Slitting Lines

sheet width 3060 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱

---

Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325

sheet width 3060 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱

---

Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment

sheet width 3060 mm︱plate thickness 8.0 mm︱thickness at "Niro-steel" 6.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱

---

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329

sheet width 3060 mm︱plate thickness 8,00 mm︱thickness at "Niro-steel" 6,00 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱

---

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration

sheet width 3060 mm︱plate thickness 8 mm︱rear stop 1000 mm︱weight of the machine ca. 7000 kg︱

---

Equipment/accessories: - Motorized cutting gap adjustment - Elgo control unit P 40 T (retrofitted in 2022) - New FI and rotary control for the backgauge installed in 2022 - Sheet metal holding device - Support extension

sheet width 3060 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱

---

Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)

sheet width 3060 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱

---

Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)

sheet width 2560 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 2600 mm︱down holder 12 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control ELGO TYP 71 ︱back stop - adjustable max. 750 mm︱total power requirement 11.37 kW︱weight 3800 kg︱range L-W-H 3030 x 1910 x 1510 mm︱

---

** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions * Machinelink: https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326

sheet width 2560 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱distance between columns 2600 mm︱down holder 12 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control ELGO TYP 71 ︱back stop - adjustable max. 750 mm︱total power requirement 11.37 kW︱weight 3800 kg︱range L-W-H 3030 x 1910 x 1510 mm︱

---

** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions