'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Hardening Furnace

          Machinelist: Hardening Furnace


          Cleaning unit

          used Other attachments Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Vorwerk Flaechenwaescher


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-592 · Cleaning unit

          Vorwerk - Flaechenwaescher - - 2019 -

          Technical details
          total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HEIN HESO Compo 1020 WST


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-975 · Cleaning unit

          HEIN HESO - Compo 1020 WST - - 2016 -

          Technical details
          dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            dimension 3.709 x 1.744 x 1.942 mm
            loading height 1.002 mm
            weight 1.332 kg
            tank capacity 600 l
            through-put width 307 mm


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit DEBUS DES 119


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6585 · Cleaning unit

          DEBUS - DES 119 - - 2013 -

          Technical details
          6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          swarf cleaner
            6,0 m3/min
            rated current 9 A
            total power requirement 2,5 kW
            Description :
            swarf cleaner


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HAKO HAKOMAT B70 CLHM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S592 · Cleaning unit

          HAKO - HAKOMAT B70 CLHM - - 2013 -

          Technical details
          total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit JETO EUROCLEAN


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4963 · Cleaning unit

          JETO - EUROCLEAN - - 2000 -

          Technical details
          temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱
            temperature 80/130 °C
            0 100 kg
            filling capacity 750 l
            basket dimensions 670x480 mm
            number 25
            total power requirement 43 kW
            weight of the machine ca. 890 kg
            dimensions of the machine ca. 185x190x150 cm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Kohlhoff Hygienetechnik Sailer SSR-1


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-LS7007 · Cleaning unit

          Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -

          Technical details
          0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱
          APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
            0 20 l/min
            total power requirement 4 kW
            Description :
            APRON CLEANER
            APRON CLEANER

            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.
            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 5.800 €
          Datasheet
          Request / Contact

          Hardening Furnace

          used Other attachments Hardening Furnace SNIJSTAAL FABRICAGE B.V. B20


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J608 · Hardening Furnace

          SNIJSTAAL FABRICAGE B.V. - B20 - - 1995 -

          Technical details
          max. temperature 150-500 Grad︱basket dimensions 300x210x460 mm︱total power requirement 2.6 kW︱weight of the machine ca. 80 kg︱dimensions of the machine ca. 0.80x0.60x0.95 m︱
            max. temperature 150-500 Grad
            basket dimensions 300x210x460 mm
            total power requirement 2.6 kW
            weight of the machine ca. 80 kg
            dimensions of the machine ca. 0.80x0.60x0.95 m


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace HERAEUS MR 170


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-11240 · Hardening Furnace

          HERAEUS - MR 170 - - 1989 -

          Technical details
          max. temperature 1000 Grad︱size of opening 170 x 90 mm︱depth of chamber 280 mm︱total power requirement 3 kW︱weight of the machine ca. 80 kg︱dimensions 0,7 x 0,55 x 0,72 m︱
            max. temperature 1000 Grad
            size of opening 170 x 90 mm
            depth of chamber 280 mm
            total power requirement 3 kW
            weight of the machine ca. 80 kg
            dimensions 0,7 x 0,55 x 0,72 m


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace HERAEUS KR 260 E


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-769691 · Hardening Furnace

          HERAEUS - KR 260 E - - 1985 -

          Technical details
          max. temperature 1250 Grad︱size of opening 250 x 160 mm︱depth of chamber 500 mm︱total power requirement 8 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. m︱
            max. temperature 1250 Grad
            size of opening 250 x 160 mm
            depth of chamber 500 mm
            total power requirement 8 kW
            weight of the machine ca. 0,2 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace NOLZEN HS 38 / 23 / 55


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20397 · Hardening Furnace

          NOLZEN - HS 38 / 23 / 55 - - 1984 -

          Technical details
          max. temperature 1.050 Grad︱size of opening 380 x 230 mm︱depth of chamber 680 mm︱volume 60 L︱voltage 380 V︱total power requirement 19,0 kW︱weight of the machine ca. 540 kg︱dimensions of the machine ca. 1,15 x 1,35 x 1,65 m︱
          - Serial-No.: 13817
            max. temperature 1.050 Grad
            size of opening 380 x 230 mm
            depth of chamber 680 mm
            volume 60 L
            voltage 380 V
            total power requirement 19,0 kW
            weight of the machine ca. 540 kg
            dimensions of the machine ca. 1,15 x 1,35 x 1,65 m
            Description :
            - Serial-No.: 13817


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace HERAEUS EFU60/150


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02803 · Hardening Furnace

          HERAEUS - EFU60/150 - - 1972 -

          Technical details
          max. temperature 750 Grad︱size of opening 600x600 mm︱depth of chamber 1800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            max. temperature 750 Grad
            size of opening 600x600 mm
            depth of chamber 1800 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace HERAEUS DKM 5


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-097024 · Hardening Furnace

          HERAEUS - DKM 5 - - 1965 -

          Technical details
          max. temperature 1350 Grad︱size of opening 300 mm︱depth of chamber 600 mm︱total power requirement 25 kW︱weight of the machine ca. 1,5 t︱
          Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h External dimensions approx. width x height x depth 1.000 x 1.200 x 2.100 mm Chamber lining internal Schamotte Connected load approx. 9 & 25 kW - 380 V - 50 cycle Weight approx. 1 .500 kg Accessories / Special Features: Preheating chamber and hardening chamber arranged on top of each other with pneumatic doors which are controlled by foot pedal. Separate switching- and control cabinet with temperature display and ampere display, pre-selection of temperature possible. Deposit area on oven (year 1981) size approx. 500 x 600 mm, Step transformator for control of heating elements (protection and reduction of connected load) Various new heating spirals. These ovens are ideal for tool construction, especially for hardening of high cutting speed tools. Condition : both ovens are in good to very good condition Delivery : ex stock – as inspected Payment : net – after completion of contract We would appreciate your order.
            max. temperature 1350 Grad
            size of opening 300 mm
            depth of chamber 600 mm
            total power requirement 25 kW
            weight of the machine ca. 1,5 t
            Description :
            Hardening Furnace
            Temp. 1350 °C

            H E R E A U S

            Electrically heated Hardening Furnace with Double Chambers
            for preheating and hardening.

            Model DKM 5
            Year 1965
            ______________________________________________________________

            Temperature range max. chamber 1 1.000 °Celsius
            Temperature range max. chamber 2 1.350 °Celsius

            Door opening 300 x 200 mm
            Chamber size width x height x depth 300 x 200 x 500 mm
            For chamber 2 300 x 200 x 600 mm
            Working height above floor 1.050 bzw. 1.625 mm

            Heating up time 20°-1.350° = hardening chamber 2,75 h
            Heating up time 20°-1.000° = preheating chamber 2,00 h

            External dimensions approx.
            width x height x depth 1.000 x 1.200 x 2.100 mm

            Chamber lining internal Schamotte

            Connected load approx. 9 & 25 kW - 380 V - 50 cycle
            Weight approx. 1 .500 kg

            Accessories / Special Features:

            Preheating chamber and hardening chamber arranged on top of each other with pneumatic
            doors which are controlled by foot pedal.
            Separate switching- and control cabinet with temperature display
            and ampere display, pre-selection of temperature possible.
            Deposit area on oven (year 1981) size approx. 500 x 600 mm,
            Step transformator for control of heating elements (protection and
            reduction of connected load)
            Various new heating spirals.

            These ovens are ideal for tool construction, especially for hardening
            of high cutting speed tools.

            Condition : both ovens are in good to very good condition
            Delivery : ex stock – as inspected
            Payment : net – after completion of contract

            We would appreciate your order.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace HERAEUS KR 260


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-162924 · Hardening Furnace

          HERAEUS - KR 260 - - 1960 -

          Technical details
          max. temperature 1150 Grad︱size of opening 260 x 160 mm︱depth of chamber 450 mm︱total power requirement 8 kW︱weight of the machine ca. t︱
          Hardening furnace
            max. temperature 1150 Grad
            size of opening 260 x 160 mm
            depth of chamber 450 mm
            total power requirement 8 kW
            Description :
            Hardening furnace


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Hardening Furnace Nabertherm 45SH


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-58 · Hardening Furnace

          Nabertherm - 45SH - - -

          Technical details
          ︱total power requirement kW︱weight of the machine ca. t︱required space m︱


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •