'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          A + B Werkzeuge Maschinen Handels GmbH - Stockist for used machines

          Machinelist:


          Band Saw

          used  Band Saw MEP - Halbautomat SHARK 282 SXI - Evo


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9173323 · Band Saw

          MEP - Halbautomat - SHARK 282 SXI - Evo - - 2009 -

          Technical details
          cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 x 200 mm︱capacity 60 degrees: flat 140 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱capacity 60 degrees: round 150 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 460 kg︱
          ** Current new price 12.500 euros Furnishing: - semi-automatic band saw machine - with miter device 45° right - 60° left - Microprocessor control EVO to control all functions - with both. Miter device, adjustable via large turntable - either manual or automatic lowering of the saw arch - BI-metal saw band - Cooling device - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Raise the saw frame - Open the vice * Machinevideo : https://www.youtube.com/watch?v=qATZQjTvwnY
            cutting diameter 250 mm
            capacity 90 degrees: flat 280 x 220 mm
            capacity 90 degrees: square 220 x 220 mm
            capacity 45 degrees: flat 220 x 200 mm
            capacity 45 degrees: round 230 mm
            capacity 45 degrees: square 200 x 200 mm
            capacity 60 degrees: flat 140 x 100 mm
            capacity 60 degrees: square 100 x 100 mm
            capacity 60 degrees: round 150 mm
            vice 285 mm
            turning speed range: 36/72 m/min
            dimensions of saw-band 2950x27x0,9 mm
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 460 kg
            Description :
            ** Current new price 12.500 euros

            Furnishing:
            - semi-automatic band saw machine
            - with miter device 45° right - 60° left
            - Microprocessor control EVO to control all functions
            - with both. Miter device, adjustable via large turntable
            - either manual or automatic lowering of the saw arch
            - BI-metal saw band
            - Cooling device
            - Chip removal brush
            - Operating instructions in German

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Raise the saw frame
            - Open the vice

            * Machinevideo :
            https://www.youtube.com/watch?v=qATZQjTvwnY
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 310 SX


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9173327 · Band Saw

          MEP - Halbautomat - SHARK 310 SX - - 1991 -

          Technical details
          cutting diameter 250 mm︱saw band length 2835 x 27 x 0,9 mm︱table height 800 mm︱band speed 36 / 72 m/min︱capacity 90 degrees: flat 310 x 230 mm︱capacity 90 degrees: square 230 x 230 mm︱vice max. 315 mm︱total power requirement 1.8 kW︱weight of the machine ca. 450 kg︱
          Furnishing: - semi-automatic 90 degree band saw - continuous lowering of the saw bow - pneumatic vice, with foot switch - Continuous clamping pressure adjustment from the vice - Machine base - Instruction manual (PDF format) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173327 * Machinevideo : https://www.youtube.com/watch?v=bEyN5tqgSAo
            cutting diameter 250 mm
            saw band length 2835 x 27 x 0,9 mm
            table height 800 mm
            band speed 36 / 72 m/min
            capacity 90 degrees: flat 310 x 230 mm
            capacity 90 degrees: square 230 x 230 mm
            vice max. 315 mm
            total power requirement 1.8 kW
            weight of the machine ca. 450 kg
            Description :
            Furnishing:
            - semi-automatic 90 degree band saw
            - continuous lowering of the saw bow
            - pneumatic vice, with foot switch
            - Continuous clamping pressure adjustment from the vice
            - Machine base
            - Instruction manual (PDF format)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9173327

            * Machinevideo :
            https://www.youtube.com/watch?v=bEyN5tqgSAo
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 282 SXI - Evo / MDE


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8174116 · Band Saw

          MEP - Halbautomat - SHARK 282 SXI - Evo / MDE - - -

          Technical details
          cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 x 200 mm︱capacity 60 degrees: flat 140 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱capacity 60 degrees: round 150 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950 x 27 x 0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 1150 x 1970 mm︱
          Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - optionally manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick
            cutting diameter 250 mm
            capacity 90 degrees: flat 280 x 220 mm
            capacity 90 degrees: square 220 x 220 mm
            capacity 45 degrees: flat 220 x 200 mm
            capacity 45 degrees: round 230 mm
            capacity 45 degrees: square 200 x 200 mm
            capacity 60 degrees: flat 140 x 100 mm
            capacity 60 degrees: square 100 x 100 mm
            capacity 60 degrees: round 150 mm
            vice 285 mm
            turning speed range: 36/72 m/min
            dimensions of saw-band 2950 x 27 x 0,9 mm
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 460 kg
            dimensions of the machine ca. 1150 x 1970 mm
            Description :
            Furnishing:
            - semi-automatic band saw machine
            - with miter device 45 ° right - 60 ° left
            - EVO microprocessor control to control all functions
            - with both. Miter device, adjustable via large turntable
            - optionally manual or autom. Lowering the saw bow
            - BI-metal saw band
            - coolant device
            - Angle stop
            - Chip removal brush
            - Operating instructions in German

            ** Special accessories included:
            - MEP LubeCut microdosing device

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Lifting the saw frame
            - Open the brow stick
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 332-1 SXI evo


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8170067 · Band Saw

          MEP - Halbautomat - SHARK 332-1 SXI evo - - -

          Technical details
          cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3650 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick
            cutting diameter 300 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 x 250 mm
            capacity 60 degrees: flat 170 x 170 mm
            capacity 60 degrees: square 170 x 170 mm
            capacity 60 degrees: round 180 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3650 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Furnishing:
            - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 °
            - autom. Saw bow lowering, infinitely adjustable feed
            - Limit switch-off at the end of the cut
            - hydraulic vice clamping
            - manual function
            - built-in coolant device
            - large turntable with bearings
            - Required instructions
            - saw band
            - Chip removal brush
            - Operating instructions in German

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Lifting the saw frame
            - Opening the browstick
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 512 SXI evo


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8174106 · Band Saw

          MEP - Halbautomat - SHARK 512 SXI evo - - -

          Technical details
          cutting diameter 330 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: square 320 x 320 mm︱capacity 45 degrees: flat 350 x 320 mm︱capacity 45 degrees: round 320 mm︱capacity 45 degrees: square 300 x 300 mm︱capacity 60 degrees: flat 230 x 310 mm︱capacity 60 degrees: square 200 x 200 mm︱capacity 60 degrees: round 200 mm︱turning speed range: 15 - 100 m/min︱dimensions of saw-band 4640 x 34 x 1,1 mm︱engine output 4,0 kW︱weight 1190 kg︱
          Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 60 ° - autom. Saw bow lowering, infinitely adjustable Feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Fig. Shows a similar machine
            cutting diameter 330 mm
            capacity 90 degrees: flat 510 x 320 mm
            capacity 90 degrees: square 320 x 320 mm
            capacity 45 degrees: flat 350 x 320 mm
            capacity 45 degrees: round 320 mm
            capacity 45 degrees: square 300 x 300 mm
            capacity 60 degrees: flat 230 x 310 mm
            capacity 60 degrees: square 200 x 200 mm
            capacity 60 degrees: round 200 mm
            turning speed range: 15 - 100 m/min
            dimensions of saw-band 4640 x 34 x 1,1 mm
            engine output 4,0 kW
            weight 1190 kg
            Description :
            Furnishing:
            - Miter band saw / semi-automatic, for cuts
            Left up to 60 ° / right up to 60 °
            - autom. Saw bow lowering, infinitely adjustable Feed
            - Limit switch-off at the end of the cut
            - hydraulic vice clamping
            - manual function
            - built-in coolant device
            - large turntable with bearings
            - Required instructions
            - saw band
            - Chip removal brush
            - Operating instructions in German

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Lifting the saw frame
            - Open the brow stick

            Fig. Shows a similar machine
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 382-1 SXI evo


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8174105 · Band Saw

          MEP - Halbautomat - SHARK 382-1 SXI evo - - -

          Technical details
          cutting diameter 280 mm︱capacity 90 degrees: flat 380 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 300 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 200 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱dimensions of the machine ca. 1647 x 2157 mm︱weight 720 kg︱
          Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Control modes: - Manual mode - Semi-automatic dynamic operation - The semi-automatic cut is made by manually approaching the saw bow started in any position by actuating the hand switch - Semi-automatic operation (start / stop position of the saw bow is over the keyboard programmed, vice closes / opens automatically, the saw arch is automatically guided back to the start of the cut)
            cutting diameter 280 mm
            capacity 90 degrees: flat 380 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: flat 300 x 200 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 x 250 mm
            capacity 60 degrees: flat 200 x 170 mm
            capacity 60 degrees: square 170 x 170 mm
            capacity 60 degrees: round 180 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3440 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            dimensions of the machine ca. 1647 x 2157 mm
            weight 720 kg
            Description :
            Furnishing:
            - Miter band saw / semi-automatic, for cuts
            Left up to 60 ° / right up to 45 °
            - autom. Saw bow lowering, infinitely adjustable feed
            - Limit switch-off at the end of the cut
            - hydraulic vice clamping
            - manual function
            - built-in coolant device
            - large turntable with bearings
            - Required instructions
            - saw band
            - Chip removal brush
            - Operating instructions in German

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Lifting the saw frame
            - Open the brow stick

            Control modes:
            - Manual mode
            - Semi-automatic dynamic operation
            - The semi-automatic cut is made by manually approaching the saw bow
            started in any position by actuating the hand switch
            - Semi-automatic operation (start / stop position of the saw bow is over
            the keyboard programmed, vice closes / opens automatically,
            the saw arch is automatically guided back to the start of the cut)
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 332-1 SXI evo / MDE


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8174117 · Band Saw

          MEP - Halbautomat - SHARK 332-1 SXI evo / MDE - - -

          Technical details
          cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3650 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱
          Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick
            cutting diameter 300 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 90 degrees: square 260 x 260 mm
            capacity 45 degrees: flat 270 x 200 mm
            capacity 45 degrees: round 260 mm
            capacity 45 degrees: square 250 x 250 mm
            capacity 60 degrees: flat 170 x 170 mm
            capacity 60 degrees: square 170 x 170 mm
            capacity 60 degrees: round 180 mm
            turning speed range: 40 / 80 m/min
            dimensions of saw-band 3650 x 27 x 0,9 mm
            engine output 1,5 / 1,8 kW
            weight 670 kg
            Description :
            Furnishing:
            - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 °
            - autom. Saw bow lowering, infinitely adjustable feed
            - Limit switch-off at the end of the cut
            - hydraulic vice clamping
            - manual function
            - built-in coolant device
            - large turntable with bearings
            - Required instructions
            - saw band
            - Chip removal brush
            - Operating instructions in German

            ** Special accessories included:
            - MEP LubeCut microdosing device

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Lifting the saw frame
            - Opening the browstick
          Datasheet
          Request / Contact
          used  Band Saw MEP - Halbautomat SHARK 282 SXI - Evo


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8170047 · Band Saw

          MEP - Halbautomat - SHARK 282 SXI - Evo - - -

          Technical details
          cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 x 200 mm︱capacity 60 degrees: flat 140 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱capacity 60 degrees: round 150 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 1150 x 1970 mm︱
          Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick
            cutting diameter 250 mm
            capacity 90 degrees: flat 280 x 220 mm
            capacity 90 degrees: square 220 x 220 mm
            capacity 45 degrees: flat 220 x 200 mm
            capacity 45 degrees: round 230 mm
            capacity 45 degrees: square 200 x 200 mm
            capacity 60 degrees: flat 140 x 100 mm
            capacity 60 degrees: square 100 x 100 mm
            capacity 60 degrees: round 150 mm
            vice 285 mm
            turning speed range: 36/72 m/min
            dimensions of saw-band 2950x27x0,9 mm
            total power requirement 1,5 / 1,8 kW
            weight of the machine ca. 460 kg
            dimensions of the machine ca. 1150 x 1970 mm
            Description :
            Furnishing:
            - semi-automatic band saw machine
            - with miter device 45 ° right - 60 ° left
            - EVO microprocessor control to control all functions
            - with both. Miter device, adjustable via large turntable
            - either manual or autom. Lowering the saw bow
            - BI-metal saw band
            - coolant device
            - Angle stop
            - Chip removal brush
            - Operating instructions in German

            Functionality of semi-automatic operation:
            - Clamping the vice
            - Hydraulic lowering of the saw frame
            - Lifting the saw frame
            - Opening the browstick
          Datasheet
          Request / Contact

          Cold Circular Saw

          used  Cold Circular Saw MEP - Halbautomat TIGER 370 SX


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9164064 · Cold Circular Saw

          MEP - Halbautomat - TIGER 370 SX - - 2004 -

          Technical details
          cutting diameter 120 mm︱saw blade diameter 370 mm︱vice 190 mm︱capacity 90 degrees: flat 180 x 95 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: flat 125 x 95 mm︱capacity 60 degrees: round 90,0 mm︱capacity 60 degrees: flat 90 x 95 mm︱dimensions of saw-blade 370 x 32 x 2,5 mm︱cutting speed 15 - 150 m/min︱engine output 3,0 kW︱weight 640 kg︱range L-W-H 900 x 1500 x 1910 mm︱
          ** New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual
            cutting diameter 120 mm
            saw blade diameter 370 mm
            vice 190 mm
            capacity 90 degrees: flat 180 x 95 mm
            capacity 45 degrees: round 110 mm
            capacity 45 degrees: flat 125 x 95 mm
            capacity 60 degrees: round 90,0 mm
            capacity 60 degrees: flat 90 x 95 mm
            dimensions of saw-blade 370 x 32 x 2,5 mm
            cutting speed 15 - 150 m/min
            engine output 3,0 kW
            weight 640 kg
            range L-W-H 900 x 1500 x 1910 mm
            Description :
            ** New price ~ 16.000 euros

            Furnishing :
            - semi-automatic vertical metal circular saw
            - with miter adjustment 60 ° left / 45 ° right
            - swiveling control panel, front left
            - The saw head slides on linear double guides
            - pneumatic vice clamping
            - pneumatic saw blade feed, stepless
            - Infinitely variable speed adjustment from the saw blade
            - 2x replacement saw blade
            - Machine frame with coolant device
            - Operation manual
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль торговця: A + B Werkzeuge Maschinen Handels GmbH

          Зв'язатися з трейдером



            A + B Tools Machinery Trading GmbH
           Ротвег 17
            48683 - Ахаус
            Німеччина
            (0049)-2561-9384-71">(0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de

          Профіль Трейдера




          A + B Werkzeuge Maschinen Handels GmbH   48683 - Ahaus Rottweg 17 Deutschland
          A + B Werkzeuge Maschinen Handels GmbH

          Rottweg 17



          Contact Trader


            A + B Werkzeuge Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Deutschland
            (0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de
            Contact person:

           
          * über 500 Maschinen lagernd -

          Gerne führen wir Ihnen Ihre gewünschte Maschine unter Strom vor *




          Machine category


          · Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Abkantwerkzeuge · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Behälterdrehvorrichtung · Betonstahlbiegemaschine · Bettfräsmaschine - Universal · Biegemaschine horizontal · Bohr- und Fräsmaschine · Breitband-Schleifmaschine · Bügelsäge · Doppelschleifbock · Dornpresse · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Entgratmaschine · Exzenterpresse - Einständer · Flachschleifmaschine · Fräseinrichtung · Fräsmaschine - Universal · Gabelhubwagen - von Hand · Gewindeschneidmaschine · Handspindelpresse · Kaltkreissäge · Kippvorrichtung · Kompressor · Koordinatenbohrmaschine · Krananlage · Kreuztisch · Laserschneidmaschine · Lochstanze · Plasmaschneidegerät · Polierbock · Profilstahlschere · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Rollenbock · Sandstrahlanlage · Scherenhubtisch · Schnellradialbohrmaschine · Schraubstock · Schubladenschrank · Schweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Sickenmaschine · Säulenbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Unterstellbock · Vakuum-Lifter · Vierwalzen - Blechbiegemaschine · Werkbänke · Werkstattpresse - hydraulisch · Zubehör ·