Fixatoren

diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱

---

used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design

Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱

---

diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱

---

Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC

diameter 15 mm︱length 800 mm︱

---

= bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm

diameter 3 - 16 mm︱length 3000 mm︱

---

= bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø

diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱

---

Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26

bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱

---

= bar loading magazine, compressed air controlled

diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱

---

Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,

diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱

---

4 STK︱weight 1250 kg︱dimensions 1,2 x 0,85 x 2,0 m︱

---

max. load 240000 N︱ 220 x 150 x 95 mm︱weight 11,5 kg︱screw diameter M 24 ︱

---

12 pieces in stock, without threaded screw, Photo is a brochure picture ! Unit price € 80,-

max. load 120 000 N︱ 178 x 120 x 75 mm︱weight 5,5 kg︱screw diameter M20 ︱

---

16 pieces in stock, without threaded screw, Photo is a brochure picture ! Unit price € 70,-

max. load 60 to︱dimensions 330 x 225 x 166 mm︱weight 28 kg︱

---

42 pcs. of levelling elements for floor-plates - with ball-adjusting disc for non-angular surfaces - with fixation and height-adjustmet bolt - with possibility of fixation to the foundation by means of 2 lateral foundation bolts (not included) - height of adjustment bolt 380 mm, M 36 x 1,5, SW 30

max. load - kg︱ - ︱weight - kg︱

---

10 off used machine shoes.

table diameter 800 mm︱table height 220 mm︱weight 430 kg︱

---

table diameter 500 mm︱weight of the machine ca. ca. 0,2 t︱table height / mm︱

---

centre height / mm︱

---

O. 600 mm Weight: 340 kg

table length 800 mm︱table width 800 mm︱table load / t︱

---

Make: Fibrotakt Type: 11.16.7.13.3.72.41.4.0360 Diameter: 800mm + FIBRO control cabinet + Heidenhain up-down counter Type: VRZ 166 + Peiseler hydraulic pump Type:26184 round table: Total length: about 1500mm Total width: approx. 900mm Total height: approx. 320mm Documents: circuit diagram

table diameter 1000 mm︱table load / t︱table height 200 mm︱weight 730 kg︱

---

centre height / mm︱weight 110 kg︱diameter 360 mm︱

---

centre height / mm︱weight 160 kg︱diameter 500 mm︱

---

centre height / mm︱weight 110 kg︱diameter 400 mm︱

---

table diameter 630 mm︱weight of the machine ca. ca, 0,35 t︱table height 220 mm︱

---

table diameter 700 mm︱table load ? t︱table height ? mm︱weight of the machine ca. 300 kg︱dimensions of the machine ca. ? m︱

---