'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Diecasting machines

          Machinelist: Diecasting machines


          Accessories for Diecasting Machines

          used Diecasting machines Accessories for Diecasting Machines FRECH Tiegelabdeckung


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-30 · Accessories for Diecasting Machines

          FRECH - Tiegelabdeckung - - unbekannt - ohne

          Technical details

          isolated crucible cover for multi chamber Meltec furnace ZC80/180
            Description :
            isolated crucible cover for multi chamber Meltec furnace ZC80/180
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines FRECH Z20/120C


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983995 · Accessories for Diecasting Machines

          FRECH - Z20/120C - - 2018 -

          Technical details
          pan capacity 420 kg︱
          Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet.
            pan capacity 420 kg
            Description :
            Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible.

            Crucible content 420kg/Zn.
            Melting capacity 120kg/Zn/h
            Electrical Connection 21,5kW

            With control cabinet.
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines FRECH ZC200/250


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-33 · Accessories for Diecasting Machines

          FRECH - ZC200/250 - - 2014 -

          Technical details
          connected load 36 kW︱
          Used machine furnace type Meltec ZC 200/250 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing zinc alloys. Melting capacity per hour 250kg / h 36 kW connected load.
            connected load 36 kW
            Description :
            Used machine furnace type Meltec ZC 200/250 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing zinc alloys.

            Melting capacity per hour 250kg / h 36 kW connected load.

          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines ROBAMAT 2212


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-984951 · Accessories for Diecasting Machines

          ROBAMAT - 2212 - - 2008 -

          Technical details
          heating capacity 2 x 12 kW︱Cooling capacity 2 x 35 kW︱
          Used heating and cooling unit from Robamat for die casting machines. This two-circuit device is designed for the temperature control of die casting tools with water. Available ex stock. Checked, maintained and repaired at service partner of the manufacturer Circuits: 2 Flow temperature max. 160°C Heating capacity 2x 12kW Cooling capacity 2x 35kW Voltage 3x 400V / 50Hz Production cycle - break Central fault indication
            heating capacity 2 x 12 kW
            Cooling capacity 2 x 35 kW
            Description :
            Used heating and cooling unit from Robamat for die casting machines.
            This two-circuit device is designed for the temperature control of die casting tools with water.

            Available ex stock. Checked, maintained and repaired at service partner of the manufacturer

            Circuits: 2
            Flow temperature max. 160°C
            Heating capacity 2x 12kW
            Cooling capacity 2x 35kW
            Voltage 3x 400V / 50Hz
            Production cycle - break
            Central fault indication
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines FRECH Spraymotion 411 E


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-17 · Accessories for Diecasting Machines

          FRECH - Spraymotion 411 E - - 2007 - ohne

          Technical details

          used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Included support unit and spray- and blowrail (system SR) Connection 24 pin plug electric driving unit with 400mm stroke length
            Description :
            used electric sprayer Spraymotion 411 E for die casting machines.
            The device has been tested by the manufacturer for function

            Included support unit and spray- and blowrail (system SR)
            Connection 24 pin plug
            electric driving unit with 400mm stroke length
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines Robamat 5201


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983310 · Accessories for Diecasting Machines

          Robamat - 5201 - - 2004 -

          Technical details
          heating capacity 20 kW︱
          Used heating unit from Robamat for die casting machines. This single-circuit device is designes for the temperature control of die casting tools with oil. The device has been testet for function by the service partner of the manufacturer. Circuits: 1 Flow temperature max. 250°C Heating capacity 1x 20kW Voltage 3x 400V / 50Hz Pump typ / capacity PM3 80L/min
            heating capacity 20 kW
            Description :
            Used heating unit from Robamat for die casting machines.
            This single-circuit device is designes for the temperature control of die casting tools with oil.
            The device has been testet for function by the service partner of the manufacturer.

            Circuits: 1
            Flow temperature max. 250°C
            Heating capacity 1x 20kW
            Voltage 3x 400V / 50Hz
            Pump typ / capacity PM3 80L/min
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines Robamat 3201


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-985370 · Accessories for Diecasting Machines

          Robamat - 3201 - - 2004 -

          Technical details
          heating capacity 10 kW︱Cooling capacity 40 kW︱
          Used heating and cooling unit from Robamat for die casting machines. This single-circuit device is designed for the temperature control of die casting tools with oil. The device has been serviced and repaired by the service partner of the manufacturer. Circuits: 1 Flow temperature max. 250°C Heating capacity 1x 10kW Cooling capacity 1x 40kW Voltage 3x 400V / 50Hz Pump typ / capacity PM1
            heating capacity 10 kW
            Cooling capacity 40 kW
            Description :
            Used heating and cooling unit from Robamat for die casting machines.
            This single-circuit device is designed for the temperature control of die casting tools with oil.
            The device has been serviced and repaired by the service partner of the manufacturer.

