'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          MWB GmbH & CO. KG - Stockist for used machines

          Machinelist:


          Hydr. pressbrake

          used  Hydr. pressbrake HÄMMERLE BM 200-3100


          • MWB GmbH & CO. KG
          • Parkstraße 12
          • 09456 Annaberg-Buchholz
          • Deutschland

          • +49 3733 5068501
          • info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
          #2069-7839 · Hydr. pressbrake

          HÄMMERLE - BM 200-3100 - - 1997 - Infinitron

          Technical details
          pressure 200 t︱Control Infinitron ︱work height max. 1104 mm︱throat 250 mm︱table width 160 mm︱pre-running speed 2,67 mm/min︱work speed 0,001- 0,01 m/min︱return speed 2,67 mm/min︱tank capacity 550 l︱total power requirement 28 kW︱weight of the machine ca. 16,6 t︱dimensions of the machine ca. 4,4x2,7x3,4 m︱
          Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets by separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide technical description Slim stand principle with 500 mm free passage. The stands are provided with swivel bearings on which the table is placed. On the one hand, the cylinders are screwed between the side stands and clearly positioned by means of wedges. On the other hand, the cylinders are bolted to the support at the front and rear, resulting in a stabilizing frame construction. The hydraulic tank is screwed between the side stands and contains all the block hydraulics for controlling the individual machine elements such as the tappet drive, tool clamping, die slide device, etc. The movement of the plunger is controlled by electronically controlled proportional valves, a gray scale being provided on each side of the plunger for precise measurement of the position. Both the parallel position and the exact lower action point position are controlled by the CNC control via the valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at the bottom dead centre. The frame suspension (frame on suspension) is compensated on both sides by mounting the gray scales on separate supports that are attached directly to the table. The ram is rapidly advanced by ancestors under the influence of its own weight, whereby the press cylinders are supplied with oil by means of large suction valves. After the switchover point from the forward speed to the working speed has been reached, the plungers are supplied with oil from the main pump via the proportional valves. The steel press cylinders are double-acting, with the piston rods being connected to the ram by cambered supports and elastic intermediate links. A safety control independent of the electronics registers the parallel position of the ram and switches the machine off immediately if, due to a fault in the electronics of the ram, it does not remain in the parallel position. Otherwise, the dangerous functions of the hydraulics are automatically checked and secured in accordance with the latest accident prevention regulations. The electrical cabinet on the right side of the machine essentially contains the power section, the computer section and the safety section. The connections from the electrical box to the mechanical part are made using plug connections. The machine and accessories comply with the currently applicable provisions of Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 / EEC. The machine price includes the required side and rear protective grilles and two-hand operation with a safety stop.
            pressure 200 t
            Control Infinitron
            work height max. 1104 mm
            throat 250 mm
            table width 160 mm
            pre-running speed 2,67 mm/min
            work speed 0,001- 0,01 m/min
            return speed 2,67 mm/min
            tank capacity 550 l
            total power requirement 28 kW
            weight of the machine ca. 16,6 t
            dimensions of the machine ca. 4,4x2,7x3,4 m
            Description :
            Hydro cushion MHK 1-30
            Three-point die holder DH 1-30
            Stop system A2 with a travel range of 600 mm
            Adjustment of the stop slide along the stop bar by separate
            controlled Z-axes
            Sheet metal support system H 2
            Adjustment of the individual sheet metal support brackets by separately
            controlled W-axes
            Bracket SK 10 with lifting aid 0-45 ° with linear guide

            technical description

            Slim stand principle with 500 mm free passage. The stands are provided with
            swivel bearings on which the table is placed. On the one hand, the cylinders
            are screwed between the side stands and clearly positioned by means of wedges.
            On the other hand, the cylinders are bolted to the support at the front and
            rear, resulting in a stabilizing frame construction.

            The hydraulic tank is screwed between the side stands and contains all the
            block hydraulics for controlling the individual machine elements such as the
            tappet drive, tool clamping, die slide device, etc.

            The movement of the plunger is controlled by electronically controlled
            proportional valves, a gray scale being provided on each side of the plunger
            for precise measurement of the position. Both the parallel position and the
            exact lower action point position are controlled by the CNC control via the
            valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at
            the bottom dead centre. The frame suspension (frame on suspension) is
            compensated on both sides by mounting the gray scales on separate supports that
            are attached directly to the table.

            The ram is rapidly advanced by ancestors under the influence of its own weight,
            whereby the press cylinders are supplied with oil by means of large suction
            valves. After the switchover point from the forward speed to the working speed
            has been reached, the plungers are supplied with oil from the main pump via the
            proportional valves.

            The steel press cylinders are double-acting, with the piston rods being
            connected to the ram by cambered supports and elastic intermediate links. A
            safety control independent of the electronics registers the parallel position
            of the ram and switches the machine off immediately if, due to a fault in the
            electronics of the ram, it does not remain in the parallel position. Otherwise,
            the dangerous functions of the hydraulics are automatically checked and secured
            in accordance with the latest accident prevention regulations.

            The electrical cabinet on the right side of the machine essentially contains
            the power section, the computer section and the safety section. The connections
            from the electrical box to the mechanical part are made using plug connections.

            The machine and accessories comply with the currently applicable provisions of
            Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 /
            EEC.

            The machine price includes the required side and rear protective grilles and
            two-hand operation with a safety stop.

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          MWB GmbH  &  Co. KG   09456 - Annaberg-Buchholz Parkstraße 12 Deutschland
          MWB GmbH & Co. KG

          Parkstraße 12



          Contact Trader


            MWB GmbH & Co. KG
           Parkstraße 12
            09456 - Annaberg-Buchholz
            Deutschland
            +49 3733 5068501
           
            info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
            Contact person:

           




          Machine category


          3D Universal Messmaschine · Abkantpresse - hydraulisch · Absauganlage · Bearbeitungszentrum 5 Achs · Bettfräsmaschine - Universal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Fahrständerfräsmaschine · Fräsmaschine - Universal · Koordinatenbohrwerk - Zweiständer · Koordinatenmeßmaschine · Lehrenbohrwerk - Horizontal · Lehrenbohrwerk - Vertikal · Revolverdrehmaschine · Werkzeug Voreinstellgerät ·