European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Machines available immediately

          Machinelist: Machines available immediately


          Surface Grinding Machine

          used Machines available immediately Surface Grinding Machine ELB Juwel 024_SPS-NK


          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland

          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-020323 · Surface Grinding Machine

          ELB - Juwel 024_SPS-NK - - 2000 -

          Technical details
          grinding length 600 mm︱grinding width 300 mm︱workpiece height 375 mm︱table feed 0,5-40 m/min︱
            grinding length 600 mm
            grinding width 300 mm
            workpiece height 375 mm
            table feed 0,5-40 m/min


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Lathe

          used Machines available immediately CNC Lathe MICROTURN Challenger BNC-3080


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746758 · CNC Lathe

          MICROTURN - Challenger BNC-3080 - - 2008 - FAGOR 8055

          Technical details
          turning diameter mm︱turning length 2000 mm︱control FAGOR 8055 ︱----------------------------------- ︱BASIC FUNCTIONS . ︱ - design principle : flatbed . ︱ - number of spindles 1 ︱ - number of x/z slides 1 ︱ - number of turrets 1 ︱ - live positions : no . ︱WORKING RANGE TURNING . ︱ - lathe chuck diameter 630 mm︱ - Turning diameter over bed max. 760 mm︱ - Turning diameter over compound slide max. 420 mm︱ - workpiece length (max) 2000 mm︱ - workpiece weight max. 3000 kg︱MAIN SPINDLE . ︱ - spindle bore diameter 240 mm︱ - spindle revolutions (min) 10 /min︱ - spindle revolutions (max) 1000 /min︱
          Technical description : CNC Pipe-thread-lathe with big spindle bore diameter. Two manual clamping chucks on each side ( left and right ) of spindle box. Main chuck: SCHUNK ROTA S-PLUS 630-252, 3 jaw chuck. Turning diameter above bed = 760 mm. Turning diameter above cross slide = 420 mm. Working hours = 14050 h, mid November 2022
            turning length 2000 mm
            control FAGOR 8055
            BASIC FUNCTIONS .
            - design principle : flatbed .
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            - live positions : no .
            WORKING RANGE TURNING .
            - lathe chuck diameter 630 mm
            - Turning diameter over bed ma. 760 mm
            - Turning diameter over compou. 420 mm
            - workpiece length (max) 2000 mm
            - workpiece weight max. 3000 kg
            MAIN SPINDLE .
            - spindle bore diameter 240 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 1000 /min
            Description :
            Technical description :

            CNC Pipe-thread-lathe with big spindle bore diameter.
            Two manual clamping chucks on each side ( left and right ) of spindle box.
            Main chuck: SCHUNK ROTA S-PLUS 630-252, 3 jaw chuck.
            Turning diameter above bed = 760 mm.
            Turning diameter above cross slide = 420 mm.

            Working hours = 14050 h, mid November 2022




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact

          Machining Center - Horizontal

          used Machines available immediately Machining Center - Horizontal MAKINO a81-A137 d


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17992 · Machining Center - Horizontal

          MAKINO - a81-A137 d - - 2005 - FANUC Pro-3

          Technical details
          x-travel 900 mm︱y-travel 800 mm︱z-travel 1020 mm︱Control FANUC Pro-3 ︱turning speeds 8.000 U/min︱size of pallet 630 x 630 mm︱table load capacity 1.200 kg︱tool taper HSK-A 100 ︱number of tools in the magazine 137 ︱NC rotary table 0,001 °︱rapid traverse 50 m/min︱spindle drive 50 kW︱torque 1.005 Nm︱total power requirement 40,00 kW︱weight of the machine ca. 21,00 t︱dimensions of the machine ca. 8,30 x 5,00 x 3,50 m︱
          Horizontal machining center with FANUC Porfessional 3 control, chip conveyor, BLUM measuring probe, through-spindle coolant, 137-station tool magazine, electronic handwheel. Without coolant filter, was connected to center supply.
            x-travel 900 mm
            y-travel 800 mm
            z-travel 1020 mm
            Control FANUC Pro-3
            turning speeds 8.000 U/min
            size of pallet 630 x 630 mm
            table load capacity 1.200 kg
            tool taper HSK-A 100
            number of tools in the magazine 137
            NC rotary table 0,001 °
            rapid traverse 50 m/min
            spindle drive 50 kW
            torque 1.005 Nm
            total power requirement 40,00 kW
            weight of the machine ca. 21,00 t
            dimensions of the machine ca. 8,30 x 5,00 x 3,50 m
            Description :
            Horizontal machining center with FANUC Porfessional 3 control,
            chip conveyor, BLUM measuring probe, through-spindle coolant,
            137-station tool magazine, electronic handwheel.
            Without coolant filter, was connected to center supply.


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact

          Keyseating Machine

          used Machines available immediately Keyseating Machine LEISTRITZ Polymat 70/300 CNC


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24158 · Keyseating Machine

          LEISTRITZ - Polymat 70/300 CNC - - 2005 - SIEMENS OP 17

          Technical details
          groove width 70 mm︱drawing length 300 mm︱working speed 0-25 m/min︱Control SIEMENS OP 17 ︱workpiece weight 25.000 kg︱return speed 40 m/min︱dimensions of the machine ca. 1,2x2,3x1,65 m︱drawing capacity 21.000 N︱total power requirement 5 kW︱
          Machine does not need a foundation, accessories Products / Grooving machines - Polymat 25/32/70/100/125 CNC The machine series for medium and large quantities with great flexibility and many options. The universally applicable machines in the CNC series are used for the production of production of standard grooves as well as for the machining of special grooves. special grooves. The up to four controlled axes allow the production of workpieces with with helical grooves, grooves in blind holes and other special applications. CNC control, SIEMENS OP 17, innovative, because: 4-axis -> expandable Program memory Axis interpolation worldwide service multi-line display field Error message in plain text 1Tool equipment WC 3 for groove widths 3-6 mm 1 WC 4 tool kit for groove widths 6-12 mm 1 WC 7 tool kit for groove widths 12-22 mm 1 tool kit WZ WC 9c for groove widths 22-50 mm Various centering cones and centering devices Grooving knife Operating voltage 380 V 50 Hz Color RAL 6011 Translated with DeepL.com (free version)
            groove width 70 mm
            drawing length 300 mm
            working speed 0-25 m/min
            Control SIEMENS OP 17
            workpiece weight 25.000 kg
            return speed 40 m/min
            dimensions of the machine ca. 1,2x2,3x1,65 m
            drawing capacity 21.000 N
            total power requirement 5 kW
            Description :
            Machine does not need a foundation,
            accessories

            Products / Grooving machines - Polymat 25/32/70/100/125 CNC
            The machine series for medium and large quantities with great flexibility
            and many options.

            The universally applicable machines in the CNC series are used for the
            production of
            production of standard grooves as well as for the machining of special grooves.
            special grooves.

            The up to four controlled axes allow the production of workpieces with
            with helical grooves, grooves in blind holes and other special applications.

            CNC control, SIEMENS OP 17, innovative,
            because:

            4-axis -> expandable
            Program memory
            Axis interpolation
            worldwide service
            multi-line display field
            Error message in plain text

            1Tool equipment WC 3
            for groove widths 3-6 mm

            1 WC 4 tool kit
            for groove widths 6-12 mm

            1 WC 7 tool kit
            for groove widths 12-22 mm

            1 tool kit WZ WC 9c
            for groove widths 22-50 mm

            Various centering cones and centering devices

            Grooving knife

            Operating voltage 380 V 50 Hz
            Color RAL 6011

            Translated with DeepL.com (free version)


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used Machines available immediately Turning Automatic Lathe - swiss lathe CITIZEN L20 /L520


          • Horn Werkzeugmaschinen
          • Görlitzer Straße 65
          • 78052 Villingen-Schwenningen
          • Deutschland

          • +49 7721 993 7994
          • horn@horn-wzm.de
            www.horn-wzm.de
          #2082-230981 · Turning Automatic Lathe - swiss lathe

          CITIZEN - L20 /L520 - - 1999 - Cincom Mitsubishi Meldas

          Technical details

          CNC sliding headstock lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 2-26 loading magazine The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as subject to prior sale!
            Description :
            CNC sliding headstock lathe Citizen L520, year 1999
            control, Cincom Mitsubishi Meldas,
            7 axes (X1/Z1/Y1/C1/X2/Z2/C2,
            Bar Ø max. 20 mm,
            turning length max. 205 mm,
            Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees,
            Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees,
            Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining),
            parts conveyor belt,
            FMB Turbo 2-26 loading magazine

            The machine can be inspected under power by appointment.
            Changes and errors in the technical data and information as well as
            subject to prior sale!


        • Horn Werkzeugmaschinen
        • Görlitzer Straße 65
        • 78052 Villingen-Schwenningen
        • Deutschland

        • Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used Machines available immediately Tool Room Milling Machine - Universal EMCO FB-4


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1754 · Tool Room Milling Machine - Universal

          EMCO - FB-4 - - 1997 -

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 350 mm︱table-size 800 x 400 mm︱spindle taper SK 40 ︱spindle turning speed range 50-2500 U/min︱Feedrate X-,Y-,Z-Axis 8-400/8-400/4-200 mm/min︱total power requirement 3,2 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 1,5 x 1,5 x1,68 m︱
          Machine comes from a vocational school - 3-axis digital display HEIDENHAIN - rigid angle table - Coolant device - automatic central lubrication - chip tray - 16 pieces of tool holders - Tool holder carrier - Machine feet - Documentation
            x-travel 450 mm
            y-travel 300 mm
            z-travel 350 mm
            table-size 800 x 400 mm
            spindle taper SK 40
            spindle turning speed range 50-2500 U/min
            Feedrate X-,Y-,Z-Axis 8-400/8-400/4-200 mm/min
            total power requirement 3,2 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 1,5 x 1,5 x1,68 m
            Description :
            Machine comes from a vocational school

            - 3-axis digital display HEIDENHAIN
            - rigid angle table
            - Coolant device
            - automatic central lubrication
            - chip tray
            - 16 pieces of tool holders
            - Tool holder carrier
            - Machine feet
            - Documentation


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Machines available immediately CNC Turning- and Milling Center HWACHEON HI-TECH 200BL MC


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2331 · CNC Turning- and Milling Center

          HWACHEON - HI-TECH 200BL MC - - 2014 - FANUC 0i-TD

          Technical details
          turning diameter 325 mm︱turning length 532 mm︱control FANUC 0i-TD ︱swing over bed 500 mm︱spindle turning speed range 3500 U/min︱bar capacity 65 mm︱travel -x axis 195 mm︱travel -z axis 660 mm︱spindle drive 15/11 kW︱rapid travel - longitudinal/face 30/30 m/min︱tailstock quill diameter 80 mm︱tailstock quill stroke 100 mm︱tailstock quill taper MT 4 ︱total power requirement 30 kVA︱weight of the machine ca. 4,7 t︱dimensions of the machine ca. 2875 x 1675 x 1720 mm︱
          Very good condition, little used ! Machine comes from a factory closure. * CNC control FANUC 0i-TD * C axis * 12-pos turret with powered positions (3,7/2,2 kW, 5000 rpm) * Internal cooling at 17 bar * Tailstock * Collet chuck up to 60 mm diameter * 3-jaw chuck, diameter 250 mm * 2 driven tool holders for machining the lateral surface * 2 driven tool holders for machining the end face
            turning diameter 325 mm
            turning length 532 mm
            control FANUC 0i-TD
            swing over bed 500 mm
            spindle turning speed range 3500 U/min
            bar capacity 65 mm
            travel -x axis 195 mm
            travel -z axis 660 mm
            spindle drive 15/11 kW
            rapid travel - longitudinal/face 30/30 m/min
            tailstock quill diameter 80 mm
            tailstock quill stroke 100 mm
            tailstock quill taper MT 4
            total power requirement 30 kVA
            weight of the machine ca. 4,7 t
            dimensions of the machine ca. 2875 x 1675 x 1720 mm
            Description :
            Very good condition, little used !

            Machine comes from a factory closure.

            * CNC control FANUC 0i-TD
            * C axis
            * 12-pos turret with powered positions (3,7/2,2 kW, 5000 rpm)
            * Internal cooling at 17 bar
            * Tailstock
            * Collet chuck up to 60 mm diameter
            * 3-jaw chuck, diameter 250 mm
            * 2 driven tool holders for machining the lateral surface
            * 2 driven tool holders for machining the end face


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Machines available immediately Hydr. pressbrake TRUMPF TruBend 8170-40


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021033 · Hydr. pressbrake

          TRUMPF - TruBend 8170-40 - - 2007 - CYBELEC ModEva 10S

          Technical details
          pressure 170 t︱chamfer lenght 4050 mm︱distance between columns 3550 mm︱control CYBELEC ModEva 10S ︱column arm 405 mm︱stroke of ram 400 mm︱distance between table / ram 320/720 mm︱control voltage 24 kW︱quantity of oil 350 l︱total power requirement 27,5 kW︱weight of the machine ca. 14800 kg︱
            pressure 170 t
            chamfer lenght 4050 mm
            distance between columns 3550 mm
            control CYBELEC ModEva 10S
            column arm 405 mm
            stroke of ram 400 mm
            distance between table / ram 320/720 mm
            control voltage 24 kW
            quantity of oil 350 l
            total power requirement 27,5 kW
            weight of the machine ca. 14800 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used Machines available immediately Milling Machining Centers 5 Axis HERMLE C 40 UP


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1611 · Milling Machining Centers 5 Axis

          HERMLE - C 40 UP - - 2008 - Heidenhain TNC 530

          Technical details
          travel -x axis 850 mm︱travel -y axis 700 mm︱travel -z axis 500 mm︱control Heidenhain TNC 530 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 195 ︱tool taper HSK-A 63
          5-axis simultaneous machining center | HERMLE - C 40 UP equipped with ITC (80 bar) & additional tool changer and Pallet changer. Additional equipment: - Swivel axis and rotary table - 2 compartment plate changer (PW 800) - incl. 2x pallets 630 x 630 (diameter 800 mm) - tool breakage control by laser The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U | C 40 U | C40 U
            travel -x axis 850 mm
            travel -y axis 700 mm
            travel -z axis 500 mm
            control Heidenhain TNC 530
            turning speeds 10.000 U/min
            numbers of positions in the tool. 195
            tool taper HSK-A 63
            Description :
            5-axis simultaneous machining center | HERMLE - C 40 UP
            equipped with ITC (80 bar) & additional tool changer and Pallet changer.


            Additional equipment:
            - Swivel axis and rotary table
            - 2 compartment plate changer (PW 800)
            - incl. 2x pallets 630 x 630 (diameter 800 mm)
            - tool breakage control by laser


            The machine is in a well-maintained condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C 40 | C40 | C-40 | C40U | C 40 U | C40 U


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          Wire Eroding Machine

          used Machines available immediately Wire Eroding Machine AGIE-CHARMILLES CUT 2000 AWC


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-554 · Wire Eroding Machine

          AGIE-CHARMILLES - CUT 2000 AWC - - 2012 -

          Technical details
          x-axis 350 mm︱y-axis 250 mm︱z-axis 256 mm︱U-axis +/-70 mm︱V-axis +/-70 mm︱dimension of workpiece 750 x 550 x 256 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          -edm hours 29559h
            x-axis 350 mm
            y-axis 250 mm
            z-axis 256 mm
            U-axis +/-70 mm
            V-axis +/-70 mm
            dimension of workpiece 750 x 550 x 256 mm
            Description :
            -edm hours 29559h


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Machines available immediately Lathe -  cycle-controlled VDF BOEHRINGER DUC 560ti


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20339 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUC 560ti - - 2001 - Siemens Sinumerik 810D

          Technical details
          swing over bed 570 mm︱swing diameter over face slide 365 mm︱turning length 4000 mm︱control Siemens Sinumerik 810D ︱centre height 280 mm︱spindle bore 62 mm︱spindle turning speed range 3 - 2500 U/min︱main drive 20 /30 kW︱spindle head Gr. 8 DIN 55027 ︱spindle diameter in front bearing 100 mm︱radial face slide travel 345 mm︱upper slide-adjustment 125 mm︱bed width 360 mm︱feed speeds 5/10 (plan/längs) mm/min︱thread pitch 0,1 - 2000 mm︱tailstock quill diameter 80 mm︱tailstock quill taper MT 5 ︱tailstock quill stroke 190 mm︱max. workpiece weight -without tailstock 200 kg︱max. workpiece weight between centres 1000 kg︱
          Equipment: - CNC control Siemens Sinumerik 810D (ManualTurn) - disk turret 8-fold, make Sauter (DIN 69880 30x55) - without 3-jaw chuck - chip tray - Coolant pump 0.5 bar - tailstock - 1 steady rest 20-315mm - operating instructions
            swing over bed 570 mm
            swing diameter over face slide 365 mm
            turning length 4000 mm
            control Siemens Sinumerik 810D
            centre height 280 mm
            spindle bore 62 mm
            spindle turning speed range 3 - 2500 U/min
            main drive 20 /30 kW
            spindle head Gr. 8 DIN 55027
            spindle diameter in front bearin. 100 mm
            radial face slide travel 345 mm
            upper slide-adjustment 125 mm
            bed width 360 mm
            feed speeds 5/10 (plan/längs) mm/min
            thread pitch 0,1 - 2000 mm
            tailstock quill diameter 80 mm
            tailstock quill taper MT 5
            tailstock quill stroke 190 mm
            max. workpiece weight -without t. 200 kg
            max. workpiece weight between ce. 1000 kg
            Description :
            Equipment:
            - CNC control Siemens Sinumerik 810D (ManualTurn)
            - disk turret 8-fold, make Sauter (DIN 69880 30x55)
            - without 3-jaw chuck
            - chip tray
            - Coolant pump 0.5 bar
            - tailstock
            - 1 steady rest 20-315mm
            - operating instructions


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact

          Machining Center - Horizontal

          used Machines available immediately Machining Center - Horizontal MATSUURA H-Plus 405


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2761 · Machining Center - Horizontal

          MATSUURA - H-Plus 405 - - 2004 - Matsuura G-Tech 16i

          Technical details
          Control Matsuura G-Tech 16i ︱Pallet table size 500x500 mm︱Number of pallets 6 x︱Table load 400 kg︱Movement X-axis mm︱Movement Y-axis mm︱Movement Z-axis mm︱Table indexing °︱Spindle taper ︱Spindle Speed 15.000 1/min︱Spindle motor kW︱Magazin capacity 120 ︱Required floor space mm︱Length mm︱Width mm︱Height mm︱Weight kg︱
            Control Matsuura G-Tech 16i
            Pallet table size 500x500 mm
            Number of pallets 6 x
            Table load 400 kg
            Spindle Speed 15.000 1/min
            Magazin capacity 120
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used Machines available immediately Table Type Boring and Milling Machine TOS Warnsdorf W 100 A


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-2725 · Table Type Boring and Milling Machine

          TOS Warnsdorf - W 100 A - - 1987 -

          Technical details
          spindle diameter 100 mm︱x-travel 1600 mm︱y-travel 1120 mm︱z-axis 1250 mm︱ 900 mm︱ 1.250 x 1.250 mm︱ 360 °︱turning speeds 7,1 - 1.120 U/min︱table load 3,0 t︱ 502,8 m/min︱feed 18- 900 mm/min︱power capacity - milling spindle 11 kW︱transmission ratio 23 ︱max. torque on the spindle 3.350 Nm︱faceplate Ø 600 mm︱radial face slide travel 215 mm︱faceplate turning speed range 7,1 - 224 U/min︱total power requirement 15 kVA︱ 14 t︱
          conv. hori. borer in good condition with facing plate - facing plate - 3 axis digital scale - turning table - table support - coolant system - some equipment
            spindle diameter 100 mm
            x-travel 1600 mm
            y-travel 1120 mm
            z-axis 1250 mm
            900 mm
            1.250 x 1.250 mm
            360 °
            turning speeds 7,1 - 1.120 U/min
            table load 3,0 t
            50
            2,8 m/min
            feed 18- 900 mm/min
            power capacity - milling spindle 11 kW
            transmission ratio 23
            max. torque on the spindle 3.350 Nm
            faceplate Ø 600 mm
            radial face slide travel 215 mm
            faceplate turning speed range 7,1 - 224 U/min
            total power requirement 15 kVA
            14 t
            Description :
            conv. hori. borer in good condition with facing plate

            - facing plate
            - 3 axis digital scale
            - turning table
            - table support
            - coolant system
            - some equipment



        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact

          CNC Lathe

          used Machines available immediately CNC Lathe COLCHESTER TORNADO 300


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-04005 · CNC Lathe

          COLCHESTER - TORNADO 300 - - 1995 - FANUC OT

          Technical details
          turning diameter 530 mm︱turning length 500 mm︱control FANUC OT ︱total power requirement 22 kW︱weight of the machine ca. 3.3 t︱
          GOOD MACHINE CNC CONTROL FANUC OT cuck taikstock vdi 40 turret 12 p chip convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90,5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Width 1500 mm Height 2100 mm Weight 3,3 ton Toolchanger yes Number of tools 12 tools Additional info Chipconveyor VDI-tooling
            turning diameter 530 mm
            turning length 500 mm
            control FANUC OT
            total power requirement 22 kW
            weight of the machine ca. 3.3 t
            Description :
            GOOD MACHINE
            CNC CONTROL FANUC OT
            cuck taikstock vdi 40 turret 12 p
            chip convoyer
            echnical information
            Swing over bed
            530 mm
            Swing over cross-slide
            330 mm
            Distance centre tot centre
            500 mm
            Max longitudinal travel Z-axis
            20 m/min
            Max cross travel X-axis
            10 m/min
            Spindle cone
            A2-8
            Dia of spindle bore
            90,5 mm
            Power on the spindle
            22 kW
            Number of speeds
            4000 rpm
            Command
            Fanuc
            Total power needed
            53 kVa
            Length
            3500 mm
            Width
            1500 mm
            Height
            2100 mm
            Weight
            3,3 ton
            Toolchanger
            yes
            Number of tools
            12 tools
            Additional info
            Chipconveyor
            VDI-tooling



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact

          Boring and dowel driving machine

          used Machines available immediately Boring and dowel driving machine KOCH WinDoor 10


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6856 · Boring and dowel driving machine

          KOCH - WinDoor 10 - - gebraucht -

          Technical details
          Dowel insertingunits ja St.︱Number of spindles 1 St.︱Dowel diameter 8 mm︱boring diameter 8 mm︱Number of heads horizontal 1 St.︱Number of heads vertical 1 St.︱loading dimensions L x W x H 4000x1500x2000 mm︱weight 2000 kg︱
          WinDoor 10 dowel driving machine from operational liquidation of our customer ---------------------------------- Manufacturer description: EQUIPPING THE HORIZONTAL DRILLING STATION 1 drill motor 0.9 KW with 1 drill spindle Drill speed: 3,000 rpm Drilling depth: max. 60 mm Drill holder in collet, with dowel hole blowing 1 piece dowel hole drill D = 8 mm Z AXIS (DRILLING HEIGHT): Program controlled at 6 drilling heights Y-AXIS (DRILLING DEPTH): Program-controlled, automatic adjustment to 6 different dimensions. EQUIPPING THE GLUE APPLICATION AND DOWEL INSERTION STATION 1 dowel driving tool Dowel diameter 8 mm Dowel length 60 mm Dowel projection variable TOLERANCES FOR WOODEN DOWELS Dowel length: +/- 1 mm Dowel diameter: + 0.1 / - 0.2 mm ELECTRONIC GLUE MONITORING ELC (patented) The monitoring device is mounted in front of the glue valve. With each work cycle (glue splashes) the glue flow increases measured. If the glue valve is switched on, there will be no When glue is sprayed, the machine stops working and displays the relevant glue valve on the control cabinet. ----------------- Self-dismantling and loading by buyer ----------------- (Technical information according to the manufacturer - no guarantee!
            Dowel insertingunits ja St.
            Number of spindles 1 St.
            Dowel diameter 8 mm
            boring diameter 8 mm
            Number of heads horizontal 1 St.
            Number of heads vertical 1 St.
            loading dimensions L x W x H 4000x1500x2000 mm
            weight 2000 kg
            Description :
            WinDoor 10 dowel driving machine
            from operational liquidation of our customer
            ----------------------------------

            Manufacturer description:

            EQUIPPING THE HORIZONTAL DRILLING STATION
            1 drill motor 0.9 KW with 1 drill spindle
            Drill speed: 3,000 rpm
            Drilling depth: max. 60 mm
            Drill holder in collet,
            with dowel hole blowing
            1 piece dowel hole drill D = 8 mm

            Z AXIS (DRILLING HEIGHT):
            Program controlled at 6 drilling heights

            Y-AXIS (DRILLING DEPTH):
            Program-controlled, automatic adjustment
            to 6 different dimensions.

            EQUIPPING THE GLUE APPLICATION AND DOWEL INSERTION STATION
            1 dowel driving tool
            Dowel diameter 8 mm
            Dowel length 60 mm
            Dowel projection variable

            TOLERANCES FOR WOODEN DOWELS
            Dowel length: +/- 1 mm
            Dowel diameter: + 0.1 / - 0.2 mm

            ELECTRONIC GLUE MONITORING ELC (patented)
            The monitoring device is mounted in front of the glue valve.
            With each work cycle (glue splashes) the glue flow increases
            measured. If the glue valve is switched on, there will be no
            When glue is sprayed, the machine stops working
            and displays the relevant glue valve on the control cabinet.
            -----------------
            Self-dismantling and loading by buyer
            -----------------
            (Technical information according to the manufacturer - no guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact

          Rolls bending machine - 3 Rolls

          used Machines available immediately Rolls bending machine - 3 Rolls SMT - PULLMAX PV 7 EH


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-55707 · Rolls bending machine - 3 Rolls

          SMT - PULLMAX - PV 7 EH - - 1980 -

          Technical details
          sheet width 2520 mm︱plate thickness 15,00 mm︱pre-bending capacity 12,00 mm︱upper roll diameter Ø 295 mm︱lower roll diameter Ø 295 mm︱bending speed 5.2 m/min︱work height max. 1200 mm︱total power requirement 15.0 kW︱weight of the machine ca. 10900 kg.︱range L-W-H 3250 x 2100 x 1700 mm︱
          Furnishing: - robust electro-hydraulic 3-roller round bending machine - electro-hydraulic folding storage for removing closed pipes - swiveling control unit, front right - Machine is designed for cone bending with parallel rollers * max. bending strength at 2.500 mm .. 7.0 mm steel - electro-hydraulic delivery rollers - electro-hydraulic rotating/rolling movement - Digital position display of the rollers - hardened rollers SAE 1050 CK 45 - Connection cable + plug - original instruction manual + plans
            sheet width 2520 mm
            plate thickness 15,00 mm
            pre-bending capacity 12,00 mm
            upper roll diameter Ø 295 mm
            lower roll diameter Ø 295 mm
            bending speed 5.2 m/min
            work height max. 1200 mm
            total power requirement 15.0 kW
            weight of the machine ca. 10900 kg.
            range L-W-H 3250 x 2100 x 1700 mm
            Description :
            Furnishing:
            - robust electro-hydraulic 3-roller round bending machine
            - electro-hydraulic folding storage for removing closed pipes
            - swiveling control unit, front right
            - Machine is designed for cone bending with parallel rollers
            * max. bending strength at 2.500 mm .. 7.0 mm steel
            - electro-hydraulic delivery rollers
            - electro-hydraulic rotating/rolling movement
            - Digital position display of the rollers
            - hardened rollers SAE 1050 CK 45
            - Connection cable + plug
            - original instruction manual + plans



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Folding Machine

          used Machines available immediately Folding Machine FASTI 2095-25-2.5


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355200 · Folding Machine

          FASTI - 2095-25-2.5 - - -

          Technical details
          sheet width 2540 mm︱plate thickness 2.50 mm︱distance between columns 2600 mm︱daylight opening OW 300 mm︱adjustment UW 115 mm︱pivoting angle 180 Grad︱work height max. 910 mm︱back stop - adjustable bis 690 mm︱voltage 400 V︱total power requirement 3.8 kW︱weight 2250 kg︱range L-W-H 3640 x 1750 x 1600 mm︱
          ** maintained condition (!!) Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back * Adjustment range up to max. ~ 690 mm - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355200
            sheet width 2540 mm
            plate thickness 2.50 mm
            distance between columns 2600 mm
            daylight opening OW 300 mm
            adjustment UW 115 mm
            pivoting angle 180 Grad
            work height max. 910 mm
            back stop - adjustable bis 690 mm
            voltage 400 V
            total power requirement 3.8 kW
            weight 2250 kg
            range L-W-H 3640 x 1750 x 1600 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - robust electro-motive folding machine
            - Bending angle adjustment via electric potentiometer
            * infinitely adjustable
            * with digital value display
            - manual % automatic mode selectable
            - Electrical adjustment of the travel paths of the upper beam
            - manual lower beam adjustment up to 115 mm
            - 1x set of bending tools (installed / used condition)
            - freely movable double foot switch
            - manual material back gauge, adjustable at the back
            * Adjustment range up to max. ~ 690 mm
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355200


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used Machines available immediately Band Saw - Automatic - Horizontal BIANCO Mod. 350


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-16159 · Band Saw - Automatic - Horizontal

          BIANCO - Mod. 350 - - 2000 -

          Technical details
          capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 350 mm︱ 350 x 300 ︱saw band length mm︱table height 835 mm︱band speed 15 - 110 m/min︱Control ︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,7 x 1,7 x 1,8 m︱
          Automatic band saw with roller table.
            capacity 90 degrees: round 350 mm
            capacity 90 degrees: square 350 mm
            350 x 300
            table height 835 mm
            band speed 15 - 110 m/min
            total power requirement 1,5/1,8 kW
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 1,7 x 1,7 x 1,8 m
            Description :
            Automatic band saw with roller table.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Milling Machine - Vertical

          used Machines available immediately Milling Machine - Vertical GOLMATIC MD-23


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024064 · Milling Machine - Vertical

          GOLMATIC - MD-23 - - 2000 -

          Technical details
          x-travel 500 mm︱y-travel 160 mm︱z-travel 400 mm︱
            x-travel 500 mm
            y-travel 160 mm
            z-travel 400 mm


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact

          Laser Cutting Machine

          used Machines available immediately Laser Cutting Machine TRUMPF TruLaser L 5030 + TruFlow 5000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12298 · Laser Cutting Machine

          TRUMPF - TruLaser L 5030 + TruFlow 5000 - - 2006 - Trumpf-Sinumerik 840D

          Technical details
          table length 3000 mm︱table width 1500 mm︱burner heads 15000 W︱workpiece weight 900 kg︱max. feed 200 / simultan x+y 300 m/min︱accuracy +/- 0,10 mm︱ 25 mm︱sheet thickness for stainless steel 20 mm︱Sheet thickness aluminum 12 mm︱control Trumpf-Sinumerik 840D ︱Power connection 105 kVA︱Required air-pressure 7-10 bar︱rated capacity 33-72 kVA︱machine weight ab. 12000 kg︱dimensions of the machine ca. 11,2 x 4,6 x 2,4 m︱transport dimension 2,98 x 2,4 B X H m︱Electric 400 Volt ︱Light barrier behind ︱Light barrier in front
          Little-used high-speed laser cutting system (flatbed / CO2) made by TRUMPF, Mod.TruLaser 5030 Classic with TruFlow 5000 with pallet changer. Design: The workpiece is stationary, the cutting head moves. X-axis as a gantry drive using servo motors and Y + Z axes with linear direct drives. Commissioned in 2007, operating hours approx.: Beam ON: 8200 h, Laser ON: 28,000 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB, USB interface, hard disk space 500MB. Standard equipment: • Laser TLF 5000 • HI-LAS high pressure cutting • Cutting head quick change device • autom. Sheet metal outer edge detection • APC height control and process control • PCS Process Control System • Position laser diode • progr. Cutting gas selection / pressure setting • progr. Performance cycles • Microweld • PMS plasma sensors • SprintLas in all sheet thicknesses • ContourLas • AutoLas Plus • Laser power control • Spray device • Laser logbook function • autom. Pallet changer • autom. Nozzle cleaning • Work area lighting • Small parts/waste conveyor • Multi-chamber suction • Compact dust extractor • TFT color screen • Automatic switch-off • Safety devices • ToPs 100 lite • RJ 45 network connection • Network connection • 3.5" floppy drive Machine was regularly serviced by Trumpf. NEW Power Tube Basic (Send tube) installed in 04/2023 for € 7000 with 12 month warranty! The license of the TruTops Classic software for programming the machine on the PC can be purchased at an additional cost. Machine dealer with own stock of 1600 m².
            table length 3000 mm
            table width 1500 mm
            burner heads 1
            5000 W
            workpiece weight 900 kg
            max. feed 200 / simultan x+y 300 m/min
            accuracy +/- 0,10 mm
            25 mm
            sheet thickness for stainless st. 20 mm
            Sheet thickness aluminum 12 mm
            control Trumpf-Sinumerik 840D
            Power connection 105 kVA
            Required air-pressure 7-10 bar
            rated capacity 33-72 kVA
            machine weight ab. 12000 kg
            dimensions of the machine ca. 11,2 x 4,6 x 2,4 m
            transport dimension 2,98 x 2,4 B X H m
            Description :
            Little-used high-speed laser cutting system (flatbed / CO2) made by TRUMPF,
            Mod.TruLaser 5030 Classic with TruFlow 5000 with pallet changer. Design: The
            workpiece is stationary, the cutting head moves. X-axis as a gantry drive using
            servo motors and Y + Z axes with linear direct drives.
            Commissioned in 2007, operating hours approx.: Beam ON: 8200 h, Laser ON:
            28,000 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB,
            USB interface, hard disk space 500MB.
            Standard equipment:
            • Laser TLF 5000
            • HI-LAS high pressure cutting
            • Cutting head quick change device
            • autom. Sheet metal outer edge detection
            • APC height control and process control
            • PCS Process Control System
            • Position laser diode
            • progr. Cutting gas selection / pressure setting
            • progr. Performance cycles
            • Microweld
            • PMS plasma sensors
            • SprintLas in all sheet thicknesses
            • ContourLas
            • AutoLas Plus
            • Laser power control
            • Spray device
            • Laser logbook function
            • autom. Pallet changer
            • autom. Nozzle cleaning
            • Work area lighting
            • Small parts/waste conveyor
            • Multi-chamber suction
            • Compact dust extractor
            • TFT color screen
            • Automatic switch-off
            • Safety devices
            • ToPs 100 lite
            • RJ 45 network connection
            • Network connection
            • 3.5" floppy drive
            Machine was regularly serviced by Trumpf. NEW Power Tube Basic
            (Send tube) installed in 04/2023 for € 7000 with 12 month warranty!
            The license of the TruTops Classic software for programming the machine on the
            PC can be purchased at an additional cost.
            Machine dealer with own stock of 1600 m².



        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact

          Center Lathe

          used Machines available immediately Center Lathe BOEHRINGER VDF DUE 630


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20331 · Center Lathe

          BOEHRINGER - VDF DUE 630 - - 1989/2024 -

          Technical details
          turning diameter over bed 640 mm︱turning diameter over slide rest 385 mm︱turning length 3000 mm︱center height over bed 315 mm︱centre distance 3000 mm︱digital readout 3-Achsen HEIDENHAIN︱bed width 450 mm︱spindle taper KK 8 DIN 55022︱spindle bore 82 mm︱turning speed range 9 - 1800 U/min︱power requirement 22 kW︱3-jaw-chuck diameter 400 mm︱quick change toolholder MULTIFIX Typ C︱taper in tailstock-quill MK 6 ︱dia. of quill 100 mm︱quill stroke 280 mm︱coolant ︱voltage 400 V︱total power requirement 22 kW︱weight of the machine ca. 6,5 t︱
          - Serial-No.: 01192-01-808 - NEW Bearings on Main Spindle - Main gearbox rebuilt, all gear shaft bearings renewed - guide ways of cross slide grinded and scraped - rapid traverse for Z, Z0 and X-Axis - autom. feed in top support - 3-jaw Chuck, wedge type SMW Ø 400 mm - 3-axis digital readout Heidenhain - quick change tool holder MULTIFIX - fixed steady rest - coolant equipment - machine lamp
            turning diameter over bed 640 mm
            turning diameter over slide rest 385 mm
            turning length 3000 mm
            center height over bed 315 mm
            centre distance 3000 mm
            digital readout 3-Achsen HEIDENHAIN
            bed width 450 mm
            spindle taper KK 8 DIN 55022
            spindle bore 82 mm
            turning speed range 9 - 1800 U/min
            power requirement 22 kW
            3-jaw-chuck diameter 400 mm
            quick change toolholder MULTIFIX Typ C
            taper in tailstock-quill MK 6
            dia. of quill 100 mm
            quill stroke 280 mm
            voltage 400 V
            total power requirement 22 kW
            weight of the machine ca. 6,5 t
            Description :
            - Serial-No.: 01192-01-808
            - NEW Bearings on Main Spindle
            - Main gearbox rebuilt,
            all gear shaft bearings renewed
            - guide ways of cross slide grinded and scraped
            - rapid traverse for Z, Z0 and X-Axis
            - autom. feed in top support
            - 3-jaw Chuck, wedge type SMW Ø 400 mm
            - 3-axis digital readout Heidenhain
            - quick change tool holder MULTIFIX
            - fixed steady rest
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Machines available immediately Hydr. pressbrake TRUMPF TruBend 5130x (B03)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100471 · Hydr. pressbrake

          TRUMPF - TruBend 5130x (B03) - - 2014 -

          Technical details
          Power max. 1300 kN︱Working width max. 3230 mm︱Width betw. Frames 2690 mm︱Throat C-Frame 420 mm︱Max tool high 615 mm︱Stroke maximum 445 mm︱Working speed 25 mm/s︱Way back gauge X 600 mm︱Back strokes speed 220 mm/s︱max. backgauge X 1000 mm︱max. backgauge R 250 mm︱working hours total 13280 Std.︱hydraulik on 5839 Std.︱number of strokes 983606 Stk.︱oil capacity 220 l︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty: Surcharge 2.850 € plus Transport and traveling costs Stable machine base frame - Press bar - on-demand servo drive with 4-cylinder technology - electro-hydraulic ram drive in proportional valve technology - Length measuring system with dynamic spring-back compensation - Plunger travel measuring system - modern monoblock hydraulics - hydraulic oil filling (lifetime filling) - Elctronic pressure balance - spherical bedding of the press bar - Oil cooling System - Electrical cabinet air conditioning up to ambient temperature 40° C - Manuals - no bending Tools Anschlagsystem - 2 Axis backgauge (X and R) - 2 Stop fingers Tool system - self-centering, manual, hardened upper tool holder for vertical tool exchange - hardened, hydraulic bottom tool holder - Pneumatic I-axis Crowning System - Manually crowning system Control system - Touchpoint TruBend - integrated TRUMPF Technology Data - Support-Arm with height adjustment - Network capability - Web-Support Service Control - Communication rail (Magic Shoe) - MobileControl - MobileControl Pro Safety - CE Marking - BendGuard - foot switch - safe finger adjustment from the front - flat front cover - modern protective covering - standard safety features - sliding side doors - rolling rear door
            Power max. 1300 kN
            Working width max. 3230 mm
            Width betw. Frames 2690 mm
            Throat C-Frame 420 mm
            Max tool high 615 mm
            Stroke maximum 445 mm
            Working speed 25 mm/s
            Way back gauge X 600 mm
            Back strokes speed 220 mm/s
            max. backgauge X 1000 mm
            max. backgauge R 250 mm
            working hours total 13280 Std.
            hydraulik on 5839 Std.
            number of strokes 983606 Stk.
            oil capacity 220 l
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.
            1. Option: Machine installation, operator training at buyers location and partially refurbishing including function guaranty:
            Surcharge 2.850 € plus Transport and traveling costs

            Stable machine base frame
            - Press bar
            - on-demand servo drive with 4-cylinder technology
            - electro-hydraulic ram drive in proportional valve technology
            - Length measuring system with dynamic spring-back compensation
            - Plunger travel measuring system
            - modern monoblock hydraulics
            - hydraulic oil filling (lifetime filling)
            - Elctronic pressure balance
            - spherical bedding of the press bar
            - Oil cooling System
            - Electrical cabinet air conditioning up to ambient temperature 40° C
            - Manuals

            - no bending Tools

            Anschlagsystem
            - 2 Axis backgauge (X and R)
            - 2 Stop fingers

            Tool system
            - self-centering, manual, hardened upper tool holder for vertical tool exchange
            - hardened, hydraulic bottom tool holder
            - Pneumatic I-axis

            Crowning System
            - Manually crowning system

            Control system
            - Touchpoint TruBend
            - integrated TRUMPF Technology Data
            - Support-Arm with height adjustment
            - Network capability
            - Web-Support

            Service Control
            - Communication rail (Magic Shoe)
            - MobileControl
            - MobileControl Pro

            Safety
            - CE Marking
            - BendGuard
            - foot switch
            - safe finger adjustment from the front
            - flat front cover
            - modern protective covering
            - standard safety features
            - sliding side doors
            - rolling rear door


        • Broziat GmbH
        • Vorwerker Str. 62a-64
        • 23554 Lübeck
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Machines available immediately Plate Shear - Hydraulic ADIRA ADIRA GHV0835


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1481 · Plate Shear - Hydraulic

          ADIRA - ADIRA GHV0835 - - 1975 -

          Technical details
          gebraucht19759430prompt, Zwischenverkauf vPortugal12400 €︱ 10200 €︱ 13500 mm︱ 8 mm︱ 450 mm︱ 40 1/min︱ 0,5°/1°/1,7° °︱ 1000 mm︱ 14.7 kW︱ 4300 mm︱ 2100 mm︱ 1650 mm︱ 10500 kg︱
          link-guided machine with cutting angle adjustment cutting length limitation trapezoidal spindle for backgauge 1x side stop 2x table support arms balls in the table 18x hold-down devices operating instructions in GERMAN does not complie with the German UVV & Austrian AMVO
            gebraucht
            1975
            9430
            prompt, Zwischenverkauf v
            Portugal
            12400 €
            10200 €
            1
            3500 mm
            8 mm
            450 mm
            40 1/min
            0,5°/1°/1,7° °
            1000 mm
            14.7 kW
            4300 mm
            2100 mm
            1650 mm
            10500 kg
            Description :
            link-guided machine with cutting angle adjustment
            cutting length limitation
            trapezoidal spindle for backgauge
            1x side stop
            2x table support arms
            balls in the table
            18x hold-down devices
            operating instructions in GERMAN
            does not complie with the German UVV & Austrian AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • 10.200 €
          Datasheet
          Request / Contact

          Window spraying plant

          used Machines available immediately Window spraying plant GESCHA Spritzwand, Haengebahn


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6860 · Window spraying plant

          GESCHA - Spritzwand, Haengebahn - - 1999 -

          Technical details
          Length , mm︱Width , mm︱Height , mm︱
          Window painting system consisting of: From the liquidation of window construction ------------------------------------------------------ Gescha paint mist extraction system type A87 Suspension railway with approx. 50-60 hooks and switches various spray devices 5 pcs. dipping tubs Suction pipes of the paint mist extraction system everything up to the Breakthroughs in the wall and ceiling. Self-dismantling and loading! ----------------- (Technical information according to the manufacturer - no guarantee!
            Length , mm
            Width , mm
            Height , mm
            Description :
            Window painting system consisting of:
            From the liquidation of window construction
            ------------------------------------------------------
            Gescha paint mist extraction system type A87
            Suspension railway with approx. 50-60 hooks and switches
            various spray devices
            5 pcs. dipping tubs

            Suction pipes of the paint mist extraction system everything up to the
            Breakthroughs in the wall and ceiling.

            Self-dismantling and loading!
            -----------------
            (Technical information according to the manufacturer - no guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          TOP Manufacturer: