPEMA - SMP 12-30 - - Fabrikneu / new -

          Technical details
          sheet width 1275 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 3 kW︱weight of the machine ca. 875 kg︱range L-W-H 1,7 x 1,68 x 1,1 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱Piece counter ︱Squaring arm ︱Support arms ︱
          The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².
            sheet width 1275 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 3 kW
            weight of the machine ca. 875 kg
            range L-W-H 1,7 x 1,68 x 1,1 m
            Description :
            The guillotine shears type SMP is a well-dimensioned machine with
            all-welded gate guides. The drive takes place with a standard geared brake
            motor via a chain connection to the main axis. The knives are of the highest
            quality. The optimal cutting angle ensures together with the rubber-coated
            sheet metal holder, perfect cuts.
            Bearings and guides are maintenance-free and lubrication-free.
            Standard equipment: • Back gauge 635 with mm scale. •
            Cutting line lighting. • Section counter. • Table extensions 600 mm. •
            Right-angled stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            rear photocell.
            Pre-freight to our stock + packaging 270, -.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-30

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08417 · Plate Shear - Mechanical

          KAPEMA - SMP 20-30 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 4 kW︱weight of the machine ca. 1550 kg︱range L-W-H 2,5 x 1,57 x 1,21 m︱Electric 380 Volt ︱
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 4 kW
            weight of the machine ca. 1550 kg
            range L-W-H 2,5 x 1,57 x 1,21 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RAS 82.25

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12333 · Plate Shear - Mechanical

          RAS - 82.25 - - -

          Technical details
          sheet width 2540 mm︱plate thickness 2 mm︱strokes per minute until 63 ︱throat 100 mm︱cutting angle 1,13 °︱table height 750 mm︱table width 320 mm︱table height over floor 750 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 3,1 x 2 x 1,3 m︱Electric 380 Volt ︱Rear register front operated 15 - 550 ︱Foot switch ︱Squaring arm ︱Support arms 3 x ︱Rear sheet tray ︱
          Motorized guillotine shears in the swing cutting system with adjustable from the front manual backgauge with analogue display and reading optics. Power transmission via gearbox, eccentric shaft and connecting rod on the cutter bar. Less noise level because the gear is only switched on during the cutting process is. Hold-down beam with continuous pressure element made of elastomers material that ensures secure clamping of the sheet metal. The cutting performance refers to 400 N/mm² strength. The machine was used in air duct construction and only cut sheets of 1 mm. Machine dealer with own stock of 1600 m².
            sheet width 2540 mm
            plate thickness 2 mm
            strokes per minute until 63
            throat 100 mm
            cutting angle 1,13 °
            table height 750 mm
            table width 320 mm
            table height over floor 750 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 3,1 x 2 x 1,3 m
            Rear register front operated 15 - 550
            Support arms 3 x
            Description :
            Motorized guillotine shears in the swing cutting system with adjustable from
            the front manual backgauge with analogue display and reading optics. Power
            transmission via gearbox, eccentric shaft and connecting rod on the cutter bar.
            Less noise level because the gear is only switched on during the cutting process
            is. Hold-down beam with continuous pressure element made of elastomers
            material that ensures secure clamping of the sheet metal.
            The cutting performance refers to 400 N/mm² strength.
            The machine was used in air duct construction and only cut sheets of 1 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль торговця: Plum & Partner Werkzeugmaschinen GmbH

          Зв'язатися з трейдером



            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Бюнде
            Німеччина
            + 49 05223 574444 "> + 49 05223 574444
            + 49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Профіль Трейдера



          TOP Manufacturer:

          BIEGEMASTER - FASTI - FINTEK - HUVEMA - BERNARDO - SCHROEDER - RAS - ERBEND - HERA - SCHRÖDER -

          Plum & Partner Werkzeugmaschinen GmbH 32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444
           

          Trader Profile



          Machine category


          · 3D Drucker Metall SLM · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspanntisch · Ausdrehkopf · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - Automatisch · Bandsäge - horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohranlage · Bohrer · Bohrerschleifmaschine · Bördelmaschine · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Eckenverbindungsmaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Entgratmaschine · Falzformer · Flachschleifmaschine · Fräseinrichtung · Frässtichel-Schleifmaschine · Furnierpresse · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteprüfer · Industriesauger · Kaltkreissäge · Kanal-Falzmaschine · Kolbenkompressor · Koordinatenschleifmaschine · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mechanikerdrehbank · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Plasmaschneidmaschine · Positionierer · Profilieranlage · Profilstahlschere - Kombiniert · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleif - Bürstanlage · Schleifmaschinenzubehör · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schweißdrehtisch - rund · Schwenkbiegemaschine · Schwingfußelement · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Werkstattpresse - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·
          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені