Indexing Device

4 STK︱weight 1250 kg︱dimensions 1,2 x 0,85 x 2,0 m︱

---

max. load 240000 N︱ 220 x 150 x 95 mm︱weight 11,5 kg︱screw diameter M 24 ︱

---

12 pieces in stock, without threaded screw, Photo is a brochure picture ! Unit price € 80,-

max. load 120 000 N︱ 178 x 120 x 75 mm︱weight 5,5 kg︱screw diameter M20 ︱

---

16 pieces in stock, without threaded screw, Photo is a brochure picture ! Unit price € 70,-

max. load 60 to︱dimensions 330 x 225 x 166 mm︱weight 28 kg︱

---

42 pcs. of levelling elements for floor-plates - with ball-adjusting disc for non-angular surfaces - with fixation and height-adjustmet bolt - with possibility of fixation to the foundation by means of 2 lateral foundation bolts (not included) - height of adjustment bolt 380 mm, M 36 x 1,5, SW 30

max. load - kg︱ - ︱weight - kg︱

---

10 off used machine shoes.

centre height 130 mm︱spindle bore 18 mm︱ratio 40:1 ︱swivellable - 10° bis 90° °︱groove width 16 / 18 mm︱weight 35 kg︱dimensions of the machine ca. 0,5 x 0,25 x 0,25 m︱

---

Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

centre height 160 mm︱chucking diameter 200 mm︱hollow 54 mm︱

---

/ ︱weight 295 kg︱

---

Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Height: 280mm Weight: 110kg

/ ︱weight 295 kg︱

---

Center height: approx. 265mm dimension Length: about 800mm Width: about 600mm Forkart Chuck F315 Lining passage: 80mm Weight: 295kg

/ ︱weight 140 kg︱

---

dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg

/ ︱weight 75 kg︱

---

Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR

centre height 90 mm︱weight of the machine ca. 65 kg︱dimensions of the machine ca. 600 x 300 x 300 mm︱

---

centre height 160 mm︱weight of the machine ca. 58 kg︱dimensions of the machine ca. 400*350*400 mm︱

---

Teilkopf / Teilapparat Dimension approx. 400 x 350 x 400 Weight approx. 58 kg Faceplate Ø 300 Rotatable 360° /Pivotable -15 / 3°

centre height - mm︱

---

centre height 125 mm︱3-jaw chuck 125 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 0,6x05x0,2 m︱

---

centre height 150 mm︱weight of the machine ca. 85 kg︱dimensions of the machine ca. ? m︱

---

Universal Dividing Head Control: Center-Height 150 mm

centre height 140 mm︱chucking diameter 250 mm︱swivelling range 90 Grad︱weight of the machine ca. 150 kg︱

---

Dividing head swivable of a Heckert FU 400

centre height 390 mm︱passage of steadyrest 220 mm︱chucking diameter 400 mm︱total power requirement / kW︱

---

centre height 250 mm︱total power requirement 0 kW︱weight of the machine ca. 0,250 t︱dimensions of the machine ca. m︱

---

centre height 160 mm︱chucking diameter 160 mm︱indexing 15 °︱groove width 12 mm︱weight 50 kg︱dimensions of the machine ca. 550 x 230 x 200 mm︱

---

- S/N: 1117 - AROWA three-jaw chuck including jaws - indexing every 15°

centre height 76 mm︱centre distance 190 mm︱spindle bore 21 mm︱taper MK 3 ︱weight of the machine ca. 40 kg︱dimensions of the machine ca. 720 x 210 x 215 mm︱collets ︱tailstock ︱dead centres ︱

---

centre height 76 mm︱centre distance 160 mm︱spindle bore 21 mm︱taper MK 3 ︱total power requirement kW︱weight of the machine ca. 20 kg︱dimensions of the machine ca. m︱collets ︱tailstock ︱dead centres ︱

---

centre height / mm︱total power requirement / kW︱weight of the machine ca. / kg︱

---

Make: Peiseler Type: HW710 Diameter: Ø 710mm Weight: approx. 450 kg

centre height 250 mm︱weight of the machine ca. 120 kg︱

---

Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved