'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Vertical panel saw

          Machinelist: Vertical panel saw


          Circular saw

          used Saws Circular saw ZIMMER CUT 402-1 SX


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010934 · Circular saw

          ZIMMER - CUT 402-1 SX - - NEU -

          Technical details
          400 x 32 mm︱capacity 90 degrees: round 145 mm︱capacity 90 degrees: square 130 x130 mm︱capacity 90 degrees: flat 300 x 80 mm︱capacity 45 degrees: round 105 mm︱capacity 45 degrees: square 115 x 115 mm︱capacity 45 degrees: flat 250 x 60 mm︱total power requirement 1,8 kW︱weight of the machine ca. 240 kg︱dimensions of the machine ca. 800 x 1100 x 1400 mm︱
          Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet
            400 x 32 mm
            capacity 90 degrees: round 145 mm
            capacity 90 degrees: square 130 x130 mm
            capacity 90 degrees: flat 300 x 80 mm
            capacity 45 degrees: round 105 mm
            capacity 45 degrees: square 115 x 115 mm
            capacity 45 degrees: flat 250 x 60 mm
            total power requirement 1,8 kW
            weight of the machine ca. 240 kg
            dimensions of the machine ca. 800 x 1100 x 1400 mm
            Description :
            Domestic equipments:
            - stepless, electronic speed control
            - Optional hydraulically controlled or manual belt arm lowering
            - Saw arm can be swiveled up to 60 ° right
            - quick release vice
            - Band guide with 8 ball bearings
            - Hydraulic saw blade clamping with clamping pressure display and strip break-off
            - Including coolant device
            - incl. machine cabinet


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Circular saw HUVEMA HU 300 TMS


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-509 · Circular saw

          HUVEMA - HU 300 TMS - - 2004 -

          Technical details
          cutting range 90°: 90 mm︱cutting range 45°: 75 mm︱Saw blade diameter 315 mm︱Table dimensions 800 x 500/400 mm︱Saw blade 30 mm︱machine weight ab. 45 kg︱dimensions 850 x 600 x 430 mm︱
            cutting range 90°: 90 mm
            cutting range 45°: 75 mm
            Saw blade diameter 315 mm
            Table dimensions 800 x 500/400 mm
            Saw blade 30 mm
            machine weight ab. 45 kg
            dimensions 850 x 600 x 430 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Circular saw unbekannt Compact 200


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-190916 · Circular saw

          unbekannt - Compact 200 - - -

          Technical details
          Sawblade tiltable °︱cutting width mm︱Motor output kW︱Cutting height mm︱Saw blade diameter mm︱Table dimensions mm︱Saw blade mm︱Dimensions (L/W/H) mm︱machine weight ab. kg︱
          Table size: 420 x 450 mm
          Table height: 215 mm
          Table swivels up to: 45
          Saw or cutting blade Ø: 200 mm
          here cutting depth: 47 mm
          electrical connection: alternating current 230 V
          Rhvzn8be
          weight: 14,5 kg
            Description :
            Table size: 420 x 450 mm

            Table height: 215 mm

            Table swivels up to: 45

            Saw or cutting blade Ø: 200 mm

            here cutting depth: 47 mm

            electrical connection: alternating current 230 V

            Rhvzn8be

            weight: 14,5 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Circular saw WMT Tisch 255


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-85110 · Circular saw

          WMT - Tisch 255 - - -

          Technical details
          Saw blade diameter 255 mm︱Sawblade tiltable 45 °︱Cutting height 75 mm︱Table dimensions 640 x 920 (ausgezogen) mm︱Saw blade 30 mm︱Motor output 1,6 kW︱connected load frequency 230 V︱machine weight ab. 32 kg︱Dimensions (L/W/H) 720 x 1080 x 920 mm︱
            Saw blade diameter 255 mm
            Sawblade tiltable 45 °
            Cutting height 75 mm
            Table dimensions 640 x 920 (ausgezogen) mm
            Saw blade 30 mm
            Motor output 1,6 kW
            connected load frequency 230 V
            machine weight ab. 32 kg
            Dimensions (L/W/H) 720 x 1080 x 920 mm
            Description :



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical panel saw

          used Saws Vertical panel saw HOLZ-HER 1205


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-20998 · Vertical panel saw

          HOLZ-HER - 1205 - - unbekannt -

          Technical details
          Cutting length 4300 mm︱Cutting height 1925 mm︱automatic nein ja/nein︱
            Cutting length 4300 mm
            Cutting height 1925 mm
            automatic nein ja/nein


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw ELCON Advance 215


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6777 · Vertical panel saw

          ELCON - Advance 215 - - Neu -

          Technical details
          Cutting length 5300 mm︱Cutting height 0-2.150, 80-2.050 mm︱automatic Option ja/nein︱
          ELCON precision panel saw type ADVANCE 215 Partnership Edition -------------------------------------- Technical description: Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm Cutting length: 5,300mm Cutting depth: 80mm (with clamps: 55mm) Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm. Motor: 5.5 kW, including automatic star-delta start Required air pressure: 6 bar Measurement reading for horizontal saw cuts: -over scale from 0 - 2,070mm -via strip cutting stop from 75 - 500mm Measurement reading for vertical saw cuts: -over scale from 0 - 1,300mm Extraction connection: 1 x 100mm 1 x 120mm Features: -ADVANCE clamping system, consisting of: 2 pneumatic clamps, those on vertical axes are motorized on a ball screw from above move down. The tongs carry plates weighing max. 150 kg - Torsion-free, free-standing machine frame -Round rod guide, vertical and horizontal -pneumatically yielding slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via hand wheel -Strip cutting stop -Manual programming rail with 5 sliding blocks -Pneumatic immersion of the saw unit -25 material support rolls -1 infeed and 1 outfeed roller -pneumatic workpiece clamping device between the support rollers -3 central support elements, folding out pneumatically -Pneumatic saw head locking -Control panel with document holder -Switch unit on the saw unit: start button, stop button -Tool cabinet -Lighting scale for vertical saw cuts Partnership Edition Features: -Digital display for the folding stop -Digital display for the saw unit with incremental function -pneumatically swiveling saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment and activation light -Cutting line laser -------------------------------------- Special price "Partnership Edition" ex works in this version: on request! -------------------------------------- Freight, installation and instruction costs (if the machine is not must be dismantled) - only applies within Germany. unloading and Lateral transport to the installation site is carried out by the customer. Price: EUR 2,750.00 plus statutory VAT -------------------------------------- Options with extra charge: Equipment package II - automatic feed: -Automatic feed with infinitely variable speed from 0-20m/min. -Adjustment of the traverse path to the workpiece size -Touch screen screen -Horizontal section positioning -automatic trimming process Price: EUR 14,990.00 plus statutory VAT Equipment package III (based on package II), consisting of: - Positioning and programmable folding stop - automatic interface positioning saw tree - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up 700mm, the saw tree moves to the interface 2) Price: EUR 9,590.00 plus statutory VAT Cutting length 4,300mm instead of 5,300mm Price: EUR 0.00 plus statutory VAT ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the plate: 225 kg Price: EUR 8,890.00 plus statutory VAT Additional workpiece clamping device Price: EUR 590.00 plus statutory VAT 3 pneumatically usable plate setting buffers with switches on the machine frame Price: EUR 990.00 plus statutory VAT GERONNIMO plate wagon Price: EUR 1,490.00 plus statutory VAT GERONNE terminal, including: cutting optimization, operating instructions, Spare parts list and charger (without machine connection) Price: EUR 590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 5300 mm
            Cutting height 0-2.150, 80-2.050 mm
            automatic Option ja/nein
            Description :
            ELCON precision panel saw type ADVANCE 215 Partnership Edition
            --------------------------------------
            Technical description:
            Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm
            Cutting length: 5,300mm
            Cutting depth: 80mm (with clamps: 55mm)
            Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth
            Saw blade rotation: 5,000 rpm.
            Motor: 5.5 kW, including automatic star-delta start
            Required air pressure: 6 bar
            Measurement reading for horizontal saw cuts:
            -over scale from 0 - 2,070mm
            -via strip cutting stop from 75 - 500mm
            Measurement reading for vertical saw cuts:
            -over scale from 0 - 1,300mm
            Extraction connection: 1 x 100mm 1 x 120mm

            Features:
            -ADVANCE clamping system, consisting of: 2 pneumatic clamps,
            those on vertical axes are motorized on a ball screw from above
            move down. The tongs carry plates weighing
            max. 150 kg
            - Torsion-free, free-standing machine frame
            -Round rod guide, vertical and horizontal
            -pneumatically yielding slatted frame
            -Finely adjustable folding stop with stop extension
            -Fine adjustment for horizontal saw cuts via hand wheel
            -Strip cutting stop
            -Manual programming rail with 5 sliding blocks
            -Pneumatic immersion of the saw unit
            -25 material support rolls
            -1 infeed and 1 outfeed roller
            -pneumatic workpiece clamping device between the support rollers
            -3 central support elements, folding out pneumatically
            -Pneumatic saw head locking
            -Control panel with document holder
            -Switch unit on the saw unit: start button, stop button
            -Tool cabinet
            -Lighting scale for vertical saw cuts

            Partnership Edition Features:
            -Digital display for the folding stop
            -Digital display for the saw unit with incremental function
            -pneumatically swiveling saw unit
            -Scoring system with controlled counter-air nozzle, numerical display for
            scoring
            or groove depth adjustment and activation light
            -Cutting line laser
            --------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            --------------------------------------
            Freight, installation and instruction costs (if the machine is not
            must be dismantled) - only applies within Germany. unloading and
            Lateral transport to the installation site is carried out by the customer.
            Price: EUR 2,750.00 plus statutory VAT
            --------------------------------------
            Options with extra charge:

            Equipment package II - automatic feed:
            -Automatic feed with infinitely variable speed from
            0-20m/min.
            -Adjustment of the traverse path to the workpiece size
            -Touch screen screen
            -Horizontal section positioning
            -automatic trimming process
            Price: EUR 14,990.00 plus statutory VAT

            Equipment package III (based on package II), consisting of:
            - Positioning and programmable folding stop
            - automatic interface positioning saw tree
            - Coupling of the two axes (e.g.: input 2,700mm, the stop moves up
            700mm, the saw tree moves to the interface 2)
            Price: EUR 9,590.00 plus statutory VAT

            Cutting length 4,300mm instead of 5,300mm
            Price: EUR 0.00 plus statutory VAT

            ADVANCE clamping system with 3 clamps instead of 2 clamps, max. weight of the
            plate: 225
            kg
            Price: EUR 8,890.00 plus statutory VAT

            Additional workpiece clamping device
            Price: EUR 590.00 plus statutory VAT

            3 pneumatically usable plate setting buffers with switches on the machine frame
            Price: EUR 990.00 plus statutory VAT

            GERONNIMO plate wagon
            Price: EUR 1,490.00 plus statutory VAT

            GERONNE terminal, including: cutting optimization, operating instructions,
            Spare parts list and charger (without machine connection)
            Price: EUR 590.00 plus statutory VAT
            -----------------------------------------------------
            Technical information according to the manufacturer - without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw ELCON D 215 Partnership Edition


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6769 · Vertical panel saw

          ELCON - D 215 Partnership Edition - - Neu -

          Technical details
          Cutting length 4300 mm︱Cutting height 2150 mm︱automatic ,
          ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----------------------------------------------------- Special price "Partnership Edition" ex works in this version: on request! ----------------------------------------------------- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----------------------------------------------------- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----------------------------------------------------- Technical information according to the manufacturer - without guarantee!
            Cutting length 4300 mm
            Cutting height 2150 mm
            automatic ,
            Description :
            ELCON precision panel saw type D 215
            -----------------------------------------------------
            Cutting height: vertical 2,150mm, horizontal 2,100mm
            Cutting length: 4,300mm
            -----------------------------------------------------
            Technical description:

            Cutting depth: max. 60mm
            Saw blade outlet behind the plate: max. 25mm
            Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth
            Saw blade rotation: 5,100 rpm.
            Motor: 4 kW (S 6)

            Measurement reading for:
            horizontal saw cuts: via scale and strip cutting stop
            vertical saw cuts: above scale
            Extraction nozzle: 100 & 80mm
            Required air pressure: 6 bar

            Features:
            -Material support with 1 roll per meter of cutting length, switched on and off
            by foot pedal
            suspendable
            -1 infeed and outfeed roller
            -pneumatically yielding slatted frame
            -Central support, 1 support element per meter of cutting length, individually
            manually
            fold out
            -Scoring system: double cut of the main saw blade
            - Torsion-free, free-standing machine frame
            -Two folding stops for vertical saw cuts (above and
            below the middle support)
            -----------------------------------------------------
            Special price "Partnership Edition" ex works in this version: on request!
            -----------------------------------------------------

            plus pre-freight, freight, installation and instruction
            (if the machine does not have to be dismantled)
            Applies only within Germany.
            Unloading and cross transport to
            Installation location is determined by the customer.

            Price: EUR 1,900.00 plus statutory VAT
            -----------------------------------------------------
            Options with extra charge:

            Cutting length 5,300mm instead of 4,300mm
            Order number: ELCO0075/O049

            Surcharge: EUR 2,590.00 plus statutory VAT
            -----------------------------------------------------

            Technical information according to the manufacturer - without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw Elcon Multicut


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-20063 · Vertical panel saw

          Elcon - Multicut - - 2022 -

          Technical details
          Cutting length 5.300 mm︱Cutting height 2.100 mm︱automatic nein ja/nein︱
            Cutting length 5.300 mm
            Cutting height 2.100 mm
            automatic nein ja/nein


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Vertical panel saw HOLZHER 1215 Super Cut


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-716138 · Vertical panel saw

          HOLZHER - 1215 Super Cut - - 1992 -

          Technical details
          Cutting length 2200 mm︱Cutting height 30 mm︱automatic nein ja/nein︱
            Cutting length 2200 mm
            Cutting height 30 mm
            automatic nein ja/nein


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          ELCON - HOLZ-HER - HOLZHER -