'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          decoiler straightening machine

          Machinelist: decoiler straightening machine


          decoiler straightening machine

          used Sheet metal working / shaeres / bending decoiler straightening machine FREI BA 1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183054V · decoiler straightening machine

          FREI - BA 1 - - ? - konventionell

          Technical details
          material width 450 mm︱coil weight t︱coil internal diameter mm︱coil external diameter 1500 mm︱material thickness mm︱no. of straightening rolls 7 ︱straightening roll diameter mm︱number of draw-in rolls 2 ︱power capacity kW︱dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m︱weight decoiler 1,8 t︱dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m︱weight straightener 1,3 t︱
          straightening machine decoiler with snubber roll, coil lifting device
            material width 450 mm
            coil external diameter 1500 mm
            no. of straightening rolls 7
            number of draw-in rolls 2
            dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m
            weight decoiler 1,8 t
            dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m
            weight straightener 1,3 t
            Description :
            straightening machine
            decoiler
            with snubber roll, coil lifting device


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine SCHULER AHR 320-2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-070002 · decoiler straightening machine

          SCHULER - AHR 320-2 - - ? - konventionell

          Technical details
          material width 320 mm︱coil weight 2,6 t︱material thickness 0,5 - 2,0 mm︱coil internal diameter 400 - 510 mm︱coil external diameter 1200 mm︱no. of straightening rolls 7 ︱straightening roll diameter 50 mm︱number of draw-in rolls 2 ︱band speed 0 - 30 m/min︱power capacity 1,5 kW︱weight 1,5 t︱Dimensions (WxDxH) m︱
          with infinitely variable drive, manual expansion
            material width 320 mm
            coil weight 2,6 t
            material thickness 0,5 - 2,0 mm
            coil internal diameter 400 - 510 mm
            coil external diameter 1200 mm
            no. of straightening rolls 7
            straightening roll diameter 50 mm
            number of draw-in rolls 2
            band speed 0 - 30 m/min
            power capacity 1,5 kW
            weight 1,5 t
            Description :
            with infinitely variable drive, manual expansion


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine ARKU AH 3000/2/250/ST / RM 3025.4/2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233015A · decoiler straightening machine

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 - konventionell

          Technical details
          material width 250 mm︱coil weight 2 x 3,0 t︱material thickness 1,5 - 6,0 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1800 mm︱material cross-cut 6,0 bei BB100 / 3,8mm bei mm²︱no. of straightening rolls 21 ︱straightening roll diameter 30 mm︱number of draw-in rolls 4 ︱speed - 20 m/min︱power requirement 18,0 kW︱Weight 4,2 t︱Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m︱Weight 2,40 kg︱dimensions (WxDxH) 2,0 x 2,1 x 2,2 m︱
          Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic
            material width 250 mm
            coil weight 2 x 3,0 t
            material thickness 1,5 - 6,0 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1800 mm
            material cross-cut 6,0 bei BB100 / 3,8mm bei mm²
            no. of straightening rolls 21
            straightening roll diameter 30 mm
            number of draw-in rolls 4
            speed - 20 m/min
            power requirement 18,0 kW
            Weight 4,2 t
            Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m
            Weight 2,40 kg
            dimensions (WxDxH) 2,0 x 2,1 x 2,2 m
            Description :
            Decoiler AH 3000/2/250/ST
            with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting
            Straightening machine RM 3025.4/21
            with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls
            coil loop control via ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine SCHLEICHER RMS Vario-12-70/9 / HES-12-650


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133045 · decoiler straightening machine

          SCHLEICHER - RMS Vario-12-70/9 / HES-12-650 - - 1998 - Siemens S 5

          Technical details
          material width 100 - 450 mm︱material thickness 1,0 - 14,0 mm︱coil weight 5,0 t︱coil internal diameter 470 - 520 mm︱coil external diameter 1100 - 2000 mm︱no. of straightening rolls 12 ︱straightening roll diameter 2x70 / 2x96 / 8x127 mm︱number of draw-in rolls 2 ︱inlet roll diameter 160 mm︱min. material width 100 mm︱speed 15 m/min︱power requirement 75,0 kW︱weight of decoiler 6,4 t︱weight of straightening machine 12,8 t︱dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm︱dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm︱
          Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right
            material width 100 - 450 mm
            material thickness 1,0 - 14,0 mm
            coil weight 5,0 t
            coil internal diameter 470 - 520 mm
            coil external diameter 1100 - 2000 mm
            no. of straightening rolls 12
            straightening roll diameter 2x70 / 2x96 / 8x127 mm
            number of draw-in rolls 2
            inlet roll diameter 160 mm
            min. material width 100 mm
            speed 15 m/min
            power requirement 75,0 kW
            weight of decoiler 6,4 t
            weight of straightening machine 12,8 t
            dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm
            dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm
            Description :
            Straightening machine RMS Vario-12-70/96/127-450
            with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge
            Decoiler HES 12-650
            with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion
            hydraulic coil lifting device
            hydraulic loop bridge
            coil loop control via ultrasonic
            cropping shears HSO 150-0450
            working direction from left to right


