'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2022

          Hand-Lever Shear

          Machinelist: Hand-Lever Shear

          Hand-Lever Shear

          used Sheet metal working / shaeres / bending Hand-Lever Shear MUHR & BENDER 3S/6R

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7374 · Hand-Lever Shear

          MUHR & BENDER - 3S/6R - - Unbekannt -

          Technical details
          sheet width - max. 200 mm︱plate thickness 6 mm︱flat steel 70 x 7 mm︱round bar steel 13 mm︱weight of the machine ca. 50 kg︱dimensions of the machine ca. 800 x 500 x 1800 mm︱
            sheet width - max. 200 mm
            plate thickness 6 mm
            flat steel 70 x 7 mm
            round bar steel 13 mm
            weight of the machine ca. 50 kg
            dimensions of the machine ca. 800 x 500 x 1800 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear PEDDINGHAUS 4 RP 8

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26642 · Hand-Lever Shear

          PEDDINGHAUS - 4 RP 8 - - 1984 -

          Technical details
          sheet width - max. 40 mm︱plate thickness 8 mm︱L-beam 40 x 6 mm︱weight of the machine ca. 0,08 t︱dimensions of the machine ca. 1 x 1 x 1,5 m︱
            sheet width - max. 40 mm
            plate thickness 8 mm
            L-beam 40 x 6 mm
            weight of the machine ca. 0,08 t
            dimensions of the machine ca. 1 x 1 x 1,5 m


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear MUBEA 2/8/300

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10854 · Hand-Lever Shear

          MUBEA - 2/8/300 - - -

          Technical details
          sheet width - max. 300 mm︱plate thickness 8 mm︱flat steel 80 x 10 mm︱blade length 300 mm︱machine length 860 mm︱machine height 565 mm︱weight of the machine ca. 172 kg︱
          Long measuring shear Machine dealer with own stock of 1600 m².
            sheet width - max. 300 mm
            plate thickness 8 mm
            flat steel 80 x 10 mm
            blade length 300 mm
            machine length 860 mm
            machine height 565 mm
            weight of the machine ca. 172 kg
            Description :
            Long measuring shear
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear Fabr. UNBEKANNT/NOT KNOWN -

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11101 · Hand-Lever Shear

          Fabr. UNBEKANNT/NOT KNOWN - - - - -

          Technical details
          sheet width - max. 170 mm︱plate thickness 3,4 mm︱angle steel/side length 50 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 0,7 x 0,16 x 2,1 m︱
          Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².
            sheet width - max. 170 mm
            plate thickness 3,4 mm
            angle steel/side length 50 mm
            weight of the machine ca. 70 kg
            dimensions of the machine ca. 0,7 x 0,16 x 2,1 m
            Description :
            Is cutting flat steel, L-beam, Scorper, round and square material.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear BLEMAS KGM1020 (Demo)

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11963 · Hand-Lever Shear

          BLEMAS - KGM1020 (Demo) - - -

          Technical details
          sheet width - max. 1020 mm︱plate thickness 1,5 mm︱cutting length 1020 mm︱weight ca. 300 kg︱dimensions of the machine ca. 1,3 x 0,8 m︱Side stop 600 mm︱Material place of deposit ausziehbar ︱
          Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m².
            sheet width - max. 1020 mm
            plate thickness 1,5 mm
            cutting length 1020 mm
            weight ca. 300 kg
            dimensions of the machine ca. 1,3 x 0,8 m
            Side stop 600 mm
            Material place of deposit ausziehbar
            Description :
            Hand lever shears with counterweight, length stop, blank holder with
            Quick clamping, mm scale on the table, pull-out sheet metal support.
            Demonstration machine at a special price.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hand-Lever Shear MUBEA 5 SN / 8 R

          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland
          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20101 · Hand-Lever Shear

          MUBEA - 5 SN / 8 R - - -

          Technical details
          sheet width - max. 80 x 12 mm︱plate thickness 8,0 mm︱weight of the machine ca. 135 Kg︱dimensions of the machine ca. 1,20 x 0,50 x 1,75 m︱
          - Serial-no.: 305-11.06 - fixed on rolls
            sheet width - max. 80 x 12 mm
            plate thickness 8,0 mm
            weight of the machine ca. 135 Kg
            dimensions of the machine ca. 1,20 x 0,50 x 1,75 m
            Description :
            - Serial-no.: 305-11.06
            - fixed on rolls


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

          • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/86

          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland
          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05155 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/86 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 100 mm︱pre-bending 86 ︱diameter of upper rolls 750 mm︱diameter of lower rolls 700 mm︱side roll diameter 600 mm︱power capacity 132 kW︱min. bending diameter 825 / 2750 mm︱weight of the machine ca. 80 t︱dimensions of the machine ca. 8,0 x 3,1 x 4,1 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulic powered cover for easy material extracting - 2-axis digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (10.187 Euro) - material feeding table 1000 x 2000 (5.600 Euro) - center support (33.250 Euro) - 2 x side supports (29.000 Euro)
            sheet width 3100 mm
            plate thickness 100 mm
            pre-bending 86
            diameter of upper rolls 750 mm
            diameter of lower rolls 700 mm
            side roll diameter 600 mm
            power capacity 132 kW
            min. bending diameter 825 / 2750 mm
            weight of the machine ca. 80 t
            dimensions of the machine ca. 8,0 x 3,1 x 4,1 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulic powered cover for easy material extracting
            - 2-axis digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm

            Optional Accessories:
            - variable speed of rotation (10.187 Euro)
            - material feeding table 1000 x 2000 (5.600 Euro)
            - center support (33.250 Euro)
            - 2 x side supports (29.000 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/32

          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland
          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05862 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/32 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 40 mm︱pre-bending 32 ︱diameter of upper rolls 460 mm︱diameter of lower rolls 420 mm︱side roll diameter 360 mm︱power capacity 30 kW︱min. bending diameter 1380 mm︱weight of the machine ca. 30,1 t︱dimensions of the machine ca. 6,3 x 2,3 x 2,6 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Euro)
            sheet width 3100 mm
            plate thickness 40 mm
            pre-bending 32
            diameter of upper rolls 460 mm
            diameter of lower rolls 420 mm
            side roll diameter 360 mm
            power capacity 30 kW
            min. bending diameter 1380 mm
            weight of the machine ca. 30,1 t
            dimensions of the machine ca. 6,3 x 2,3 x 2,6 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulically opened/closed drop end controlled from control panel
            - digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm
            - Warranty 12 months

            Optional Accessories:
            - variable speed of rotation (5.858,00 Euro)
            - material feeding table (5.100,00 Euro)
            - center support (18.750,00 Euro)
            - 2 x side supports (15.000,00 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-200

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2215 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-200 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 45900 €︱ 931.77 €︱ 2050 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 200 - 220 mm︱ 200 - 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3950 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            45900 €
            931.77 €
            2050 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            200 - 220 mm
            200 - 220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3950 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 15-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2161 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 15-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 49000 €︱ 994.7 €︱ 1550 mm︱ 12 mm︱ 12 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 220 mm︱ 200 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 3900 mm︱ 1150 mm︱ 1250 mm︱ 3600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            49000 €
            994.7 €
            1550 mm
            12 mm
            12 mm
            10 mm
            10 mm
            8 mm
            220 mm
            200 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            3900 mm
            1150 mm
            1250 mm
            3600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-260 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 53700 €︱ 1079.37 €︱ 2550 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4900 mm︱ 1150 mm︱ 1250 mm︱ 4600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            53700 €
            1079.37 €
            2550 mm
            9 mm
            9 mm
            7 mm
            7 mm
            5 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4900 mm
            1150 mm
            1250 mm
            4600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by ISITAN 4R HMS 1550x130

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1540 · Plate Bending Machine - 4 Rolls

          HESSE by ISITAN - 4R HMS 1550x130 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 23000 €︱ 471.5 €︱ 1550 mm︱ 4.5 mm︱ 4.5 mm︱ 3.5 mm︱ 4.5 mm︱ 3.5 mm︱ 3.5 mm︱ 2.5 mm︱ 130 mm︱ 130 mm︱ 130 mm︱ 5 m/min︱ 2,2 + 1,1 kW︱ 3300 mm︱ 1150 mm︱
          motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            23000 €
            471.5 €
            1550 mm
            4.5 mm
            4.5 mm
            3.5 mm
            4.5 mm
            3.5 mm
            3.5 mm
            2.5 mm
            130 mm
            130 mm
            130 mm
            5 m/min
            2,2 + 1,1 kW
            3300 mm
            1150 mm
            Description :
            motorized roller drive
            upper and lower roller driven
            hydraulic side roll feed
            3 digital displays
            hydraulic folding bearings
            hardened rollers
            conical bending device
            user manual in GERMAN or ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by ISITAN 4RH 10x90

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2163 · Plate Bending Machine - 4 Rolls

          HESSE by ISITAN - 4RH 10x90 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 27000 €︱ 548.1 €︱ 1050 mm︱ 2.5 mm︱ 2.5 mm︱ 2 mm︱ 90 mm︱ 4,5 m/min︱ 2.2 kW︱ 2250 mm︱ 1000 mm︱ 1500 mm︱ 900 kg︱
          FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            27000 €
            548.1 €
            1050 mm
            2.5 mm
            2.5 mm
            2 mm
            90 mm
            4,5 m/min
            2.2 kW
            2250 mm
            1000 mm
            1500 mm
            900 kg
            Description :
            FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE)
            4 rolls
            NC control with touchscreen
            Top roll driven by hydromotor and plantary gearbox
            Hydraulic drop end
            Mobile control panel
            Hardened rolls
            Operating manual in English or German

            OPTION:
            Feeding table price on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-180

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2213 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-180 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 40500 €︱ 822.15 €︱ 2050 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 180 mm︱ 180 mm︱ 150 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3790 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            40500 €
            822.15 €
            2050 mm
            8 mm
            8 mm
            6 mm
            6 mm
            4 mm
            180 mm
            180 mm
            150 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3790 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-150

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-250 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-150 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 35000 €︱ 710.5 €︱ 2050 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 4 mm︱ 3 mm︱ 150 mm︱ 150 mm︱ 130 mm︱ 1,5 / 6 m/min︱ 4 kW︱ 4250 mm︱ 960 mm︱ 1100 mm︱ 2800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            35000 €
            710.5 €
            2050 mm
            6 mm
            6 mm
            4 mm
            4 mm
            3 mm
            150 mm
            150 mm
            130 mm
            1,5 / 6 m/min
            4 kW
            4250 mm
            960 mm
            1100 mm
            2800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 20-280

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2243 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 20-280 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 82900 €︱ 1666.29 €︱ 2050 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 16 mm︱ 12 mm︱ 280 mm︱ 280 mm︱ 220 mm︱ 1,5 / 5 m/min︱ 16,5 kW︱ 4350 mm︱ 1700 mm︱ 1850 mm︱ 8550 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            82900 €
            1666.29 €
            2050 mm
            20 mm
            20 mm
            16 mm
            16 mm
            12 mm
            280 mm
            280 mm
            220 mm
            1,5 / 5 m/min
            16,5 kW
            4350 mm
            1700 mm
            1850 mm
            8550 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT (PRICES ON REQUEST):
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 30-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-278 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 30-350 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 127000 €︱ 2527.3 €︱ 3100 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 16 mm︱ 12 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 6000 mm︱ 2200 mm︱ 1900 mm︱ 15000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            127000 €
            2527.3 €
            3100 mm
            20 mm
            20 mm
            16 mm
            16 mm
            12 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            6000 mm
            2200 mm
            1900 mm
            15000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 30-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-262 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 62200 €︱ 1250.22 €︱ 3100 mm︱ 9 mm︱ 8 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1470 mm︱ 6850 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            62200 €
            1250.22 €
            3100 mm
            9 mm
            8 mm
            7 mm
            7 mm
            5 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1470 mm
            6850 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-270 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 59000 €︱ 1185.9 €︱ 2550 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1470 mm︱ 6170 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            59000 €
            1185.9 €
            2550 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1470 mm
            6170 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 30-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-272 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 67700 €︱ 1360.77 €︱ 3100 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1550 mm︱ 7685 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            67700 €
            1360.77 €
            3100 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1550 mm
            7685 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-276 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 60500 €︱ 1216.05 €︱ 2050 mm︱ 16 mm︱ 16 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4300 mm︱ 1600 mm︱ 1550 mm︱ 6100 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            60500 €
            1216.05 €
            2050 mm
            16 mm
            16 mm
            13 mm
            13 mm
            10 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4300 mm
            1600 mm
            1550 mm
            6100 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 25-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-280 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 25-350 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 117800 €︱ 2344.22 €︱ 2550 mm︱ 25 mm︱ 25 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 5500 mm︱ 2000 mm︱ 1900 mm︱ 13000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            117800 €
            2344.22 €
            2550 mm
            25 mm
            25 mm
            20 mm
            20 mm
            16 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            5500 mm
            2000 mm
            1900 mm
            13000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by DURMA HRB-4 20240

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1135 · Plate Bending Machine - 4 Rolls

          HESSE by DURMA - HRB-4 20240 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Türkei ︱ 58900 €︱ 1183.89 €︱ 2050 mm︱ 13 mm︱ 10 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 240 mm︱ 240 mm︱ 190 mm︱ 820 mm︱ 11 kW︱ 3830 mm︱ 1160 mm︱ 1200 mm︱
          4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            58900 €
            1183.89 €
            2050 mm
            13 mm
            10 mm
            13 mm
            10 mm
            10 mm
            8 mm
            240 mm
            240 mm
            190 mm
            820 mm
            11 kW
            3830 mm
            1160 mm
            1200 mm
            Description :
            4 rolls
            fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box
            hydr. side rolls positioning with electronical synchronisation
            hydr. lower roll feed with mechanical synchronisation
            adjustable pinching pressure
            variable rolling speed
            hardened rolls
            conical bending device
            hydraulic drop-end bearing
            moveable control panel
            overload protection
            user manual in GERMAN or ENGLISH
            according to CE rules

            OPTIONAL:
            NC control
            upper and lateral supports

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1483 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 64100 €︱ 1288.41 €︱ 2550 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1550 mm︱ 6800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            64100 €
            1288.41 €
            2550 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1550 mm
            6800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   
            •
          TOP Manufacturer:

          MUBEA - HUVEMA - PEDDINGHAUS - BLEMAS - FABR. UNBEKANNT/NOT KNOWN - MUHR & BENDER -

          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені