Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          ATMH Werkzeugmaschinenhandel GmbH - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe ATMH CST-46160


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1279 · CNC Lathe

          ATMH - CST-46160 - - 2018 - Siemens 828 D

          Technical details
          turning diameter 1270 mm︱turning length 4300 mm︱control Siemens 828 D ︱total power requirement 22/26 kW︱weight of the machine ca. 14,8 t︱dimensions of the machine ca. 8,9 x 3 x 2,75 m︱
          Turning diameter 1270 mm Turning length 4300 mm Control Siemens 828 D Turning diameter over slide rest 880 mm Spindle speeds 1 - 680 rpm Longitudinal feeds: 0.001-500 mm / rev Cross feeds: 0.001-500 mm / rev Spindle passage 153 mm Rapid traverse - longitudinal / flat 10/8 m / min Switching stages 4 Cross slide travel 680 mm Workpiece weight between centers max. 8000 kg Total power requirement 22/26 kW Machine weight approx. 14.8 t Space requirement approx. 8.9 x 3 x 2.75 m Flatbed machine! Machine housing (CE conform), 8 positions Sauter revolver, three-jaw chuck, chip conveyor and Bezel. Control: Siemens 828 D
            turning diameter 1270 mm
            turning length 4300 mm
            control Siemens 828 D
            total power requirement 22/26 kW
            weight of the machine ca. 14,8 t
            dimensions of the machine ca. 8,9 x 3 x 2,75 m
            Description :
            Turning diameter 1270 mm
            Turning length 4300 mm
            Control Siemens 828 D
            Turning diameter over slide rest 880 mm
            Spindle speeds 1 - 680 rpm
            Longitudinal feeds: 0.001-500 mm / rev
            Cross feeds: 0.001-500 mm / rev
            Spindle passage 153 mm
            Rapid traverse - longitudinal / flat 10/8 m / min
            Switching stages 4
            Cross slide travel 680 mm
            Workpiece weight between centers max. 8000 kg
            Total power requirement 22/26 kW
            Machine weight approx. 14.8 t
            Space requirement approx. 8.9 x 3 x 2.75 m

            Flatbed machine! Machine housing (CE
            conform), 8 positions Sauter revolver, three-jaw chuck, chip conveyor and
            Bezel. Control: Siemens 828 D


          Datasheet
          Request / Contact
          used  CNC Lathe BOLEY BDN 160


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36561 · CNC Lathe

          BOLEY - BDN 160 - - 1987 - /

          Technical details
          turning diameter 160 mm︱turning length 400 mm︱control /
            turning diameter 160 mm
            turning length 400 mm
            control /
          Datasheet
          Request / Contact
          used  CNC Lathe BOLEY BDN


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36562 · CNC Lathe

          BOLEY - BDN - - 1985 - /

          Technical details
          turning diameter / mm︱turning length / mm︱control /
            turning diameter / mm
            turning length / mm
            control /
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe WALDRICH-SIEGEN WDS 3000x11000


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1486 · Heavy Duty Lathe

          WALDRICH-SIEGEN - WDS 3000x11000 - - unbekannt -

          Technical details
          Intern No: M14101486 ︱turning diameter over slide rest 2600 mm︱turning length 11000 mm︱turning diameter over bed 3300 mm︱weight of the machine ca. 120 t︱
          Waldrich Siegen WDS 3000x11000 Max turning diameter: 3300 mm Max turning diameter over slide: 2600 mm Max turning length: 11000 mm Number of bed slide: 2 Outer diameter faceplate: 3000 mm Speed ??range: 0.67-55 rpm Workpiece weight between the tops: 45-50 t when using steady rest: 60-70 t Weight: 120 t Equipment: Grinding unit, dust extraction, 3 pieces steady rests On both sliders 4-axis digital display from Heidenhain. Price without tail stock Freight loading on truck A tailstock can be reproduced by us, price on request.
            Intern No: M14101486
            turning diameter over slide rest 2600 mm
            turning length 11000 mm
            turning diameter over bed 3300 mm
            weight of the machine ca. 120 t
            Description :
            Waldrich Siegen
            WDS 3000x11000


            Max turning diameter: 3300 mm
            Max turning diameter over slide: 2600 mm
            Max turning length: 11000 mm
            Number of bed slide: 2
            Outer diameter faceplate: 3000 mm
            Speed ??range: 0.67-55 rpm
            Workpiece weight between the tops: 45-50 t
            when using steady rest: 60-70 t

            Weight: 120 t

            Equipment:
            Grinding unit, dust extraction, 3 pieces steady rests
            On both sliders 4-axis digital display from Heidenhain.

            Price without tail stock

            Freight loading on truck

            A tailstock can be reproduced by us, price on request.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled GORNATI CMG 750 NSXP


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-WA1486 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2x4 m︱
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2x4 m
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic HEID DLZ 560


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1890 · lathe-conventional-electronic

          HEID - DLZ 560 - - 1970 -

          Technical details
          turning diameter 560 mm︱turning length 1000 mm︱centre height 300 mm︱centre distance 1000 mm︱spindle bore 70 mm︱weight of the machine ca. 3000 kg︱dimensions of the machine ca. 3 x 1,4x x 1,4 m︱
          Turning diameter over bed 560 mm Turning diameter over support approx. 350 mm Turning length 1000 mm Center height approx. 300 mm Distance between centers 1000 mm Spindle bore 70 mm Machine weight approx. 3 t Required space approx. 3.0 x 1.4 x 1.4 m
            turning diameter 560 mm
            turning length 1000 mm
            centre height 300 mm
            centre distance 1000 mm
            spindle bore 70 mm
            weight of the machine ca. 3000 kg
            dimensions of the machine ca. 3 x 1,4x x 1,4 m
            Description :
            Turning diameter over bed 560 mm
            Turning diameter over support approx. 350 mm
            Turning length 1000 mm
            Center height approx. 300 mm
            Distance between centers 1000 mm
            Spindle bore 70 mm


            Machine weight approx. 3 t
            Required space approx. 3.0 x 1.4 x 1.4 m


          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column RAFAMET KCF 320 / 350


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS2025 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320 / 350 - - 2000 - Typ 840 D sl

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3500 mm︱turning height 2200 mm︱range L-W-H 7730 x 6240 x 6700 mm︱control Typ 840 D sl ︱voltage 3 x 400 V︱frequency 50 Hz︱turning speeds 0,8 - 40 U/min︱max. turning diameter 3500 mm︱total power requirement 51 kW︱weight of the machine ca. 86 t︱
            faceplate diameter 3200 mm
            swing diameter 3500 mm
            turning height 2200 mm
            range L-W-H 7730 x 6240 x 6700 mm
            control Typ 840 D sl
            voltage 3 x 400 V
            frequency 50 Hz
            turning speeds 0,8 - 40 U/min
            max. turning diameter 3500 mm
            total power requirement 51 kW
            weight of the machine ca. 86 t
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine FLOTT 4 STW


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36567 · Bench Drilling Machine

          FLOTT - 4 STW - - unbekannt -

          Technical details
          bore capacity in steel (diameter) / mm︱throat / mm︱bore stroke 70 mm︱total power requirement 0,9 kW︱
            bore capacity in steel (diameter. / mm
            throat / mm
            bore stroke 70 mm
            total power requirement 0,9 kW
          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C-Vert.

          used  Floor Type Boring and Milling M/C-Vert. JUARISTI M 205 M CNC


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1650 · Floor Type Boring and Milling M/C-Vert.

          JUARISTI - M 205 M CNC - - 1993 -

          Technical details
          x-travel 10.000 mm︱y-travel 2500 mm︱z-travel 1250 mm︱spindle diameter 205 mm︱total power requirement 70 kW︱
          Spindle diameter 205 mm Control Heidenhein TNC 355 Cross travel X 10,000 mm Vertical travel Y 2500 mm Travel Z 1250 mm (spindle) Control Heidenhein TNC 355 Panel fields 2 x 6400 mm x 1875 x 400mm Power 70 kW Plate field number of slots 6 Dimensions of the T-slots 36 x 64 Number of holding holes 18
            x-travel 10.000 mm
            y-travel 2500 mm
            z-travel 1250 mm
            spindle diameter 205 mm
            total power requirement 70 kW
            Description :
            Spindle diameter 205 mm
            Control Heidenhein TNC 355
            Cross travel X 10,000 mm
            Vertical travel Y 2500 mm
            Travel Z 1250 mm (spindle)
            Control Heidenhein TNC 355
            Panel fields 2 x 6400 mm x 1875 x 400mm
            Power 70 kW

            Plate field number of slots 6
            Dimensions of the T-slots 36 x 64
            Number of holding holes 18
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DMG Ultrasonic 20 LINEAR PH 10/100


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1857 · Machining Center - Universal

          DMG - Ultrasonic 20 LINEAR PH 10/100 - - 2011 - Siemens

          Technical details
          x-travel 200 mm︱y-travel 200 mm︱z-travel 280 mm︱turning speeds 40 000 U/min︱Control Siemens
            x-travel 200 mm
            y-travel 200 mm
            z-travel 280 mm
            turning speeds 40 000 U/min
            Control Siemens
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine GILLARDON GB20


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36566 · Pillar Drilling Machine

          GILLARDON - GB20 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) / mm︱throat 150 mm︱bore stroke max. 110 mm︱total power requirement 0,5/0,9 kW︱weight of the machine ca. / t︱
            bore capacity in steel (diameter. / mm
            throat 150 mm
            bore stroke max. 110 mm
            total power requirement 0,5/0,9 kW
            weight of the machine ca. / t
          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine WOTAN WERKE DüSSELDORF


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A2150 · Table Type Boring and Milling Machine

          WOTAN WERKE DüSSELDORF - - - unbekannt -

          Technical details
          spindle diameter / mm︱x-travel / mm︱y-travel / mm︱
          Technical specifications Drilling spindle Parts: 75mm Inner cone: Morse 5 or ISO40 Tool holder notes on the spindle sleeve: 128.57 (ISO 50) Drilling depth in one go: 600 mm (without quick release) 550 mm (with quick release) Vertical adjustment over table: 0 - 800mm Speed ??levels: 20 Speed ??range: 12.5 - 1000 rpm table Clamping area: 800 x 1000 mm Swivel range: 360 ° Cross movement: 800mm Longitudinal movement: 800mm Feeds, rapid traverse and thread Feed levels: 27 Feed range: 0.02 - 8 mm / rev. Rapid traverse: 2.4 m / min Metric thread pitches: 12 Pitch range: 0.5 - 8 mm Drive power: 9 HP Weight without stick: approx. 6000 kg Weight with stick and real bed: 6800kg Dimensions (L x W x H) Machine without a stick: Approx. 3.4 x 1.8 x 2.5 m Machine with stick and action bed: Approx. 3.8 x 1.8 x 2.5 m
            spindle diameter / mm
            x-travel / mm
            y-travel / mm
            Description :
            Technical specifications

            Drilling spindle

            Parts: 75mm
            Inner cone: Morse 5 or ISO40
            Tool holder notes
            on the spindle sleeve: 128.57 (ISO 50)
            Drilling depth in one go: 600 mm (without quick release)
            550 mm (with quick release)
            Vertical adjustment over table: 0 - 800mm
            Speed ??levels: 20
            Speed ??range: 12.5 - 1000 rpm

            table
            Clamping area: 800 x 1000 mm
            Swivel range: 360 °
            Cross movement: 800mm
            Longitudinal movement: 800mm

            Feeds, rapid traverse and thread
            Feed levels: 27
            Feed range: 0.02 - 8 mm / rev.
            Rapid traverse: 2.4 m / min
            Metric thread pitches: 12
            Pitch range: 0.5 - 8 mm

            Drive power: 9 HP
            Weight without stick: approx. 6000 kg
            Weight with stick and real bed: 6800kg

            Dimensions (L x W x H)
            Machine without a stick: Approx. 3.4 x 1.8 x 2.5 m
            Machine with stick and action bed: Approx. 3.8 x 1.8 x 2.5 m
          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine PEGARD PRECIVIT 2


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1979 · Table Type Boring and Milling Machine

          PEGARD - PRECIVIT 2 - - 1978 - Heidenhain TNC430

          Technical details
          spindle diameter 130 mm︱x-travel 5200 mm︱y-travel 2000 mm︱Control Heidenhain TNC430 ︱total power requirement 58 kW︱weight of the machine ca. 38 t︱required space 10,5x9,6x4,9 m︱
          X axis: 5200mm Y axis: 2000mm Z axis (table): 1650mm B axis (table) measuring system resolution 0.0001 ° V axis (tower): 570mm W axis (spindle Ø 130mm): 900mm U axis (facing slide) Spindle Ø 130 max 1250 rpm (SK50) Main spindle motor 58KW Work spindle speed: 16-1250 rpm Faceplate speed: 4-315 rpm Rotary / sliding table LxW: 2200x1800 mm Table load: max 20 t Rapid traverse 6000mm / min Control: Heidenhain TNC430 (retrofit) Additional angle milling head SK40 (diagonal) Including chip conveyor long and cross
            spindle diameter 130 mm
            x-travel 5200 mm
            y-travel 2000 mm
            Control Heidenhain TNC430
            total power requirement 58 kW
            weight of the machine ca. 38 t
            required space 10,5x9,6x4,9 m
            Description :
            X axis: 5200mm
            Y axis: 2000mm
            Z axis (table): 1650mm
            B axis (table) measuring system resolution 0.0001 °
            V axis (tower): 570mm
            W axis (spindle Ø 130mm): 900mm

            U axis (facing slide)
            Spindle Ø 130 max 1250 rpm (SK50)
            Main spindle motor 58KW
            Work spindle speed: 16-1250 rpm
            Faceplate speed: 4-315 rpm
            Rotary / sliding table LxW: 2200x1800 mm
            Table load: max 20 t
            Rapid traverse 6000mm / min
            Control: Heidenhain TNC430 (retrofit)
            Additional angle milling head SK40 (diagonal)
            Including chip conveyor long and cross
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used  Upright Drilling Machine REXON RDM 80 B


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS1512 · Upright Drilling Machine

          REXON - RDM 80 B - - -

          Technical details
          bore capacity in steel (diameter) 20 mm︱turning speeds Max. 2580 U/min︱tool adaptor MK2 ︱weight of the machine ca. 0,05 t︱
            bore capacity in steel (diameter. 20 mm
            turning speeds Max. 2580 U/min
            tool adaptor MK2
            weight of the machine ca. 0,05 t
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal BUTLER ELGAMILL


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1858 · Bed Type Milling Machine - Universal

          BUTLER - ELGAMILL - - 1990 - /

          Technical details
          x-travel 8200 mm︱y-travel 1670 mm︱z-travel 1050 mm︱control / ︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱
          • Year of construction: 1990 • Bed length: 10 m • Longitudinal run (X-axis): 8,200 mm • Vertical run (Y-axis): 1,170 or 1,670 mm • Headstock run (Z-axis): 1,050 mm • Table length: 10,000 mm increasing by 1,000 mm each time • Table width: 1,030 mm • Table height: 765 mm • Spindle motor: 22 or 30 kW • Spindle nose cone: ISO No. 50 • Spindle speeds: infinitely variable up to 3000 rpm • Control type: Heidenhain 355 with 4th axis - see photos - Attention, the mounted magnets and vices are not included in the scope of delivery.
            x-travel 8200 mm
            y-travel 1670 mm
            z-travel 1050 mm
            control /
            total power requirement / kW
            weight of the machine ca. / t
            dimensions of the machine ca. / m
            Description :
            • Year of construction: 1990
            • Bed length: 10 m
            • Longitudinal run (X-axis): 8,200 mm
            • Vertical run (Y-axis): 1,170 or 1,670 mm
            • Headstock run (Z-axis): 1,050 mm
            • Table length: 10,000 mm
            increasing by 1,000 mm each time
            • Table width: 1,030 mm
            • Table height: 765 mm
            • Spindle motor: 22 or 30 kW
            • Spindle nose cone: ISO No. 50
            • Spindle speeds: infinitely variable up to 3000 rpm
            • Control type: Heidenhain 355
            with 4th axis - see photos -
            Attention, the mounted magnets and vices are not included in the scope of
            delivery.
          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Universal BUTLER-NEWALL LE 5


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A15006 · Bed Type Milling Machine - Universal

          BUTLER-NEWALL - LE 5 - - 1989 -

          Technical details
          x-travel 8000 mm︱y-travel 2000 mm︱z-travel 1050 mm︱total power requirement 30 kW︱weight of the machine ca. / t︱
            x-travel 8000 mm
            y-travel 2000 mm
            z-travel 1050 mm
            total power requirement 30 kW
            weight of the machine ca. / t
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Vertical

          used  Bed Type Milling Machine - Vertical ZAYER 8000CM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1817 · Bed Type Milling Machine - Vertical

          ZAYER - 8000CM - - unbekannt -

          Technical details
          x-travel 8000 mm︱y-travel 1500 mm︱z-travel 2000 mm︱spindle taper ISO 50
          X-axis: 8000 mm Y-axis: 1500 mm Z-axis: 2000 mm Spindle mount: ISO 50 For more data see pictures The machine is sold without a table. Optionally we offer a clamping table L: 10000 mm x W: 2000 mm.
            x-travel 8000 mm
            y-travel 1500 mm
            z-travel 2000 mm
            spindle taper ISO 50
            Description :
            X-axis: 8000 mm
            Y-axis: 1500 mm
            Z-axis: 2000 mm
            Spindle mount: ISO 50

            For more data see pictures

            The machine is sold without a table.
            Optionally we offer a clamping table L: 10000 mm x W: 2000 mm.
          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Vertical MECOF CS 103


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1814 · Bed Type Milling Machine - Vertical

          MECOF - CS 103 - - 1989 -

          Technical details
          x-travel 3250 mm︱y-travel 1675 mm︱z-travel 950 mm︱
          MECOF CS 103 Year of construction: 1989/2008 Technical specifications: Travels: X axis: 3250mm Y axis: 1675mm Z axis: 950mm Table: 5000x1100mm Spindle: 1800 rpm (SK50) Rapid traverse 6000mm / min Control: Heidenhain TNC426 (retrofit - 2008)
            x-travel 3250 mm
            y-travel 1675 mm
            z-travel 950 mm
            Description :
            MECOF CS 103
            Year of construction: 1989/2008
            Technical specifications:
            Travels:
            X axis: 3250mm
            Y axis: 1675mm
            Z axis: 950mm
            Table: 5000x1100mm
            Spindle: 1800 rpm (SK50)
            Rapid traverse 6000mm / min
            Control: Heidenhain TNC426 (retrofit -
            2008)
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal DECKEL-MAHO DMU 60 T


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-10163 · milling machining centers - universal

          DECKEL-MAHO - DMU 60 T - - 2000 -

          Technical details
          x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱turning speeds 12.000 U/min︱feed speeds 20-10.000 mm/min︱table surface area 1000x600 mm︱spindle taper SK40 ︱condition Gut Gebraucht ︱range L-W-H 500 x 200 x200 mm︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. m︱
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            turning speeds 12.000 U/min
            feed speeds 20-10.000 mm/min
            table surface area 1000x600 mm
            spindle taper SK40
            condition Gut Gebraucht
            range L-W-H 500 x 200 x200 mm
            weight of the machine ca. 6,5 t
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical SPINNER VC560


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A2031 · milling machining centers - vertical

          SPINNER - VC560 - - 2007 -

          Technical details
          x-travel 560 mm︱y-travel 410 mm︱z-travel 410 mm︱weight of the machine ca. ca. 5 t︱
          Year of construction: 2007 Control: Siemens SINUMERIK 840D Shop MILL X-way: 560 mm Y-way: 410 mm Z-way: 410 mm Feed - 30000 mm / min Rapid traverse - 48 m / min Recording: SK40 Spindle speed: 12000 rpm Magazine: 24 narzedzi Machine weight: approx. 5000 kg Incl. IKZ with belt filter system
            x-travel 560 mm
            y-travel 410 mm
            z-travel 410 mm
            weight of the machine ca. ca. 5 t
            Description :
            Year of construction: 2007
            Control: Siemens SINUMERIK 840D Shop MILL
            X-way: 560 mm
            Y-way: 410 mm
            Z-way: 410 mm
            Feed - 30000 mm / min
            Rapid traverse - 48 m / min
            Recording: SK40
            Spindle speed: 12000 rpm
            Magazine: 24 narzedzi
            Machine weight: approx. 5000 kg

            Incl. IKZ with belt filter system
          Datasheet
          Request / Contact
          used  milling machining centers - vertical DECKEL MAHO DMU 100 T


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS1568 · milling machining centers - vertical

          DECKEL MAHO - DMU 100 T - - 2003 - CNC - iTNC 530

          Technical details
          x-travel 1080 mm︱y-travel 710 mm︱z-travel 710 mm︱Control CNC - iTNC 530 ︱total power requirement 26 kW︱weight of the machine ca. 12 t︱
            x-travel 1080 mm
            y-travel 710 mm
            z-travel 710 mm
            Control CNC - iTNC 530
            total power requirement 26 kW
            weight of the machine ca. 12 t
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column EIMA FP 42


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1437 · Planer-Type Milling M/C - Double Column

