'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sanding machine

          Machinelist: Sanding machine


          Frame press

          used Window production: wood Frame press S&S Bavaria 2000 L - Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6794 · Frame press

          S&S - Bavaria 2000 L - Video - - Vorführpresse -

          Technical details
          Working width 4500 mm︱Working height 3000 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5600x1350x3550 mm︱Weight 3000 kg︱
          S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ------------------------ Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: - lower insertion height for sashes with width <550 mm; approx. 1280 mm - Insertion height upper edge of upper horizontal frame wood up to pressing height 2,750mm; approx. 1,620 mm - Insertion height upper edge of upper horizontal frame wood pressing height >2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm Item 00001147 ------------------------ 1 medium pressure bar complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 00000112 ----------------------- infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for transverse pressure device Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 000000391 --------------------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Shut-off valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plates attachable for pressing up to 60 degrees Item 00000631 ----------------------- double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for small dimension pressing for bridging the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and additional pressing cycle for pressing "dowel connection" or "Plugtec", changeable via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000632 ----------------------- Electronic pressure preselection device For 4 different, permanently programmed pressure levels (can be changed at any time), and an additional freely selectable one Pressure level directly on the control panel Item 00001002 ----------------------- 6x printing unit support and printing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and abutments covered with plastic --------------------------------- Total price in the above version: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price per piece: 260.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4500 mm
            Working height 3000 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5600x1350x3550 mm
            Weight 3000 kg
            Description :
            S&S frame press Bavaria 2000 L
            ---------------------------------

            With automatic pressing cycle + manual control
            for corner connections tenon + slots and dowel connection / mortised tenon,
            can be changed using a selector switch on the control cabinet.
            With basic equipment for the optional use of counter profiles if the sash is on
            loose part to be folded over.

            CE version
            Basic machine in the strongest welded frame,
            with thick-walled special hollow profiles.
            Guideways of the pressure bars for the press corners
            in a low-abrasion finish.

            Fast, smooth, manual width adjustment
            by ball-bearing carriage, fixation in 50 mm
            Hole grid, optional motorized width adjustment with
            with hydraulic clamping (surcharge).

            Height adjustment and pressing by long-stroke cylinder
            in one work cycle. Right-hand press corners with
            integrated horizontal cylinders, therefore none
            vertical positioning of the horizontal printing cylinders
            necessary, avoiding cylinder collisions.
            Abutments below in several positions on each
            most favorable insertion height adjustable.

            3 KW compact hydraulic system with integrated
            Control block, variable pressure control
            from 20 - 120 bar, manometer

            Control via push button with separate control circuits
            for the vertical and horizontal press cylinders
            on a freely movable control panel.

            2 vertical press cylinders, double-acting, stroke on
            Adjusted working height, piston diameter 60 mm
            Pressure force per cylinder max. 2100 kg
            2 horizontal press cylinders, double-acting,
            80 mm stroke, piston diameter 40 mm
            Pressure force per cylinder max. 1250 kg
            Abutment and pressure plate depth 100 mm

            Control cabinet on the machine base on the left, 400 volts, 50 Hz
            Machine with ready-to-connect plug 16 A

            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: length x height = 4,500 mm x 2,750 mm
            A notice:
            actual working size: 4,500 x 3,000 mm (length x height=
            Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height)

            Item 0000127
            ------------------------
            Press height modification 2750/3000 mm a
            The machine is supplied with a 3,000 mm high pressure bar
            The cylinder attachment and the positions of the lower press corners
            however, correspond to the version with a press height of 2,750 mm.
            By installing 3 pieces of 300 mm long piston rod extensions
            the max. pressing height can be increased to 3,000 mm.
            Using the tools provided, it is possible to convert the
            Machine possible within approx. 10 minutes.

            Insertion heights:
            - lower insertion height for sashes with width <550 mm; approx. 1280 mm
            - Insertion height upper edge of upper horizontal frame wood up to pressing
            height
            2,750mm; approx. 1,620 mm
            - Insertion height upper edge of upper horizontal frame wood pressing height
            >2,750mm; approx. 1,920 mm (piston rod extension installed)

            Scope of delivery:
            1 piece support plate
            3 piston rod extensions 300 mm
            1 open-end wrench size 30
            1 ratchet with socket wrench size. 24
            1 piece holder for piston rod extensions and tool

            Hints:
            - The height is corrected for machines with a positioning function
            by parameter switching. Operation of the machine with the
            built-in piston rod extensions is replaced by another
            wallpaper displayed.

            - Total height of the machine approx. 3,400 mm

            Item 00001147
            ------------------------
            1 medium pressure bar complete with pressure cylinder,
            Pressure hose and shut-off valve up to 3,000 mm high

            Item 00000471
            ------------------------
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 00000112
            -----------------------
            infinitely height-adjustable transverse pressure device,
            complete with pressure cylinder and abutment,
            Throttle and shut-off valve

            Item 00000481
            ------------------------
            Individual pressure control for transverse pressure device
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 000000391
            ---------------------------------------
            Shut-off valve on the 3rd vertical cylinder

            Item 00000391
            -----------------------
            Shut-off valve on the upper horizontal cylinder


            Item 00001005
            ------------------------
            3 x inclined window controls for vertical cylinders

            Item 00000302
            -----------------------
            3x pendulum pressure plates attachable
            for pressing up to 60 degrees

            Item 00000631
            -----------------------
            double pendulum pressure plate
            for pointed windows (triangle)

            Item 00000113
            -----------------------
            2 x extension for pendulum pressure plate
            for pointed windows (triangle)

            Item 00000057
            -----------------------
            Intermediate allowance for small dimension pressing
            for bridging the 1st pressure bar,
            including shut-off valve on the 1st vertical cylinder

            Item 00000100
            -----------------------
            Motorized width adjustment with digital display

            Item 00001001
            -----------------------
            Machine equipped for pressing
            of "tenons + slots" and additional pressing cycle
            for pressing "dowel connection" or
            "Plugtec", changeable via selector switch on the control cabinet

            Item 00001003
            -----------------------
            Basic equipment for counter profiles

            Item 00000632
            -----------------------
            Electronic pressure preselection device
            For 4 different, permanently programmed pressure levels
            (can be changed at any time), and an additional freely selectable one
            Pressure level directly on the control panel

            Item 00001002
            -----------------------
            6x printing unit support and printing plate depth 120 mm

            Item 00099000
            -----------------------
            all pressure plates and abutments covered with plastic

            ---------------------------------
            Total price in the above version: on request!


            Options with additional prices:
            -----------------------

            Item 00001004
            -----------------------
            Counter profiles, price per piece: 260.00 euros

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6792 · Frame press

          S&S - RP 2000 - - Vorführmaschine -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5300 x 1250 x 3330 mm︱
          S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: -------------------------------------- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 00000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) -------------------------------------- Total price in the above version ex works: On request! -------------------------------------- Options: Article 00000042 1.00 pc Machine that can be dismantled i.e. H. Pressure bar on pallet -------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5300 x 1250 x 3330 mm
            Description :
            S&S frame press type RP 2000,
            -----------------------------
            C E - version
            Stable frame welded construction made of thick-walled special hollow profiles,
            Sliding carriage and pressure bar with 50 mm hole pattern.
            Continuous abutment on the left for width compression, lower abutment
            in two levels.
            Vertical press cylinder on special pressure bar with one-hand quick adjustment
            with weight compensation in the 50 mm hole pattern, height-adjustable, long
            Sliding carriages ensure the
            permanent absorption of high pressing forces.
            Fast, smooth width adjustment with ball-bearing carriage
            Central locking, fixation in 50 mm hole pattern.
            Upper horizontal press cylinder infinitely adjustable in height and with
            Equipped with counterbalance.
            Lower horizontal press cylinder with center holes for the two
            Abutment levels, with weight compensation.
            Abutment and pressure plate depth 100 mm
            Printing plate and support width 130 mm
            Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d =
            50 mm, stroke 120 mm double-acting, with counterweight and
            One-hand quick adjustment, 2 pieces
            Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with
            weight balancing; 2 manual control valves,
            Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400
            to 2400 kg
            pressure
            vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage.
            Complete with electrical connection.
            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: 4000mm x 2600mm (length x height)
            Required space: 5300 x 1250 x 3330 mm (L x W x H)

            Machine including the following options:
            --------------------------------------

            Article 00000374 1.00 pc
            Medium pressure bar with pressure cylinder
            double-acting, weight compensation,
            pressure hose and shut-off valve
            up to 2600 mm high

            Article 00000047 1.00 pc
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000038 1.00 pc
            Cross printing device complete with pressure cylinder
            double-acting, weight compensation, pressure hose
            and shut-off valve
            There is no weight compensation on the lower horizontal cylinder

            Article 00000048 1.00 pc
            Individual pressure control for transverse pressure device,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000039 1.00 pc
            Shut-off valve on the 3rd vertical cylinder

            Article 00000039 1.00 pc
            Shut-off valve on the upper horizontal cylinder

            Article 00000050 1.00 pc
            Width allowance for compression
            of small frames to bridge the
            1st pressure beam, including shut-off valve on the 1st vertical cylinder

            Article 00003117 1.00 pc
            Basic equipment for counter profiles
            The space required in height increases by 100 mm

            Item 00099000
            All pressure plates and abutments
            covered with plastic

            Article 00000049 1.00 pc
            Triangle studio window pressing device
            consisting of: locking device of
            Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates

            Article 00000063 1.00 pc
            double pendulum pressure plate
            for pointed windows (triangle)

            --------------------------------------

            Total price in the above version ex works: On request!

            --------------------------------------
            Options:
            Article 00000042 1.00 pc
            Machine that can be dismantled
            i.e. H. Pressure bar on pallet
            --------------------------------------

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Multipress Lochplattenpresse


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5956 · Frame press

          S&S - Multipress Lochplattenpresse - - neu -

          Technical details
          Working width 3500 mm︱Working height 2650 mm︱Number of cylinders nach Wahl St.︱
            Working width 3500 mm
            Working height 2650 mm
            Number of cylinders nach Wahl St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5845 · Frame press

          S&S - RP 2000 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Super-Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6121 · Frame press

          S&S - Super-Video - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria 2000 L  -Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6496 · Frame press

          S&S - Bavaria 2000 L -Video - - neu -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 5 St.︱weight 2000 kg︱Dimensions (L/W/H) 5550x1300x3000 mm︱
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 5 St.
            weight 2000 kg
            Dimensions (L/W/H) 5550x1300x3000 mm
            Description :



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S T 35


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6030 · Frame press

          S&S - T 35 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
          Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
            Description :
            Stable frame welded construction of thick-walled
            Special hollow profiles , sliding table and pressure beam with
            50 mm hole pattern .

            On the left side continuous abutment for grouting the wide ,
            lower abutment in 2 levels.

            Vertical pressing cylinder on specialty bar with one-
            quick adjustment with weight compensation in the 50 mm hole pattern
            adjustable in height. Long sliding table ensure the
            continuous recording of high jacking forces .

            Fast, smooth width adjustment with ball bearing
            Carriage with central fixation in 50 mm hole pattern.

            Upper horizontal press cylinder infinitely adjustable in height and
            equipped with counterbalance .

            Lower horizontal pressing cylinders with bore for
            two abutments levels without weight compensation .

            Abutment and pressure plate depth 100 mm

            Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
            d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
            One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
            stroke,
            120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
            Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
            4200 kg compression force vertically. With 3 kW three-phase motor for 400
            volts , 50 Hz
            Operating voltage.

            Complete with electrical connection .

            Painting RAL 7035 anthracite gray with light gray RAL 7016 .

            (technical details according to manufacturer - without guarantee ! )

            The detailed technical description can be found in the attached pdf file


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press SCHAFBERGER + SPROEDHUBER RP 1200


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6803 · Frame press

          SCHAFBERGER + SPROEDHUBER - RP 1200 - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱
          S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            Description :
            S+S hydraulic frame press RP 1200
            -------------------------------------
            Working width 3,550 mm
            Working height 2,250 mm
            -------------------------------------
            with medium pressure beam
            -------------------------------------
            still in use
            -------------------------------------

            Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2719 · Frame press

          HESS - Speedy Video - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱loading dimensions L x W x H 4500 x 900 x 2600 mm︱
          Hess Speedy frame press -------------------------------------- Press will be checekd Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            loading dimensions L x W x H 4500 x 900 x 2600 mm
            Description :
            Hess Speedy frame press
            --------------------------------------
            Press will be checekd

            Insertion dimension / pressing length max. 3,550 mm
            Insertion dimension / pressing height max. 2,250 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            3 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm
            Pressure force per cylinder 1250 kN / 12500 N

            Printing plate depth 100 mm width 140 mm

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 2.2 kW / 400V

            Control for studio window gluing

            2 pendulum pressure plates 45 degrees

            Machine dimensions W=4500 mm, D=900 mm, H=2600 mm
            Weight approx. 1800 kg

            Photo and video not original, shows press of same type.

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Quickstep_Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2701 · Frame press

          HESS - Quickstep_Video - - gebraucht - Siemens S7-1200

          Technical details
          Working width 3500 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱control Siemens S7-1200
          #2701 Hess Quickstep frame press -------------------------------------- Technical data summary (please inquire about any additional accessories included) -------------------------------------- Generally -------------------------------------- Working width: 3500 mm Working height: 2250 mm Total power requirement: 3 kW Installation dimensions: 4500x980x2610 mm Loading dimensions: 4500 x 980 x 2610 mm Machine weight, approx.: 2000 kg Characteristics: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long-stroke cylinder) > Horizontal adjustment type: electrical > 1 medium pressure bar > Printing plate depth 100mm width 140mm > 3 pcs. pendulum pressure plates > 1 piece small parts allowance Other features -------------------------------------- Opto-electronics, i.e. fully automatic measurement and setting, horizontal Siemens S7-1200 control (technical information according to the manufacturer - no guarantee!) Pictures and video show the original press stock number 2701.
            Working width 3500 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            control Siemens S7-1200
            Description :
            #2701 Hess Quickstep frame press
            --------------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            --------------------------------------

            Generally
            --------------------------------------
            Working width: 3500 mm
            Working height: 2250 mm
            Total power requirement: 3 kW
            Installation dimensions: 4500x980x2610 mm
            Loading dimensions: 4500 x 980 x 2610 mm
            Machine weight, approx.: 2000 kg

            Characteristics:
            --------------------------------------
            > hydraulic: yes
            > Number of vertical press cylinders: 3
            > Number of horizontal press cylinders: 2
            > Vertical adjustment type: electric (long-stroke cylinder)
            > Horizontal adjustment type: electrical
            > 1 medium pressure bar
            > Printing plate depth 100mm width 140mm
            > 3 pcs. pendulum pressure plates
            > 1 piece small parts allowance

            Other features
            --------------------------------------
            Opto-electronics, i.e. fully automatic measurement
            and setting, horizontal

            Siemens S7-1200 control

            (technical information according to the manufacturer - no guarantee!)

            Pictures and video show the original press stock number 2701.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy, 2 Mitteldruckbalken


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2730 · Frame press

          HESS - Speedy, 2 Mitteldruckbalken - - gebraucht -

          Technical details
          Working width 3050 mm︱Working height 2050 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 3970x950x2400 mm︱
          Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine is currently being checked - picture not original, shows same model. Video shows press from our archive (technical data according to the manufacturer - no guarantee!)
            Working width 3050 mm
            Working height 2050 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 3970x950x2400 mm
            Description :
            Hess Speedy frame press with 2 medium pressure beams!
            --------------------------------------

            Insertion dimension / pressing length max. 3,050 mm
            Insertion dimension / pressing height max. 2,050 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            4 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm

            Pressure force per cylinder 1250 kN / 12500 N

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 3.0 kW / 400V

            Machine dimensions W=3970 mm, D=950 mm, H=2400 mm
            Weight approx. 1680 kg

            Machine is currently being checked - picture not original, shows same model.
            Video shows press from our archive

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press CASOLIN Euro


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6821 · Frame press

          CASOLIN - Euro - - 2010 -

          Technical details
          Working width 6000 mm︱Working height 3000 mm︱Number of cylinders 4 St.︱loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm︱weight 3700 kg︱
          Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO" Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!)
            Working width 6000 mm
            Working height 3000 mm
            Number of cylinders 4 St.
            loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm
            weight 3700 kg
            Description :
            Casolin Euro
            -------------------------
            HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO"

            Frame press in an extremely stable steel construction. The machine also allows
            the pressing of already milled wing and frame parts.

            Working dimensions: 6000mm x 3000mm

            Installation dimensions:
            Total length: approx. 7,175 mm
            Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed
            maximum pressing height above) = 4,130 mm

            Loading dimensions:
            Length: approx. 7,175 mm
            Height: approx. 3,790 mm
            Weight: approx. 3,700 kg

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 20.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG Euronova Qickomat


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6822 · Frame press

          MAWEG - Euronova Qickomat - - 1996 -

          Technical details
          Working width 3648 mm︱Working height 2485 mm︱Number of cylinders 6 St.︱
          Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!)
            Working width 3648 mm
            Working height 2485 mm
            Number of cylinders 6 St.
            Description :
            Maweg Euronova Quickomat frame press
            ----------------------------
            with automatic measurement adjustment.

            Cylinder max. opened (maximum working dimensions)
            W 3,648mm x H 2,485mm

            Total length: 4,720mm + 400mm control unit
            Total height: 3,550 mm

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG HILDEBRAND Euro-Z


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6810 · Frame press

          MAWEG HILDEBRAND - Euro-Z - - 1990 -

          Technical details
          Working width 3250 mm︱Working height 2300 mm︱Number of cylinders 7 St.︱Dimensions (L/W/H) 4400 x 1050 x 3200 mm︱loading dimensions L x W x H 4400 x 1050 x 2950 mm︱
          Maweg Hildebrand frame press EURO-Z -------------------------------------- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)
            Working width 3250 mm
            Working height 2300 mm
            Number of cylinders 7 St.
            Dimensions (L/W/H) 4400 x 1050 x 3200 mm
            loading dimensions L x W x H 4400 x 1050 x 2950 mm
            Description :
            Maweg Hildebrand frame press EURO-Z
            --------------------------------------
            Press with 2 medium pressure beams!

            External dimensions approx.:
            Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm
            Loading height: 2,950 mm

            Pressing dimensions: length = 3,250 mm, height = 2,300 mm
            Printing plates: depth=100 mm, width=120 mm

            Selling ex location as stated.
            You can see the press in use until around the end of January 2024.

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Sanding machine

          used Window production: wood Sanding machine HESS BS200


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-26048 · Sanding machine

          HESS - BS200 - - unbekannt -

          Technical details
          Number of sanding units 2 st.︱sanding width ca. 180 mm︱Sanding height max. 12 - 140 mm︱
            Number of sanding units 2 st.
            sanding width ca. 180 mm
            Sanding height max. 12 - 140 mm


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • 2.900 €
          Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER Leistomat SD


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2729 · Sanding machine

          LÖWER - Leistomat SD - - neuwertig -

          Technical details
          Number of sanding units 8 st.︱sanding width 180 (260) mm︱Sanding height max. 160 mm︱Dimensions (length / width) 3065x1600x1900 mm︱weight of the machine ca. 1500 kg︱
          Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version -------------------------------- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) --------------------------------- (Technical description according to the manufacturer - no guarantee!)
            Number of sanding units 8 st.
            sanding width 180 (260) mm
            Sanding height max. 160 mm
            Dimensions (length / width) 3065x1600x1900 mm
            weight of the machine ca. 1500 kg
            Description :
            Löwer Leistomad SD
            Window single wood intermediate sanding machine
            ---------------------------------
            Machine factory tested by Löwer!

            Automatic fine grinding machine for wood grinding (smoothing, defibering and
            Edge breaking) or intermediate sanding of profiled window bars. With soft disc
            Technology for the visible surfaces as well as automatically safe profile and
            Width adjustment.

            - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm
            - 1 softisc unit Ø=200mm above 0.75kW,
            - 1 slat roller unit L=200mm above 0.75kW

            - 1 soft disc unit Ø=200mm below 0.75kW,
            - 1 lamella roller unit L=200mm below 0.75kW,
            - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm

            - Linear guidance of all grinding units via linear ball bearing sets
            hardened waves

            - Time-controlled immersion of all lamella roller units directly above
            the incoming workpiece edges. By immersing it is possible
            To be able to deliver aggregates deeper into the profiles.

            - Motorized workpiece thickness adjustment of the machine

            - variable grinding flap speed via frequency converter to adjust the
            Grinding intensity using frequency converters (separately for discs,
            surface rollers and side rollers)

            - Disc aggregates as soft discs with Velcro fasteners for grinding discs
            (wood pulp)

            - Feed via three lower and one upper conveyor belt and spring-loaded
            Pressure rollers with continuous speed 5-15m/min

            - Parameters that can be set using the touch panel are workpiece thickness and
            workpiece width
            (left side units individually), immersion depth of side units,
            Spindle speed, feed speed

            - Saving the parameters as machine programs in program mode

            - Working in automatic mode with non-contact
            Workpiece width detection and profile detection as well as automatic
            Adjustment of the sanding units to the workpiece width and profile shape
            (Workpiece height is set in advance)

            - pneumatically clocked driven feed roller, automatic clamping
            of the workpiece as well as retraction after unit adjustment

            - Red/green indicator lights to indicate operational readiness

            - shortest workpiece length 380mm

            - Transport belt width 200mm

            - max. workpiece width 180mm

            - Workpiece height 12-120mm

            - Suction connection 5 x 100mm diameter

            - Sensor-controlled tool blow-off directly on the discs

            - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length:
            3800mm (including inlet roller conveyor with stop for Leistomat SD)

            - Weight: approx. 1500 kg

            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar

            - CE version
            --------------------------------

            Included options:

            Adjust the machine as follows:
            - max. workpiece thickness: 160mm

            - max. workpiece width: 260mm (in the transshipment process, workpieces must be
            2x
            be allowed through) Transport belt width remains at 200mm

            - Side units with grinding height 120mm instead of 100mm

            - more powerful engines for side units 0.75kw instead of 0.37

            - larger frequency converters for the side units


            Quick release disc spindle side
            for quick tool changes
            for DiscMaster 4TD or CrossMaster 2TD
            (only for clockwise rotation)

            Quick release disc tool
            for Softdisc, Combidisc or Mediumdisc Ø 250mm
            (only for clockwise rotation)
            ---------------------------------

            (Technical description according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD QL 4-8


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5452 · Sanding machine

          QUICKWOOD - QL 4-8 - - neu -

          Technical details
          Number of sanding units 8 St.︱sanding width 300 mm︱Sanding height max. 100 mm︱
          Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine ------------------------------------------------------------------------------------------------------------- Maschine zur Längsholzbearbeitung - Lose Fasern werden von der Oberfläche entfernt - Erhebliche Reduzierung der Faserbildung nach der Grundierung - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur - Bessere Tiefenwirkung im Holz - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz - Stufenlose Einstellungen aller Geschwindigkeiten - Leichter Werkzeugwechsel durch abnehmbare Spindeln - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung - Optionale PLC-Steuerung vorgesehen Einsatzmöglichkeiten - Fensterflügel- und - Rahmeneinzelteile - Glasleisten - Profilbretter - Kranzprofile - Verkleidungen - Profilierte Leisten Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 8 St.
            sanding width 300 mm
            Sanding height max. 100 mm
            Description :
            Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine
            -------------------------------------------------------------------------------------------------------------

            Maschine zur Längsholzbearbeitung
            - Lose Fasern werden von der Oberfläche entfernt
            - Erhebliche Reduzierung der Faserbildung nach der Grundierung
            - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur
            - Bessere Tiefenwirkung im Holz
            - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz
            - Stufenlose Einstellungen aller Geschwindigkeiten
            - Leichter Werkzeugwechsel durch abnehmbare Spindeln
            - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite
            - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung
            - Optionale PLC-Steuerung vorgesehen

            Einsatzmöglichkeiten
            - Fensterflügel- und
            - Rahmeneinzelteile
            - Glasleisten
            - Profilbretter
            - Kranzprofile
            - Verkleidungen
            - Profilierte Leisten

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD ROV 2600


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5453 · Sanding machine

          QUICKWOOD - ROV 2600 - - neu -

          Technical details
          Number of sanding units 32 St.︱sanding width 2600 mm︱Sanding height max. 150 mm︱
          Quckwood ROV 2600 vertikale Zwischenschliffmaschine ------------------------------------------------------------------------------- Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren, Möbelteilen am Hängeförderer. - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite. - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine. - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen. - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine. - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften. - Hohe Werkzeugstandzeit. Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 32 St.
            sanding width 2600 mm
            Sanding height max. 150 mm
            Description :
            Quckwood ROV 2600 vertikale Zwischenschliffmaschine
            -------------------------------------------------------------------------------

            Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren,
            Möbelteilen am Hängeförderer.

            - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite.
            - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine.
            - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen.
            - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine.
            - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften.
            - Hohe Werkzeugstandzeit.

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER MiniSpin N


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6006 · Sanding machine

          LÖWER - MiniSpin N - - neu -

          Technical details
          Number of sanding units 1 st.︱sanding width 150 mm︱Sanding height max. 150 mm︱
          Loewer edge finishing machine MiniSpin N Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush <300 mm Frequency converter for stepless adjustment of the Spindle speed 200-800 rpm Table size 400 x 800 mm two directions of rotation selectable Operating voltage 110/240 V 50/60 Hz Exhaust connection D = 100 mm Weight 100 kg including grooved body D = 180, L = 150 placement with SmartFlex grinding blades CE - execution (technical details according to manufacturer - without guarantee!)
            Number of sanding units 1 st.
            sanding width 150 mm
            Sanding height max. 150 mm
            Description :
            Loewer edge finishing machine MiniSpin N

            Machines for finishing and fine sanding of
            Edges and profiles with a grinding spindle
            horizontal or vertical.

            Motor 0,75 KW

            Spindle in vertical position for machining edges

            Pivoted spindle in horizontal position, laterally
            etc. for processing longer profile bars or
            Conjunction with a combined grinding head for grinding
            of edges with a grinding disc blades

            Grinding head swiveling + / - 20 ° for editing
            oblique lines

            Working height / width 150 mm

            max. Diameter roller / brush <300 mm

            Frequency converter for stepless adjustment of the
            Spindle speed 200-800 rpm

            Table size 400 x 800 mm

            two directions of rotation selectable

            Operating voltage 110/240 V 50/60 Hz

            Exhaust connection D = 100 mm

            Weight 100 kg

            including grooved body D = 180, L = 150 placement
            with SmartFlex grinding blades

            CE - execution

            (technical details according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER HBS 402


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6246 · Sanding machine

          LÖWER - HBS 402 - - neu -

          Technical details
          Number of sanding units 2 st.︱sanding width 390 mm︱Sanding height max. 390 mm︱
          LÖWER BeamSander HBS 402 -------------------------------- Single-sided belt sander for sanding beams, Glued beams and other bar-shaped workpieces Wood with two sanding units from above. - constant working height enables the use of Roller conveyors in front of and behind the machine - heavy version with cast table - Conveyor belt feed with heavy pressure rollers - Calibration unit with steel roller - Fine grinding unit with fixed calibration sanding shoe - Working width 390mm - Workpiece thickness 4mm - 390mm 1. Grinding unit (calibration) - heavy steel roller with 200mm diameter - stable roller bearing - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Chip removal depending on the belt grain size up to 2mm 2. Grinding unit (fine grinding) - Calibration sanding shoe CERMET coated wear and maintenance free - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Electric motorized height adjustment of both grinding units with three-phase motor 0.37 kW including digital display - continuous workpiece feed using a geared motor and Frequency converter 4-20 m/min - Workpiece thickness scanning via contact roller - Inlet contact with EMERGENCY STOP interruption - Suction nozzle with connection diameter 2 x 150mm - Length x width x height (mm): 1400x1200x2200 - Weight: 1000kg - Voltage 400 volts, 50Hz, 3P, air connection 6 bar dust tested, CE version --------------------------------- Price of the above machine on request! --------------------------------- Special accessories with additional costs: Feed reversal including pneumatically guided conveyor belt and pneumatic excavation of the units during return Heavy roller conveyor HBS 500mm width, 2m long Ball bearing rollers diameter 60mm, steel tube galvanized with spring axle 12mm, load capacity per roller 80kg, Roll pitch 250mm, roll width 500mm, height adjustable Support feet per meter of length, track height 850mm +/- 60mm Roll cover according to HBG (required for machine with automatic feed) --------------------------------- Prices of the above-mentioned special accessories on request! --------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 2 st.
            sanding width 390 mm
            Sanding height max. 390 mm
            Description :
            LÖWER BeamSander HBS 402
            --------------------------------
            Single-sided belt sander for sanding beams,
            Glued beams and other bar-shaped workpieces
            Wood with two sanding units from above.
            - constant working height enables the use of
            Roller conveyors in front of and behind the machine
            - heavy version with cast table
            - Conveyor belt feed with heavy pressure rollers
            - Calibration unit with steel roller
            - Fine grinding unit with fixed calibration sanding shoe
            - Working width 390mm
            - Workpiece thickness 4mm - 390mm
            1. Grinding unit (calibration)
            - heavy steel roller with 200mm diameter
            - stable roller bearing
            - pneumatically controlled sanding belt oscillation
            - Sanding belt dimensions 400x1800mm
            - Drive motor 7.5 kW
            - Chip removal depending on the belt grain size up to 2mm
            2. Grinding unit (fine grinding)
            - Calibration sanding shoe CERMET coated
            wear and maintenance free
            - pneumatically controlled sanding belt oscillation
            - Sanding belt dimensions 400x1800mm
            - Drive motor 7.5 kW
            - Electric motorized height adjustment of both grinding units
            with three-phase motor 0.37 kW including digital display
            - continuous workpiece feed using a geared motor and
            Frequency converter 4-20 m/min
            - Workpiece thickness scanning via contact roller
            - Inlet contact with EMERGENCY STOP interruption
            - Suction nozzle with connection diameter 2 x 150mm
            - Length x width x height (mm): 1400x1200x2200
            - Weight: 1000kg
            - Voltage 400 volts, 50Hz, 3P, air connection 6 bar
            dust tested, CE version
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------
            Special accessories with additional costs:

            Feed reversal including pneumatically guided conveyor belt
            and pneumatic excavation of the units during return

            Heavy roller conveyor HBS 500mm width, 2m long
            Ball bearing rollers diameter 60mm, steel tube
            galvanized with spring axle 12mm, load capacity per roller 80kg,
            Roll pitch 250mm, roll width 500mm, height adjustable
            Support feet per meter of length, track height 850mm +/- 60mm
            Roll cover according to HBG (required for machine with
            automatic feed)
            ---------------------------------
            Prices of the above-mentioned special accessories on request!
            ---------------------------------

            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine MB Roba Twin Flat  -Video-


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5343 · Sanding machine

          MB - Roba Twin Flat -Video- - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 100,150 mm︱Sanding height max. ,
            Number of sanding units 2 St.
            sanding width 100,150 mm
            Sanding height max. ,


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5580 · Sanding machine

          LÖWER - DSM 2000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 190 mm︱Sanding height max. 2-180 mm︱
          LÖWER double-sided grinding machine DSM 2000 --------------------------------- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version -------------------------------------------------- ---------------------- Basic price of the machine on request! -------------------------------------------------- ---------------------- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Price on request Sanding belt blowout - via nozzles directly on the radii of the tension rollers inside arranged in the suction system and can be switched on separately Price on request Lateral displacement of the entire machine - adjustable 50-100mm oscillating for more even Utilization of sanding belts, finishing tools and Transport system, geared motor 0.37kW (not available in conjunction with disc/softdisc unit) Price on request Transport freewheel device - when linked with little distance to the previous machine Price on request External start impulse of the machine - via a button including control option via external PLC control (when linked in a production line) Price on request DUPLO control - additional control panel for attachment to a upstream machine with the following functions: - Start button - Emergency stop switch - Height adjustment up, down and 1/10 down - Digital strength display - shielded special cable, (max. 20m) Price on request -------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 2 St.
            sanding width 190 mm
            Sanding height max. 2-180 mm
            Description :
            LÖWER double-sided grinding machine DSM 2000
            ---------------------------------
            Double-sided single wood sander for sanding
            Solid wood such as window wood etc. Stable top quality
            Guide with long casting tables, brushing and finishing equipment
            and conveyor belt feed. Suitable for high continuous loads
            even with higher chip removals.

            - Staggered sanding and finishing units at the top and bottom
            - Directly driven rubberized grinding rollers for slip-free power transmission
            - Combined grinding via roller and shoe for high chip removal at the same time
            flat intervention zone
            - Maintenance and wear-free CERMET-coated sanding shoes with very
            good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding and higher grinding
            Grinding belt service life
            - Forced pneumatically controlled sanding belt oscillation
            - effective sanding dust extraction directly on the sanding rollers
            Airborne dust extraction on the tension rollers
            - Integrated brushing and finishing device with large sanding dust extraction
            - Motorized grinding thickness adjustment via precision threaded spindles and
            large-sized linear ball
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom using a precision threaded
            spindle
            Dimension display via scale ring (resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinders with constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation in seconds
            - Adjustment of the sanding belt run when changing the belt
            - electro-pneumatic compressed air monitoring
            - Run-in protection via contact roller for workpieces that are too thick
            - Workpiece transport via calibrated non-slip and non-stick conveyor belts
            over heavy, 1000mm long cast tables with a finely planed surface and
            Spring-loaded pressure rollers with fine adjustment
            - Cardan shaft drive for smooth and even workpiece transport
            - Feed gear motor with three different feed speeds
            for quick adaptation to different types of wood
            - all motors electrically protected
            - Ergonomically arranged controls on the workpiece inlet side
            - automatic workpiece thickness scanning (no previous measurement necessary)
            - Digital thickness display (resolution 0.1mm) with modern magnetic tape system

            Technical data:
            - Sanding belt speed: 22 m/s
            - Sanding belt length: 1800mm
            - Sanding belt width: 200mm
            - Working width: 190mm
            - Grinding thickness: 2-180mm
            - two brake motors for drive: 5.5 kW
            - Feed motor: 1.0 kW
            - Feed speed: 6, 11 and 16 m/min.
            - automatic height adjustment: 0.37 kW
            - two brush units
            with fiber brushes D 120 x 200mm at 0.37 kW
            - Suction nozzle: 2 x 120mm and 2 x 150mm
            - Pneumatic connection 6 bar
            - Working height: 850mm
            - Length: 2105mm
            - Length with control panel 2490mm
            - Width: 880mm
            - Height: 1910mm
            - Weight: approx. 1500 kg
            - Operating voltage: 400 volts, 50 Hz, 3P
            - CE version
            -------------------------------------------------- ----------------------
            Basic price of the machine on request!
            -------------------------------------------------- ----------------------

            Special accessories with surcharge:

            continuous feed 4-20 m/min.
            for speed adjustment to the previous machine
            Price on request

            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled
            Price on request

            Sanding belt blowout
            - via nozzles directly on the radii of the tension rollers inside
            arranged in the suction system and can be switched on separately
            Price on request

            Lateral displacement of the entire machine
            - adjustable 50-100mm oscillating for more even
            Utilization of sanding belts, finishing tools and
            Transport system, geared motor 0.37kW
            (not available in conjunction with disc/softdisc unit)
            Price on request

            Transport freewheel device
            - when linked with little distance to the previous machine
            Price on request

            External start impulse of the machine
            - via a button including control option via external
            PLC control (when linked in a production line)
            Price on request

            DUPLO control
            - additional control panel for attachment to a
            upstream machine with the following functions:
            - Start button
            - Emergency stop switch
            - Height adjustment up, down and 1/10 down
            - Digital strength display
            - shielded special cable, (max. 20m)
            Price on request
            --------------------------------
            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2004


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5088 · Sanding machine

          LÖWER - DSM 2004 - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 190 mm︱Sanding height max. 180 mm︱
          LÖWER-DoubleSander Solid DSM 2004 ---------------------------------- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version --------------------------------- Price of the above machine on request! --------------------------------- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two grinding flap discs with a diameter of 200mm (max. grinding width 180mm) - Adjustable laterally and in delivery - including frequency converter for stepless speed control instead of the standard brushing and finishing facility Soft disc aggregate a soft disc each at the top and bottom for the intensive defibering cross-section with fine grain size - Discs with a diameter of 200mm - Manually adjustable laterally and in delivery - sensor-controlled automatic immersion - Continuous speed control via frequency converter - Boundary ruler min. workpiece thickness 20mm instead of the standard brushing and finishing facility Roller finish package - two grooved roller base bodies with grinding lamellas equipped - Total diameter approx. 180mm - including frequency converter for stepless Speed ??control instead of the standard brushing and finishing facility Lateral displacement of the entire machine - adjustable 50-100mm oscillating for more even Utilization of sanding belts, finishing tools and Transport system, geared motor 0.37kW (not available in conjunction with disc/softdisc unit) Transport freewheel device - when linked with little distance to the previous machine External start impulse of the machine via a button Control option via an external PLC control (at chaining in production line) DUPLO control - additional control panel for attachment to a upstream machine with the following functions: - Start button - Emergency stop switch - Height adjustment up, down and 1/10 down - Digital strength display - shielded special cable, (max. 20m) PLC Power Panel package for DSM instead of standard contactor control - B&R PLC touch panel for operation and display - Parameters that can be set using the touch panel are workpiece thickness, Grinding units on/off, feed on/off, Feed speed, belt blow-off on/off (if available), disc motor (if available) - Saving the parameters as machine programs - Ethernet interface (UDP protocol) - Manual/automatic operation selector switch Road connection, preparation for master computer control Automatic workpiece thickness scanning (no prior measurement necessary) Set of SmartFlex sanding flaps for DSM with sanding flap discs consisting of: 60 strips M 35 / 50 Set of SmartFlex sanding flaps for DSM with flap rollers consisting of: 48 strips M 55 / 200 Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ---------------------------------- Prices of the above-mentioned special accessories on request! ---------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 4 St.
            sanding width 190 mm
            Sanding height max. 180 mm
            Description :
            LÖWER-DoubleSander Solid DSM 2004
            ----------------------------------
            Double-sided four-belt single wood sander for
            Sanding solid wood such as window frames etc.
            Highly stable top design with innovative details. Suitable
            for high continuous loads even with higher chip removals.
            - sanding units arranged one after the other for pre-grinding,
            Fine sanding and finishing sanding, each from above and below
            1. Belt sanding unit with heavy steel roller
            2. Belt sanding unit with rubberized roller and shoe
            3. Finishing unit with fiber brush
            - Directly driven grinding rollers for slip-free
            Power transmission
            - maintenance and wear-free CERMET-coated grinding wheels
            shoes with very good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding
            and longer sanding belt service life
            - force-guided pneumatically controlled sanding belt
            oscillation
            - effective sanding dust extraction directly on the
            Grinding rollers
            - Airborne dust extraction on the tension rollers
            - Integrated brushing and finishing device with large
            Grinding dust extraction
            - motorized grinding thickness adjustment via precision
            threaded spindles and large-sized linear ball screws
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom via precision
            Threaded spindle with dimension display via scale ring
            (Resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinder
            constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation
            Within seconds
            - Adjustment option for the sanding belt run
            Band change
            - electro-pneumatic compressed air monitoring
            - Anti-running protection via contact roller if it is too thick
            workpieces
            - Workpiece transport via calibrated non-slip and non-stick
            fixed conveyor belts over heavy, cast tables
            Finely planed surface and spring-loaded pressure rollers
            with fine adjustment
            - Cardan shaft drive for smooth and consistent
            Workpiece transport
            - Feed gear motor with stepless speed
            4-20 m/min
            - all motors electrically protected
            - ergonomically arranged controls
            - digital thickness display (resolution 0.1mm) with modern
            Magnetic tape system
            Technical data:
            - Sanding belt speed 22 m/s
            - Sanding belt length 1800mm
            - Sanding belt width 200mm

            - Working width 190mm
            - Grinding thickness 2-180mm
            - four brake motors for 5.5 kW drive
            - Feed motor 1.5 kW
            - Feed speed 4-20 m/min.
            - automatic height adjustment 0.37 kW
            - two brush units
            with fiber brushes D 120 x 200mm at 0.37 kW
            - Suction nozzle 2 x 180mm
            2 x 120mm
            - Extraction air speed 20 m/s
            - Pneumatic connection 6 bar
            - Working height 870mm
            - Length (with soft disc 2740mm) 2600mm
            - Length with control panel (with soft disc 3035mm) 2985mm
            - Width 880mm
            - Height 1910mm
            - Weight approx. 3300 kg
            - Operating voltage 400 volts, 50 Hz, 3P
            - CE version
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------

            Special accessories with additional charge:

            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled

            4-belt sanding belt blowout
            via nozzles directly on the radii of the tension rollers inside
            the suction arranged, timer controlled on/off 5 seconds each,
            can be switched on separately

            Disc unit for defibering
            - two grinding flap discs with a diameter of 200mm
            (max. grinding width 180mm)
            - Adjustable laterally and in delivery
            - including frequency converter for stepless speed control
            instead of the standard brushing and finishing facility

            Soft disc aggregate
            a soft disc each at the top and bottom for the
            intensive defibering cross-section with fine grain size
            - Discs with a diameter of 200mm
            - Manually adjustable laterally and in delivery
            - sensor-controlled automatic immersion
            - Continuous speed control via frequency converter
            - Boundary ruler min. workpiece thickness 20mm
            instead of the standard brushing and finishing facility

            Roller finish package
            - two grooved roller base bodies with grinding lamellas
            equipped
            - Total diameter approx. 180mm
            - including frequency converter for stepless
            Speed ??control
            instead of the standard brushing and finishing facility

            Lateral displacement of the entire machine
            - adjustable 50-100mm oscillating for more even
            Utilization of sanding belts, finishing tools and
            Transport system, geared motor 0.37kW
            (not available in conjunction with disc/softdisc unit)

            Transport freewheel device
            - when linked with little distance to the previous machine

            External start impulse of the machine via a button
            Control option via an external PLC control (at
            chaining in production line)

            DUPLO control
            - additional control panel for attachment to a
            upstream machine with the following functions:
            - Start button
            - Emergency stop switch
            - Height adjustment up, down and 1/10 down
            - Digital strength display
            - shielded special cable, (max. 20m)

            PLC Power Panel package for DSM
            instead of standard contactor control
            - B&R PLC touch panel for operation and display
            - Parameters that can be set using the touch panel are workpiece thickness,
            Grinding units on/off, feed on/off,
            Feed speed, belt blow-off on/off (if
            available), disc motor (if available)
            - Saving the parameters as machine programs
            - Ethernet interface (UDP protocol)
            - Manual/automatic operation selector switch

            Road connection, preparation for master computer control

            Automatic workpiece thickness scanning
            (no prior measurement necessary)

            Set of SmartFlex sanding flaps for DSM with sanding flap discs
            consisting of:
            60 strips M 35 / 50

            Set of SmartFlex sanding flaps for DSM with flap rollers
            consisting of:
            48 strips M 55 / 200

            Sandpaper disc VB for soft disc
            D=200mm grit 280
            with velor backing (Velcro), pack of 100.
            ----------------------------------
            Prices of the above-mentioned special accessories on request!
            ----------------------------------

            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DoubleMaster DSM 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6199 · Sanding machine

          LÖWER - DoubleMaster DSM 2000 - - neu -

          Technical details
          Number of sanding units 4 St︱sanding width 190 mm︱Sanding height max. 2 - 180 mm︱
          LÖWER - DoubleMaster DSM 2000 DB ------------------------------------------------- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version -------------------------------- Price of the above machine on request! -------------------------------- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Soft disc unit instead of grinding flap disc unit top and bottom for more aggressive cross and fine sanding including sensor-controlled automatic immersion Automatic workpiece thickness scanning no prior measurement necessary) Set of SmartFlex sanding flaps for DSM with flap disc consisting of: 60 strips M 35 / 50 Set of SmartFlex sanding flaps for DSM with flap roller consisting of: 48 strips M 55 / 200 Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. Prices of the above-mentioned special accessories on request! -------------------------------- (technical data according to manufacturer - no guarantee!)
            Number of sanding units 4 St
            sanding width 190 mm
            Sanding height max. 2 - 180 mm
            Description :
            LÖWER - DoubleMaster DSM 2000 DB
            -------------------------------------------------
            Double-sided single wood sander with additional
            Transverse brush sanding unit (discs) and
            Longitudinal brush sanding unit (roller) for sanding
            Solid wood such as B. window wood etc.
            Stable top version with long cast tables and
            Conveyor belt feed. Suitable for high continuous loads
            even with higher chip removals.
            1. Belt sanding unit with CERMET sanding shoe pre-sanding
            2. Disc aggregate cross grinding for defibering
            3. Rolling aggregate longitudinal grinding for directional finish
            Direction of growth
            - Staggered sanding and finishing units at the top
            and below
            - directly driven rubberized sanding rollers for slip-proof
            free power transmission
            - Combined grinding via roller and shoe for high chip removal
            with a flat intervention zone at the same time
            - maintenance and wear-free CERMET-coated grinding wheels
            shoes with very good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding
            and longer sanding belt service life
            - force-guided pneumatically controlled sanding belt
            oscillation
            - effective sanding dust extraction directly on the
            Grinding rollers
            - Airborne dust extraction on the tension rollers
            - integrated brush grinding device (transverse and
            Longitudinal) with sanding dust extraction
            - motorized grinding thickness adjustment via precision
            threaded spindles and large-sized linear ball screws
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom via precision
            Threaded spindle with dimension display via scale ring
            (Resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinder
            constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation
            Within seconds
            - Adjustment option for the sanding belt run
            Band change
            - electro-pneumatic compressed air monitoring
            - Anti-running protection via contact roller if it is too thick
            workpieces
            - Workpiece transport via calibrated non-slip and non-stick
            fixed conveyor belts over heavy, 1000mm long cast iron
            tables with a finely planed surface and spring-loaded
            Pressure rollers with fine adjustment
            - Cardan shaft drive for smooth and consistent
            Workpiece transport
            - Feed gear motor infinitely variable
            for quick adaptation to different types of wood
            - all motors electrically protected
            - ergonomically arranged controls on the
            Workpiece inlet side
            - digital thickness display (resolution 0.1mm) with modern
            Magnetic tape system

            Technical data:
            - Sanding belt speed 22 m/s
            - Sanding belt length 1800mm
            - Sanding belt width 200mm
            - Working width 190mm
            - Grinding thickness 2-180mm
            - two brake motors for 5.5 kW drive
            - Feed motor 1.0 kW
            - Feed speed 4-20m/min.
            - automatic height adjustment 0.37 kW
            - Brush sanding units
            Disc D=max. 200mm
            Roller D=max. 270mm
            - Suction nozzles 2 x 120mm and 2 x 180mm
            - Pneumatic connection 6 bar
            - Working height 870mm

            External dimensions:
            - Length 2600mm
            - Length with wheels 2985mm
            - Width 880mm
            - Height 1910mm
            - Weight approx. 1500 kg
            - Operating voltage 400 volts, 50 Hz, 3P
            - CE version
            --------------------------------
            Price of the above machine on request!
            --------------------------------

            Special accessories with additional charge:
            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled

            Sanding belt blowout
            via nozzles directly on the radii of the tension rollers inside
            the suction arranged, timer controlled on/off 5 seconds each,
            can be switched on separately

            Soft disc unit instead of grinding flap disc unit
            top and bottom for more aggressive cross and fine sanding
            including sensor-controlled automatic immersion

            Automatic workpiece thickness scanning
            no prior measurement necessary)

            Set of SmartFlex sanding flaps for DSM with flap disc
            consisting of:
            60 strips M 35 / 50

            Set of SmartFlex sanding flaps for DSM with flap roller
            consisting of:
            48 strips M 55 / 200

            Sandpaper disc VB for soft disc
            D=200mm grit 280
            with velor backing (Velcro), pack of 100.

            Prices of the above-mentioned special accessories on request!
            --------------------------------

            (technical data according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer:

          LÖWER - HESS - QUICKWOOD - GÖCKEL - MB -