            Circuits: 1
            Flow temperature max. 250°C
            Heating capacity 1x 10kW
            Cooling capacity 1x 40kW
            Voltage 3x 400V / 50Hz
            Pump typ / capacity PM1
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines MELTEC Z 50/180 B


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-37 · Accessories for Diecasting Machines

          MELTEC - Z 50/180 B - - 2001 - ohne

          Technical details

          Used Meltec furnace Typ Z50/180 B (gas heated) incl. used steel crucible and substructure and control cabinet heating capacity 40kW suitable for DAW 40 and DAW 50
            Description :
            Used Meltec furnace Typ Z50/180 B (gas heated) incl. used steel crucible and substructure and control cabinet
            heating capacity 40kW

            suitable for DAW 40 and DAW 50
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines FRECH M200/120


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-34 · Accessories for Diecasting Machines

          FRECH - M200/120 - - 2001 -

          Technical details
          connected load 54 kW︱
          Used machine furnace type Meltec M 200/120 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing magnesium alloys. Melting capacity per hour 120kg / h 54 kW connected load. A suitable control cabinet can be built if required.
            connected load 54 kW
            Description :
            Used machine furnace type Meltec M 200/120 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing magnesium alloys.

            Melting capacity per hour 120kg / h 54 kW connected load.

            A suitable control cabinet can be built if required.
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines MELTEC ZC20/120


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-43 · Accessories for Diecasting Machines

          MELTEC - ZC20/120 - - 2000 - ohne

          Technical details

          Used Meltec electric furnace MELTEC Typ Z20/120 incl. used iron steel crucible, isolated cover, substructure and control cabinet heating capacity 21,5kW suitable for DAW 20F and W20Zn Delivery of cable set possible at extra charge
            Description :
            Used Meltec electric furnace MELTEC Typ Z20/120 incl. used iron steel crucible, isolated cover, substructure and control cabinet

            heating capacity 21,5kW

            suitable for DAW 20F and W20Zn

            Delivery of cable set possible at extra charge
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines FRECH ZC80/180


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-51 · Accessories for Diecasting Machines

          FRECH - ZC80/180 - - 2000 - konventionell

          Technical details
          total power requirement kW︱weight of the machine ca. t︱required space m︱
          Used furnace cabinet for die casting machine Frech type DAW 80 - suitable for multi-chamber furnace MELTEC - type 80/180 with individual controls. Has been checked for functionality by the manufacturer.
            Description :
            Used furnace cabinet for die casting machine Frech type DAW 80 - suitable for multi-chamber furnace MELTEC - type 80/180 with individual controls.

            Has been checked for functionality by the manufacturer.
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines RAUCH MOS 50/80U


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-59 · Accessories for Diecasting Machines

          RAUCH - MOS 50/80U - - 1995 - ohne

          Technical details

          Used Rauch furnace Typ MOS50/80U incl. used stainless steel crucible (not origin), substructure and control cabinet. heating capacity 24kW, 3x400V 50Hz suitable for DAW 50 and DAW 80 Delivery of cable set possible at extra charge
            Description :
            Used Rauch furnace Typ MOS50/80U incl. used stainless steel crucible (not origin), substructure and control cabinet.

            heating capacity 24kW, 3x400V 50Hz

            suitable for DAW 50 and DAW 80

            Delivery of cable set possible at extra charge
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines RAUCH MO 50 E


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-49 · Accessories for Diecasting Machines

          RAUCH - MO 50 E - - 1993 - ohne

          Technical details
          total power requirement kW︱weight of the machine ca. t︱required space m︱
          Used Rauch furnace Typ MO50E incl. used cast iron crucible and substructure. Without control cabinet heating capacity 17,5kW, 3x400V 50Hz suitable for DAW 40 and DAW 50
            Description :
            Used Rauch furnace Typ MO50E incl. used cast iron crucible and substructure.
            Without control cabinet
            heating capacity 17,5kW, 3x400V 50Hz

            suitable for DAW 40 and DAW 50
          Datasheet
          Request / Contact
          used Diecasting machines Accessories for Diecasting Machines FRECH Spraymat 401S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-60 · Accessories for Diecasting Machines

          FRECH - Spraymat 401S - - 1993 - ohne

          Technical details

          used pneumatic sprayer Spraymat 401 S for die casting machines. The device has been tested by the manufacturer for function Included used support unit and spray- and blowrail (system SR) Connection 10 pin plug electric driving unit with 400mm stroke length
            Description :
            used pneumatic sprayer Spraymat 401 S for die casting machines.
            The device has been tested by the manufacturer for function

            Included used support unit and spray- and blowrail (system SR)
            Connection 10 pin plug
            electric driving unit with 400mm stroke length
          Datasheet
          Request / Contact

          Hot-Chamber Diecasting Machine - Vertic.

          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. Frech Espana  DAW 125 PD SBC3


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-985473 · Hot-Chamber Diecasting Machine - Vertic.

          Frech Espana - DAW 125 PD SBC3 - - 2003 - SBC 3.0

          Technical details
          closing pressure 1250 kN︱clamping plate 620x620 mm︱distance between columns 400x400 mm︱weight of the machine ca. 6 t︱lock stroke 340 mm︱capacity of ejector 80 kN︱ejector stroke 90 mm︱height of form 170-500 mm︱column diameter 75 mm︱casting capacity 100 kN︱casting plunger stroke 150 m/m︱injection plunger diameter 60,70,80 mm︱casting volume (DIN 24480) 205,330,475 cm 2︱volume cast pressure 355,260,200 kp/cm²︱casting area 352,480,625 cm 2︱Traverse Stroke 200 m/m︱
          Used Die Casting machine DAW 125 with SBC control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Meltec Typ Z125/xxx. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 1250 kN
            clamping plate 620x620 mm
            distance between columns 400x400 mm
            weight of the machine ca. 6 t
            lock stroke 340 mm
            capacity of ejector 80 kN
            ejector stroke 90 mm
            height of form 170-500 mm
            column diameter 75 mm
            casting capacity 100 kN
            casting plunger stroke 150 m/m
            injection plunger diameter 60,70,80 mm
            casting volume (DIN 24480) 205,330,475 cm 2
            volume cast pressure 355,260,200 kp/cm²
            casting area 352,480,625 cm 2
            Traverse Stroke 200 m/m
            Description :
            Used Die Casting machine DAW 125 with SBC control for the use of zinc alloys.
            Available from used machine stock.
            The machine is equipped with an electric furnace from Meltec Typ Z125/xxx. Without sprayer.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 80S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983776 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 80S - - 2000 - Datacontrol

          Technical details
          closing pressure 900 kN︱clamping plate 540x540 mm︱distance between columns 350x350 mm︱weight of the machine ca. 5,5 t︱lock stroke 280 mm︱capacity of ejector 60 kN︱ejector stroke 70 mm︱height of form 160-400 mm︱column diameter 65 mm︱casting capacity 75 kN︱casting plunger stroke 130 m/m︱injection plunger diameter 50,55,60 mm︱casting volume (DIN 24480) 119, 163, 214 cm 2︱volume cast pressure 380, 315, 265 kp/cm²︱casting area 236, 285, 340 cm 2︱Traverse Stroke 150 m/m︱
          Generaloverhauled diecasting machine DAW80 GO with Datalogic Control for the used of zinc alloys Available upon aggreement
            closing pressure 900 kN
            clamping plate 540x540 mm
            distance between columns 350x350 mm
            weight of the machine ca. 5,5 t
            lock stroke 280 mm
            capacity of ejector 60 kN
            ejector stroke 70 mm
            height of form 160-400 mm
            column diameter 65 mm
            casting capacity 75 kN
            casting plunger stroke 130 m/m
            injection plunger diameter 50,55,60 mm
            casting volume (DIN 24480) 119, 163, 214 cm 2
            volume cast pressure 380, 315, 265 kp/cm²
            casting area 236, 285, 340 cm 2
            Traverse Stroke 150 m/m
            Description :
            Generaloverhauled diecasting machine DAW80 GO with Datalogic Control for the used of zinc alloys

            Available upon aggreement
          Datasheet
          Request / Contact
          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. FRECH DAM 315 S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-982861 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAM 315 S - - 1999 - Datacontrol

          Technical details
          closing pressure 3150 kN︱clamping plate 900x900 mm︱distance between columns 550x550 mm︱weight of the machine ca. 15,5 t︱lock stroke 500 mm︱capacity of ejector 159 kN︱ejector stroke 120 mm︱height of form 300-700 mm︱column diameter 110 mm︱casting capacity 158 kN︱casting plunger stroke 250 mm︱injection plunger diameter 70,80,90,100 mm︱casting volume (DIN 24480) 514,791,1105,1455 cm 2︱volume cast pressure 410,316,249,201 kp/cm²︱casting area 768,996,1265,1597 cm 2︱Traverse Stroke 300 mm︱
          Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 3150 kN
            clamping plate 900x900 mm
            distance between columns 550x550 mm
            weight of the machine ca. 15,5 t
            lock stroke 500 mm
            capacity of ejector 159 kN
            ejector stroke 120 mm
            height of form 300-700 mm
            column diameter 110 mm
            casting capacity 158 kN
            casting plunger stroke 250 mm
            injection plunger diameter 70,80,90,100 mm
            casting volume (DIN 24480) 514,791,1105,1455 cm 2
            volume cast pressure 410,316,249,201 kp/cm²
            casting area 768,996,1265,1597 cm 2
            Traverse Stroke 300 mm
            Description :
            Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys.
            Available from used machine stock.
            The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 200S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-981270 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 200S - - 1995 - Datavario DV

          Technical details
          closing pressure 2200 kN︱clamping plate 755x755 mm︱distance between columns 500x500 mm︱weight of the machine ca. 8 t︱lock stroke 430 mm︱capacity of ejector 110 kN︱ejector stroke 100 mm︱height of form 250-600 mm︱column diameter 85 mm︱casting capacity 130 kN︱casting plunger stroke 175 mm︱injection plunger diameter 70,80,90 mm︱casting volume (DIN 24480) 450,636,856 cm ³︱volume cast pressure 335,260,203 kp/cm²︱casting area 656,846,1078 cm 2︱Traverse Stroke 230 mm︱
          Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a furnace from Rauch Typ MO200G/R gas heated and a used electric sprayer Spraymotion 611E. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 2200 kN
            clamping plate 755x755 mm
            distance between columns 500x500 mm
            weight of the machine ca. 8 t
            lock stroke 430 mm
            capacity of ejector 110 kN
            ejector stroke 100 mm
            height of form 250-600 mm
            column diameter 85 mm
            casting capacity 130 kN
            casting plunger stroke 175 mm
            injection plunger diameter 70,80,90 mm
            casting volume (DIN 24480) 450,636,856 cm ³
            volume cast pressure 335,260,203 kp/cm²
            casting area 656,846,1078 cm 2
            Traverse Stroke 230 mm
            Description :
            Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys.
            Available from used machine stock.
            The machine is equipped with a furnace from Rauch Typ MO200G/R gas heated and a used electric sprayer Spraymotion 611E.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 50


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-984177 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 50 - - 1992 - SBC 2

          Technical details
          closing pressure 600 kN︱clamping plate 460x460 mm︱distance between columns 300x300 mm︱weight of the machine ca. 4,5 t︱lock stroke 230 mm︱capacity of ejector 40 kN︱ejector stroke 70 mm︱height of form 120-350 mm︱column diameter 56 mm︱casting capacity 55 kN︱casting plunger stroke 130 m/m︱injection plunger diameter 45,50,55 mm︱casting volume (DIN 24480) 76,121,165 cm 2︱volume cast pressure 345,280,231 kp/cm²︱casting area 174,214,260 cm 2︱Traverse Stroke 150 m/m︱
          Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 600 kN
            clamping plate 460x460 mm
            distance between columns 300x300 mm
            weight of the machine ca. 4,5 t
            lock stroke 230 mm
            capacity of ejector 40 kN
            ejector stroke 70 mm
            height of form 120-350 mm
            column diameter 56 mm
            casting capacity 55 kN
            casting plunger stroke 130 m/m
            injection plunger diameter 45,50,55 mm
            casting volume (DIN 24480) 76,121,165 cm 2
            volume cast pressure 345,280,231 kp/cm²
            casting area 174,214,260 cm 2
            Traverse Stroke 150 m/m
            Description :
            Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys.
            Available from used machine stock.
            The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 20A


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-982995 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 20A - - 1989 - SBC 1

          Technical details
          closing pressure 240 kN︱clamping plate 380x380 mm︱distance between columns 250x250 mm︱weight of the machine ca. 3000 Kg︱lock stroke 180 mm︱capacity of ejector 30 t︱ejector stroke 50 mm︱height of form 120-300 mm︱column diameter 45 mm︱casting capacity 40 kN︱casting plunger stroke 85 mm︱injection plunger diameter 36, 40, 45 mm︱casting volume (DIN 24480) 39, 56, 79 cm³︱volume cast pressure 392, 317, 250 kp/cm²︱casting area 61, 76, 96 cm 2︱Traverse Stroke 105 mm︱
          Used Die Casting machine DAW 20A with SBC1 control for the use of zinc alloys. Without furnace. Available from used machine stock. Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 240 kN
            clamping plate 380x380 mm
            distance between columns 250x250 mm
            weight of the machine ca. 3000 Kg
            lock stroke 180 mm
            capacity of ejector 30 t
            ejector stroke 50 mm
            height of form 120-300 mm
            column diameter 45 mm
            casting capacity 40 kN
            casting plunger stroke 85 mm
            injection plunger diameter 36, 40, 45 mm
            casting volume (DIN 24480) 39, 56, 79 cm³
            volume cast pressure 392, 317, 250 kp/cm²
            casting area 61, 76, 96 cm 2
            Traverse Stroke 105 mm
            Description :
            Used Die Casting machine DAW 20A with SBC1 control for the use of zinc alloys. Without furnace.
            Available from used machine stock.

            Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used Diecasting machines Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 20A


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-982874 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 20A - - 1986 - SBC 1

          Technical details
          closing pressure 240 kN︱clamping plate 380x380 mm︱distance between columns 250x250 mm︱weight of the machine ca. 3000 t︱lock stroke 180 mm︱capacity of ejector 30 t︱ejector stroke 50 mm︱height of form 120-300 mm︱column diameter 45 mm︱casting capacity 40 kN︱casting plunger stroke 85 m/m︱injection plunger diameter 36, 40, 45 mm︱casting volume (DIN 24480) 39, 56, 79 cm³︱volume cast pressure 392, 317, 250 kp/cm²︱casting area 61, 76, 96 cm 2︱Traverse Stroke 105 m/m︱
          Used Die Casting machine DAW 20A with SBC1 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a gas furnace. Without sprayer. Recommendation from the manufacturer is a general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 240 kN
            clamping plate 380x380 mm
            distance between columns 250x250 mm
            weight of the machine ca. 3000 t
            lock stroke 180 mm
            capacity of ejector 30 t
            ejector stroke 50 mm
            height of form 120-300 mm
            column diameter 45 mm
            casting capacity 40 kN
            casting plunger stroke 85 m/m
            injection plunger diameter 36, 40, 45 mm
            casting volume (DIN 24480) 39, 56, 79 cm³
            volume cast pressure 392, 317, 250 kp/cm²
            casting area 61, 76, 96 cm 2
            Traverse Stroke 105 m/m
            Description :
            Used Die Casting machine DAW 20A with SBC1 control for the use of zinc alloys.
            Available from used machine stock.
            The machine is equipped with a gas furnace. Without sprayer.

            Recommendation from the manufacturer is a general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Oskar Frech GmbH  &  Co. KG   73614 - Schorndorf-Weiler Schorndorfer Straße 32 Deutschland
          Oskar Frech GmbH & Co. KG

          Schorndorfer Straße 32



          Contact Trader


            Oskar Frech GmbH & Co. KG
           Schorndorfer Straße 32
            73614 - Schorndorf-Weiler
            Deutschland
            +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
            Schultheiss.Daniel@frech.com
            www.frech.com
            Contact person:
          Herrn Daniel Schultheiß +49 (0) 7181 / 702 - 159

           




          Machine category


          Druckgußmaschine · Fräsmaschine - Horizontal · Förderband · Kaltkammerdruckgußmaschine - Horizontal · Motor · Schweißzubehör · Waage · Warmkammerdruckgußmaschine - Horizontal · Warmkammerdruckgußmaschine - Vertikal · Zubehör Druckgußmaschinen ·