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine HENSEL BRMS 4/500/10  /  BSH 3-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193014V · decoiler straightening machine

          HENSEL - BRMS 4/500/10 / BSH 3-500 - - 1996 - konventionell

          Technical details
          material width 500 mm︱coil weight 2,5 t︱material thickness 0,2 - 3,0 mm︱coil internal diameter 480 - 530 mm︱coil external diameter 1300 mm︱material cross-cut 1000 mm²︱no. of straightening rolls 10 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱roll diameter 120 mm︱speed 20 m/min︱power requirement 4,0 + 1,1 kW︱weight of straightening machine 2,3 t︱dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm︱weight of decoiler 0,95 t︱dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm︱
          Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available
            material width 500 mm
            coil weight 2,5 t
            material thickness 0,2 - 3,0 mm
            coil internal diameter 480 - 530 mm
            coil external diameter 1300 mm
            material cross-cut 1000 mm²
            no. of straightening rolls 10
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            roll diameter 120 mm
            speed 20 m/min
            power requirement 4,0 + 1,1 kW
            weight of straightening machine 2,3 t
            dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm
            weight of decoiler 0,95 t
            dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm
            Description :
            Straightening machine BRMS 4/500/10
            with infinitely variable drive
            Decoiler BSH 3-500
            with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll
            coil loop control via light guard
            can be offered without putting into operation or with putting into operation in given condition
            video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine KOHLER KRE 30.400/9-2000.2 H


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223029 · decoiler straightening machine

          KOHLER - KRE 30.400/9-2000.2 H - - 1995 - konventionell

          Technical details
          material width 400 mm︱coil weight 2 x 2,0 t︱material thickness 0,4 - 3,0 mm︱coil internal diameter 460 - 530 mm︱coil external diameter 1500 mm︱material cross-cut 1200 mm²︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱speed 0 - 40 m/min︱power requirement 15,0 kW︱Weight 4,6 t︱Dimensions (WxDxH) 2,5 x 3,3 x 2,0 m︱
          - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion - coil loop control via ultrasound
            material width 400 mm
            coil weight 2 x 2,0 t
            material thickness 0,4 - 3,0 mm
            coil internal diameter 460 - 530 mm
            coil external diameter 1500 mm
            material cross-cut 1200 mm²
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            speed 0 - 40 m/min
            power requirement 15,0 kW
            Weight 4,6 t
            Dimensions (WxDxH) 2,5 x 3,3 x 2,0 m
            Description :
            - straightening machine type KRE 30.400/9
            with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device
            - double decoiler type 2000.2 H
            with pneumatic lag brake, hydraulic expansion
            - coil loop control via ultrasound


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine KOHLER 30.400/9-2000.2 H


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223031 · decoiler straightening machine

          KOHLER - 30.400/9-2000.2 H - - 1995 - konventionell

          Technical details
          material width 400 mm︱coil weight 2 x 2,0 t︱material thickness 0,4 - 3,0 mm︱coil internal diameter 460 - 530 mm︱coil external diameter 1500 mm︱material cross-cut 1200 mm²︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱speed 0 - 40 m/min︱power requirement 15,0 kW︱Weight 5,2 t︱Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m︱
          - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound
            material width 400 mm
            coil weight 2 x 2,0 t
            material thickness 0,4 - 3,0 mm
            coil internal diameter 460 - 530 mm
            coil external diameter 1500 mm
            material cross-cut 1200 mm²
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            speed 0 - 40 m/min
            power requirement 15,0 kW
            Weight 5,2 t
            Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m
            Description :
            - straightening machine type KRE 30.400/9
            with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device
            - double decoiler type 2000.2 H
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll
            - coil loop control via ultrasound


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine DREHER 2370 BFPS 1468/5  /  1676 BV 1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223033 · decoiler straightening machine

          DREHER - 2370 BFPS 1468/5 / 1676 BV 1 - - 1991 - konventionell

          Technical details
          material width 300 mm︱coil weight 2,5 t︱material thickness 0,8 - 4,0 mm︱coil internal diameter 370 - 450 (550) mm︱coil external diameter 1400 mm︱no. of straightening rolls 7 ︱straightening roll diameter 80 mm︱number of draw-in rolls 4 ︱power requirement kW︱weight of the decoiler 1,4 t︱dimensions of the decoiler 2,7 x 1,2 x 2,0 mxmxm︱weight of the straightener 1,4 t︱dimensions of straightener 1,4 x 1,5 x 2,0 mxmxm︱
          straightening machine (type 1676 BV 1339/4) with infinitely variable drive, pneumatic lifting of the inlet rolls, rolls hard chrome plated, material guide (centrally adjustable), hydraulic operated infeed aid (modell B3M), roller basket decoiler (type 2370 BFPS 1468/5) with hydraulic auxiliary drive (modell M0), lag brake, hydraulic centralized expansion, pneumatic snubber roll (modell 2370-55), segments to increase the inner diameter (100mm)
            material width 300 mm
            coil weight 2,5 t
            material thickness 0,8 - 4,0 mm
            coil internal diameter 370 - 450 (550) mm
            coil external diameter 1400 mm
            no. of straightening rolls 7
            straightening roll diameter 80 mm
            number of draw-in rolls 4
            weight of the decoiler 1,4 t
            dimensions of the decoiler 2,7 x 1,2 x 2,0 mxmxm
            weight of the straightener 1,4 t
            dimensions of straightener 1,4 x 1,5 x 2,0 mxmxm
            Description :
            straightening machine (type 1676 BV 1339/4)
            with infinitely variable drive, pneumatic lifting of the inlet rolls, rolls hard chrome plated, material guide (centrally adjustable), hydraulic operated infeed aid (modell B3M), roller basket
            decoiler (type 2370 BFPS 1468/5)
            with hydraulic auxiliary drive (modell M0), lag brake, hydraulic centralized expansion, pneumatic snubber roll (modell 2370-55), segments to increase the inner diameter (100mm)


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine DREHER 2350 BF / 1675 BV


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233040 · decoiler straightening machine

          DREHER - 2350 BF / 1675 BV - - 1988 - konventionell

          Technical details
          material width 300 mm︱coil weight 1,25 t︱material thickness 0,2 - 3,5 mm︱coil internal diameter 320 - 420 (520) mm︱coil external diameter 1300 mm︱material cross-cut 3,5x50 / 2,5x300 mm²︱no. of straightening rolls 7 ︱straightening roll diameter 60 mm︱number of draw-in rolls 2+2 ︱power requirement 2,0 kW︱Weight 0,45 + 0,4 t︱dimensions of the machine ca. 1,2 x 1,3 x 1,5 mxmxm︱dimensions of the machine ca. 1,3 x 1,4 x 1,5 mxmxm︱
          straightening machine make Dreher, type 1675 BV, yom 1978 new electrical cabinet 1995 with infinitely variable drive, adjustment of roller cassette manually, coil loop control via infrared decoiler make Dreher, type 2350 BF, yom 1988 not driven, with lag brake, manual centralized expansion, band limiting brackets, attachment jaw pieces for extending the inner diameter by 100 mm (from 420 to 520 mm)
            material width 300 mm
            coil weight 1,25 t
            material thickness 0,2 - 3,5 mm
            coil internal diameter 320 - 420 (520) mm
            coil external diameter 1300 mm
            material cross-cut 3,5x50 / 2,5x300 mm²
            no. of straightening rolls 7
            straightening roll diameter 60 mm
            number of draw-in rolls 2+2
            power requirement 2,0 kW
            Weight 0,45 + 0,4 t
            dimensions of the machine ca. 1,2 x 1,3 x 1,5 mxmxm
            dimensions of the machine ca. 1,3 x 1,4 x 1,5 mxmxm
            Description :
            straightening machine make Dreher, type 1675 BV, yom 1978
            new electrical cabinet 1995
            with infinitely variable drive, adjustment of roller cassette manually, coil loop control via infrared

            decoiler make Dreher, type 2350 BF, yom 1988
            not driven, with lag brake, manual centralized expansion, band limiting brackets, attachment jaw pieces for extending the inner diameter by 100 mm (from 420 to 520 mm)


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine SCHLEICHER RMS 8-53/160-800 / HE 200-1000


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133017 · decoiler straightening machine

          SCHLEICHER - RMS 8-53/160-800 / HE 200-1000 - - 1987 - Siemens S 5

          Technical details
          material width 800 mm︱coil weight 12,0 t︱coil internal diameter 470 - 520 mm︱coil external diameter 1500 mm︱material thickness 0,4 - 2,5 mm︱no. of straightening rolls 8 ︱straightening roll diameter 53 mm︱number of draw-in rolls 2 ︱inlet roll diameter 160 mm︱speed 35 m/min︱material thickness at 150 mm material width 2,5 mm︱material thickness at 650 mm material width 1,5 mm︱material thickness at 800 mm material width 1,0 mm︱power requirement kW︱weight t︱dimensions straightener (WxDxH) mm︱dimensions decoiler (WxDxH) mm︱
          Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet Decoiler HE 200-1000 with auxiliary drive, pneumatic lag brake, hydraulic snubber roll, hydraulic expansion, motoric movable hydraulic coil lifting device coil loop control via light guard can be offered without putting into operation, with putting into operation or alternatively with new control
            material width 800 mm
            coil weight 12,0 t
            coil internal diameter 470 - 520 mm
            coil external diameter 1500 mm
            material thickness 0,4 - 2,5 mm
            no. of straightening rolls 8
            straightening roll diameter 53 mm
            number of draw-in rolls 2
            inlet roll diameter 160 mm
            speed 35 m/min
            material thickness at 150 mm mat. 2,5 mm
            material thickness at 650 mm mat. 1,5 mm
            material thickness at 800 mm mat. 1,0 mm
            Description :
            Straightening machine RM 8-53/160-800
            with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet
            Decoiler HE 200-1000
            with auxiliary drive, pneumatic lag brake, hydraulic snubber roll, hydraulic expansion, motoric movable
            hydraulic coil lifting device
            coil loop control via light guard
            can be offered without putting into operation, with putting into operation or alternatively with new control


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine ARKU RM 5050.4/9  /  AH 2000/2/M


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123056 · decoiler straightening machine

          ARKU - RM 5050.4/9 / AH 2000/2/M - - 1986 - konventionell

          Technical details
          material width 500 mm︱coil weight 2 x 2,0 t︱material thickness 1,0 - 6,0 mm︱coil internal diameter 350 - 420 mm︱coil external diameter 1600 mm︱no. of straightening rolls 9 ︱straightening roll diameter 50 mm︱number of draw-in rolls 2 ︱speed 0 - 40 m/min︱material thickness at 500 mm material width 3,5 mm︱power requirement 17,5 kW︱Weight t︱Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m︱
          - Straightening machine RM 5050.4/9 with infinitely variable drive, supporting rolls - Double decoiler AH 2000/2/M with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm machine is in running function in our warehouse
            material width 500 mm
            coil weight 2 x 2,0 t
            material thickness 1,0 - 6,0 mm
            coil internal diameter 350 - 420 mm
            coil external diameter 1600 mm
            no. of straightening rolls 9
            straightening roll diameter 50 mm
            number of draw-in rolls 2
            speed 0 - 40 m/min
            material thickness at 500 mm mat. 3,5 mm
            power requirement 17,5 kW
            Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m
            Description :
            - Straightening machine RM 5050.4/9
            with infinitely variable drive, supporting rolls
            - Double decoiler AH 2000/2/M
            with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm
            machine is in running function in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine WANZKE HRS 2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223014 · decoiler straightening machine

          WANZKE - HRS 2 - - 1985 - konventionell

          Technical details
          material width 500 mm︱coil weight 1,0 t︱material thickness 0,4 - 5,0 mm︱coil internal diameter 420 - 520 mm︱coil external diameter 1200 mm︱material cross-cut 1500 mm²︱no. of straightening rolls 9 ︱straightening roll diameter mm︱number of draw-in rolls 2 ︱roll diameter mm︱speed 0 - 80 m/min︱power requirement kW︱Weight 1,70 t︱Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m︱Weight 1,35 t︱dimensions 2,2 x 1,2 x 2,0 m︱
          Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll
            material width 500 mm
            coil weight 1,0 t
            material thickness 0,4 - 5,0 mm
            coil internal diameter 420 - 520 mm
            coil external diameter 1200 mm
            material cross-cut 1500 mm²
            no. of straightening rolls 9
            number of draw-in rolls 2
            speed 0 - 80 m/min
            Weight 1,70 t
            Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m
            Weight 1,35 t
            dimensions 2,2 x 1,2 x 2,0 m
            Description :
            Straightening machine
            with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge
            Decoiler
            with auxiliary drive, hydraulic centralized expansion, snubber roll


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine WANZKE HRS 1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083209 · decoiler straightening machine

          WANZKE - HRS 1 - - 1984 - konventionell

          Technical details
          material width 300 mm︱coil weight 0,5 t︱material thickness 0,4 - 3,0 mm︱coil internal diameter 420 - 520 mm︱coil external diameter 1200 mm︱no. of straightening rolls 9 ︱straightening roll diameter 50 mm︱number of draw-in rolls 2 ︱diameter of draw-in rolls 50 mm︱power requirement 1,5 kW︱weight 1,55 t︱dimensions (WxDxH) 2,5 x 1,2 x 1,8 m︱
          with manual expansion
            material width 300 mm
            coil weight 0,5 t
            material thickness 0,4 - 3,0 mm
            coil internal diameter 420 - 520 mm
            coil external diameter 1200 mm
            no. of straightening rolls 9
            straightening roll diameter 50 mm
            number of draw-in rolls 2
            diameter of draw-in rolls 50 mm
            power requirement 1,5 kW
            weight 1,55 t
            dimensions (WxDxH) 2,5 x 1,2 x 1,8 m
            Description :
            with manual expansion


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine KOHLER 45.350/9-500.1


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20003 · decoiler straightening machine

          KOHLER - 45.350/9-500.1 - - 1981 -

          Technical details
          material width 350 mm︱coil weight 500 kg︱material thickness mm︱coil external diameter 1000 mm︱no. of straightening rolls 9 ︱straightening roll diameter 45 mm︱speed m/min︱power requirement 9 kW︱Weight - t︱Dimensions (WxDxH) - m︱
          Decoiler and straightener on one base plate - Straightening machine - decoiler - Control panel
            material width 350 mm
            coil weight 500 kg
            coil external diameter 1000 mm
            no. of straightening rolls 9
            straightening roll diameter 45 mm
            power requirement 9 kW
            Weight - t
            Dimensions (WxDxH) - m
            Description :
            Decoiler and straightener on one base plate
            - Straightening machine
            - decoiler
            - Control panel


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine SCHULER LH 2-1,5-500 / R 500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163102 · decoiler straightening machine

          SCHULER - LH 2-1,5-500 / R 500 - - 1978 - konventionell

          Technical details
          material width 500 mm︱coil weight 6,5 t︱material thickness 0,5 - 1,5 mm︱coil internal diameter 420 - 560 mm︱coil external diameter 1500 mm︱no. of straightening rolls 17 ︱straightening roll diameter 50 mm︱number of draw-in rolls 4 ︱speed 6 - 60 m/min︱power requirement kW︱Weight of the straigthening machine (W+DxH t︱Weight of the decoiler (WxDxH) t︱dimensions of the straightener (WxDxH) 2,3 x 1,3 x 1,7 m︱dimensions of the decoiler (WxDxH) 1,3 x 1,2 x 2,0 m︱
          straightener (type R 500) with infinitely variable drive, adjustment of the roller box manual centralized double decoiler (type LH 2-1,5-500) with hydraulic centralized expansion, hydro-mechanical lag break
            material width 500 mm
            coil weight 6,5 t
            material thickness 0,5 - 1,5 mm
            coil internal diameter 420 - 560 mm
            coil external diameter 1500 mm
            no. of straightening rolls 17
            straightening roll diameter 50 mm
            number of draw-in rolls 4
            speed 6 - 60 m/min
            dimensions of the straightener (. 2,3 x 1,3 x 1,7 m
            dimensions of the decoiler (WxDx. 1,3 x 1,2 x 2,0 m
            Description :
            straightener (type R 500) with infinitely variable drive, adjustment of the roller box manual centralized
            double decoiler (type LH 2-1,5-500)
            with hydraulic centralized expansion, hydro-mechanical lag break


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine SCHLEICHER RM-S 300 / H 2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113126 · decoiler straightening machine

          SCHLEICHER - RM-S 300 / H 2 - - 1971 - konventionell

          Technical details
          material width 300 mm︱coil weight 2,0 t︱material thickness 1,0 - 5,0 mm︱coil internal diameter 440 - 520 mm︱coil external diameter 1320 mm︱no. of straightening rolls 6 ︱straightening roll diameter 70 mm︱number of draw-in rolls 2 ︱diameter of draw-in rolls 70 mm︱material cross-cut mm²︱speed m/min︱power requirement 1,1 kW︱weight of decoiler 2,0 t︱dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm︱weight of straightening machine 1,3 t︱dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm︱
          Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable can be offered without or with putting into operation in given condition
            material width 300 mm
            coil weight 2,0 t
            material thickness 1,0 - 5,0 mm
            coil internal diameter 440 - 520 mm
            coil external diameter 1320 mm
            no. of straightening rolls 6
            straightening roll diameter 70 mm
            number of draw-in rolls 2
            diameter of draw-in rolls 70 mm
            power requirement 1,1 kW
            weight of decoiler 2,0 t
            dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm
            weight of straightening machine 1,3 t
            dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm
            Description :
            Straightening machine RM-S 300
            with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control
            Decoiler H 2
            with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Laser Cutting Machine

          used Sheet metal working / shaeres / bending Laser Cutting Machine ERMAK FIBERMAK RAPTOR 6KW


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2500026 · Laser Cutting Machine

          ERMAK - FIBERMAK RAPTOR 6KW - - NEU - CNC

          Technical details
          table length 3000 mm︱table width 1500 mm︱burner heads 1 ︱Control CNC ︱workpiece weight 1500 kg︱total power requirement 21 kW︱weight of the machine ca. 10,4 t︱dimensions of the machine ca. 5,2 x 4,2 x 2,62 m︱
          CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM
            table length 3000 mm
            table width 1500 mm
            burner heads 1
            Control CNC
            workpiece weight 1500 kg
            total power requirement 21 kW
            weight of the machine ca. 10,4 t
            dimensions of the machine ca. 5,2 x 4,2 x 2,62 m
            Description :
            CUTTING CAPACITY:
            STRUCTURAL STEEL 25 mm
            STAINLESS STEEL 15 mm
            ALUMINUM 12mm
            BRASS 8mm
            COPPER 8mm

            MACHINE AXES: 4 axes [X, Y, Z, U ]
            CUTTING HEAD: Precitec ProCutter
            CAD/CAM SOFTWARE: LANTEK EXPERT CUT

            *4 servo motors for all axial movements
            *CNC CONTROL PANEL 15 5” touch screen
            *IPG laser sources and coolers integrated
            *Precitec Procutter cutting head system
            *AIR FILTER (compressed air filter)
            *CONVEYOR BELT under cutting area
            *Closed housing and specially coated filter protection windows
            *LOADING / DISCHARGING SYSTEM
            *PROPORTIONAL GAS AND PIPE SYSTEM


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine ERMAK FIBERMAK SM 6000.3 x 1,5


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7286 · Laser Cutting Machine

          ERMAK - FIBERMAK SM 6000.3 x 1,5 - - NEU -

          Technical details
          table length 3000 mm︱table width 1500 mm︱burner heads Precitec ProCutter ︱laser capacity in Watt 6000 ︱x-axis 3050 mm︱z-axis 150 mm︱y-axis 1550 mm︱total power requirement 21 kW︱dimensions 9190 x 3710 x 2200 mm︱weight of the machine ca. 11200 kg︱
          Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - max.load 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration
            table length 3000 mm
            table width 1500 mm
            burner heads Precitec ProCutter
            laser capacity in Watt 6000
            x-axis 3050 mm
            z-axis 150 mm
            y-axis 1550 mm
            total power requirement 21 kW
            dimensions 9190 x 3710 x 2200 mm
            weight of the machine ca. 11200 kg
            Description :
            Furnishing:
            - Resonator Ytterbium YLS 4000 compact
            - Beckhoff controller
            - Precitec ProCutter Automatic cutting head
            - autom. Lubrication system

            - CAD / CAM software LANTEK EXPERT CUT
            - 17 "touchscreen, keyboard, control panel
            - Collective conveyor under the cutting table
            - additional loading unit

            Cutting capacities:
            - normal steel 25 mm
            - stainless steel 15 mm
            - aluminum 12 mm
            - brass 8 mm
            - copper 8 mm

            Axes:
            - Machine axes: 4 axes (X, Y, Z, U)
            - max.axis speed: 100 m / min (simulated)
            - Axis speed X / Y: 100 m / min (single)
            - Positioning accuracy: + - 0.03 mm / min
            - Burning height: 125 - 200 mm

            Loading table:
            - Number of pieces 2 (35 seconds for changing)
            - automatic change of tables
            - max.load 2,500 kg.

            assisting gases:
            - mild steel - oxygen (0.5 - 25 bar)
            - stainless steel - nitrogen (0.5 - 25 bar)
            - Aluminum - compressed air or nitrogen (0.5 - 25 bar)

            including:
            - Compatible suction system
            - Sick light barrier safety device
            - Spare part basic supply package

            Why Fibermak?
            - Up to 3 times faster cutting compared to other laser technologies
            - Machines for cutting thin sheets
            - axes equipped with linear motors /
            Servo motors reach up to 141 m / min.
            - Accelerations up to 2G
            - Fiber laser is the green laser technology
            (Saving of at least 50% energy costs)
            - There is no need for laser gas mixing
            - There is no need for optical
            Components / therefore very low-maintenance
            - Save up to 50% per part through more efficient production
            - Extended options: cutting from
            reflective materials
            like aluminum, copper, brass etc.,
            - In addition, precise cuts and smooth surface quality
            - Heavy-duty constructed frame, equipped
            with world-famous, durable, high-quality components
            - ERMAK passes the price advantage on to its customers
            thanks to its fast and high quality production
            - Creative design, constant, highest technology and quality
            - High reliability
            - High efficiency
            - High quality
            - CE declaration


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine ERMAK FIBERMAK SM 4000.3 x 1,5


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7255 · Laser Cutting Machine

          ERMAK - FIBERMAK SM 4000.3 x 1,5 - - NEU -

          Technical details
          table length 3000 mm︱table width 1500 mm︱burner heads Precitec ProCutter ︱laser capacity in Watt 4000 ︱x-axis 3050 mm︱z-axis 150 mm︱y-axis 1550 mm︱total power requirement 22 kW︱dimensions 9190 x 3710 x 2200 mm︱weight of the machine ca. 11200 kg︱
          Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration
            table length 3000 mm
            table width 1500 mm
            burner heads Precitec ProCutter
            laser capacity in Watt 4000
            x-axis 3050 mm
            z-axis 150 mm
            y-axis 1550 mm
            total power requirement 22 kW
            dimensions 9190 x 3710 x 2200 mm
            weight of the machine ca. 11200 kg
            Description :
            Furnishing:
            - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm
            - Ytterbium YLS 4000 compact resonator (4 kW)
            - PRECITEC PROCUTTER laser cutting head
            - CAD / CAM software BECKHOFF - Controller CP 6242
            - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard
            - Collective conveyor under the cutting table
            - additional loading unit

            Cutting capacities:
            - normal steel ... 20 mm
            - stainless steel ... 12 mm
            - aluminum ... 10 mm
            - brass ... 6.0 mm
            - Copper ... 5.0 mm

            Workspace:
            - max .: 3,000 x 1,500 mm

            Axes:
            - Machine axes: 4 axes (X, Y, Z, U)
            - max.axis speed: 100 m / min (simulated)
            - Axis speed X / Y: 100 m / min (single)
            - Positioning accuracy: + - 0.03 mm / min
            - Burning height: 125 - 200 mm

            Loading table:
            - Number of pieces 2 (35 seconds for changing)
            - automatic change of tables

            assisting gases:
            - mild steel - oxygen (0.5 - 25 bar)
            - stainless steel - nitrogen (0.5 - 25 bar)
            - Aluminum - compressed air or nitrogen (0.5 - 25 bar)

            included :
            - Compatible suction system
            - Light barrier safety device
            - Spare part basic supply package

            Why Fibermak / Fiberlaser?
            - Up to 3 times faster cutting compared to other laser technologies
            - Machines for cutting thin sheets
            - Axis speed: reach up to 141 m / min.
            - Accelerations up to 2G
            - Fiber laser is the green laser technology
            - Saving of at least 50% energy costs)
            - There is no need for laser gas mixing
            - There is no need for optical components
            - therefore, among other things, very low-maintenance
            - Save up to 50% per part through more efficient production
            - Extended options: cutting reflective materials
            * like aluminum, copper, brass etc.,
            - In addition, precise cuts and smooth surface quality
            - Heavy-duty constructed frame
            - equipped with world-famous, durable, high-quality components
            - Creative design, constant, highest technology and quality
            - High reliability
            - High efficiency
            - High quality
            - CE declaration


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine DURMA FL-3015-L-6kW


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92160 · Laser Cutting Machine

          DURMA - FL-3015-L-6kW - - 2019 -

          Technical details
          table length 3050 mm︱table width 1530 mm︱burner heads 0 ︱thickness at "Niro-steel" 24 mm︱plate thickness alu 14 mm︱working area 3050 x 1530 mm︱stroke z-axis 130 mm︱speed y-axis 170 mm/min︱speed z-axis 50 mm/min︱positioning accuracy 0,05 mm︱repeating accuracy 0,02 mm︱total power requirement 75 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. m︱
          demonstration machine FANUC 6000 W fiber laser source, automat. beam centering, DENER Smart Nest, Air Dryer, DENER Filter, Camera & Surveillance, air-conditioned control cabinet, Precitec Procutter cutting head, shuttle table, automatic nozzle cleaning, central lubrication, scrap pan for small parts etc. dirt, METALIX Pronest automatic nesting, multi-chamber suction system, warning lamp
            table length 3050 mm
            table width 1530 mm
            thickness at "Niro-steel" 24 mm
            plate thickness alu 14 mm
            working area 3050 x 1530 mm
            stroke z-axis 130 mm
            speed y-axis 170 mm/min
            speed z-axis 50 mm/min
            positioning accuracy 0,05 mm
            repeating accuracy 0,02 mm
            total power requirement 75 kW
            weight of the machine ca. 16 t
            Description :
            demonstration machine
            FANUC 6000 W fiber laser source, automat. beam centering,
            DENER Smart Nest, Air Dryer, DENER Filter, Camera & Surveillance,
            air-conditioned control cabinet, Precitec Procutter cutting head, shuttle table,
            automatic nozzle cleaning, central lubrication, scrap pan for small parts etc.
            dirt, METALIX Pronest automatic nesting, multi-chamber suction system,
            warning lamp


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine Amada Ensis AJ 6kW


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3211 · Laser Cutting Machine

          Amada - Ensis AJ 6kW - - 2019 -

          Technical details
          Working hours machine 19744 (17.01.2024) h︱Working hours beam on 6018 (17.01.2024) h︱Laser power 6000 Watt︱Control AMNC 3i ︱Length 10136 mm︱Width 2840 mm︱Machine weight 9500 kg︱
            Working hours machine 19744 (17.01.2024) h
            Working hours beam on 6018 (17.01.2024) h
            Laser power 6000 Watt
            Control AMNC 3i
            Length 10136 mm
            Width 2840 mm
            Machine weight 9500 kg
            Description :


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine TRUMPF TruLaser 5030 Fiber (L68)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100512 · Laser Cutting Machine

          TRUMPF - TruLaser 5030 Fiber (L68) - - 2018 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 6000 W︱Movement Z 115 mm︱X-Y speed simult, max 235 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 25 mm︱Plate thickness Al. max. 25 mm︱Laser-Typ TruDisk 6001 -︱main switch on 27152 Std.︱time resonator beam on 13434 Std.︱time laser stand by 27325 Std.︱Plate thickness Co. max. 10 mm︱
          The machine is in good condition. 1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty: Surcharge 14.800 € plus Transport and traveling costs 2. Option: Workshop refurbished machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 38.300 € plus Transport and traveling costs. Delivery time +6 weeks. Standardequipment machine: - closed machine frame with integrated laser unit, - movement unit for highly accurate processing, - Toryue-drive in combination with linear direct drive, - closed beam line, - a cutting head strategy, - cooling unit, - automatic pallet-changer in the longitudinal direction, - Conveyor, - 17" touch colour screen, - Work space lighting, - position laser diode, - spray device, - PierceLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - ControlLine Control - workshop programming, - simple workshop programming dir. Of DXF, - integrated technology files, - shutdown, - production plan, - programmable cutting gas pressure selection, - SprintLine, - ContourLine, - Microweld, - FastLine, - AdjustLine, - Teleservice, - diagnostic functions, - online-help, - FlyLine Date transmission - USB-interface, - RJ-45 network, Safety - CE-identification, - light barriers, - laser monitoring system, - more chambers extraction plant, - compact dust, - machine-cladding with Makrolon panels
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 6000 W
            Movement Z 115 mm
            X-Y speed simult, max 235 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 25 mm
            Plate thickness Al. max. 25 mm
            Laser-Typ TruDisk 6001 -
            main switch on 27152 Std.
            time resonator beam on 13434 Std.
            time laser stand by 27325 Std.
            Plate thickness Co. max. 10 mm
            Description :
            The machine is in good condition.
            1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty:
            Surcharge 14.800 € plus Transport and traveling costs

            2. Option: Workshop refurbished machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 38.300 € plus Transport and traveling costs. Delivery time +6 weeks.

            Standardequipment machine:

            - closed machine frame with integrated laser unit,
            - movement unit for highly accurate processing,
            - Toryue-drive in combination with linear direct drive,
            - closed beam line,
            - a cutting head strategy,
            - cooling unit,
            - automatic pallet-changer in the longitudinal direction,
            - Conveyor,
            - 17" touch colour screen,
            - Work space lighting,
            - position laser diode,
            - spray device,
            - PierceLine,
            - NitroLine,
            - PlasmaLine

            Cutting head
            - LensLine,
            - Lens cutting head with 250mm focal length,
            - ControlLine

            Control
            - workshop programming,
            - simple workshop programming dir. Of DXF,
            - integrated technology files,
            - shutdown,
            - production plan,
            - programmable cutting gas pressure selection,
            - SprintLine,
            - ContourLine,
            - Microweld,
            - FastLine,
            - AdjustLine,
            - Teleservice,
            - diagnostic functions,
            - online-help,
            - FlyLine

            Date transmission
            - USB-interface,
            - RJ-45 network,


            Safety
            - CE-identification,
            - light barriers,
            - laser monitoring system,
            - more chambers extraction plant,
            - compact dust,
            - machine-cladding with Makrolon panels


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine Trumpf TruLaser 3030 - 3kW Fiber


          • PTF GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 93 622 83
            +49 7574 92 17 24
          • info@ptf-maschinen.de
            www.ptf-maschinen.de
          #2054-3188 · Laser Cutting Machine

          Trumpf - TruLaser 3030 - 3kW Fiber - - 2017 -

          Technical details
          Working hours beam on 18905 (09/2023) h︱Laser power 3000 Watt︱Length 9350 mm︱Width 4600 mm︱Machine weight 12000 kg︱
            Working hours beam on 18905 (09/2023) h
            Laser power 3000 Watt
            Length 9350 mm
            Width 4600 mm
            Machine weight 12000 kg


        • PTF GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Laser Cutting Machine AMADA FO-3015 NT II


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7032 · Laser Cutting Machine

          AMADA - FO-3015 NT II - - 2016 - AMNC Multi 3i Media

          Technical details
          table length 3.070 mm︱table width 1.550 mm︱table height 200 mm︱Control AMNC Multi 3i Media ︱laser capacity in Watt 4000 W︱material diameter structural steel 25 mm︱material diameter stainless steel 15 mm︱material diameter aluminium 12 mm︱total power requirement 72 kW︱weight of the machine ca. 9,5 + 12,7 t︱dimensions of the machine ca. 10,7 x 6,3 x 5,5 m︱
          AMNC Multi 3i media control 4000 Watt continuous laser power ASLUL 300 FO-MII loading tower 3-axis drive Cutting grid support AMADA/FANUC beam source Flying optics principle Adaptive optics WACS cutting area cooling Oil spraying device Cutting process monitoring incl. sensor cutting head incl. quick lens change system incl. quick-change nozzle system incl. 7.5" lens holder incl. 7.5" cutting lens incl. NC cutting gas pressure control incl. NC focus position control incl. Cleancut high-pressure cutting function incl. aluminium cutting function Alucut incl. travel protection according to CE incl. 8-fold nozzle changer TG 513 transformer Combi cooler - suction unit Jet path rinsing Laser water treatment kit Water demineraliser type B5 with cartridge and conductivity meter Silky-Cut option in stainless steel incl. 10" lens and holder 5.0" lens and lens holder BLANK Solution package - 1 licence AP100BM Unfold & 3D Modific. - Dr ABE BLANK + all technology modules - Production Designer - USB Dongle Operating hours: 59700 h
            table length 3.070 mm
            table width 1.550 mm
            table height 200 mm
            Control AMNC Multi 3i Media
            laser capacity in Watt 4000 W
            material diameter structural ste. 25 mm
            material diameter stainless stee. 15 mm
            material diameter aluminium 12 mm
            total power requirement 72 kW
            weight of the machine ca. 9,5 + 12,7 t
            dimensions of the machine ca. 10,7 x 6,3 x 5,5 m
            Description :
            AMNC Multi 3i media control
            4000 Watt continuous laser power
            ASLUL 300 FO-MII loading tower
            3-axis drive
            Cutting grid support
            AMADA/FANUC beam source
            Flying optics principle
            Adaptive optics
            WACS cutting area cooling
            Oil spraying device
            Cutting process monitoring
            incl. sensor cutting head
            incl. quick lens change system
            incl. quick-change nozzle system
            incl. 7.5" lens holder
            incl. 7.5" cutting lens
            incl. NC cutting gas pressure control
            incl. NC focus position control
            incl. Cleancut high-pressure cutting function
            incl. aluminium cutting function Alucut
            incl. travel protection according to CE
            incl. 8-fold nozzle changer
            TG 513 transformer
            Combi cooler - suction unit
            Jet path rinsing
            Laser water treatment kit
            Water demineraliser type B5 with cartridge and conductivity meter
            Silky-Cut option in stainless steel incl. 10" lens and holder
            5.0" lens and lens holder
            BLANK Solution package
            - 1 licence AP100BM Unfold & 3D Modific.
            - Dr ABE BLANK + all technology modules
            - Production Designer
            - USB Dongle
            Operating hours: 59700 h


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •