'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2024

          Vessel Turning Unit

          Machinelist: Vessel Turning Unit

          Mandrel tube bending machine

          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Mega Bender 030 / Top 030

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6387 · Mandrel tube bending machine

          ERCOLINA - Mega Bender 030 / Top 030 - - 2014 -

          Technical details
          tube diameter 60 mm︱wall strength 3 mm︱bending radius min. 2 x Rohr-Ø ÷ R200 mm︱bending angle 0 - 180 °︱gas tube pipelines 2" (60.,3mm) mm︱speed stufenlos 0,5 - 2,0 ︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱
          - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle
            tube diameter 60 mm
            wall strength 3 mm
            bending radius min. 2 x Rohr-Ø ÷ R200 mm
            bending angle 0 - 180 °
            gas tube pipelines 2" (60.,3mm) mm
            speed stufenlos 0,5 - 2,0
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            Description :
            - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic
            design (6000 mm pipe slide length)
            - Electromechanical drive of the bending axis
            - hydraulic clamping
            - mandrel feed / extract
            - 30 programs x 9 bending angle + correction angle


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12117 · Mandrel tube bending machine

          TRANSFLUID - DB 628 ST / SPS - - 1996 - IPU 20

          Technical details
          tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website. ︱
          Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².
            tube diameter 6 - 28 mm
            wall strength 2 mm
            bending radius min. 2 x D
            Control IPU 20
            bending radius max. 5,0 x D mm
            bending angle max. 190 °
            arbor length 3000 mm
            operating pressure 180 bar
            hydraulic motor 4 kW
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
            Bending segments 15-20-26-28 mm
            Bending mandrels 4
            Operation panel 0,5 x 0,6 x 1,03 m
            Description :
            Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
            20 angles and display in the control panel for bending angle specification,
            angle detection and angle measurement via absolute value encoder, autom. tool
            plate reset, Turning device with digital display, hydr. quick chuck, aut.
            Mandrel lubrication, adjustable length stops.
            Operating modes: MANUAL and semi-automatic.
            Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
            clamp forward / backward, mandrel forward / backward, bending forward /
            backward /, locking forward / backward, mandrel lubrication, turning device
            forward / backward, plate reset, length stop forward, emergency stop.
            The machine comes from a prototype construction and was only used a little
            until 2000. After that, the machines of this department were sold. However, the
            purchaser did not use the pipe bending machine and therefore it has only stood
            in the warehouse and has not worked since then.
            Please notice that the price of a new machine today is over € 60.000,--.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ CNC 25 MR

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02675 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - CNC 25 MR - - 1994 -

          Technical details
          tube diameter 25 mm︱wall strength 2 mm︱bending radius min. 10 mm︱Control ︱bending radius max. 75 mm︱total power requirement 11 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. m︱
            tube diameter 25 mm
            wall strength 2 mm
            bending radius min. 10 mm
            bending radius max. 75 mm
            total power requirement 11 kW
            weight of the machine ca. 1,45 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ PERFEKT WE 40 D

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01220 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - PERFEKT WE 40 D - - 1977 -

          Technical details
          tube diameter max. 38 mm︱wall strength 2 mm︱bar material dia. min. 10 mm︱bending radius min. 35 mm︱bending radius max. 150 mm︱pull up length of tube 4500 mm︱bending angle max. 180 °︱accuracy of bending angle ± 0,2 °︱total power requirement 7,5 kW︱weight of the machine ca. 1,2 t︱dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m︱
          - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm
            tube diameter max. 38 mm
            wall strength 2 mm
            bar material dia. min. 10 mm
            bending radius min. 35 mm
            bending radius max. 150 mm
            pull up length of tube 4500 mm
            bending angle max. 180 °
            accuracy of bending angle ± 0,2 °
            total power requirement 7,5 kW
            weight of the machine ca. 1,2 t
            dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m
            Description :
            - with 8-pos. bending angle pre-selection
            - crawler gear control
            - positioning device by hand
            - tube twist device

            Following bending tools are with the machine:
            - ø 10 mm, radius 27,5 mm
            - ø 12 mm, radius 35 mm
            - ø 12 mm, radius 56 mm
            - ø 15 mm, radius 35 mm
            - ø 15 mm, radius 57,5 mm
            - ø 18 mm, radius 35 mm
            - ø 18 mm, radius 59 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Ercobender EB76 CNC V7S

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1081 · Mandrel tube bending machine

          ERCOLINA - Ercobender EB76 CNC V7S - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 121200 €︱ 2411.88 €︱ 76 mm︱ 5700 mm︱ 1100 mm︱ 1550 mm︱ 2700 kg︱ 25 cm³︱ 76,1 x 6,8 mm︱ 2”1/2 mm︱ 76,2 x 3,8 mm︱ 63,5 x 63,5 x 5,6 mm︱ 70 x 50 x 8 mm︱ 70 x 50 x 6 mm︱ 79 mm︱ 250 mm︱ 20 mm︱
          FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            121200 €
            2411.88 €
            76 mm
            5700 mm
            1100 mm
            1550 mm
            2700 kg
            25 cm³
            76,1 x 6,8 mm
            2”1/2 mm
            76,2 x 3,8 mm
            63,5 x 63,5 x 5,6 mm
            70 x 50 x 8 mm
            70 x 50 x 6 mm
            79 mm
            250 mm
            20 mm
            Description :
            FST clamping system (Patented)
            6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis),
            bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis)
            and hydraulic mandrel movement (Y3)
            Touch screen control with 3D display of the tube
            Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment
            Importing files in iges and dxf format (optional)
            Integrated Wi-Fi

            FURTHER MANDREL LENGTHS ON REQUEST


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA TB80-A/P80NC-4

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2040 · Mandrel tube bending machine

          ERCOLINA - TB80-A/P80NC-4 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 64000 €︱ 1286.4 €︱ 76 mm︱ 4535 mm︱ 1145 mm︱ 1400 mm︱ 1488 kg︱ 18 cm³︱ 76 x 3,6 mm︱ 76 x 2,3 mm︱ 70x70x3 mm︱ 70x50x3 mm︱ 70x50x6 mm︱ 76 mm︱ 200 mm︱ 10 mm︱ 195 °︱
          Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI)
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            64000 €
            1286.4 €
            76 mm
            4535 mm
            1145 mm
            1400 mm
            1488 kg
            18 cm³
            76 x 3,6 mm
            76 x 2,3 mm
            70x70x3 mm
            70x50x3 mm
            70x50x6 mm
            76 mm
            200 mm
            10 mm
            195 °
            Description :
            Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C)

            New TCPlus control
            • 7” colour touch screen
            • Icons for ease use
            • Automatic mode, manual mode, programming mode
            • Advanced OFFSET function
            • Easy language change
            • Auto-tuning of the main machine components
            • Programmable bending speed for each single bend of
            the program
            • Unlimited programs possibility (USB port)
            • Every program can contain up to 30 different bends
            • Available extensions of 2 meters each (optional)
            • Tie bar (optional - art. TB80-TI)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Topbender TB 050 PT A3/H48

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-969 · Mandrel tube bending machine

          ERCOLINA - Topbender TB 050 PT A3/H48 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 29300 €︱ 594.79 €︱ 50 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 430 kg︱ 6 cm³︱ 50 x 3,31 mm︱ Ø 1”1/4 mm︱ Ø 50 x 2,5 mm︱ 40 x 40 x 4 mm︱ 25 x 50 x 6 mm︱ 50 x 25 x 2,7 mm︱ 60 mm︱ 200 mm︱ 20 mm︱
          With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            29300 €
            594.79 €
            50 mm
            4000 mm
            950 mm
            1250 mm
            430 kg
            6 cm³
            50 x 3,31 mm
            Ø 1”1/4 mm
            Ø 50 x 2,5 mm
            40 x 40 x 4 mm
            25 x 50 x 6 mm
            50 x 25 x 2,7 mm
            60 mm
            200 mm
            20 mm
            Description :
            With mandrel 3 m length
            Can be used with or withoud mandrel
            Two bending speeds
            Programmable bend sequencing and mandrel retraction
            Independent clamp and pressure die adjustment
            Micrometer wiper die adjustment
            Auxiliary system for stabilizing the hydraulic slide pressure
            Quick tool change system
            With pneumatic material clamping and DRO system for linear and rotational positioning

            ALTERNATIVELY:
            model with mandrel 6 m length price on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Megabender MG 030 PT A3/H76

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1075 · Mandrel tube bending machine

          ERCOLINA - Megabender MG 030 PT A3/H76 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 35300 €︱ 716.59 €︱ 64 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 850 kg︱ 10 cm³︱ 64 x 3,3 mm︱ 2" mm︱ 60,3 x 2,2 mm︱ 60 x 60 x 2 mm︱ 40 x 60 x 4 mm︱ 60 x 40 x 3 mm︱ 76 mm︱ 200 mm︱ 20 mm︱
          with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            35300 €
            716.59 €
            64 mm
            4000 mm
            950 mm
            1250 mm
            850 kg
            10 cm³
            64 x 3,3 mm
            2" mm
            60,3 x 2,2 mm
            60 x 60 x 2 mm
            40 x 60 x 4 mm
            60 x 40 x 3 mm
            76 mm
            200 mm
            20 mm
            Description :
            with mandrel 3 m length
            FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide
            Programmable C-axis bending
            Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops
            Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu
            30 programs of 9 bends each can be memorized
            Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)
            External pressure gauges for easy setting of the system and closing pressure
            Variable bending speed up to 4 rpm (Inverter versions)
            Pneumatic chuck

            ALTERNATIVELY:
            model with mandrel length 1,5 / 4 / 6 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact

          Vessel Turning Unit

          used Sheet metal working / shaeres / bending Vessel Turning Unit Dumeta D-CHGK-5

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7295 · Vessel Turning Unit

          Dumeta - D-CHGK-5 - - NEU -

          Technical details
          weight max. 5,0 t︱workpiece diameter 100 - 2500 mm︱total power requirement 2 x 0,37 kW︱load capacity drive unit max. 2500 kg︱load capacity rotating unit max. 2500 kg︱table turning speeds 100 - 1000 mm/min︱diameter of running wheel 250 x 140 mm︱weight of the machine ca. 0,9 t︱
          Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)
            weight max. 5,0 t
            workpiece diameter 100 - 2500 mm
            total power requirement 2 x 0,37 kW
            load capacity drive unit max. 2500 kg
            load capacity rotating unit max. 2500 kg
            table turning speeds 100 - 1000 mm/min
            diameter of running wheel 250 x 140 mm
            weight of the machine ca. 0,9 t
            Description :
            Incl. double foot pedal (start-stop / left-right)
            Incl. remote control (on the cable)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit Schweisskraft Automa 2000 SR Power 1200 M+F

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2450011 · Vessel Turning Unit

          Schweisskraft - Automa 2000 SR Power 1200 M+F - - NEU -

          Technical details
          weight max. 1200 kg︱workpiece diameter 20 - 800 mm︱total power requirement 0,75 kW︱traversing speed 80 - 1600 mm/min︱weight of the machine ca. 56 kg︱range L-W-H 520 x 470 x 390 mm︱
          - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears
            weight max. 1200 kg
            workpiece diameter 20 - 800 mm
            total power requirement 0,75 kW
            traversing speed 80 - 1600 mm/min
            weight of the machine ca. 56 kg
            range L-W-H 520 x 470 x 390 mm
            Description :
            - For machining cylindrical workpieces
            - Flat frame
            - Castors with polyurethane coating
            - Clear controls
            - Infinitely variable speed
            - The control electronics are of a robust and closed housing
            protected
            - With foot switch for start/stop
            - Drive with DC electric motors and gears


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit Dumeta D-HGZ-5

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6534 · Vessel Turning Unit

          Dumeta - D-HGZ-5 - - NEU -

          Technical details
          weight max. 5,0 t︱workpiece diameter 250 - 2500 mm︱total power requirement 0,75 kW︱load capacity drive unit max. 2500 kg︱load capacity rotating unit max. 2500 kg︱weight of the machine ca. 0,9 t︱
          The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control
            weight max. 5,0 t
            workpiece diameter 250 - 2500 mm
            total power requirement 0,75 kW
            load capacity drive unit max. 2500 kg
            load capacity rotating unit max. 2500 kg
            weight of the machine ca. 0,9 t
            Description :
            The self-adjusting D-HGZ roller blocks adapt to the different
            Diameters of your workpieces yourself. This roller block is for special
            designed for heavy-duty activities. Furthermore, this roller block is for
            Suitable for thin-walled workpieces, as the four wheels per unit are an improved
            Supply pressure distribution. || Features: | - Electronic components of
            Top quality | - Infinitely adjustable speed of the drive unit | -
            Wheels fitted with solid rubber tires enclosed in one
            Steel construction | - Heavy construction enables very high stability. | -
            Favorable price-performance ratio enables quick recovery
            Your investment. | - The D-HGZ series is supplied as a standard version and
            includes a remote control with digital reading. || Accessories: | - double
            Foot pedal (start-stop / left-right) | - remote control


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit DUMETA D-TLRS-5 SET

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2450013 · Vessel Turning Unit

          DUMETA - D-TLRS-5 SET - - NEU -

          Technical details
          weight max. 5000 kg︱workpiece diameter 250 - 2500 mm︱total power requirement 0,75 kW︱table turning speeds 100 - 1000 mm/min︱diameter of running wheel 250 x 140 mm︱weight of the machine ca. 800 kg︱range L-W-H 2200 x 2500 x 800 mm︱
          - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears
            weight max. 5000 kg
            workpiece diameter 250 - 2500 mm
            total power requirement 0,75 kW
            table turning speeds 100 - 1000 mm/min
            diameter of running wheel 250 x 140 mm
            weight of the machine ca. 800 kg
            range L-W-H 2200 x 2500 x 800 mm
            Description :
            - For machining cylindrical workpieces
            - Flat frame
            - Castors with polyurethane coating
            - Clear controls
            - Infinitely variable speed
            - The control electronics are of a robust and closed housing
            protected
            - With foot switch for start/stop
            - Drive with DC electric motors and gears


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit Dumeta D-HGZ-10

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6535 · Vessel Turning Unit

          Dumeta - D-HGZ-10 - - NEU -

          Technical details
          weight max. 10,0 t︱workpiece diameter 320 - 3200 mm︱total power requirement 1,1 kW︱load capacity drive unit max. 5000 kg︱load capacity rotating unit max. 5000 kg︱weight of the machine ca. 1,6 t︱
          The self-adjusting D-HGZ roller blocks adapt to the different diameters of your workpieces yourself. This role block is designed for particularly heavy work. Furthermore, this Roller block suitable for thin-walled workpieces, as the four wheels per unit deliver improved pressure distribution. Characteristics: - Top quality electronic components - Infinitely variable speed of the drive unit - Wheels fitted with solid rubber tires enclosed in one steel construction - Heavy construction enables very high stability. - Good value for money allows for quick recovery your investment. - The D-HGZ range is supplied as a standard version and includes a Remote control with digital reading. Accesories: - Double foot pedal (start-stop/left-right) - Remote control (on the cable
            weight max. 10,0 t
            workpiece diameter 320 - 3200 mm
            total power requirement 1,1 kW
            load capacity drive unit max. 5000 kg
            load capacity rotating unit max. 5000 kg
            weight of the machine ca. 1,6 t
            Description :
            The self-adjusting D-HGZ roller blocks adapt to the
            different diameters of your workpieces yourself. This role block is
            designed for particularly heavy work. Furthermore, this
            Roller block suitable for thin-walled workpieces, as the four wheels per unit
            deliver improved pressure distribution.

            Characteristics:
            - Top quality electronic components
            - Infinitely variable speed of the drive unit
            - Wheels fitted with solid rubber tires enclosed in one
            steel construction
            - Heavy construction enables very high stability.
            - Good value for money allows for quick recovery
            your investment.
            - The D-HGZ range is supplied as a standard version and includes a
            Remote control with digital reading.

            Accesories:
            - Double foot pedal (start-stop/left-right)
            - Remote control (on the cable


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING KTS - 80

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006004 · Vessel Turning Unit

          WELDING - KTS - 80 - - 2022 -

          Technical details
          weight max. 80 t︱workpiece diameter 500 - 6000 mm︱Turning speed 70 - 1200 mm/min︱roll diameter 400 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 2,5 x 1,5 x 1,0 m︱
          • unused vessel turning unit, • with steel rolls, manual adjustable roller-spacing, • one device with twin drive with variable adjustable rotational speed
            weight max. 80 t
            workpiece diameter 500 - 6000 mm
            Turning speed 70 - 1200 mm/min
            roll diameter 400 mm
            dimensions of the machine ca. 2,5 x 1,5 x 1,0 m
            Description :
            • unused vessel turning unit,
            • with steel rolls, manual adjustable roller-spacing,
            • one device with twin drive with variable adjustable rotational speed


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING KTS - 30

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006010 · Vessel Turning Unit

          WELDING - KTS - 30 - - 2022 -

          Technical details
          weight max. 30 t︱workpiece diameter 300 - 3600 mm︱Turning speed 70 - 1200 mm/min︱roll diameter 400 mm︱Wheel width 115/200 mm︱total power requirement 2 x 0,75 kW︱weight of the machine ca. t︱dimensions of the machine ca. 2,5 x 1,5 x 1,0 m︱
          • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive.
            weight max. 30 t
            workpiece diameter 300 - 3600 mm
            Turning speed 70 - 1200 mm/min
            roll diameter 400 mm
            Wheel width 115/200 mm
            total power requirement 2 x 0,75 kW
            dimensions of the machine ca. 2,5 x 1,5 x 1,0 m
            Description :
            • unused vessel turning unit,
            • with steel rolls, manual adjustable roller spacing,
            • one roller unit with twin drive with variable adjustable rotational speed,
            • one roller unit without drive.



        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING KTS - 5

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006033 · Vessel Turning Unit

          WELDING - KTS - 5 - - 2022 -

          Technical details
          weight max. 5 t︱workpiece diameter 150 - 1800 mm︱Turning speed 70 - 1200 mm/min︱roll diameter 250 mm︱total power requirement 1 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,8 x 1,5 x 1,0 m︱
          • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking
            weight max. 5 t
            workpiece diameter 150 - 1800 mm
            Turning speed 70 - 1200 mm/min
            roll diameter 250 mm
            total power requirement 1 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 1,8 x 1,5 x 1,0 m
            Description :
            • demonstration unit
            • unused vessel turning unit,
            • with rubberised rolls, manual adjustable roller-spacing,
            • one device with twin drive with adjustable rotational speed.
            • with CE marking


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING KTS - 3

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006032 · Vessel Turning Unit

          WELDING - KTS - 3 - - 2022 -

          Technical details
          weight max. 3 t︱workpiece diameter 120 - 1500 mm︱Turning speed 0,6 - 1000 mm/min︱roll diameter 250 mm︱total power requirement 0,5 kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 1,4 x 1,5 x 1,0 m︱
          • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed.
            weight max. 3 t
            workpiece diameter 120 - 1500 mm
            Turning speed 0,6 - 1000 mm/min
            roll diameter 250 mm
            total power requirement 0,5 kW
            weight of the machine ca. 0,6 t
            dimensions of the machine ca. 1,4 x 1,5 x 1,0 m
            Description :
            • demonstration unit
            • unused vessel turning unit,
            • with rubberised rolls, manual adjustable roller-spacing,
            • one device with twin drive with adjustable rotational speed.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING KTS - 20

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006060 · Vessel Turning Unit

          WELDING - KTS - 20 - - 2022 -

          Technical details
          weight max. 20 t︱workpiece diameter 300 - 3600 mm︱Turning speed 70 - 1200 mm/min︱roll diameter 350 mm︱Wheel width 110/175 mm︱total power requirement 3 kW︱weight of the machine ca. t︱dimensions of the machine ca. 2,5 x 1,5 x 1,0 m︱
          • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking
            weight max. 20 t
            workpiece diameter 300 - 3600 mm
            Turning speed 70 - 1200 mm/min
            roll diameter 350 mm
            Wheel width 110/175 mm
            total power requirement 3 kW
            dimensions of the machine ca. 2,5 x 1,5 x 1,0 m
            Description :
            • demonstration unit
            • unused vessel turning unit,
            • with steel rolls, manual adjustable roller spacing,
            • one roller unit with twin drive with variable adjustable rotational speed,
            • one roller unit without drive.
            • CE-marking


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING KTS - 10

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006003 · Vessel Turning Unit

          WELDING - KTS - 10 - - 2022 -

          Technical details
          weight max. 10 t︱workpiece diameter 150 - 2300 mm︱Turning speed 70 - 1200 mm/min︱roll diameter 300 mm︱Wheel width 100/150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 1,8 x 1,5 x 1,0 m︱
          • unused vessel turning unit, • with rubberised rolls, • manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • Import device, with CE marking
            weight max. 10 t
            workpiece diameter 150 - 2300 mm
            Turning speed 70 - 1200 mm/min
            roll diameter 300 mm
            Wheel width 100/150 mm
            dimensions of the machine ca. 1,8 x 1,5 x 1,0 m
            Description :
            • unused vessel turning unit,
            • with rubberised rolls,
            • manual adjustable roller-spacing,
            • one device with twin drive with adjustable rotational speed.
            • Import device, with CE marking


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit WELDING ZT - 10

          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland
          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006002 · Vessel Turning Unit

          WELDING - ZT - 10 - - 2019 -

          Technical details
          weight max. 10 t︱workpiece diameter 300 - 3300 mm︱Turning speed 70 - 1200 mm/min︱roll diameter 300 mm︱Wheel width 105 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 1,8 x 1,5 x 1,0 m︱
          • unused vessel turning unit, • with rubberised double-rolls, self-adjustable diameter of the vessel, • one device with twin drive, variable adjustable rotational speed. • one device as follower with CE-identification mark
            weight max. 10 t
            workpiece diameter 300 - 3300 mm
            Turning speed 70 - 1200 mm/min
            roll diameter 300 mm
            Wheel width 105 mm
            dimensions of the machine ca. 1,8 x 1,5 x 1,0 m
            Description :
            • unused vessel turning unit,
            • with rubberised double-rolls, self-adjustable diameter of the vessel,
            • one device with twin drive, variable adjustable rotational speed.
            • one device as follower
            with CE-identification mark


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit JWelding KTS-10

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-L152 · Vessel Turning Unit

          JWelding - KTS-10 - - 2018 -

          Technical details
          Capacity 10000 kg︱Roll diameter 300 mm ø︱Max. workpiece diameter 3200 mm ø︱Min. workpiece diameter 300 mm ø︱Variable speed 100 - 1000 mm/min︱Workpiece weight 2 x 0,37 kg︱
            Capacity 10000 kg
            Roll diameter 300 mm ø
            Max. workpiece diameter 3200 mm ø
            Min. workpiece diameter 300 mm ø
            Variable speed 100 - 1000 mm/min
            Workpiece weight 2 x 0,37 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit KRUPS A8

          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland
          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06584 · Vessel Turning Unit

          KRUPS - A8 - - 1990 -

          Technical details
          weight max. 8 t︱foot operation ja ︱ ︱
            weight max. 8 t
            foot operation ja


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit UWM 2200

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-73106 · Vessel Turning Unit

          UWM - 2200 - - -Neu- -

          Technical details
          weight max. 2,2 t︱workpiece diameter 101 - 1524 mm︱feed speeds infinitely variable 0 - 3600 mm/min︱gear diameter 254 mm︱gear width 76 mm︱total power requirement 0,5 kW︱weight of the machine ca. 0,245 t︱dimensions of the machine ca. 1,02 x 0,82 x 0,5 m︱
            weight max. 2,2 t
            workpiece diameter 101 - 1524 mm
            feed speeds infinitely variable 0 - 3600 mm/min
            gear diameter 254 mm
            gear width 76 mm
            total power requirement 0,5 kW
            weight of the machine ca. 0,245 t
            dimensions of the machine ca. 1,02 x 0,82 x 0,5 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Vessel Turning Unit DUMETA D-TLRS-10-D

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-73121 · Vessel Turning Unit

          DUMETA - D-TLRS-10-D - - -Neu- -

          Technical details
          weight max. 10 t︱workpiece diameter 320 - 3200 mm︱drum diameter 300 x 120 mm︱feed 100 - 1000 mm/min︱total power requirement 1,1 kW︱
            weight max. 10 t
            workpiece diameter 320 - 3200 mm
            drum diameter 300 x 120 mm
            feed 100 - 1000 mm/min
            total power requirement 1,1 kW


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   
            •
          TOP Manufacturer:

          DUMETA - JWELDING - WELDING - UWM - MPK - A+B - NN - - SICES - WMT -

          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені