'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Assembling station

          Machinelist: Assembling station


          Assembling station

          used Window production: wood Assembling station RUCHSER Holzfenster-Fertigung Montage


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5721 · Assembling station

          RUCHSER - Holzfenster-Fertigung Montage - - neu -

          Technical details
          Dimensions (L,W) - ︱Weight - ︱tiltable yes/no -
            Dimensions (L,W) -
            Weight -
            tiltable yes/no -


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Assembling station RUCHSER RU-S1


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5916 · Assembling station

          RUCHSER - RU-S1 - - neu -

          Technical details
          Dimensions (L,W) 2000,3000,4000 mm︱Weight 100 kg︱tiltable yes/no nein nein︱
          Assembly glazing and sealing stand with lifting device ************************************************** ***************************** RU -S1 Stop - and assembly table standing, length 2000 mm, width 700 mm Plant height 1600 mm, lifting device with pneumatic 300-1000 mm, Space than roller conveyor , roll length 200 mm, roller pitch 200mm. Roller conveyor height adjustable 280-350 mm. Contact surface with Felt strips and a height-adjustable rubber roller bar at the bottom to Top . Conditioning grille to protect the edges , left and right respectively one Role as edge protection for elements up to 2500 mm height. Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm, 2 shelf boards, load capacity 300 kg. alternatively : ------------- RU -S2 Stop and assembly table standing . Same as RU -S1 However, length 3000 mm alternatively : ------------ RU- S3 Stop and assembly table standing design as RU -S1 However, length 4000 mm (technical details according to manufacturer - without guarantee ! ) Prices on request!
            Dimensions (L,W) 2000,3000,4000 mm
            Weight 100 kg
            tiltable yes/no nein nein
            Description :
            Assembly glazing and sealing stand with lifting device
            ************************************************** *****************************

            RU -S1
            Stop - and assembly table standing, length 2000 mm, width 700 mm

            Plant height 1600 mm, lifting device with pneumatic 300-1000 mm,

            Space than roller conveyor , roll length 200 mm, roller pitch 200mm.

            Roller conveyor height adjustable 280-350 mm. Contact surface with

            Felt strips and a height-adjustable rubber roller bar at the bottom to

            Top . Conditioning grille to protect the edges , left and right respectively one

            Role as edge protection for elements up to 2500 mm height.

            Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200
            mm,

            2 shelf boards, load capacity 300 kg.


            alternatively :
            -------------

            RU -S2
            Stop and assembly table standing . Same as RU -S1
            However, length 3000 mm

            alternatively :
            ------------

            RU- S3
            Stop and assembly table standing design as RU -S1
            However, length 4000 mm

            (technical details according to manufacturer - without guarantee ! )

            Prices on request!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Assembling station RUCHSER RU-MKS-1,4 Montage-Kipptisch


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2658 · Assembling station

          RUCHSER - RU-MKS-1,4 Montage-Kipptisch - - neu -

          Technical details
          Dimensions (L,W) 1400 x 1750 mm︱Weight , kg︱tiltable yes/no ja
          RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet --------------------------------------- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
            Dimensions (L,W) 1400 x 1750 mm
            Weight , kg
            tiltable yes/no ja
            Description :
            RUCHSER assembly tilting table RU-MKS 1,4
            ---------------------------------------

            Universally applicable work table e.g. for frame assembly, roller shutter box
            assembly, bars, sash fittings, glazing

            Equipment of machine, alternative / optional equipment on request!

            Pos. 1.0: Article no .: 8820000
            RU-MKS-1,4 assembly tilting table

            Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm
            Support surface with 3 support bars, 2 of which are adjustable,
            one permanently mounted on the upper extension,
            covered with felt. Support surface with width and
            Height / depth pull-out. Pneumatic tilting device,
            Payload 130 kg. Actuation via foot valve.
            Roller conveyor can be folded down manually and pulled out to the side
            from 1400-2500 mm, roll length 140 mm
            closed. Roller conveyor height in vertical
            Table position adjustable from 300-380 mm,
            Horizontal working height adjustable from 920-970 mm.
            ! For security reasons, at least one
            Flat clamping cylinders can also be ordered!

            Pos. 1.1: Article no .: 5582
            Pneumatic swivel device of the roller conveyor for MKS

            Pos. 1.2: Article no .: 21127
            Support beam 1400mm not extendable for RU-MKS

            Pos. 1.3: Article no .: 5585
            360 ° rotating device with pneumatic locking in 180 ° steps

            Rotary brake with double-sided actuation
            When using the rotating device, the minimum roller conveyor height of the
            increases
            MKS tables on 330mm

            Pos. 1.4: Article no .: 6455-01
            6 pieces of storage boxes with 2 compartments each,
            swivel mounted; for RU-MKS

            Pos. 1.5: Article no .: 5597-10
            Driving device for semicircular rails for RU-MKS-P4
            Actuation via foot valve, mounted on the roller conveyor side.

            Pos. 1.6: Article no .: 6354-6
            3 double meter semicircular runways 30 x 10 mm.

            Pos. 1.7: Article no .: 5193-1
            Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden
            attached to the support beam, with felt on the system part,
            Attachment left or right Please specify.

            Item 1.8: Article no .: 5584
            Lifting device 450 mm for working on the vertical element.

            Actuation via foot valve. Maximum payload
            200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2.

            Item 99.1 Packaging on a pallet

            ---------------------------------------

            Total price in this version: on request!

            See attached video and PDF brochure.

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Assembling station RUCHSER Holzfenster-Fertigung Montage


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5599 · Assembling station

          RUCHSER - Holzfenster-Fertigung Montage - - neu -

          Technical details
          Dimensions (L,W) - ︱Weight - ︱tiltable yes/no -
          In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided ************************************************** **** Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table ************************** manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers ************************************* (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right ********************************* 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes ************************************** Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture ****************************** AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting ***************** instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock *************************************** Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart *************************************** unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls ************************************************** to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels ************************************************** ***** to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart ********************************** with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table ************************************************** * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 450-900 mm, in the amount of 320-1600 mm. Telescopic rods for the vacuum suction to 80 mm extended with felt, for supporting of the profiles, roller conveyor with lifting device. When tilted from the horizontal to the vertical position lowers the roller conveyor automatically from the profile thickness. After the Releasing the vacuum suction moves the roller conveyor back to the basic position. PVC rolls, Roll length 100 mm, roller pitch 150 mm, Vacuum generation by Venturi silenced Item 8.0 - Item 10472002 RU-TFW-800/90 wing and door specialist cars ************************************************** ** 10 compartments, compartment distance 90 mm, with half Compartment separator, part of the plant covered with felt, erecting surface with PVC rollers Shelf depth 800 mm, compartment height 2450 mm, Height 2750 mm, width 1350 mm. Mobile on 4 plastic castors, Diameter 150 mm, 2 with brake facility. Brake means for holding the elements in the Transport. About an eccentric, the elements are raised on one side. Item 8.1 - Item 6559 guide rollers ************************** 1 pair Item 8.2 - Item 6340 1 guide rail 2500 mm long *************************************** Item 9.0 - Item 0.98 million RU-SW1-90 ° vertical work table ***************************************** for weather protection leg Fri 03:05:10 10 mm offset. Wooden windows with turning device for Glazing and double-sided sealing, Angle length 1500 mm, opening angle 90 ° max., Working width 2500 mm, Overall length 1700 mm, overall width 700 mm, height 1600 mm plant, plant- surface with felt the side of the plant part on the insertion side a role as Edge protection for elements up to 2500 mm Height, pneumatic lifting device von 300 - 1000 mm Item 10.0 - Article 10,799,001 RU-FLG 280/9 flood and painting hangers ********************************************** for the color treatment of the wing and Frame profiles, horizontal positioning or inclined approximately 30 °. 9 pairs of arbors 100 mm long, at an angle of 45 ° spacing the spikes in height 180 mm, distance in width 280 mm, hole spacing for the Holes on the frame profile 320 mm, Diameter 12 mm, height 2200 mm, as a function of the suspension hooks adapted to the existing monorail Total price of this placement: Place order! (technical details according to manufacturer - without guarantee!)
            Dimensions (L,W) -
            Weight -
            tiltable yes/no -
            Description :
            In addition to standing a PDF document, see the description of positions -
            Prices on request!


