'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Bar Stock Carrier

          Machinelist: Bar Stock Carrier


          Bar Stock Carrier

          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO ecoProfi 42.6 RK3 - 6000 III


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09212F · Bar Stock Carrier

          BREUNING IRCO - ecoProfi 42.6 RK3 - 6000 III - - 2020 - SPS

          Technical details
          diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱
          used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design
            diameter 5 - max. 51 mm
            Guide channels max. 6
            Spindle height ca. 1020 mm
            bar material dia. min. 5 mm
            bar material dia. max. 51 mm
            max. bar length 6200 mm
            Remaining piece design 600 mm
            accumulator pressure min 6 bar
            coolant capacity 1500 l/min
            control SPS
            total power requirement 2,3 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 7,2 x 1,55 x 1,6 m
            Description :
            used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III
            Condition: As NEW, approx. 500 operating hours
            incl:
            Guide channels Ø 20/24/44 Material slide Ø 19/22/42
            spindle insert tubes Ø 20/24/44
            Interface to the machine set up for Mazak QT 200 MS x 500

            Area of application: Ideal for small to medium batch sizes
            Features:
            Minimal changeover times, channel change at the touch of a button
            Optimum running properties 3 to 6 guide channels, high dead weight
            Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels
            High level of operating convenience thanks to an 18 cm (7") widescreen touch
            display. Reliable feeding of rotationally symmetrical profile material
            Electronic synchronisation device, optimum material guidance between magazine
            and machine with hydrodynamic telescopic system.
            Simple changeover from long to short turning operation at the touch of a button
            Special features:
            Simple change of the spindle insert tubes through axial displacement of the
            magazine. Process-integrated remnant removal to the rear (remnant length 600 mm)
            Machine-friendly, vibration-absorbing design


        • Mager & Wedemeyer
        • Europaallee 24a
        • 28309 Bremen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier LNS Eco Load


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2777 · Bar Stock Carrier

          LNS - Eco Load - - 2004 -

          Technical details
          Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱
            Bar diameter 6 - 65 mm
            Bar Length 300 - 1250 mm
            Length 1600 mm
            Depth 1048 mm
            Height 1010 / 1410 mm
            Weight 375 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO Profimat 65.6 196.6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8361 · Bar Stock Carrier

          BREUNING IRCO - Profimat 65.6 196.6 - - 2001 - SPS

          Technical details
          diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱
          Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC
            diameter 35 - max. 65 mm
            Guide channels 6
            control SPS
            max. bar length 3.200 mm
            bar material dia. min. 35 mm
            bar material dia. max. 65 mm
            total power requirement 2 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
            Description :
            Multi-Channel-Bar-Feeding-System
            BREUNING IRCO - 65.6 196.6

            - has been installed at a Mori Seiki ZL 200 SMC


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier IRCO ILS-RBE 7208


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03051 · Bar Stock Carrier

          IRCO - ILS-RBE 7208 - - 1999 -

          Technical details
          diameter 15 mm︱length 800 mm︱
          = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm
            diameter 15 mm
            length 800 mm
            Description :
            = bar loading and de-loading magazine

            for bars up to 15 mmø, bar length 800 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier SYMCO KH-16


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03050 · Bar Stock Carrier

          SYMCO - KH-16 - - 1999 -

          Technical details
          diameter 3 - 16 mm︱length 3000 mm︱
          = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø
            diameter 3 - 16 mm
            length 3000 mm
            Description :
            = bar loading magazin

            for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø



        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier FMB Turbo 3-26


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02960 · Bar Stock Carrier

          FMB - Turbo 3-26 - - 1998 -

          Technical details
          diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱
          Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26
            diameter 26 mm
            length 3200 mm
            total power requirement 1 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 4,5 x 0,8 x 1,35 m
            Description :
            Bar feeder FMB Turbo 3-26

            1 channel and bar pusher for 26mm
            Bar length max. 3200 mm
            Was attached to Gildemeister Ergomat TDA 26



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB DNH 42/3000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03060 · Bar Stock Carrier

          TRAUB - DNH 42/3000 - - 1998 -

          Technical details
          bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱
          = bar loading magazine, compressed air controlled
            bar material dia. 12 - 42 mm
            bar length 3200 mm
            feed speeds 220 mm/sec
            return speed 440 mm/sec
            feed power bis 400 Nm
            compressed air max. 6 bar
            filling capacity 22 Stangen x ø 12 mm
            filling capacity 13 Stangen x ø 20 mm
            filling capacity 7 Stangen x ø 42 mm
            hexagon material bis SW 27 mm
            square material bis SW 20 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,83 t
            dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m
            Description :
            = bar loading magazine, compressed air controlled


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier HYDROBAR LNS - THB-42-2,4


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002243 · Bar Stock Carrier

          HYDROBAR - LNS - THB-42-2,4 - - 1996 -

          Technical details
          diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱
          Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,
            diameter 42 mm
            length 1500 mm
            voltage 380 V / 50 Hz
            total power requirement 1,1 kW
            weight of the machine ca. 0.4 t
            Description :
            Rod guidance pipe, diameter 42 x 2400 mm length,
            2 columns, 1 hydraulic aggregate,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB 45/26


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00388 · Bar Stock Carrier

          TRAUB - 45/26 - - 1984/96 -

          Technical details
          diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱
            diameter 45 mm
            length 4400 mm
            total power requirement 1,0 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 5 x 0,4 x 1,2 m


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact

          Vise

          used Other accessories for machine tools Vise WENIG M 150 / 160 / 200


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09245 · Vise

          WENIG - M 150 / 160 / 200 - - ungebraucht -

          Technical details
          thickness of jaw 150 / 160 / 200 mm︱max. clamping width 105 / 138 / 275 mm ca.︱high of jaw 46 / 63 mm︱
          New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 700, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m².
            thickness of jaw 150 / 160 / 200 mm
            max. clamping width 105 / 138 / 275 mm ca.
            high of jaw 46 / 63 mm
            Description :
            New machine vices on rotating plate 360 °, provided with 180 ° degree scale
            from remaining stock at a special price.
            The body is made of high quality gray cast iron (FC-25), jaws made of
            rolled steel, hardened, replaceable.
            Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm,
            Weight: 26 kg, photos 1-3, price 270, - + VAT.
            Mod. M 160: with covered spindle, three-way adjustable via socket pin,
            Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight:
            43 kg, photos 4-6, price 700, - + VAT.
            Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm
            Weight: 54 kg, photos 7-9, price 495, - + VAT.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise WENIG M 220


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09223 · Vise

          WENIG - M 220 - - ungebraucht -

          Technical details
          thickness of jaw 220 mm︱max. clamping width ca. 275 mm︱high of jaw 63 mm︱weight ca. 70 kg︱
          New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m².
            thickness of jaw 220 mm
            max. clamping width ca. 275 mm
            high of jaw 63 mm
            weight ca. 70 kg
            Description :
            New machine vices on rotating plate 360 °, provided with 180 ° degree scale
            from remaining stock at a special price.
            The body is made of high quality gray cast iron (FC-25), jaws made of
            rolled steel, hardened, replaceable.
            Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm,
            Weight: 26 kg, photos 1-3, price 270, - + VAT.
            Mod. M 160: with covered spindle, three-way adjustable via socket pin,
            Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight:
            43 kg, photos 4-6, price 780, - + VAT.
            Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm
            Weight: 54 kg, photos 7-9, price 495, - + VAT.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise WENIG M 129


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09225 · Vise

          WENIG - M 129 - - unbenutzt -

          Technical details
          thickness of jaw 129 mm︱clamping width 85 mm︱high of jaw 40 mm︱weight 16 kg︱dimensions of the machine ca. 0,45 x 0,2 x 0,15 m︱
          Machine dealer with own stock of 1600 m².
            thickness of jaw 129 mm
            clamping width 85 mm
            high of jaw 40 mm
            weight 16 kg
            dimensions of the machine ca. 0,45 x 0,2 x 0,15 m
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise SCHRAUBSTOCK unbekannt


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23110 · Vise

          SCHRAUBSTOCK - unbekannt - - unbekannt -

          Technical details
          thickness of jaw 170 mm︱clamping length 150 mm︱ 50 mm︱weight 10 kg︱
            thickness of jaw 170 mm
            clamping length 150 mm
            50 mm
            weight 10 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise SINUS


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1211 · Vise

          SINUS - - - unbekannt -

          Technical details
          thickness of jaw 64 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          1 pc. used SINUS vice "094372" jaw width 64 mm jaw height 30 mm max. clamping length 80 mm total height approx. 110 mm base plate 175 x 95 mm
            thickness of jaw 64 mm
            Description :
            1 pc. used SINUS vice "094372"
            jaw width 64 mm
            jaw height 30 mm
            max. clamping length 80 mm
            total height approx. 110 mm
            base plate 175 x 95 mm


        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise SINUS


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1212 · Vise

          SINUS - - - unbekannt -

          Technical details
          thickness of jaw 65 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          1 pc. used SINUS vice "088972 jaw width 65 mm jaw height 30 mm max. clamping length 80 mm total height approx. 92 mm base plate 220 x 130 mm
            thickness of jaw 65 mm
            Description :
            1 pc. used SINUS vice "088972
            jaw width 65 mm
            jaw height 30 mm
            max. clamping length 80 mm
            total height approx. 92 mm
            base plate 220 x 130 mm


        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise FRITZ WERNER BERLIN Wellenschraubstock + Prisma


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24050 · Vise

          FRITZ WERNER BERLIN - Wellenschraubstock + Prisma - - unbekannt -

          Technical details
          thickness of jaw 110 mm︱amount 1 STK︱
            thickness of jaw 110 mm
            amount 1 STK


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise UNBEKANNT


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002860A · Vise

          UNBEKANNT - - - unbekannt -

          Technical details
          thickness of jaw 200 mm︱opening of clamping jaw max. 360 mm︱clamping capacity 5000 kp︱total power requirement / kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,3 x 0,7 x 0,15 m︱
          • hydraulical vise, with turning disk, new sealed and filled,
            thickness of jaw 200 mm
            opening of clamping jaw max. 360 mm
            clamping capacity 5000 kp
            total power requirement / kW
            weight of the machine ca. 0,1 t
            dimensions of the machine ca. 0,3 x 0,7 x 0,15 m
            Description :
            • hydraulical vise, with turning disk, new sealed and filled,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise RUECKLE


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-1522 · Vise

          RUECKLE - - - unbekannt -

          Technical details
          thickness of jaw 130 mm︱clamping length 160 mm︱ 45 mm︱weight 10 kg︱
            thickness of jaw 130 mm
            clamping length 160 mm
            45 mm
            weight 10 kg


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise UNBEKANNT Schwenkbarer Schraubstock


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1014 · Vise

          UNBEKANNT - Schwenkbarer Schraubstock - - unbekannt -

          Technical details
          thickness of jaw 150 mm︱
          Span: 150mm Jaw width: 200mm Total length: approx. 420mm
            thickness of jaw 150 mm
            Description :
            Span: 150mm
            Jaw width: 200mm
            Total length: approx. 420mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise UNBEKANNT Hydraulisch


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1029 · Vise

          UNBEKANNT - Hydraulisch - - unbekannt -

          Technical details
          thickness of jaw 150 mm︱
            thickness of jaw 150 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise UNBEKANNT Hydraulischer-Schraubstock


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1445 · Vise

          UNBEKANNT - Hydraulischer-Schraubstock - - unbekannt -

          Technical details
          thickness of jaw 160 mm︱weight 55 kg︱total power requirement / kW︱
          Jaw width: 210mm Jaw height: approx 70mm Span: approx. 300mm dimension Length: about 630mm Width: about 255mm Weight: 55kg
            thickness of jaw 160 mm
            weight 55 kg
            total power requirement / kW
            Description :
            Jaw width: 210mm
            Jaw height: approx 70mm
            Span: approx. 300mm

            dimension
            Length: about 630mm
            Width: about 255mm

            Weight: 55kg


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise UNBEKANNT Hydraulischer Schraubstock


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1015 · Vise

          UNBEKANNT - Hydraulischer Schraubstock - - unbekannt -

          Technical details
          thickness of jaw 155 mm︱
            thickness of jaw 155 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise VERTEX Hydraulischer-Schraubstock


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1446 · Vise

          VERTEX - Hydraulischer-Schraubstock - - unbekannt -

          Technical details
          thickness of jaw 210 mm︱weight 95 kg︱total power requirement / kW︱
            thickness of jaw 210 mm
            weight 95 kg
            total power requirement / kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Vise SAGOP 2 / RP80


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1033 · Vise

          SAGOP - 2 / RP80 - - unbekannt -

          Technical details
          thickness of jaw ca. 150 mm︱
          Span: approx. 240mm Jaw width: approx. 150mm 2 x in stock
            thickness of jaw ca. 150 mm
            Description :
            Span: approx. 240mm
            Jaw width: approx. 150mm




            2 x in stock


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          TRAUB - BREUNING IRCO - SYMCO - FMB - LNS - IRCO - HYDROBAR -