'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Punching Press

          Machinelist: Punching Press


          Punching Press

          used Sheet metal working / shaeres / bending Punching Press GREENLEE 7646


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003014 · Punching Press

          GREENLEE - 7646 - - unbekannt/unknown -

          Technical details
          pressure 11 t︱punching cross-cut in cmm diverse ︱stroke 50 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          hydraulic punching press With 3 punching tools.
            pressure 11 t
            punching cross-cut in cmm diverse
            stroke 50 mm
            Description :
            hydraulic punching press
            With 3 punching tools.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press GEKA PUMA 110 S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050848 · Punching Press

          GEKA - PUMA 110 S - - NEU -

          Technical details
          pressure 110 t︱ Ø 40x20 mm ︱throat 500 mm︱engine output 9 kW︱no. of strokes 28 Hub/min︱stroke max. 80 mm︱weight 3150 kg︱
          Accessories / equipment: - punching table
            pressure 110 t
            Ø 40x20 mm
            throat 500 mm
            engine output 9 kW
            no. of strokes 28 Hub/min
            stroke max. 80 mm
            weight 3150 kg
            Description :
            Accessories / equipment:
            - punching table


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press GEKA PUMA 55 S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050846 · Punching Press

          GEKA - PUMA 55 S - - NEU -

          Technical details
          pressure 55 t︱hole diameter in sheet thickness Ø 40 in 10 mm︱throat 500 mm︱stroke 60 mm︱ 38 /min.︱engine output 5 kW︱ 20x20 mm︱ 28x11 mm︱Overall size 1500x1100x2000 mm︱weight of the machine ca. 1.150 kg︱
          Accessories / equipment: - punching table
            pressure 55 t
            hole diameter in sheet thickness Ø 40 in 10 mm
            throat 500 mm
            stroke 60 mm
            38 /min.
            engine output 5 kW
            20x20 mm
            28x11 mm
            Overall size 1500x1100x2000 mm
            weight of the machine ca. 1.150 kg
            Description :
            Accessories / equipment:
            - punching table


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press GEKA PUMA 80 S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050847 · Punching Press

          GEKA - PUMA 80 S - - NEU -

          Technical details
          stroke 70 mm︱work height max. 1094 mm︱throat 500 mm︱ 40 in 14 mm︱no. of strokes 20 Hub/min︱throat 500 mm︱ 80 to︱engine output 9 kW︱range L-W-H 1980x1150x2000 mm︱weight 2000 kg︱
          Accessories / equipment: - punching table
            stroke 70 mm
            work height max. 1094 mm
            throat 500 mm
            40 in 14 mm
            no. of strokes 20 Hub/min
            throat 500 mm
            80 to
            engine output 9 kW
            range L-W-H 1980x1150x2000 mm
            weight 2000 kg
            Description :
            Accessories / equipment:
            - punching table


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press GEKA P.P. 50 - Modell G


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10037 · Punching Press

          GEKA - P.P. 50 - Modell G - - Neu -

          Technical details
          500 kN︱hole diameter in sheet thickness Ø 27 in 13 / Ø 28 in 10 mm︱no. of strokes 23 Hub/min︱throat 130 mm︱stroke 30 mm︱total power requirement 3 kW︱weight of the machine ca. 295 kg︱Overall size 1100x900x1550 mm︱
          Standard equipment: - punching table
            500 kN
            hole diameter in sheet thickness Ø 27 in 13 / Ø 28 in 10 mm
            no. of strokes 23 Hub/min
            throat 130 mm
            stroke 30 mm
            total power requirement 3 kW
            weight of the machine ca. 295 kg
            Overall size 1100x900x1550 mm
            Description :
            Standard equipment:
            - punching table


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press GEKA PUMA 55 SD


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051368 · Punching Press

          GEKA - PUMA 55 SD - - NEU -

          Technical details
          pressure 55 t︱hole diameter in sheet thickness Ø 40 in 10 mm︱throat 750 mm︱stroke 60 mm︱ 38 Hub/min︱engine output 5 kW︱weight of the machine ca. 1.885 kg︱Overall size 1500x1100x2000 mm︱
          Accessories / equipment: - punching table
            pressure 55 t
            hole diameter in sheet thickness Ø 40 in 10 mm
            throat 750 mm
            stroke 60 mm
            38 Hub/min
            engine output 5 kW
            weight of the machine ca. 1.885 kg
            Overall size 1500x1100x2000 mm
            Description :
            Accessories / equipment:
            - punching table


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press MUBEA HP 1000/760


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051718 · Punching Press

          MUBEA - HP 1000/760 - - 2006 -

          Technical details
          100 t︱diameter 40 mm︱throat 760 mm︱total power requirement 8,5 kW︱weight 3.600 kg︱
          Accessories / equipment: - punching table
            100 t
            diameter 40 mm
            throat 760 mm
            total power requirement 8,5 kW
            weight 3.600 kg
            Description :
            Accessories / equipment:
            - punching table


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press GEKA PUMA 110


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5669 · Punching Press

          GEKA - PUMA 110 - - 2005 -

          Technical details
          pressure 110 t︱punching cross-cut in cmm Ø 40x20 mm︱stroke 80 mm︱strokes per minute 28 ︱throat 500 mm︱total power requirement 9 kW︱weight of the machine ca. 3,3 t︱
          Hole punch / automatic punching machine GEKA with multiple tools (triple punching) Punching performance: Ø 40 x 20 mm Ø 28 x 28 mm - 28x20mm Accesories: - Roller conveyor with stop (feed unit PAX)
            pressure 110 t
            punching cross-cut in cmm Ø 40x20 mm
            stroke 80 mm
            strokes per minute 28
            throat 500 mm
            total power requirement 9 kW
            weight of the machine ca. 3,3 t
            Description :
            Hole punch / automatic punching machine GEKA with multiple tools (triple
            punching)

            Punching performance:
            Ø 40 x 20 mm
            Ø 28 x 28 mm
            - 28x20mm


            Accesories:
            - Roller conveyor with stop (feed unit PAX)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press MUBEA KL 350 / 230


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051751 · Punching Press

          MUBEA - KL 350 / 230 - - 2000 -

          Technical details
          plate thickness 9 mm︱Punching capacity 350 kN︱frequency 50 Hz︱rated current 3,6 A︱connected load frequency 400 V︱weight 330 kg︱
            plate thickness 9 mm
            Punching capacity 350 kN
            frequency 50 Hz
            rated current 3,6 A
            connected load frequency 400 V
            weight 330 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press BOSCHERT EL 500 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412165 · Punching Press

          BOSCHERT - EL 500 Digital - - 1999 -

          Technical details
          sheet width 500 mm︱plate length 1000 mm︱plate thickness max. 6,0 mm︱pressure 28,0 t︱throat 500 mm︱height of stroke 0 - 40 mm︱working area X = 1200 mm︱working area Y = 570 mm︱no. of strokes max. 180 Hub/min︱punch diameter max. 105 mm︱work height max. 900 mm︱oil volume 50 l︱total power requirement 4,0 kW︱weight of the machine ca. 2500 kg︱range L-W-H 2400 x 1580 x 1540 mm︱
          ** New price including accessories approx. 30.000 euros ** Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y positioned accordingly and the material pushed to the stops. Through Pressing the foot pedal will then punch the hole Features of the machine: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Furnishing: - robust electro-hydraulic hole punch - TRUMPF tool system with many application tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * scanning head integrated in the stops * Energy chains for supply cable to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Staking device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single and continuous stroke - stepless lifting height adjustment - 1x pallet/box with application tools - freely movable foot switch * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412165
            sheet width 500 mm
            plate length 1000 mm
            plate thickness max. 6,0 mm
            pressure 28,0 t
            throat 500 mm
            height of stroke 0 - 40 mm
            working area X = 1200 mm
            working area Y = 570 mm
            no. of strokes max. 180 Hub/min
            punch diameter max. 105 mm
            work height max. 900 mm
            oil volume 50 l
            total power requirement 4,0 kW
            weight of the machine ca. 2500 kg
            range L-W-H 2400 x 1580 x 1540 mm
            Description :
            ** New price including accessories approx. 30.000 euros
            ** Special price on request

            The hydraulic punching machine ECCO LINE is specially designed for processing
            Sheet metal and profile parts have been optimized. She stands out for her
            Flexibility and manufacturing precision. The machines in the ECCO series
            LINE are equipped with 28 t punching force in conjunction with the proven
            Trumpf tool system. Tool change time approx. 15 seconds (manually)

            How it works: After installing the tool, the stops are in X and Y
            positioned accordingly and the material pushed to the stops. Through
            Pressing the foot pedal will then punch the hole

            Features of the machine:
            • Maintenance-free hydraulic drive
            • Infinitely variable stroke adjustment
            • Compact unit
            • Constant punching force

            Furnishing:
            - robust electro-hydraulic hole punch
            - TRUMPF tool system with many application tools
            - Stop system with digital displays
            * Magnetic scale integrated into the side of the machine table
            * scanning head integrated in the stops
            * Energy chains for supply cable to the scanning head
            * Evaluation electronics
            * Position indicators mounted on the stops
            * Staking device for zeroing the axes
            * Reading accuracy +/- 0.1 mm
            - Control panel: setup, single and continuous stroke
            - stepless lifting height adjustment
            - 1x pallet/box with application tools
            - freely movable foot switch

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412165


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press SIMASV AF 204/P (Ausklink-)


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12343 · Punching Press

          SIMASV - AF 204/P (Ausklink-) - - 1996 -

          Technical details
          pressure - t︱punching cross-cut in cmm - ︱stroke 20 mm︱plate thickness 4 mm︱blade length 205 mm︱table-size 700 x 825 mm︱cutting capacity stainless steel 3 mm︱throat 300 mm︱strokes 50 p. min.︱oil tank 35 l︱total power requirement 3 kW︱weight of the machine ca. 720 t︱dimensions of the machine ca. 0,7 x 0,83 x 1,1 m︱Electric 380 Volt ︱Hole punching device ︱Foot switch ︱Support arms ︱Squaring arm withh mm-scale ︱Puch tools ( diverse ) ︱CE signed
          Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and burr-free cuts are achieved with optimal protection the knife. When using the punching head, the cutting head is raised, the punching head mounted and it can be punched with a projection of up to 300 mm and a maximum of 30 x 3 mm. The machine is practically maintenance-free and the cutting area is with shatterproof, transparent plastic. The cutting performance relates has a strength of 420 N/mm². The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².
            pressure - t
            punching cross-cut in cmm -
            stroke 20 mm
            plate thickness 4 mm
            blade length 205 mm
            table-size 700 x 825 mm
            cutting capacity stainless steel 3 mm
            throat 300 mm
            strokes 50 p. min.
            oil tank 35 l
            total power requirement 3 kW
            weight of the machine ca. 720 t
            dimensions of the machine ca. 0,7 x 0,83 x 1,1 m
            Description :
            Fixed angle hydraulic punching/nothing machine, more automatic cutting gap
            regulation and HOLE PUNCHING HEAD.
            The cutting head is guided stably in guide columns over the entire stroke
            length, so that an exact cut is always made. The cutting angle is negative, i.e.
            the knives cut from front to back. This means the sheet metal cannot bend
            move forward. The automatic cutting gap adjustment (patented) works
            over the lower blades (therefore no tipping of the cutting head and abrasion of
            the knife tips) and burr-free cuts are achieved with optimal protection
            the knife. When using the punching head, the cutting head is raised, the
            punching head mounted and it can be punched with a projection of up to 300 mm
            and a maximum of 30 x 3 mm.
            The machine is practically maintenance-free and the cutting area is with
            shatterproof, transparent plastic. The cutting performance relates
            has a strength of 420 N/mm².
            The machine was used in a well-kept small business for the production of
            stainless steel special parts are used for kitchens, laboratories and clinics
            and were only used by owner served.
            The machine is sold because the owners have reached retirement age.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press PEDDINGHAUS Hydraulik 100


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12008 · Punching Press

          PEDDINGHAUS - Hydraulik 100 - - 1981 -

          Technical details
          pressure 100 t︱punching cross-cut in cmm -- ︱stroke 100 mm︱throat 510 mm︱work height max. 1100 mm︱Twist power 31 Durchm. in 25 mm︱channels - flange 100-400 mm︱Number of ventilators 80-400 mm︱ 100-400 mm︱ 100-550 mm︱punch stroke bei 20 mm Hub: 60 p.Min︱sheet thickness max. bei Luftbiegung: 10 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,3 m︱Electric 380 Volt ︱Diverse punches and dies ︱Foot pedal ︱Machinefeets ︱Video available on our website.
          Machine dealer with own stock of 1600 m².
            pressure 100 t
            punching cross-cut in cmm --
            stroke 100 mm
            throat 510 mm
            work height max. 1100 mm
            Twist power 31 Durchm. in 25 mm
            channels - flange 100-400 mm
            Number of ventilators 80-400 mm
            100-400 mm
            100-550 mm
            punch stroke bei 20 mm Hub: 60 p.Min
            sheet thickness max. bei Luftbiegung: 10 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,4 t
            dimensions of the machine ca. 1,7 x 0,9 x 2,3 m
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press MUHR & BENDER KBL 13


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-092045 · Punching Press

          MUHR & BENDER - KBL 13 - - 1977 -

          Technical details
          pressure 50 t︱ 150 x 16 mm︱stroke 28 mm︱ 12 mm︱plate length 250 mm︱square edge steel 45 mm︱round bar steel 50 mm︱sheet thickness 13 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 1,0 x 1,6 m︱
            pressure 50 t
            150 x 16 mm
            stroke 28 mm
            12 mm
            plate length 250 mm
            square edge steel 45 mm
            round bar steel 50 mm
            sheet thickness 13 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 1,0 x 1,6 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press EDEL SMO 26/660/12


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-1096 · Punching Press

          EDEL - SMO 26/660/12 - - 1973 -

          Technical details
          pressure 26 t︱punching cross-cut in cmm 80 x 2,5 ︱stroke - mm︱total power requirement 1,5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 3 x 3 x 2,5 m︱
          Punching Machine 26 to. 12-Station Toolmagazinseveral punching diesmatrix Workspace: Diameter 80 x 2,5 Drive: 1.5 Control: Throat 660 mm
            pressure 26 t
            punching cross-cut in cmm 80 x 2,5
            stroke - mm
            total power requirement 1,5 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 3 x 3 x 2,5 m
            Description :
            Punching Machine 26 to.


            12-Station Toolmagazinseveral punching diesmatrix
            Workspace: Diameter 80 x 2,5
            Drive: 1.5
            Control: Throat 660 mm


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press PEDDINGHAUS HYDRAULIK 500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34177 · Punching Press

          PEDDINGHAUS - HYDRAULIK 500 - - -

          Technical details
          pressure 050 t︱punching cross-cut in cmm 31 in 12 mm︱stroke max. 32,0 mm︱column arm 510 mm︱work height max. 1070 mm︱stroke - stepless adjustable 10 - 32 mm︱no. of strokes max. 45 Hub/min︱oil volume 45,0 l︱total power requirement 4,0 kW︱weight of the machine ca. 1120 kg.︱range L-W-H 1118 x 650 x 1680 mm︱
          ** good condition (!!) ** from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual
            pressure 050 t
            punching cross-cut in cmm 31 in 12 mm
            stroke max. 32,0 mm
            column arm 510 mm
            work height max. 1070 mm
            stroke - stepless adjustable 10 - 32 mm
            no. of strokes max. 45 Hub/min
            oil volume 45,0 l
            total power requirement 4,0 kW
            weight of the machine ca. 1120 kg.
            range L-W-H 1118 x 650 x 1680 mm
            Description :
            ** good condition (!!)
            ** from a maintenance workshop

