'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 
          1. machine-categorie:
          2. Metal Processing
          3. Sheet metal working - shaeres - bending

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending

          Flanging Machine

          used Sheet metal working / shaeres / bending Flanging Machine HESSE by SAHINLER SDK 8

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1019 · Flanging Machine

          HESSE by SAHINLER - SDK 8 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Türkei ︱ 92000 €︱ 1849.2 €︱ 8 mm︱ 5 mm︱ 80 mm︱ 10 mm︱ 4500 mm︱ 720 mm︱ 95 (R 80) / 35 (R 25) mm︱ 10 kW︱ 4900 mm︱ 1700 mm︱ 2700 mm︱ 4550 kg︱
          incl. flanging rolls for mild steel (R25) incl. cutting blade hydraulically adjustable carrier from top to bottom cutting and flanging on the same head lateral support rolls Operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            92000 €
            1849.2 €
            8 mm
            5 mm
            80 mm
            10 mm
            4500 mm
            720 mm
            95 (R 80) / 35 (R 25) mm
            10 kW
            4900 mm
            1700 mm
            2700 mm
            4550 kg
            Description :
            incl. flanging rolls for mild steel (R25)
            incl. cutting blade
            hydraulically adjustable carrier from top to bottom
            cutting and flanging on the same head
            lateral support rolls
            Operator panel with touch screen

            Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact

          Pipe-Bending Machine

          used Sheet metal working / shaeres / bending Pipe-Bending Machine AMGA

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BG153X · Pipe-Bending Machine

          AMGA - - - -

          Technical details
          - ︱ - ︱
          Capacity till: 2 " Includes attachment for thin-walled Mold capacity: 22 mm ø Equipped with 4 stroke adjustments Various molds up to 2 " present
            -
            -
            Description :
            Capacity till: 2 "

            Includes attachment for thin-walled
            Mold capacity: 22 mm ø
            Equipped with 4 stroke adjustments
            Various molds up to 2 " present



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Pipe-Bending Machine Amga 3

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BG162X · Pipe-Bending Machine

          Amga - 3 - - -

          Technical details
          Maximum outer diameter - mm ø︱Extra mould - mm ø︱Machine dimensions (lxwxh) 1.300 x 1.200 x 1.300 mm︱stroke 400 mm︱capacity 76,20 mm︱
          Brand Amga Type 3 Capacity up to 76 mm Foot control Including various accessories Capacity 76.20 mm Max. capacity 3 " Stroke 400 mm Including various accessories Machine size (lxwxh) 1.300 x 1.200 x 1.300 mm Miscellaneous tools: 16/20/25/33/35/40/45/60 mm
            Maximum outer diameter - mm ø
            Extra mould - mm ø
            Machine dimensions (lxwxh) 1.300 x 1.200 x 1.300 mm
            stroke 400 mm
            capacity 76,20 mm
            Description :
            Brand Amga
            Type 3
            Capacity up to 76 mm
            Foot control
            Including various accessories
            Capacity 76.20 mm
            Max. capacity 3 "
            Stroke 400 mm
            Including various accessories
            Machine size (lxwxh) 1.300 x 1.200 x 1.300 mm

            Miscellaneous tools: 16/20/25/33/35/40/45/60 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 15-150

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-256 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 15-150 - - 2024 -

          Technical details
          neu ︱ 2024 ︱ 9729 ︱ Juni 2024, Zwischenverkau ︱ Türkei ︱ 31400 €︱ 637.42 €︱ 1550 mm︱ 7 mm︱ 7 mm︱ 4.5 mm︱ 4.5 mm︱ 3.5 mm︱ 150 mm︱ 150 mm︱ 130 mm︱ 1,5 / 6 m/min︱ 4 kW︱ 3750 mm︱ 960 mm︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            2024
            9729
            Juni 2024, Zwischenverkau
            Türkei
            31400 €
            637.42 €
            1550 mm
            7 mm
            7 mm
            4.5 mm
            4.5 mm
            3.5 mm
            150 mm
            150 mm
            130 mm
            1,5 / 6 m/min
            4 kW
            3750 mm
            960 mm
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-268 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 52100 €︱ 1047.21 €︱ 2050 mm︱ 11 mm︱ 11 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 4080 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            52100 €
            1047.21 €
            2050 mm
            11 mm
            11 mm
            9 mm
            9 mm
            7 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            4080 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-150

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-250 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-150 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 35000 €︱ 710.5 €︱ 2050 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 4 mm︱ 3 mm︱ 150 mm︱ 150 mm︱ 130 mm︱ 1,5 / 6 m/min︱ 4 kW︱ 4250 mm︱ 960 mm︱ 1100 mm︱ 2800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            35000 €
            710.5 €
            2050 mm
            6 mm
            6 mm
            4 mm
            4 mm
            3 mm
            150 mm
            150 mm
            130 mm
            1,5 / 6 m/min
            4 kW
            4250 mm
            960 mm
            1100 mm
            2800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1483 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 64100 €︱ 1288.41 €︱ 2550 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1550 mm︱ 6800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            64100 €
            1288.41 €
            2550 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1550 mm
            6800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 20-280

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2243 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 20-280 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 82900 €︱ 1666.29 €︱ 2050 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 16 mm︱ 12 mm︱ 280 mm︱ 280 mm︱ 220 mm︱ 1,5 / 5 m/min︱ 16,5 kW︱ 4350 mm︱ 1700 mm︱ 1850 mm︱ 8550 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            82900 €
            1666.29 €
            2050 mm
            20 mm
            20 mm
            16 mm
            16 mm
            12 mm
            280 mm
            280 mm
            220 mm
            1,5 / 5 m/min
            16,5 kW
            4350 mm
            1700 mm
            1850 mm
            8550 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT (PRICES ON REQUEST):
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 15-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2161 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 15-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 49000 €︱ 994.7 €︱ 1550 mm︱ 12 mm︱ 12 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 220 mm︱ 200 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 3900 mm︱ 1150 mm︱ 1250 mm︱ 3600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            49000 €
            994.7 €
            1550 mm
            12 mm
            12 mm
            10 mm
            10 mm
            8 mm
            220 mm
            200 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            3900 mm
            1150 mm
            1250 mm
            3600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-180

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2213 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-180 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 40500 €︱ 822.15 €︱ 2050 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 180 mm︱ 180 mm︱ 150 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3790 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            40500 €
            822.15 €
            2050 mm
            8 mm
            8 mm
            6 mm
            6 mm
            4 mm
            180 mm
            180 mm
            150 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3790 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 30-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-262 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 62200 €︱ 1250.22 €︱ 3100 mm︱ 9 mm︱ 8 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1470 mm︱ 6850 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            62200 €
            1250.22 €
            3100 mm
            9 mm
            8 mm
            7 mm
            7 mm
            5 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1470 mm
            6850 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-270 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 59000 €︱ 1185.9 €︱ 2550 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1470 mm︱ 6170 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            59000 €
            1185.9 €
            2550 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1470 mm
            6170 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 30-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-272 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 67700 €︱ 1360.77 €︱ 3100 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1550 mm︱ 7685 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            67700 €
            1360.77 €
            3100 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1550 mm
            7685 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-274 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 56100 €︱ 1127.61 €︱ 2050 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4300 mm︱ 1600 mm︱ 1470 mm︱ 5450 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            56100 €
            1127.61 €
            2050 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4300 mm
            1600 mm
            1470 mm
            5450 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-276 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 60500 €︱ 1216.05 €︱ 2050 mm︱ 16 mm︱ 16 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4300 mm︱ 1600 mm︱ 1550 mm︱ 6100 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            60500 €
            1216.05 €
            2050 mm
            16 mm
            16 mm
            13 mm
            13 mm
            10 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4300 mm
            1600 mm
            1550 mm
            6100 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-260 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 53700 €︱ 1079.37 €︱ 2550 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4900 mm︱ 1150 mm︱ 1250 mm︱ 4600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            53700 €
            1079.37 €
            2550 mm
            9 mm
            9 mm
            7 mm
            7 mm
            5 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4900 mm
            1150 mm
            1250 mm
            4600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 30-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-278 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 30-350 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 127000 €︱ 2527.3 €︱ 3100 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 16 mm︱ 12 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 6000 mm︱ 2200 mm︱ 1900 mm︱ 15000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            127000 €
            2527.3 €
            3100 mm
            20 mm
            20 mm
            16 mm
            16 mm
            12 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            6000 mm
            2200 mm
            1900 mm
            15000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 20-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-282 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 20-350 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 111100 €︱ 2210.89 €︱ 2050 mm︱ 30 mm︱ 30 mm︱ 25 mm︱ 25 mm︱ 20 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 5000 mm︱ 2000 mm︱ 1900 mm︱ 11000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            111100 €
            2210.89 €
            2050 mm
            30 mm
            30 mm
            25 mm
            25 mm
            20 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            5000 mm
            2000 mm
            1900 mm
            11000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-200

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2215 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-200 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 45900 €︱ 931.77 €︱ 2050 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 200 - 220 mm︱ 200 - 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3950 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            45900 €
            931.77 €
            2050 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            200 - 220 mm
            200 - 220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3950 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 25-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-280 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 25-350 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 117800 €︱ 2344.22 €︱ 2550 mm︱ 25 mm︱ 25 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 5500 mm︱ 2000 mm︱ 1900 mm︱ 13000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            117800 €
            2344.22 €
            2550 mm
            25 mm
            25 mm
            20 mm
            20 mm
            16 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            5500 mm
            2000 mm
            1900 mm
            13000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact

          Section Bender

          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 50

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1021 · Section Bender

          HESSE by SAHINLER - HPK 50 - - 2024 -

          Technical details
          neu ︱ 2024 ︱ 9718 ︱ prompt, Zwischenverkauf v ︱ Türkei ︱ 9500 €︱ 196.65 €︱ 1 ︱ 50 mm︱ 152 mm︱ 162 mm︱ 3 ︱ 1.1 kW︱ 4,5 m/min︱ 60x10 mm / 600 mm; 20x10 ︱ 100x15 mm / 600 mm; 50 x ︱ 35x35 mm / 600 mm; 15x15 ︱ 35 mm / 600 mm; Dm. 20 mm ︱ 70x2 mm / 1200 mm; Dm. 25 ︱ 70x30x3 mm / 1500 mm; 30x ︱
          3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!
            neu
            2024
            9718
            prompt, Zwischenverkauf v
            Türkei
            9500 €
            196.65 €
            1
            50 mm
            152 mm
            162 mm
            3
            1.1 kW
            4,5 m/min
            60x10 mm / 600 mm; 20x10
            100x15 mm / 600 mm; 50 x
            35x35 mm / 600 mm; 15x15
            35 mm / 600 mm; Dm. 20 mm
            70x2 mm / 1200 mm; Dm. 25
            70x30x3 mm / 1500 mm; 30x
            Description :
            3 mech. driven rolls (brake motor)
            hardened shafts
            top roll hydraulic adjustable
            hardened universal rolls
            lateral rolls adjustable in 1 axis
            horizontal and vertical operation
            double foot pedal forfor- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 60

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1025 · Section Bender

          HESSE by SAHINLER - HPK 60 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 12900 €︱ 264.45 €︱ 60 mm︱ 215 mm︱ 215 mm︱ 3 ︱ 1.5 kW︱ 4 m/min︱ 80x20 mm / 1200 mm; 40x10 ︱ 120x25 mm / 600 mm; 50 x ︱ 50x50 mm / 800 mm; 20x20 ︱ Ø 50 mm / 800 mm; Ø 20 mm ︱ Ø 100x2 mm / 1600 mm; Ø 6 ︱ 80x40x3 mm / 1400 mm; 40x ︱ 70x3 mm / 1600 mm; 40x2 m ︱ 70x70x7 mm / 1000 mm; 40x ︱ 70x70x7 mm / 1200 mm; 40x ︱
          3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES!
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            12900 €
            264.45 €
            60 mm
            215 mm
            215 mm
            3
            1.5 kW
            4 m/min
            80x20 mm / 1200 mm; 40x10
            120x25 mm / 600 mm; 50 x
            50x50 mm / 800 mm; 20x20
            Ø 50 mm / 800 mm; Ø 20 mm
            Ø 100x2 mm / 1600 mm; Ø 6
            80x40x3 mm / 1400 mm; 40x
            70x3 mm / 1600 mm; 40x2 m
            70x70x7 mm / 1000 mm; 40x
            70x70x7 mm / 1200 mm; 40x
            Description :
            3 mech. driven rolls (brake motor)
            hardened shafts
            top roll hydraulic adjustable
            hardened universal rolls
            lateral rolls adjustable in 1 axis
            horizontal and vertical operation
            double foot pedal forfor- and backward drive
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 260 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 40

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-922 · Section Bender

          HESSE by SAHINLER - HPK 40 - - -

          Technical details
          neu ︱ ca. 8 Wochen ab Auftragse ︱ Türkei ︱ 12000 €︱ 246 €︱ 35 mm︱ 137 mm︱ 137 mm︱ 3 ︱ 1.1 kW︱ 7 m/min︱ 35x8 mm / 300 mm ︱ 50x12 mm / 400 mm ︱ 18x18 mm / 250 mm ︱ Ø 22 mm / 200 mm ︱ Ø 40x1,5 mm / 500 mm ︱ 30x15x2,5 mm / 500 mm ︱ 25x25x2 mm / 450 mm ︱ 35x35x5 mm / 400 mm ︱ 30x30x4 mm / 550 mm ︱
          3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!
            neu
            ca. 8 Wochen ab Auftragse
            Türkei
            12000 €
            246 €
            35 mm
            137 mm
            137 mm
            3
            1.1 kW
            7 m/min
            35x8 mm / 300 mm
            50x12 mm / 400 mm
            18x18 mm / 250 mm
            Ø 22 mm / 200 mm
            Ø 40x1,5 mm / 500 mm
            30x15x2,5 mm / 500 mm
            25x25x2 mm / 450 mm
            35x35x5 mm / 400 mm
            30x30x4 mm / 550 mm
            Description :
            3 mech. driven rolls (brake motor)
            hardened and ground shafts
            lower rolls hydraulic adjustable
            horizontal and vertical operation
            standard set of rolls
            foot pedal forfor- and backward drive
            2 digital readouts
            control panel
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender HESSE by SAHINLER HPK 120

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1039 · Section Bender

          HESSE by SAHINLER - HPK 120 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 51000 €︱ 1025.1 €︱ 120 mm︱ 390 mm︱ 3 ︱ 15 kW︱ 2/7,5 m/min︱ 125x25 mm / 1.200 mm; 30x ︱ 200x50 mm / 1.000 mm; 100 ︱ 65x65 mm / 750 mm; 20x20 ︱ Ø 80 mm / 850 mm; Ø 20 mm ︱ Ø 160x4 mm / 2.800 mm; Ø ︱ 120x40x4 mm / 1.800 mm; 3 ︱ 90x90x5 mm / 1.800 mm; 30 ︱ 120x120x12 mm / 1.200 mm; ︱ 100x100x10 mm / 1.200 mm; ︱ UPN 220 / 1.000 mm; UPN 1 ︱
          3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            51000 €
            1025.1 €
            120 mm
            390 mm
            3
            15 kW
            2/7,5 m/min
            125x25 mm / 1.200 mm; 30x
            200x50 mm / 1.000 mm; 100
            65x65 mm / 750 mm; 20x20
            Ø 80 mm / 850 mm; Ø 20 mm
            Ø 160x4 mm / 2.800 mm; Ø
            120x40x4 mm / 1.800 mm; 3
            90x90x5 mm / 1.800 mm; 30
            120x120x12 mm / 1.200 mm;
            100x100x10 mm / 1.200 mm;
            UPN 220 / 1.000 mm; UPN 1
            Description :
            3 rolls driven (hydromotor and planetary gearbox)
            shafts made of special steel,hardened and ground
            hydraulic adjustment of the 2 lower rolls
            hardened universal rolls
            lateral rolls hydraulic adjustable in 3 axes
            horizontal and vertical operation
            mobile operating panel
            2 working speeds
            digital read out (3 axes)
            machine and equipment accordingto the CE regulations
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 210 REFERENCES!


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   
            •

          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.

          TOP Manufacturer:

          OSTAS - TRUMPF - HESSE BY DURMA - ERMAK - DURMA - FASTI - NN - EHT - ASSISTMACH - HUVEMA -

          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені