'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Special Car

          Machinelist: Special Car


          Cleaning unit

          used Other attachments Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Vorwerk Flaechenwaescher


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-592 · Cleaning unit

          Vorwerk - Flaechenwaescher - - 2019 -

          Technical details
          total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HEIN HESO Compo 1020 WST


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-975 · Cleaning unit

          HEIN HESO - Compo 1020 WST - - 2016 -

          Technical details
          dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            dimension 3.709 x 1.744 x 1.942 mm
            loading height 1.002 mm
            weight 1.332 kg
            tank capacity 600 l
            through-put width 307 mm


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit DEBUS DES 119


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6585 · Cleaning unit

          DEBUS - DES 119 - - 2013 -

          Technical details
          6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          swarf cleaner
            6,0 m3/min
            rated current 9 A
            total power requirement 2,5 kW
            Description :
            swarf cleaner


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HAKO HAKOMAT B70 CLHM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S592 · Cleaning unit

          HAKO - HAKOMAT B70 CLHM - - 2013 -

          Technical details
          total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit JETO EUROCLEAN


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4963 · Cleaning unit

          JETO - EUROCLEAN - - 2000 -

          Technical details
          temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱
            temperature 80/130 °C
            0 100 kg
            filling capacity 750 l
            basket dimensions 670x480 mm
            number 25
            total power requirement 43 kW
            weight of the machine ca. 890 kg
            dimensions of the machine ca. 185x190x150 cm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Kohlhoff Hygienetechnik Sailer SSR-1


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-LS7007 · Cleaning unit

          Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -

          Technical details
          0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱
          APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
            0 20 l/min
            total power requirement 4 kW
            Description :
            APRON CLEANER
            APRON CLEANER

            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.
            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 5.800 €
          Datasheet
          Request / Contact

          Special Car

          used Other attachments Special Car Iveco Daily 40C 180 Hi-Matic


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR337 · Special Car

          Iveco - Daily 40C 180 Hi-Matic - - 2020 -

          Technical details
          loading capacität 3.500 kg︱Year 2020 ︱automatic
          Brand Iveco Machine no TR337 Type Daily 40C 180 Hi-Matic Automaat Year of make 2020 Year of construction: 2020 Mileage: 27.500Km Fuel: Diesel, Adblue Emissie code: Euro 6 Automatic 180Hp Towbar
            loading capacität 3.500 kg
            Year 2020
            Description :
            Brand Iveco
            Machine no TR337
            Type Daily 40C 180 Hi-Matic Automaat
            Year of make 2020
            Year of construction: 2020
            Mileage: 27.500Km

            Fuel: Diesel, Adblue
            Emissie code: Euro 6
            Automatic
            180Hp
            Towbar


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car HAKO B45 CL DTC


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR312 · Special Car

          HAKO - B45 CL DTC - - 2016 -

          Technical details
          Lifting capacity - kg︱CNC-Marke - ︱CNC-Modell - ︱machine weight ab. 210 kg︱
          Brand Hako Type B45 CL DTC Year of make 2016 Machine dimensions (L×W×H) 1.350 x 800 x 1.100 mm Machine weight 210 kg Scrubmaster Scrub machine 510/20
            Lifting capacity - kg
            CNC-Marke -
            CNC-Modell -
            machine weight ab. 210 kg
            Description :
            Brand Hako
            Type B45 CL DTC
            Year of make 2016
            Machine dimensions (L×W×H) 1.350 x 800 x 1.100 mm
            Machine weight 210 kg

            Scrubmaster

            Scrub machine
            510/20


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car HAKO B45 CL DTC


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR313 · Special Car

          HAKO - B45 CL DTC - - 2014 -

          Technical details
          Lifting capacity - kg︱CNC-Marke - ︱CNC-Modell - ︱machine weight ab. 210 kg︱
          Brand Hako Type B45 CL DTC Year of make 2014 Machine dimensions (L×W×H) 1.350 x 800 x 1.100 mm Machine weight 210 kg Scrubmaster Scrub machine 510/20
            Lifting capacity - kg
            CNC-Marke -
            CNC-Modell -
            machine weight ab. 210 kg
            Description :
            Brand Hako
            Type B45 CL DTC
            Year of make 2014
            Machine dimensions (L×W×H) 1.350 x 800 x 1.100 mm
            Machine weight 210 kg

            Scrubmaster

            Scrub machine
            510/20


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car ATA GPL3/300


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR310 · Special Car

          ATA - GPL3/300 - - 2008 -

          Technical details
          Lifting capacity 300 kg︱CNC-Marke - ︱CNC-Modell - ︱machine weight ab. 65 kg︱
          Brand ATA Type GPL3/300 Year of make 2008 Machine dimensions (L×W×H) 1.500 x 600 x 620 mm Machine weight 65 kg Lifting capacity 300 kg
            Lifting capacity 300 kg
            CNC-Marke -
            CNC-Modell -
            machine weight ab. 65 kg
            Description :
            Brand ATA
            Type GPL3/300
            Year of make 2008
            Machine dimensions (L×W×H) 1.500 x 600 x 620 mm
            Machine weight 65 kg
            Lifting capacity 300 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car Eichener


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR269 · Special Car

          Eichener - - - 1993 -

          Technical details
          CNC-Marke - ︱CNC-Modell - ︱Control -
          Coil cart capacity: 5000 kg per table Table electrically mobile Coils adjustable in height by means of the scissor table which is located under the support plate
            CNC-Marke -
            CNC-Modell -
            Control -
            Description :
            Coil cart
            capacity: 5000 kg per table
            Table electrically mobile
            Coils adjustable in height by means of the scissor table which is located under
            the support plate


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car Allis - Chalmers M


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR332X · Special Car

          Allis - Chalmers - M - - 1940 -

          Technical details
          Lifting capacity - kg︱CNC-Marke - ︱CNC-Modell -
          Brand Allis - Chalmers M Machine no TR332X Type M Year of make 1940 Machine dimensions (L×W×H) 3.000 x 1.500 x 1.700 mm Oldtimer, Classic car Caterpillar tractor Manual transmission 4 cylinder petrol, 5200 CC “42 HP” Water-cooled License plate: TRJ-09-N Date of first admission: 30-06-1940
            Lifting capacity - kg
            CNC-Marke -
            CNC-Modell -
            Description :
            Brand Allis - Chalmers M
            Machine no TR332X
            Type M
            Year of make 1940
            Machine dimensions (L×W×H) 3.000 x 1.500 x 1.700 mm

            Oldtimer, Classic car
            Caterpillar tractor

            Manual transmission
            4 cylinder petrol, 5200 CC “42 HP”
            Water-cooled
            License plate: TRJ-09-N
            Date of first admission: 30-06-1940


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car Still R07-2/5


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR333 · Special Car

          Still - R07-2/5 - - -

          Technical details
          In stock 3 ︱Year 2003 ︱capacity 16 T︱
          Brand Still Machine no TR333 Type R07-2/5 Year of make 2003 Machine dimensions (L×W×H) 3.300 x 1.200 x 1.950 mm Machine weight 4.000 kg Capacity 16 T In stock 3 Terminal tractor Electrical 2 battery chargers available. Tractor 1: Working hours: 4.237H, Mileage: 37.567Km Tractor 2: Working hours: 4.372H, Mileage: 37.204Km Tractor 3: Working hours: 6.444H, Mileage: 47.984Km Load capacity: 300Kg
            In stock 3
            Year 2003
            capacity 16 T
            Description :
            Brand Still
            Machine no TR333
            Type R07-2/5
            Year of make 2003
            Machine dimensions (L×W×H) 3.300 x 1.200 x 1.950 mm
            Machine weight 4.000 kg
            Capacity 16 T
            In stock 3

            Terminal tractor
            Electrical
            2 battery chargers available.

            Tractor 1: Working hours: 4.237H, Mileage: 37.567Km
            Tractor 2: Working hours: 4.372H, Mileage: 37.204Km
            Tractor 3: Working hours: 6.444H, Mileage: 47.984Km

            Load capacity: 300Kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car NN


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR249 · Special Car

          NN - - - -

          Technical details
          CNC-Marke - ︱CNC-Modell - ︱Control -
          oller conveyor In stock: 43 Rolls for roller conveyor sawing machine Roll width: 600 mm Roll diameter: 200 mm ø Shaft diameter: 55 mm ø
            CNC-Marke -
            CNC-Modell -
            Control -
            Description :
            oller conveyor
            In stock: 43
            Rolls for roller conveyor sawing machine
            Roll width: 600 mm
            Roll diameter: 200 mm ø
            Shaft diameter: 55 mm ø


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car Demag DRA 112-NA-B-O-K-H-X


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR277 · Special Car

          Demag - DRA 112-NA-B-O-K-H-X - - -

          Technical details
          In stock 4 ︱CNC-Marke - ︱CNC-Modell -
          Running wheels for an overhead crane Size: 190 x 90 x 125 mm Running wheel width: 80 mm
            In stock 4
            CNC-Marke -
            CNC-Modell -
            Description :
            Running wheels for an overhead crane
            Size: 190 x 90 x 125 mm
            Running wheel width: 80 mm




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Other attachments Special Car Tractel


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-TR276 · Special Car

          Tractel - - - -

          Technical details
          Lifting capacity 200 kg︱CNC-Marke - ︱CNC-Modell -
          Assembly lift Max. lifting force: 200 kg Max. lifting height: 1400 mm Dim. plateau: 360 x 390 mm
            Lifting capacity 200 kg
            CNC-Marke -
            CNC-Modell -
            Description :
            Assembly lift
            Max. lifting force: 200 kg
            Max. lifting height: 1400 mm
            Dim. plateau: 360 x 390 mm




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •