'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Assembling station

          Machinelist: Assembling station


          Assembling station

          used Window production: wood Assembling station RUCHSER Holzfenster-Fertigung Montage


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5721 · Assembling station

          RUCHSER - Holzfenster-Fertigung Montage - - neu -

          Technical details
          Dimensions (L,W) - ︱Weight - ︱tiltable yes/no -
            Dimensions (L,W) -
            Weight -
            tiltable yes/no -


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Assembling station RUCHSER RU-S1


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5916 · Assembling station

          RUCHSER - RU-S1 - - neu -

          Technical details
          Dimensions (L,W) 2000,3000,4000 mm︱Weight 100 kg︱tiltable yes/no nein nein︱
          Assembly glazing and sealing stand with lifting device ************************************************** ***************************** RU -S1 Stop - and assembly table standing, length 2000 mm, width 700 mm Plant height 1600 mm, lifting device with pneumatic 300-1000 mm, Space than roller conveyor , roll length 200 mm, roller pitch 200mm. Roller conveyor height adjustable 280-350 mm. Contact surface with Felt strips and a height-adjustable rubber roller bar at the bottom to Top . Conditioning grille to protect the edges , left and right respectively one Role as edge protection for elements up to 2500 mm height. Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm, 2 shelf boards, load capacity 300 kg. alternatively : ------------- RU -S2 Stop and assembly table standing . Same as RU -S1 However, length 3000 mm alternatively : ------------ RU- S3 Stop and assembly table standing design as RU -S1 However, length 4000 mm (technical details according to manufacturer - without guarantee ! ) Prices on request!
            Dimensions (L,W) 2000,3000,4000 mm
            Weight 100 kg
            tiltable yes/no nein nein
            Description :
            Assembly glazing and sealing stand with lifting device
            ************************************************** *****************************

            RU -S1
            Stop - and assembly table standing, length 2000 mm, width 700 mm

            Plant height 1600 mm, lifting device with pneumatic 300-1000 mm,

            Space than roller conveyor , roll length 200 mm, roller pitch 200mm.

            Roller conveyor height adjustable 280-350 mm. Contact surface with

            Felt strips and a height-adjustable rubber roller bar at the bottom to

            Top . Conditioning grille to protect the edges , left and right respectively one

            Role as edge protection for elements up to 2500 mm height.

            Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200
            mm,

            2 shelf boards, load capacity 300 kg.


            alternatively :
            -------------

            RU -S2
            Stop and assembly table standing . Same as RU -S1
            However, length 3000 mm

            alternatively :
            ------------

            RU- S3
            Stop and assembly table standing design as RU -S1
            However, length 4000 mm

            (technical details according to manufacturer - without guarantee ! )

            Prices on request!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Assembling station RUCHSER Holzfenster-Fertigung Montage


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5599 · Assembling station

          RUCHSER - Holzfenster-Fertigung Montage - - neu -

          Technical details
          Dimensions (L,W) - ︱Weight - ︱tiltable yes/no -
          In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided ************************************************** **** Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table ************************** manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers ************************************* (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right ********************************* 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes ************************************** Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture ****************************** AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting ***************** instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock *************************************** Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart *************************************** unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls ************************************************** to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels ************************************************** ***** to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart ********************************** with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table ************************************************** * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 450-900 mm, in the amount of 320-1600 mm. Telescopic rods for the vacuum suction to 80 mm extended with felt, for supporting of the profiles, roller conveyor with lifting device. When tilted from the horizontal to the vertical position lowers the roller conveyor automatically from the profile thickness. After the Releasing the vacuum suction moves the roller conveyor back to the basic position. PVC rolls, Roll length 100 mm, roller pitch 150 mm, Vacuum generation by Venturi silenced Item 8.0 - Item 10472002 RU-TFW-800/90 wing and door specialist cars ************************************************** ** 10 compartments, compartment distance 90 mm, with half Compartment separator, part of the plant covered with felt, erecting surface with PVC rollers Shelf depth 800 mm, compartment height 2450 mm, Height 2750 mm, width 1350 mm. Mobile on 4 plastic castors, Diameter 150 mm, 2 with brake facility. Brake means for holding the elements in the Transport. About an eccentric, the elements are raised on one side. Item 8.1 - Item 6559 guide rollers ************************** 1 pair Item 8.2 - Item 6340 1 guide rail 2500 mm long *************************************** Item 9.0 - Item 0.98 million RU-SW1-90 ° vertical work table ***************************************** for weather protection leg Fri 03:05:10 10 mm offset. Wooden windows with turning device for Glazing and double-sided sealing, Angle length 1500 mm, opening angle 90 ° max., Working width 2500 mm, Overall length 1700 mm, overall width 700 mm, height 1600 mm plant, plant- surface with felt the side of the plant part on the insertion side a role as Edge protection for elements up to 2500 mm Height, pneumatic lifting device von 300 - 1000 mm Item 10.0 - Article 10,799,001 RU-FLG 280/9 flood and painting hangers ********************************************** for the color treatment of the wing and Frame profiles, horizontal positioning or inclined approximately 30 °. 9 pairs of arbors 100 mm long, at an angle of 45 ° spacing the spikes in height 180 mm, distance in width 280 mm, hole spacing for the Holes on the frame profile 320 mm, Diameter 12 mm, height 2200 mm, as a function of the suspension hooks adapted to the existing monorail Total price of this placement: Place order! (technical details according to manufacturer - without guarantee!)
            Dimensions (L,W) -
            Weight -
            tiltable yes/no -
            Description :
            In addition to standing a PDF document, see the description of positions -
            Prices on request!


            RUCHSER standard offer with layout for
            a wooden window production with being milled
            Glass bar and screwed corner joints.

            Daily capacity approximately 15 Window

            Manufacturing consisting of:

            Item 1.0 - Item 107 850 000
            RU-PWD-H1600/130/4 profile carriage double-sided
            ************************************************** ****
            Length 1600 mm, width 850 mm, height 2140 mm
            for horizontal position round and transport of
            Profile sections.
            12 support arms each column welded to
            the column, 2 adjustable center column,
            clear spacing of the support arms 130 mm,
            Depth of the support arms on each side 400 mm,
            Support arms covered with felt, with 4 plastic
            swivel castors, diameter 150 mm, of which
            2 with stop means.

            Item 2.0 - Item 0150001
            RU-M rotation - tilting table
            **************************
            manually tiltable bearing surface 1300 x 1400 mm,
            with 4 plug extension 1000 mm long,
            including tool tray without weatherboard-
            ausspaarung.

            Item 2.1 - Item 5009-1
            2 trays with 2 drawers
            *************************************
            (for RU-4, RU-2/4)

            Item 2.2 - Item 5062-1
            Extract left and right
            *********************************
            500 mm and up to 7000 mm
            folded down with one support leg

            Item 2.2 - Item 5012-1
            Hinged extension tubes
            **************************************
            Length 700 mm (max. 3 pairs)

            Item 2.4 - Item 6125-2
            Corner mounting fixture
            ******************************
            AoE attacks rectangular pneumatic
            lowered with clamping unit for 2 profiles
            mounted on RU-M

            Item 2.5 - Item 2069-1
            tilting
            *****************
            instead of manually, pneumatically operated

            Item 3.0 - Article 10.782 million
            RU-EW-2S two-sided vehicles in stock
            ***************************************
            Storage capacity max. 36 piece sash
            L - shaped screw, length 1200 mm,
            Depth 800 mm, height 2200 mm, edition of Holme
            felted, 4 swivel castors, 2 with brakes

            Item 4.0 - Item 6600000
            RU-KWI-1000 Commission cart
            ***************************************
            unladen be nested,
            Length 1120 mm, width 1100 mm, working width
            850 mm, height 1900 mm,
            Plant height 1500 mm, bearing capacity 750 kg
            mobile on 4 plastic castors,
            Diameter 150 mm, 2 with
            Stop device, 2 drawers on the left and right
            each 350 mm in length, max. 1800 mm and
            Height max. 2100 mm

            Item 5.0 - Item 740-300
            RU-DH-F2 double reel cart for 2 rolls
            **************************************************
            to roll size 620 x 350 mm (without coil)
            to roll size 800 x 350 mm (with coil)
            with 4 swivel castors, 2 with stop device

            Item 5.0a alternative to Item 5.0 - Item 744-200
            RU-DH-F4, double coiler car for 4 wheels
            ************************************************** *****
            to roll size 620 x 350 mm (without coil)
            to roll size 800 x 350 mm (with coil)
            with 4 swivel castors, 2 with stop device

            Item 6.0 - Article 7.36 million
            RU-BW-1200-fog Cart
            **********************************
            with 16 divisions, length 1200 mm,
            Width 700 mm, height 1100 mm,
            with 2 shelves, mobile on 4
            Plastic castors with a
            Diameter of 125 mm,
            2 with stopper

            Item 7.0 - Article 10.0092 million
            RU-FMOG / K wing mounting rotary tilting table
            ************************************************** *
            for wings with attached bar and milled glass
            Bolt on corner joint.
            Rotary-tilting table with pneumatic tilting device
            and 6 piece sliding vacuum suction cups.
            Adjustment range in width from 450-900 mm,
            in the amount of 320-1600 mm.
            Telescopic rods for the vacuum suction to
            80 mm extended with felt, for supporting
            of the profiles, roller conveyor with lifting device.
            When tilted from the horizontal to the
            vertical position lowers the roller conveyor
            automatically from the profile thickness. After the
            Releasing the vacuum suction moves the roller conveyor
            back to the basic position. PVC rolls,
            Roll length 100 mm, roller pitch 150 mm,
            Vacuum generation by Venturi
            silenced

            Item 8.0 - Item 10472002
            RU-TFW-800/90 wing and door specialist cars
            ************************************************** **
            10 compartments, compartment distance 90 mm, with half
            Compartment separator, part of the plant covered with felt, erecting
            surface with PVC rollers
            Shelf depth 800 mm, compartment height 2450 mm,
            Height 2750 mm, width 1350 mm.
            Mobile on 4 plastic castors,
            Diameter 150 mm, 2 with brake facility.

            Brake means for holding the elements in the
            Transport. About an eccentric, the elements are
            raised on one side.

            Item 8.1 - Item 6559
            guide rollers
            **************************
            1 pair

            Item 8.2 - Item 6340
            1 guide rail 2500 mm long
            ***************************************

            Item 9.0 - Item 0.98 million
            RU-SW1-90 ° vertical work table
            *****************************************
            for weather protection leg Fri 03:05:10
            10 mm offset.
            Wooden windows with turning device for
            Glazing and double-sided sealing,
            Angle length 1500 mm, opening angle
            90 ° max., Working width 2500 mm,
            Overall length 1700 mm, overall width
            700 mm, height 1600 mm plant, plant-
            surface with felt the side of the plant part
            on the insertion side a role as
            Edge protection for elements up to 2500 mm
            Height, pneumatic lifting device
            von 300 - 1000 mm

            Item 10.0 - Article 10,799,001
            RU-FLG 280/9 flood and painting hangers
            **********************************************
            for the color treatment of the wing and
            Frame profiles, horizontal positioning
            or inclined approximately 30 °. 9 pairs of arbors
            100 mm long, at an angle of 45 ° spacing
            the spikes in height 180 mm, distance
            in width 280 mm, hole spacing for the
            Holes on the frame profile 320 mm,
            Diameter 12 mm, height 2200 mm,
            as a function of the suspension hooks
            adapted to the existing monorail

            Total price of this placement: Place order!

            (technical details according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Assembling station RUCHSER RU-MKS-1,4 Montage-Kipptisch


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2658 · Assembling station

          RUCHSER - RU-MKS-1,4 Montage-Kipptisch - - neu -

          Technical details
          Dimensions (L,W) 1400 x 1750 mm︱Weight , kg︱tiltable yes/no ja
          RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet --------------------------------------- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
            Dimensions (L,W) 1400 x 1750 mm
            Weight , kg
            tiltable yes/no ja
            Description :
            RUCHSER assembly tilting table RU-MKS 1,4
            ---------------------------------------

            Universally applicable work table e.g. for frame assembly, roller shutter box
            assembly, bars, sash fittings, glazing

            Equipment of machine, alternative / optional equipment on request!

            Pos. 1.0: Article no .: 8820000
            RU-MKS-1,4 assembly tilting table

            Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm
            Support surface with 3 support bars, 2 of which are adjustable,
            one permanently mounted on the upper extension,
            covered with felt. Support surface with width and
            Height / depth pull-out. Pneumatic tilting device,
            Payload 130 kg. Actuation via foot valve.
            Roller conveyor can be folded down manually and pulled out to the side
            from 1400-2500 mm, roll length 140 mm
            closed. Roller conveyor height in vertical
            Table position adjustable from 300-380 mm,
            Horizontal working height adjustable from 920-970 mm.
            ! For security reasons, at least one
            Flat clamping cylinders can also be ordered!

            Pos. 1.1: Article no .: 5582
            Pneumatic swivel device of the roller conveyor for MKS

            Pos. 1.2: Article no .: 21127
            Support beam 1400mm not extendable for RU-MKS

            Pos. 1.3: Article no .: 5585
            360 ° rotating device with pneumatic locking in 180 ° steps

            Rotary brake with double-sided actuation
            When using the rotating device, the minimum roller conveyor height of the
            increases
            MKS tables on 330mm

            Pos. 1.4: Article no .: 6455-01
            6 pieces of storage boxes with 2 compartments each,
            swivel mounted; for RU-MKS

            Pos. 1.5: Article no .: 5597-10
            Driving device for semicircular rails for RU-MKS-P4
            Actuation via foot valve, mounted on the roller conveyor side.

            Pos. 1.6: Article no .: 6354-6
            3 double meter semicircular runways 30 x 10 mm.

            Pos. 1.7: Article no .: 5193-1
            Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden
            attached to the support beam, with felt on the system part,
            Attachment left or right Please specify.

            Item 1.8: Article no .: 5584
            Lifting device 450 mm for working on the vertical element.

            Actuation via foot valve. Maximum payload
            200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2.

            Item 99.1 Packaging on a pallet

            ---------------------------------------

            Total price in this version: on request!

            See attached video and PDF brochure.

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Window production centre

          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2732 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - neuwertig - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 0︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 0
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            # 2732 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------
            Machine is in checking process at the moment!

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ------------------------------------------------
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Adjustment path radially pneumatically controlled to 8 positions,
            e.g. for edge rounding from above

            > Laser directional light to detect the saw section

            Pos. 2: Rounding unit horizontally at the bottom
            ------------------------------------------------
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Clamping length 25 mm
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Adjustment path axially mechanically coupled to crosscut saw
            > Adjustment path radially pneumatically controlled on/off

            Length stop CNC controlled
            ------------------------------------------------
            > Length 3500 mm
            > electronic length stop

            Pos. 3: Tap and slot spindle
            ------------------------------------------------
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, CNC
            > Spindle speed: 3500 rpm
            > Tool flight circle max. 320 mm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            Pos. 4: 1. Profiling spindle (synchronous and counter-rotation)
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            Pos. 5: 2nd profiling spindle
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, NC
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers axially pneumatically controlled opposite the spindle, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area of synchronous spindle),
            Rung support bar from above in the area of the profile milling unit vertically
            on the right
            and profiling spindle.


            Pos. 6: Profile milling unit horizontally at the top
            ------------------------------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed 9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment path 125 mm, 8 positions

            Pos. 7: 3rd profiling spindle (fittings spindle)
            ------------------------------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 110 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Pos. 8: Profile milling unit/grooving unit from below
            ------------------------------------------------
            > Motor power: 3.0 kW
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm, 8 positions
            > Radial adjustment range 100 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 200 mm

            Other features
            ------------------------------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed beam clamping
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Industrial PC, touchscreen with Windows PC control/NEXUS
            > with Weinig type production program

            Suction nozzle diameter:
            ------------------------------------------------
            Crosscut saw 80 mm
            Slotted spindle 140 mm
            Profile spindle 1 140 mm
            Profile spindle 2 140 mm
            Fitting spindle 120 mm
            Grooving device from above 80 mm
            Grooving device from below 80 mm

            Option:
            used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813)



            The technical characteristics of this machine should meet your expectations
            do not correspond, please contact us. Our
            A team with many years of experience will be happy to support you with any
            adjustments or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2711 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - CNC, Weinig PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱Control CNC, Weinig PC-Nexus
          Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            Control CNC, Weinig PC-Nexus
            Description :
            Weinig Uncontrol 12
            with radial and axial CNC spindles and VARIO table
            ..................................................
            The machine has already been professionally dismantled and stored in 73447
            Oberkochen

            Specifications summary
            (please inquire about any additional accessories included)
            ..................................................

            crosscut saw
            ..................................................
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 3000-6000 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser guide light for detecting the sawing section
            > Axial adjustment path 150 mm NC axis, electronically stepless
            > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from
            above

            rounding aggregate
            ..................................................
            > Position: horizontally below
            > Axial adjustment path together with the crosscut saw.


            electronic length stop
            ..................................................
            > Length 4500mm

            1. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            2. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            transfer tape
            ..................................................
            Included for transferring the parts to longitudinal processing
            Separation of double parts before entering longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotating)
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            2. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            3. Profile milling unit (grooving device from above)
            ..................................................
            > Position: horizontally above
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 30 mm NC axis, stepless
            > Radial adjustment range 125 mm NC axis, stepless
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm

            4. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm

            5. Profile milling unit (fitting spindle)
            ..................................................
            > Position: vertical right
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm


            6. Profile milling unit (grooving device from above), in the additional stand
            ..................................................
            > Position: working vertically to the right from above
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 100 mm, 8 positions using pneumatic turret
            > Radial adjustment path 80 mm 8 positions using pneumatic turret
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 180 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ..................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm

            Other features
            ..................................................

            > online capable
            > Folding device for tear-free folding
            > 2 axially clocked feed rollers opposite profile milling units, for production
            of narrow, short parts (e.g. glazing bars)
            > 3 axially clocked feed rollers (2) opposite the profiling spindle
            8 positions using pneumatic turret, for spindle 1,2,3
            > 3 table tops indexed to the tool diameter (2 positions), profile spindle
            No. 3 and fitting spindle
            > 3 rung support rails cycled vertically after the last profiling spindle
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left for wood widths of 40-140 mm
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Control: NEXUS PC control
            > VARIOplus package for tapping and slotting table, including length stop,
            CNC-controlled, 4,500 mm timber length, including studio window installation,
            Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet

            Option:
            > used window tools OERTLI IV 68, 78 wood and wood-aluminium

            Should the technical characteristics of this machine not meet your expectations
            correspond, please contact us. Our longtime
            experienced team will be happy to support you with any adjustments or with the
            Find a machine that suits your needs!

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6830 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            Weinig Unicontrol 6 with NC spindles
            -----------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            ...................................

            Generally
            -----------------------------------
            > Loading dimensions: 7000 x 2400 x 2400 mm
            > Machine weight, approx.: 3700 kg

            crosscut saw
            -----------------------------------
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Electronically safe length stop
            -----------------------------------
            > Length 3600 mm


            1. Tap and slot spindle
            ----------------------------------
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle (synchronous and counter-rotation)
            -----------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            -----------------------------------
            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW
            3. Profiling spindle (fittings spindle)
            -------------------------------------
            > Position: vertical right
            > Number of tools: 3 pieces.
            > Tool clamping length: 160 mm
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3 kW

            4. Grooving device clocked horizontally + vertically at the top
            -------------------------------------
            > Number of tools: 2 pieces.
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 130 mm
            > Motor power: 3 kW

            Other features
            -------------------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor system for 1-man operation
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows:
            > Control: PC control Nexus, CNC
            > Option:
            > Tools IV 68 Oertli
            > Tools IV 78 Leitz
            > Tools IV 92 Leitz

            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!
            -----------------------------------
            (technical information according to the manufacturer - no guarantee!)



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2725 · Window production centre

          WEINIG - Unicontrol 6 - - gebraucht - Südtron BT 20

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Südtron BT 20
          Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Südtron BT 20
            Description :
            Weinig Unicontrol 6
            ---------------------------------

            General data
            ---------------------------------

            Loading dimensions approx. 5000x2400x2400
            Machine weight approx. 3000 kg

            crosscut saw
            ---------------------------------

            > Pneumatic crosscut saw, against 8-fold turret stop
            > Spindle speed: 2800
            > Spindle diameter: 40 mm
            > Tool diameter max.: 350 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Length stop - clocked
            ---------------------------------
            > Length stop 2700 mm

            1. Tap and slot spindle
            ---------------------------------

            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle - synchronous spindle (synchronous and counter-rotation)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            ---------------------------------

            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            3. Profiling spindle (fittings spindle)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 3 pieces.
            > Spindle speed: 6000 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 180 mm
            > Motor power: 3 kW
            > Clamping length 150 mm
            > Horizontal: 2 positions
            > Vertical: 3 positions

            4. Glass bead saw pneumatically up and down
            ----------------------------------
            > Motor 3 kW

            Other features
            ----------------------------------

            > Folding device for tear-free folding
            > Double parts package
            > Screen control 99 programs Sütron BT20
            > Slanted window device
            > Electronic angle display for sloping windows
            > Return roller conveyor with push-off device
            > CE mark

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 9.500 €
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2654 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          #2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            #2654 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------------
            Machine is checked, ready for demonstration

            Specifications summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ----------------------------
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.0 kW
            > Laser guide light for detecting the sawing section

            electronic length stop, mounted on slotted table included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500mm

            Pos. 2: tapping and slotted spindle
            ----------------------------
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle axially pneumatically controlled, 2
            positions

            Rung guide consisting of:
            Guide ruler at the stop (synchronous spindle area),
            Rung support strip from above in the area of ??the profile milling unit,
            vertically on the right
            and profiling spindle.


            Pos. 5: Profile milling unit horizontally above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??5,850 rpm
            > Tool cutting circle max. 130 mm
            > Axial adjustment range 30 mm, 2 positions
            > Radial adjustment range 125 mm, 8 positions


            Item 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment path 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Industrial PC, PC control/NEXUS
            > Weinig type production program

            If the technical characteristics of this machine do not meet your expectations
            please contact us. Our experienced team will be happy to support you with any
            adjustments or looking for an alternative machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2728 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            Weinig Unicontrol 12
            with radial and axial CNC spindles as well as VARIO table and milling carriage
            ................................................
            Machine dismantled professionally and in our warehouse in 73447 Oberkochen.
            Video and pictures were taken before dismantling.

            Technical data summary
            (please inquire about any additional accessories included)
            ................................................

            crosscut saw
            ................................................
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser directional light to detect the saw section
            > Axial adjustment path 150 mm NC axis, electronically infinitely variable
            > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above

            Rounding aggregate
            ................................................
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Tool clamping length: 25 mm
            > Spindle speed: 9,000 rpm
            > Tool diameter: max. 130 mm
            > Axial adjustment path mechanically coupled with crosscut saw.
            > Radial adjustment pneumatically controlled on/off

            electronic length stop
            ................................................
            > Length 4500 mm

            1. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800 rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            2. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            Transfer tape
            ................................................
            Included for transferring the parts to longitudinal machining
            Separation of double parts before the start of longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotation)
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            2. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            3. Profile milling unit (grooving device from above)
            ................................................
            > Position: horizontal at the top
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 30 mm NC axis, infinitely variable
            > Radial adjustment path 125 mm NC axis, infinitely variable
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions

            4. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Rung support bar clocked vertically after the last profiling spindle

            5. Profile milling unit (fittings spindle)
            ................................................
            > Position: vertical right
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment path 115 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            6. Profile milling unit (grooving device from above), in the additional stand
            ................................................
            > Position: working vertically to the right from above
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 44 mm, 8 positions using a pneumatic turret
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 9,000 rpm
            > Tool flight circle max.: 130 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment path 100 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            Other features
            ................................................

            > online capable
            > Folding device for tear-free folding
            > Milling carriage for milling sashes with frame widths under 500 mm.
            Automatic pneumatic clamping
            > 9 feed rollers controlled up/down after the last profiling spindle
            faster and shorter milling process
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140
            mm
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Control: NEXUS PC control
            > Vario table with horizontal NC axis
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet
            > Machine without processing tools


            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!

            (Technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre Gubisch Centromat CW 1


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6784 · Window production centre

          Gubisch - Centromat CW 1 - - gebraucht -

          Technical details
          Tenoning spindle 1 Stk.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          1 for window and door production with 50 mm spindles in the longitudinal profiling. With the following processing stations and options: - One-sided slot machine for straight and sloping connections - Milling machine with glazing bead cutting unit for longitudinal profiling - Circumferential operation with synchronous milling unit and automatic immersion. - Swivel frame support up to 650 mm - Fitting grooving unit - Central control 1.0 crosscut saw automatically plunging in from above - Engine power, including engine brake 3.0 kW - Spindle speed 2800 rpm. - Flight circle diameter 350 mm - Spindle diameter 30 mm Æ - Clamping flange, 1 driver 6 mm Æ TC 42 mm 120 mm dia. - Pneumatic vertical stroke 100 mm - Pneumatic horizontal stroke 160 mm against 2 manual 6-fold turret stops - Chip extraction hood with extraction nozzle 100 mm Æ 2.0 slot unit - Engine power, including engine brake 9.2 kW - Spindle speed 3800 rpm. - flight circle diameter 320 mm max. - Spindle diameter 50 mm - Effective spindle length 300 mm - Pneumatic fixed vertical stroke 2 x 100 mm - suitable for 3 sets of tools - Zero height 10 mm - Chip extraction hood with extraction socket Æ 160 mm 3.0 slot table - Table height above floor 920 mm - Feed automatic, with 2 speeds - Slow 7m/min. - Fast 14 m/min. - Engine power including engine brake 0.21/0.30 kW - Drive can be disengaged for manual feed (oblique cuts) - Pneumatic workpiece clamping - Clamping cylinder 1 piece with 2 additional pressure shoes 3.1 Timber device - Counter wood changer with 2-fold automatic change and with man. rotation of 180 degrees, 2 further subtractions possible, which are then also in automatic mode counter. 3.2 Length stop - Stop system with 3 scales for a) outer frame b) Wings erect on the outside c) Outer wing transversely - Manual adjustment - Length 2300mm - pivotable +/- 60 degrees for inclined windows 3.3 Angle transfer - Automatically via vertically clocked feed roller in the milling feed 4.0 milling machine for longitudinal profiling and folding of windows/doors with the following Aggregates: 4.1 Down milling unit with plunge automatic - synchronization - Automatic immersion can be used for folding - Engine power including engine brake 7.5 kW - Spindle speed 6000 rpm. - flight circle diameter 240 mm max. - Side stops adjustable for zero Æ 140 mm max. of tools 112 mm min. - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 100 mm - Pneumatic horizontal stroke 80 mm - Chip extraction hood with extraction socket Æ 120 mm 4.2 Profiling unit - reverse - Engine power including engine brake 9.2 kW - Spindle speed 6000 rpm. - flight circle diameter 240 mm max. - Side stops adjustable for zero Æ 140 mm max. of tools 112 mm min. - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 300 mm - Vertical stroke pneumatically fixed 1 x 100 mm suitable for 3 sets of tools a 100 mm 2 x 100 mm - Chip extraction hood with extraction socket Æ 140 mm 4.3 Grooving unit - reverse - Engine power including engine brake 3.0 kW - Spindle speed 6,000 rpm. - flight circle diameter Profile depth 30 mm (hardware groove depth) 200 mm fixed - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 100 mm - Horizontal stroke 80 mm - Chip extraction with extraction socket Æ 120 mm 4.4 Glazing bead saw unit - reverse - Engine power including engine brake 3.0 kW - Spindle speed 3,000 rpm. - Spindle diameter 30 mm - Effective spindle length 15 mm - Radius of flight 200 mm - Clamping flange, 1 driver 6 mm Æ TC 42 mm 85 mm Æ - Pneumatic vertical stroke 100 mm - Pneumatically clocked glazing bead removal incl. anti-recoil device - Chip extraction hood with extraction socket Æ 80 mm 4.5 Advance - Motor power 0.75 kW - Feed speed 8 m/min. - Feed roller diameter 100 mm - Roller spacing in the area of ??the processing units 110 mm in the infeed area 200 mm - Feed rollers individually adjustable at an angle to the stop 4.6 Vertical right stops - Height 85mm - Stop 1 + 2 for 1 mm chip removal set - adjustable for zero diameter 112 - 140 mm 5.0 workpiece return device - The finished workpieces come over an inclined roller conveyor back to the serving staff. 6.0 central control - Clear central control panel with standard control and semi-automatic in the slot or profile milling unit (3 programs for window frame production IV). - Single and linked operation with automatic angle transfer function - with recirculation circuit including 4-step control - Grooving unit for edge gear cutters can be controlled at the push of a button - very simple, easy to understand, logically structured handling of the control 7.0 Technical connection data - Compressed air connection 3/8" 8 bar - Compressed air consumption approx. 40 NL/min. (prepared air according to Pneurop 6611) - Extraction air volume 135 m3/min. - Operating voltage 3 phases, 380 volts, 50 Hz. - Total connection value 36.16 kW - Extraction air speed 32 m/sec. - Electrical equipment according to VDE - Loading weight approx. 3500 kg * The machine is designed according to German regulations and standards. * Paint RAL 60 11 green * Tools IV 68/78 wood/aluminium - Technical information according to the manufacturer, without guarantee!
            Tenoning spindle 1 Stk.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            1 for window and door production
            with 50 mm spindles in the longitudinal profiling.

            With the following processing stations and options:

            - One-sided slot machine for straight and sloping connections
            - Milling machine with glazing bead cutting unit for longitudinal profiling
            - Circumferential operation with synchronous milling unit and automatic
            immersion.
            - Swivel frame support up to 650 mm
            - Fitting grooving unit
            - Central control

            1.0 crosscut saw automatically plunging in from above

            - Engine power, including engine brake 3.0 kW
            - Spindle speed 2800 rpm.
            - Flight circle diameter 350 mm
            - Spindle diameter 30 mm Æ
            - Clamping flange, 1 driver 6 mm Æ
            TC 42 mm 120 mm dia.
            - Pneumatic vertical stroke 100 mm
            - Pneumatic horizontal stroke 160 mm
            against 2 manual 6-fold turret stops
            - Chip extraction hood with extraction nozzle 100 mm Æ

            2.0 slot unit

            - Engine power, including engine brake 9.2 kW
            - Spindle speed 3800 rpm.
            - flight circle diameter 320 mm max.
            - Spindle diameter 50 mm
            - Effective spindle length 300 mm
            - Pneumatic fixed vertical stroke 2 x 100 mm
            - suitable for 3 sets of tools
            - Zero height 10 mm
            - Chip extraction hood with extraction socket Æ 160 mm

            3.0 slot table

            - Table height above floor 920 mm
            - Feed automatic, with 2 speeds
            - Slow 7m/min.
            - Fast 14 m/min.
            - Engine power including engine brake 0.21/0.30 kW
            - Drive can be disengaged for manual feed
            (oblique cuts)
            - Pneumatic workpiece clamping
            - Clamping cylinder 1 piece with 2 additional pressure shoes

            3.1 Timber device
            - Counter wood changer with 2-fold automatic change and with man. rotation of
            180 degrees, 2
            further subtractions possible, which are then also in automatic mode
            counter.

            3.2 Length stop
            - Stop system with 3 scales for a) outer frame
            b) Wings erect on the outside
            c) Outer wing transversely
            - Manual adjustment
            - Length 2300mm
            - pivotable +/- 60 degrees for inclined windows

            3.3 Angle transfer
            - Automatically via vertically clocked feed roller in the milling feed

            4.0 milling machine
            for longitudinal profiling and folding of windows/doors with the following
            Aggregates:

            4.1 Down milling unit with plunge automatic
            - synchronization
            - Automatic immersion can be used for folding
            - Engine power including engine brake 7.5 kW
            - Spindle speed 6000 rpm.
            - flight circle diameter 240 mm max.
            - Side stops adjustable for zero Æ 140 mm max.
            of tools 112 mm min.
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 100 mm
            - Pneumatic horizontal stroke 80 mm
            - Chip extraction hood with extraction socket Æ 120 mm

            4.2 Profiling unit

            - reverse
            - Engine power including engine brake 9.2 kW
            - Spindle speed 6000 rpm.
            - flight circle diameter 240 mm max.
            - Side stops adjustable for zero Æ 140 mm max.
            of tools 112 mm min.
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 300 mm
            - Vertical stroke pneumatically fixed 1 x 100 mm
            suitable for 3 sets of tools a 100 mm 2 x 100 mm
            - Chip extraction hood with extraction socket Æ 140 mm

            4.3 Grooving unit

            - reverse
            - Engine power including engine brake 3.0 kW
            - Spindle speed 6,000 rpm.
            - flight circle diameter
            Profile depth 30 mm (hardware groove depth) 200 mm fixed
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 100 mm
            - Horizontal stroke 80 mm
            - Chip extraction with extraction socket Æ 120 mm

            4.4 Glazing bead saw unit
            - reverse
            - Engine power including engine brake 3.0 kW
            - Spindle speed 3,000 rpm.
            - Spindle diameter 30 mm
            - Effective spindle length 15 mm
            - Radius of flight 200 mm
            - Clamping flange, 1 driver 6 mm Æ
            TC 42 mm 85 mm Æ
            - Pneumatic vertical stroke 100 mm
            - Pneumatically clocked glazing bead removal
            incl. anti-recoil device
            - Chip extraction hood with extraction socket Æ 80 mm

            4.5 Advance
            - Motor power 0.75 kW
            - Feed speed 8 m/min.
            - Feed roller diameter 100 mm
            - Roller spacing
            in the area of ??the processing units 110 mm
            in the infeed area 200 mm
            - Feed rollers individually adjustable at an angle to the stop

            4.6 Vertical right stops
            - Height 85mm
            - Stop 1 + 2 for 1 mm chip removal
            set
            - adjustable for zero diameter 112 - 140 mm

            5.0 workpiece return device
            - The finished workpieces come over an inclined roller conveyor
            back to the serving staff.

            6.0 central control

            - Clear central control panel with standard control and
            semi-automatic
            in the slot or profile milling unit
            (3 programs for window frame production IV).
            - Single and linked operation with automatic angle transfer function
            - with recirculation circuit including 4-step control
            - Grooving unit for edge gear cutters can be controlled at the push of a button
            - very simple, easy to understand, logically structured handling of the control

            7.0 Technical connection data
            - Compressed air connection 3/8" 8 bar
            - Compressed air consumption approx. 40 NL/min.
            (prepared air according to Pneurop 6611)
            - Extraction air volume 135 m3/min.
            - Operating voltage 3 phases, 380 volts, 50 Hz.
            - Total connection value 36.16 kW
            - Extraction air speed 32 m/sec.
            - Electrical equipment according to VDE
            - Loading weight approx. 3500 kg

            * The machine is designed according to German regulations and standards.

            * Paint RAL 60 11 green

            * Tools IV 68/78 wood/aluminium

            - Technical information according to the manufacturer, without guarantee!




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          RUCHSER -