            RUCHSER standard offer with layout for
            a wooden window production with being milled
            Glass bar and screwed corner joints.

            Daily capacity approximately 15 Window

            Manufacturing consisting of:

            Item 1.0 - Item 107 850 000
            RU-PWD-H1600/130/4 profile carriage double-sided
            ************************************************** ****
            Length 1600 mm, width 850 mm, height 2140 mm
            for horizontal position round and transport of
            Profile sections.
            12 support arms each column welded to
            the column, 2 adjustable center column,
            clear spacing of the support arms 130 mm,
            Depth of the support arms on each side 400 mm,
            Support arms covered with felt, with 4 plastic
            swivel castors, diameter 150 mm, of which
            2 with stop means.

            Item 2.0 - Item 0150001
            RU-M rotation - tilting table
            **************************
            manually tiltable bearing surface 1300 x 1400 mm,
            with 4 plug extension 1000 mm long,
            including tool tray without weatherboard-
            ausspaarung.

            Item 2.1 - Item 5009-1
            2 trays with 2 drawers
            *************************************
            (for RU-4, RU-2/4)

            Item 2.2 - Item 5062-1
            Extract left and right
            *********************************
            500 mm and up to 7000 mm
            folded down with one support leg

            Item 2.2 - Item 5012-1
            Hinged extension tubes
            **************************************
            Length 700 mm (max. 3 pairs)

            Item 2.4 - Item 6125-2
            Corner mounting fixture
            ******************************
            AoE attacks rectangular pneumatic
            lowered with clamping unit for 2 profiles
            mounted on RU-M

            Item 2.5 - Item 2069-1
            tilting
            *****************
            instead of manually, pneumatically operated

            Item 3.0 - Article 10.782 million
            RU-EW-2S two-sided vehicles in stock
            ***************************************
            Storage capacity max. 36 piece sash
            L - shaped screw, length 1200 mm,
            Depth 800 mm, height 2200 mm, edition of Holme
            felted, 4 swivel castors, 2 with brakes

            Item 4.0 - Item 6600000
            RU-KWI-1000 Commission cart
            ***************************************
            unladen be nested,
            Length 1120 mm, width 1100 mm, working width
            850 mm, height 1900 mm,
            Plant height 1500 mm, bearing capacity 750 kg
            mobile on 4 plastic castors,
            Diameter 150 mm, 2 with
            Stop device, 2 drawers on the left and right
            each 350 mm in length, max. 1800 mm and
            Height max. 2100 mm

            Item 5.0 - Item 740-300
            RU-DH-F2 double reel cart for 2 rolls
            **************************************************
            to roll size 620 x 350 mm (without coil)
            to roll size 800 x 350 mm (with coil)
            with 4 swivel castors, 2 with stop device

            Item 5.0a alternative to Item 5.0 - Item 744-200
            RU-DH-F4, double coiler car for 4 wheels
            ************************************************** *****
            to roll size 620 x 350 mm (without coil)
            to roll size 800 x 350 mm (with coil)
            with 4 swivel castors, 2 with stop device

            Item 6.0 - Article 7.36 million
            RU-BW-1200-fog Cart
            **********************************
            with 16 divisions, length 1200 mm,
            Width 700 mm, height 1100 mm,
            with 2 shelves, mobile on 4
            Plastic castors with a
            Diameter of 125 mm,
            2 with stopper

            Item 7.0 - Article 10.0092 million
            RU-FMOG / K wing mounting rotary tilting table
            ************************************************** *
            for wings with attached bar and milled glass
            Bolt on corner joint.
            Rotary-tilting table with pneumatic tilting device
            and 6 piece sliding vacuum suction cups.
            Adjustment range in width from 450-900 mm,
            in the amount of 320-1600 mm.
            Telescopic rods for the vacuum suction to
            80 mm extended with felt, for supporting
            of the profiles, roller conveyor with lifting device.
            When tilted from the horizontal to the
            vertical position lowers the roller conveyor
            automatically from the profile thickness. After the
            Releasing the vacuum suction moves the roller conveyor
            back to the basic position. PVC rolls,
            Roll length 100 mm, roller pitch 150 mm,
            Vacuum generation by Venturi
            silenced

            Item 8.0 - Item 10472002
            RU-TFW-800/90 wing and door specialist cars
            ************************************************** **
            10 compartments, compartment distance 90 mm, with half
            Compartment separator, part of the plant covered with felt, erecting
            surface with PVC rollers
            Shelf depth 800 mm, compartment height 2450 mm,
            Height 2750 mm, width 1350 mm.
            Mobile on 4 plastic castors,
            Diameter 150 mm, 2 with brake facility.

            Brake means for holding the elements in the
            Transport. About an eccentric, the elements are
            raised on one side.

            Item 8.1 - Item 6559
            guide rollers
            **************************
            1 pair

            Item 8.2 - Item 6340
            1 guide rail 2500 mm long
            ***************************************

            Item 9.0 - Item 0.98 million
            RU-SW1-90 ° vertical work table
            *****************************************
            for weather protection leg Fri 03:05:10
            10 mm offset.
            Wooden windows with turning device for
            Glazing and double-sided sealing,
            Angle length 1500 mm, opening angle
            90 ° max., Working width 2500 mm,
            Overall length 1700 mm, overall width
            700 mm, height 1600 mm plant, plant-
            surface with felt the side of the plant part
            on the insertion side a role as
            Edge protection for elements up to 2500 mm
            Height, pneumatic lifting device
            von 300 - 1000 mm

            Item 10.0 - Article 10,799,001
            RU-FLG 280/9 flood and painting hangers
            **********************************************
            for the color treatment of the wing and
            Frame profiles, horizontal positioning
            or inclined approximately 30 °. 9 pairs of arbors
            100 mm long, at an angle of 45 ° spacing
            the spikes in height 180 mm, distance
            in width 280 mm, hole spacing for the
            Holes on the frame profile 320 mm,
            Diameter 12 mm, height 2200 mm,
            as a function of the suspension hooks
            adapted to the existing monorail

            Total price of this placement: Place order!

            (technical details according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Frame press

          used Window production: wood Frame press S&S Bavaria 2000 L - Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6794 · Frame press

          S&S - Bavaria 2000 L - Video - - Vorführpresse -

          Technical details
          Working width 4500 mm︱Working height 3000 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5600x1350x3550 mm︱Weight 3000 kg︱
          S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ------------------------ Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: - lower insertion height for sashes with width <550 mm; approx. 1280 mm - Insertion height upper edge of upper horizontal frame wood up to pressing height 2,750mm; approx. 1,620 mm - Insertion height upper edge of upper horizontal frame wood pressing height >2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm Item 00001147 ------------------------ 1 medium pressure bar complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 00000112 ----------------------- infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for transverse pressure device Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 000000391 --------------------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Shut-off valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plates attachable for pressing up to 60 degrees Item 00000631 ----------------------- double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for small dimension pressing for bridging the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and additional pressing cycle for pressing "dowel connection" or "Plugtec", changeable via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000632 ----------------------- Electronic pressure preselection device For 4 different, permanently programmed pressure levels (can be changed at any time), and an additional freely selectable one Pressure level directly on the control panel Item 00001002 ----------------------- 6x printing unit support and printing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and abutments covered with plastic --------------------------------- Total price in the above version: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price per piece: 260.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4500 mm
            Working height 3000 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5600x1350x3550 mm
            Weight 3000 kg
            Description :
            S&S frame press Bavaria 2000 L
            ---------------------------------

            With automatic pressing cycle + manual control
            for corner connections tenon + slots and dowel connection / mortised tenon,
            can be changed using a selector switch on the control cabinet.
            With basic equipment for the optional use of counter profiles if the sash is on
            loose part to be folded over.

            CE version
            Basic machine in the strongest welded frame,
            with thick-walled special hollow profiles.
            Guideways of the pressure bars for the press corners
            in a low-abrasion finish.

            Fast, smooth, manual width adjustment
            by ball-bearing carriage, fixation in 50 mm
            Hole grid, optional motorized width adjustment with
            with hydraulic clamping (surcharge).

            Height adjustment and pressing by long-stroke cylinder
            in one work cycle. Right-hand press corners with
            integrated horizontal cylinders, therefore none
            vertical positioning of the horizontal printing cylinders
            necessary, avoiding cylinder collisions.
            Abutments below in several positions on each
            most favorable insertion height adjustable.

            3 KW compact hydraulic system with integrated
            Control block, variable pressure control
            from 20 - 120 bar, manometer

            Control via push button with separate control circuits
            for the vertical and horizontal press cylinders
            on a freely movable control panel.

            2 vertical press cylinders, double-acting, stroke on
            Adjusted working height, piston diameter 60 mm
            Pressure force per cylinder max. 2100 kg
            2 horizontal press cylinders, double-acting,
            80 mm stroke, piston diameter 40 mm
            Pressure force per cylinder max. 1250 kg
            Abutment and pressure plate depth 100 mm

            Control cabinet on the machine base on the left, 400 volts, 50 Hz
            Machine with ready-to-connect plug 16 A

            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: length x height = 4,500 mm x 2,750 mm
            A notice:
            actual working size: 4,500 x 3,000 mm (length x height=
            Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height)

            Item 0000127
            ------------------------
            Press height modification 2750/3000 mm a
            The machine is supplied with a 3,000 mm high pressure bar
            The cylinder attachment and the positions of the lower press corners
            however, correspond to the version with a press height of 2,750 mm.
            By installing 3 pieces of 300 mm long piston rod extensions
            the max. pressing height can be increased to 3,000 mm.
            Using the tools provided, it is possible to convert the
            Machine possible within approx. 10 minutes.

            Insertion heights:
            - lower insertion height for sashes with width <550 mm; approx. 1280 mm
            - Insertion height upper edge of upper horizontal frame wood up to pressing
            height
            2,750mm; approx. 1,620 mm
            - Insertion height upper edge of upper horizontal frame wood pressing height
            >2,750mm; approx. 1,920 mm (piston rod extension installed)

            Scope of delivery:
            1 piece support plate
            3 piston rod extensions 300 mm
            1 open-end wrench size 30
            1 ratchet with socket wrench size. 24
            1 piece holder for piston rod extensions and tool

            Hints:
            - The height is corrected for machines with a positioning function
            by parameter switching. Operation of the machine with the
            built-in piston rod extensions is replaced by another
            wallpaper displayed.

            - Total height of the machine approx. 3,400 mm

            Item 00001147
            ------------------------
            1 medium pressure bar complete with pressure cylinder,
            Pressure hose and shut-off valve up to 3,000 mm high

            Item 00000471
            ------------------------
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 00000112
            -----------------------
            infinitely height-adjustable transverse pressure device,
            complete with pressure cylinder and abutment,
            Throttle and shut-off valve

            Item 00000481
            ------------------------
            Individual pressure control for transverse pressure device
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 000000391
            ---------------------------------------
            Shut-off valve on the 3rd vertical cylinder

            Item 00000391
            -----------------------
            Shut-off valve on the upper horizontal cylinder


            Item 00001005
            ------------------------
            3 x inclined window controls for vertical cylinders

            Item 00000302
            -----------------------
            3x pendulum pressure plates attachable
            for pressing up to 60 degrees

            Item 00000631
            -----------------------
            double pendulum pressure plate
            for pointed windows (triangle)

            Item 00000113
            -----------------------
            2 x extension for pendulum pressure plate
            for pointed windows (triangle)

            Item 00000057
            -----------------------
            Intermediate allowance for small dimension pressing
            for bridging the 1st pressure bar,
            including shut-off valve on the 1st vertical cylinder

            Item 00000100
            -----------------------
            Motorized width adjustment with digital display

            Item 00001001
            -----------------------
            Machine equipped for pressing
            of "tenons + slots" and additional pressing cycle
            for pressing "dowel connection" or
            "Plugtec", changeable via selector switch on the control cabinet

            Item 00001003
            -----------------------
            Basic equipment for counter profiles

            Item 00000632
            -----------------------
            Electronic pressure preselection device
            For 4 different, permanently programmed pressure levels
            (can be changed at any time), and an additional freely selectable one
            Pressure level directly on the control panel

            Item 00001002
            -----------------------
            6x printing unit support and printing plate depth 120 mm

            Item 00099000
            -----------------------
            all pressure plates and abutments covered with plastic

            ---------------------------------
            Total price in the above version: on request!


            Options with additional prices:
            -----------------------

            Item 00001004
            -----------------------
            Counter profiles, price per piece: 260.00 euros

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6792 · Frame press

          S&S - RP 2000 - - Vorführmaschine -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5300 x 1250 x 3330 mm︱
          S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: -------------------------------------- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 00000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) -------------------------------------- Total price in the above version ex works: On request! -------------------------------------- Options: Article 00000042 1.00 pc Machine that can be dismantled i.e. H. Pressure bar on pallet -------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5300 x 1250 x 3330 mm
            Description :
            S&S frame press type RP 2000,
            -----------------------------
            C E - version
            Stable frame welded construction made of thick-walled special hollow profiles,
            Sliding carriage and pressure bar with 50 mm hole pattern.
            Continuous abutment on the left for width compression, lower abutment
            in two levels.
            Vertical press cylinder on special pressure bar with one-hand quick adjustment
            with weight compensation in the 50 mm hole pattern, height-adjustable, long
            Sliding carriages ensure the
            permanent absorption of high pressing forces.
            Fast, smooth width adjustment with ball-bearing carriage
            Central locking, fixation in 50 mm hole pattern.
            Upper horizontal press cylinder infinitely adjustable in height and with
            Equipped with counterbalance.
            Lower horizontal press cylinder with center holes for the two
            Abutment levels, with weight compensation.
            Abutment and pressure plate depth 100 mm
            Printing plate and support width 130 mm
            Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d =
            50 mm, stroke 120 mm double-acting, with counterweight and
            One-hand quick adjustment, 2 pieces
            Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with
            weight balancing; 2 manual control valves,
            Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400
            to 2400 kg
            pressure
            vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage.
            Complete with electrical connection.
            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: 4000mm x 2600mm (length x height)
            Required space: 5300 x 1250 x 3330 mm (L x W x H)

            Machine including the following options:
            --------------------------------------

            Article 00000374 1.00 pc
            Medium pressure bar with pressure cylinder
            double-acting, weight compensation,
            pressure hose and shut-off valve
            up to 2600 mm high

            Article 00000047 1.00 pc
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000038 1.00 pc
            Cross printing device complete with pressure cylinder
            double-acting, weight compensation, pressure hose
            and shut-off valve
            There is no weight compensation on the lower horizontal cylinder

            Article 00000048 1.00 pc
            Individual pressure control for transverse pressure device,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000039 1.00 pc
            Shut-off valve on the 3rd vertical cylinder

            Article 00000039 1.00 pc
            Shut-off valve on the upper horizontal cylinder

            Article 00000050 1.00 pc
            Width allowance for compression
            of small frames to bridge the
            1st pressure beam, including shut-off valve on the 1st vertical cylinder

            Article 00003117 1.00 pc
            Basic equipment for counter profiles
            The space required in height increases by 100 mm

            Item 00099000
            All pressure plates and abutments
            covered with plastic

            Article 00000049 1.00 pc
            Triangle studio window pressing device
            consisting of: locking device of
            Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates

            Article 00000063 1.00 pc
            double pendulum pressure plate
            for pointed windows (triangle)

            --------------------------------------

            Total price in the above version ex works: On request!

            --------------------------------------
            Options:
            Article 00000042 1.00 pc
            Machine that can be dismantled
            i.e. H. Pressure bar on pallet
            --------------------------------------

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Multipress Lochplattenpresse


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5956 · Frame press

          S&S - Multipress Lochplattenpresse - - neu -

          Technical details
          Working width 3500 mm︱Working height 2650 mm︱Number of cylinders nach Wahl St.︱
            Working width 3500 mm
            Working height 2650 mm
            Number of cylinders nach Wahl St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5845 · Frame press

          S&S - RP 2000 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S T 35


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6030 · Frame press

          S&S - T 35 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
          Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
            Description :
            Stable frame welded construction of thick-walled
            Special hollow profiles , sliding table and pressure beam with
            50 mm hole pattern .

            On the left side continuous abutment for grouting the wide ,
            lower abutment in 2 levels.

            Vertical pressing cylinder on specialty bar with one-
            quick adjustment with weight compensation in the 50 mm hole pattern
            adjustable in height. Long sliding table ensure the
            continuous recording of high jacking forces .

            Fast, smooth width adjustment with ball bearing
            Carriage with central fixation in 50 mm hole pattern.

            Upper horizontal press cylinder infinitely adjustable in height and
            equipped with counterbalance .

            Lower horizontal pressing cylinders with bore for
            two abutments levels without weight compensation .

            Abutment and pressure plate depth 100 mm

            Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
            d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
            One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
            stroke,
            120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
            Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
            4200 kg compression force vertically. With 3 kW three-phase motor for 400
            volts , 50 Hz
            Operating voltage.

            Complete with electrical connection .

            Painting RAL 7035 anthracite gray with light gray RAL 7016 .

            (technical details according to manufacturer - without guarantee ! )

            The detailed technical description can be found in the attached pdf file


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Super-Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6121 · Frame press

          S&S - Super-Video - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria 2000 L  -Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6496 · Frame press

          S&S - Bavaria 2000 L -Video - - neu -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 5 St.︱weight 2000 kg︱Dimensions (L/W/H) 5550x1300x3000 mm︱
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 5 St.
            weight 2000 kg
            Dimensions (L/W/H) 5550x1300x3000 mm
            Description :



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press SCHAFBERGER + SPROEDHUBER RP 1200


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6803 · Frame press

          SCHAFBERGER + SPROEDHUBER - RP 1200 - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱
          S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            Description :
            S+S hydraulic frame press RP 1200
            -------------------------------------
            Working width 3,550 mm
            Working height 2,250 mm
            -------------------------------------
            with medium pressure beam
            -------------------------------------
            still in use
            -------------------------------------

            Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2719 · Frame press

          HESS - Speedy Video - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱loading dimensions L x W x H 4500 x 900 x 2600 mm︱
          Hess Speedy frame press -------------------------------------- Press will be checekd Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            loading dimensions L x W x H 4500 x 900 x 2600 mm
            Description :
            Hess Speedy frame press
            --------------------------------------
            Press will be checekd

            Insertion dimension / pressing length max. 3,550 mm
            Insertion dimension / pressing height max. 2,250 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            3 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm
            Pressure force per cylinder 1250 kN / 12500 N

            Printing plate depth 100 mm width 140 mm

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 2.2 kW / 400V

            Control for studio window gluing

            2 pendulum pressure plates 45 degrees

            Machine dimensions W=4500 mm, D=900 mm, H=2600 mm
            Weight approx. 1800 kg

            Photo and video not original, shows press of same type.

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Quickstep_Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2701 · Frame press

          HESS - Quickstep_Video - - gebraucht - Siemens S7-1200

          Technical details
          Working width 3500 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱control Siemens S7-1200
          #2701 Hess Quickstep frame press -------------------------------------- Technical data summary (please inquire about any additional accessories included) -------------------------------------- Generally -------------------------------------- Working width: 3500 mm Working height: 2250 mm Total power requirement: 3 kW Installation dimensions: 4500x980x2610 mm Loading dimensions: 4500 x 980 x 2610 mm Machine weight, approx.: 2000 kg Characteristics: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long-stroke cylinder) > Horizontal adjustment type: electrical > 1 medium pressure bar > Printing plate depth 100mm width 140mm > 3 pcs. pendulum pressure plates > 1 piece small parts allowance Other features -------------------------------------- Opto-electronics, i.e. fully automatic measurement and setting, horizontal Siemens S7-1200 control (technical information according to the manufacturer - no guarantee!) Pictures and video show the original press stock number 2701.
            Working width 3500 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            control Siemens S7-1200
            Description :
            #2701 Hess Quickstep frame press
            --------------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            --------------------------------------

            Generally
            --------------------------------------
            Working width: 3500 mm
            Working height: 2250 mm
            Total power requirement: 3 kW
            Installation dimensions: 4500x980x2610 mm
            Loading dimensions: 4500 x 980 x 2610 mm
            Machine weight, approx.: 2000 kg

            Characteristics:
            --------------------------------------
            > hydraulic: yes
            > Number of vertical press cylinders: 3
            > Number of horizontal press cylinders: 2
            > Vertical adjustment type: electric (long-stroke cylinder)
            > Horizontal adjustment type: electrical
            > 1 medium pressure bar
            > Printing plate depth 100mm width 140mm
            > 3 pcs. pendulum pressure plates
            > 1 piece small parts allowance

            Other features
            --------------------------------------
            Opto-electronics, i.e. fully automatic measurement
            and setting, horizontal

            Siemens S7-1200 control

            (technical information according to the manufacturer - no guarantee!)

            Pictures and video show the original press stock number 2701.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy, 2 Mitteldruckbalken


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2730 · Frame press

          HESS - Speedy, 2 Mitteldruckbalken - - gebraucht -

          Technical details
          Working width 3050 mm︱Working height 2050 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 3970x950x2400 mm︱
          Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine is currently being checked - picture not original, shows same model. Video shows press from our archive (technical data according to the manufacturer - no guarantee!)
            Working width 3050 mm
            Working height 2050 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 3970x950x2400 mm
            Description :
            Hess Speedy frame press with 2 medium pressure beams!
            --------------------------------------

            Insertion dimension / pressing length max. 3,050 mm
            Insertion dimension / pressing height max. 2,050 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            4 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm

            Pressure force per cylinder 1250 kN / 12500 N

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 3.0 kW / 400V

            Machine dimensions W=3970 mm, D=950 mm, H=2400 mm
            Weight approx. 1680 kg

            Machine is currently being checked - picture not original, shows same model.
            Video shows press from our archive

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press CASOLIN Euro


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6821 · Frame press

          CASOLIN - Euro - - 2010 -

          Technical details
          Working width 6000 mm︱Working height 3000 mm︱Number of cylinders 4 St.︱loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm︱weight 3700 kg︱
          Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO" Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!)
            Working width 6000 mm
            Working height 3000 mm
            Number of cylinders 4 St.
            loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm
            weight 3700 kg
            Description :
            Casolin Euro
            -------------------------
            HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO"

            Frame press in an extremely stable steel construction. The machine also allows
            the pressing of already milled wing and frame parts.

            Working dimensions: 6000mm x 3000mm

            Installation dimensions:
            Total length: approx. 7,175 mm
            Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed
            maximum pressing height above) = 4,130 mm

            Loading dimensions:
            Length: approx. 7,175 mm
            Height: approx. 3,790 mm
            Weight: approx. 3,700 kg

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 20.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG Euronova Qickomat


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6822 · Frame press

          MAWEG - Euronova Qickomat - - 1996 -

          Technical details
          Working width 3648 mm︱Working height 2485 mm︱Number of cylinders 6 St.︱
          Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!)
            Working width 3648 mm
            Working height 2485 mm
            Number of cylinders 6 St.
            Description :
            Maweg Euronova Quickomat frame press
            ----------------------------
            with automatic measurement adjustment.

            Cylinder max. opened (maximum working dimensions)
            W 3,648mm x H 2,485mm

            Total length: 4,720mm + 400mm control unit
            Total height: 3,550 mm

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG HILDEBRAND Euro-Z


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6810 · Frame press

          MAWEG HILDEBRAND - Euro-Z - - 1990 -

          Technical details
          Working width 3250 mm︱Working height 2300 mm︱Number of cylinders 7 St.︱Dimensions (L/W/H) 4400 x 1050 x 3200 mm︱loading dimensions L x W x H 4400 x 1050 x 2950 mm︱
          Maweg Hildebrand frame press EURO-Z -------------------------------------- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)
            Working width 3250 mm
            Working height 2300 mm
            Number of cylinders 7 St.
            Dimensions (L/W/H) 4400 x 1050 x 3200 mm
            loading dimensions L x W x H 4400 x 1050 x 2950 mm
            Description :
            Maweg Hildebrand frame press EURO-Z
            --------------------------------------
            Press with 2 medium pressure beams!

            External dimensions approx.:
            Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm
            Loading height: 2,950 mm

            Pressing dimensions: length = 3,250 mm, height = 2,300 mm
            Printing plates: depth=100 mm, width=120 mm

            Selling ex location as stated.
            You can see the press in use until around the end of January 2024.

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          RUCHSER -