            Furnishing:
            - hydraulic punch, with large overhang
            - Sheet metal wipers with wiper plates
            - stepless stroke adjustment
            - Various application tools
            - Die base
            - free-moving footswitch
            - Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press PEDDINGHAUS HYDRAULIC 1250


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412175 · Punching Press

          PEDDINGHAUS - HYDRAULIC 1250 - - -

          Technical details
          pressure 125 t︱punching cross-cut in cmm Ø 39 in 24 mm︱stroke 10 - 50 mm︱column arm 510 mm︱work height max. 1100 mm︱no. of strokes 29 Hub/min︱punch diameter max. Ø 130 x 7.0 mm︱oil volume 103 l︱total power requirement 11.0 kW︱weight of the machine ca. 2350 kg.︱range L-W-H 1750 x 1100 x 1910 mm︱
          ** good condition (!!) ** New price without accessories approx. 27.500 euros ** Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - User manual (PDF) * Special accessories included: - NC controlled stop system - WITHOUT function - the stop system is included in delivery - with error: Reference travel cannot be carried out - User language: Dutch - Stop system was not taken into account in the sales price of the machine * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412175
            pressure 125 t
            punching cross-cut in cmm Ø 39 in 24 mm
            stroke 10 - 50 mm
            column arm 510 mm
            work height max. 1100 mm
            no. of strokes 29 Hub/min
            punch diameter max. Ø 130 x 7.0 mm
            oil volume 103 l
            total power requirement 11.0 kW
            weight of the machine ca. 2350 kg.
            range L-W-H 1750 x 1100 x 1910 mm
            Description :
            ** good condition (!!)
            ** New price without accessories approx. 27.500 euros
            ** Special price on request

            Furnishing:
            - heavy / robust electro-hydraulic hole punch, with large throat
            - Punching station with material/sheet metal scraper
            - stepless stroke adjustment .. 10-50 mm
            - freely movable foot switch including protective cover
            - hydraulic low pressure finder for foot switch operation
            - Crane hanging eye for easy transport
            - side storage area
            - Hydraulic unit, integrated
            - Three-phase motor, 400 volts, 50 Hz
            - User manual (PDF)

            * Special accessories included:
            - NC controlled stop system - WITHOUT function
            - the stop system is included in delivery
            - with error: Reference travel cannot be carried out
            - User language: Dutch
            - Stop system was not taken into account in the sales price of the machine

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412175


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press PEDDINGHAUS HYDRAULIK 500


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412156 · Punching Press

          PEDDINGHAUS - HYDRAULIK 500 - - -

          Technical details
          pressure 50,0 t︱punching cross-cut in cmm 31 in 12 mm︱stroke max. 32,0 mm︱column arm 510 mm︱work height max. 1070 mm︱stroke - stepless adjustable 10 - 32 mm︱no. of strokes max. 45 Hub/min︱oil volume 45,0 l︱total power requirement 4,0 kW︱weight of the machine ca. 1120 kg.︱range L-W-H 1118 x 650 x 1680 mm︱
          ** good condition (!!) ** from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual
            pressure 50,0 t
            punching cross-cut in cmm 31 in 12 mm
            stroke max. 32,0 mm
            column arm 510 mm
            work height max. 1070 mm
            stroke - stepless adjustable 10 - 32 mm
            no. of strokes max. 45 Hub/min
            oil volume 45,0 l
            total power requirement 4,0 kW
            weight of the machine ca. 1120 kg.
            range L-W-H 1118 x 650 x 1680 mm
            Description :
            ** good condition (!!)
            ** from a maintenance workshop

            Furnishing:
            - hydraulic punch, with large overhang
            - Sheet metal wipers with wiper plates
            - stepless stroke adjustment
            - Various application tools
            - Die base
            - free-moving footswitch
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press DESTACO Stanzbuegel


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09207 · Punching Press

          DESTACO - Stanzbuegel - - -

          Technical details
          stamp capacity 2 - 63 mm︱throat 110 / 200 mm︱
          Various Destaco punching iron, some with accessories: No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data: see picture, price per piece: 150,- No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m².
            stamp capacity 2 - 63 mm
            throat 110 / 200 mm
            Description :
            Various Destaco punching iron, some with accessories:
            No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data:
            see picture, price per piece: 150,-
            No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies,
            technical data: see picture, price per piece incl. accessories: 350,-
            No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies,
            technical data: see picture, price per piece incl. accessories 500,-

            1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm,
            material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR

            1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm,
            material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR

            Diverse punching dies.

            We can also sell each of them.
            Machine dealer with own stock of 1600 m².




        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press PEDDINGHAUS Hydraulic 280


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8412009 · Punching Press

          PEDDINGHAUS - Hydraulic 280 - - -

          Technical details
          punching pressure 28 t︱punching cross-cut in cmm 31 in 7 mm︱round bar steel 32,0 mm︱throat 250 mm︱dayligth 223 mm︱no. of strokes 10 - 30 Hub/min︱oil volume 32 ltr.︱work height max. 1.033 mm︱total power requirement 3,0 kW︱weight of the machine ca. 553 kg.︱dimensions of the machine ca. 730 x 540 x 1530 m︱
          Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery
            punching pressure 28 t
            punching cross-cut in cmm 31 in 7 mm
            round bar steel 32,0 mm
            throat 250 mm
            dayligth 223 mm
            no. of strokes 10 - 30 Hub/min
            oil volume 32 ltr.
            work height max. 1.033 mm
            total power requirement 3,0 kW
            weight of the machine ca. 553 kg.
            dimensions of the machine ca. 730 x 540 x 1530 m
            Description :
            Furnishing:
            - Punch quick-change device up to Ø 31 mm - green series -
            installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm
            - Free: LED lighting in the punching area
            - Swiveling scraper (plates exchangeable)
            - Various material support tables are available separately
            - Brace
            - 2-step foot switch, with double press for grain search function
            - electrical controls
            - Stroke length and stroke position continuously adjustable
            - integrated hydraulic unit with oil filling
            - Performance specifications apply to a material strength of 450 N/mm²
            - Main connection cable and plug for 16 amps are not included in the scope
            of delivery


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press MUBEA KLH 300/610


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412170 · Punching Press

          MUBEA - KLH 300/610 - - -

          Technical details
          pressure 30.0 t︱punching cross-cut in cmm 30 in 9.0 mm︱stroke 0 - 28.0 mm︱column arm 610 mm︱work height max. 1010 mm︱no. of strokes ca. 35 Hub/min︱oil volume 35.0 l︱punching cross-cut in cmm 270 mm²︱total power requirement 4.0 kW︱weight of the machine ca. 1200 kg.︱range L-W-H 1400 x 700 x 1600 mm︱
          ** good condition (!!) ** with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412170
            pressure 30.0 t
            punching cross-cut in cmm 30 in 9.0 mm
            stroke 0 - 28.0 mm
            column arm 610 mm
            work height max. 1010 mm
            no. of strokes ca. 35 Hub/min
            oil volume 35.0 l
            punching cross-cut in cmm 270 mm²
            total power requirement 4.0 kW
            weight of the machine ca. 1200 kg.
            range L-W-H 1400 x 700 x 1600 mm
            Description :
            ** good condition (!!)
            ** with a lot of application tools (stamps/dies)

            Furnishing:
            - electro-hydraulic hole punch, with large throat
            - Material/sheet metal scrapers including scraper plates
            - Large material support table, with adjustable depth stops
            - continuous stroke adjustment
            - freely movable foot switch including protective cover
            - Forklift pockets for easy transport
            - side storage area
            - lots of accessories + tools - including tool cabinet
            - Matrix base (for special size matrices)
            - Stamp holders (for special size stamps)
            - original user manuel

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9412170


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Punching Press PROMOTECH PRO 60 HP


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-577 · Punching Press

          PROMOTECH - PRO 60 HP - - -

          Technical details
          neuca. 4 Wochen ab AuftragsePolen7710 €︱ 159.6 €︱ 35 to︱ 60 mm︱ 27 mm︱ 25x18 mm︱ 5 s︱ 13 mm︱ 700 bar︱ 379 mm︱ 148 mm︱ 335 mm︱ 20 kg︱
          MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Wide range of special-shaped punches and dies OPTIONAL: Gantry punching station for increased productivity and operation comfort € 720,-
            neu
            ca. 4 Wochen ab Auftragse
            Polen
            7710 €
            159.6 €
            35 to
            60 mm
            27 mm
            25x18 mm
            5 s
            13 mm
            700 bar
            379 mm
            148 mm
            335 mm
            20 kg
            Description :
            MOBILE HYDRAULICS-POWERSTATION
            Double action - fully automated process of punching and return
            Wide range of hole diameters up to 27mm
            Intelligent control system with inching and automatic load detection
            Mode indicator light
            Protection against accidental start-up
            Wide range of special-shaped punches and dies

            OPTIONAL:

            Gantry punching station for increased productivity and operation comfort

            720,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine FASTI 212-30-4


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1150 · Folding Machine

          FASTI - 212-30-4 - - unbekannt -

          Technical details
          sheet width 3040 mm︱plate thickness 4 mm︱distance between columns / mm︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            sheet width 3040 mm
            plate thickness 4 mm
            distance between columns / mm
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HM Machinery HBM 3100-65S


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08500 · Folding Machine

          HM Machinery - HBM 3100-65S - - neu -

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱thickness at "Niro-steel" 4,5 mm︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱total power requirement 7,4 kW︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. 4,5 x 1,72 x 2 m︱Electric 380 Volt ︱manuel back gauge adjustable from the front 70 - 600 mm︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Video available on our website.
          Machine dealer with own stock of 1600 m².
            sheet width 3100 mm
            plate thickness 6 mm
            thickness at "Niro-steel" 4,5 mm
            daylight upper clamping 100 mm
            Bending angle 0 - 135 °
            total power requirement 7,4 kW
            weight of the machine ca. 7,6 t
            dimensions of the machine ca. 4,5 x 1,72 x 2 m
            manuel back gauge adjustable fro. 70 - 600 mm
            Oil filling exklusive
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine METALLKRAFT FSBM 1020 - 25 E


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-FSBM · Folding Machine

          METALLKRAFT - FSBM 1020 - 25 E - - NEU -

          Technical details
          sheet width 1020 mm︱plate thickness 2,5 mm︱bending angle max. 135 °︱stroke of upper beam 25 mm︱weight of the machine ca. 285 kg︱dimensions of the machine ca. 1,35 x 0,85 x 1,20 m︱
          *** PRICE: 2.045,-- EUR *** - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application
            sheet width 1020 mm
            plate thickness 2,5 mm
            bending angle max. 135 °
            stroke of upper beam 25 mm
            weight of the machine ca. 285 kg
            dimensions of the machine ca. 1,35 x 0,85 x 1,20 m
            Description :

            *** PRICE: 2.045,-- EUR ***

            - with an oblique segmented upper cheek
            - distribution segment:
            25-30-35-40-45-50-75-100-150-200-270
            - done with the foot brake application


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          GABRO - GEKA -