          EIMA - FP 42 - - 1999 - CNC

          Technical details
          x-travel 4927 mm︱y-travel 2871 mm︱z-travel 1083 mm︱Control CNC ︱turning speeds 600-18.000 U/min︱total power requirement / kW︱weight of the machine ca. / t︱
            x-travel 4927 mm
            y-travel 2871 mm
            z-travel 1083 mm
            Control CNC
            turning speeds 600-18.000 U/min
            total power requirement / kW
            weight of the machine ca. / t
          Datasheet
          Request / Contact

          Cold Rolling Machine

          used  Cold Rolling Machine WUXI TONGDA 4-Walzen-Kaltwalzwerk


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36550 · Cold Rolling Machine

          WUXI TONGDA - 4-Walzen-Kaltwalzwerk - - 2007 -

          Technical details
          Press force max.: 3000 kN︱roll speed 28 m/min︱working width 700 mm︱
          4-roll cold rolling mill 1.6 x 2.0 x 3.0 m (LxWxH) Manufacturer: Unknown Year of manufacture: 2007 2 work rolls Ø 180 / Ø 520 x 800 mm (9Cr2Mo) 2 support rollers Working width: max. 700 mm processed materials: steel / stainless steel materials (max. 3 mm) including roller drive 3.0 x 4.7 x 2.4 m (LxWxH) including decoiler 2.0 x 0.8 x 1.2 m (LxWxH) incl. coiler 3.3 x 1.5 x 1.5 m (LxWxH) including control panel and control panel Technical specifications: 1. Processed material: AISI304 fabric 2. Output thickness: 1.3mm, output width: =700mm 3. Finished product thickness: 0.5mm Finished product width: =700mm (tolerance of the finished product thickness =0.03mm) 4. Rolling speed: V=28m / min 5. Press force: P = 3000KN (300T) .The construction of equipment Main plants: 4) 180 / 40520x800 four roll calender cold rolling mill 1. Employment devices: A. Employment engine: Type: YZ-2-6 Output: 15KWx2, approach speed: 0.05nun / s; B. Engaging and lifting can be simultaneous, and can also be separate; C. double-enveloping worm gearing, D. Worm gear with holier speed: WS210, material: ZG270-500 E. Adjustment screw: B180x8mm, material: 40Cr F. Control box is made of ZG270-500 G. Mounting distance to center: 315mm 2. Main gear: A. Type of drive: Drive with support rollers B. Main motor: Type: Y355L1-180KW-6, n = 980r / min, 440V C. Main gear: ZL-1150, i = 45 D. Gear with arrow wheels (steel part): A = 900rnm, module M = 14, E. Type of gear shaft: cross universal connection SWC285 3. Scaffolding: A. Closed memorial arches, cross-section of the column: 300mm x 380mm B. Material of the memorial sheet: ZG35 C. All foundation bolts D. The surface of the window of memorial arches through handy work E. The pressure plate for positioning in the direction of the filer roller system F. Guiding system for the entrance and exit of the calender 4. Roller system: A. Work roll diameter x work roll width: 180 x 800mm; Material: 9Cr2Mo work roll is ground 0.03mm. Surface hardness: HRC60-62; Surface Ra: 0.8, thickness of the surface layer 6mm. Bearing: inner ring is rolling bearing. B. Diameter of the back-up roll x width of the back-up roll: 520 x 800mm; Material: 9Cr2Mo Surface hardness: HRC58-60; Surface Ra: 0.8, surface layer thickness 10mm Bearing: FC6084300 Hydraulic station (1 set) 200L, system pressure: 6.3Mpa; pump: 7.5KW
            Press force max.: 3000 kN
            roll speed 28 m/min
            working width 700 mm
            Description :
            4-roll cold rolling mill 1.6 x 2.0 x 3.0 m (LxWxH)

            Manufacturer: Unknown
            Year of manufacture: 2007

            2 work rolls Ø 180 / Ø 520 x 800 mm (9Cr2Mo)
            2 support rollers
            Working width: max. 700 mm
            processed materials: steel / stainless steel materials (max. 3 mm)
            including roller drive 3.0 x 4.7 x 2.4 m (LxWxH)


            including decoiler 2.0 x 0.8 x 1.2 m (LxWxH)
            incl. coiler 3.3 x 1.5 x 1.5 m (LxWxH)
            including control panel and control panel


            Technical specifications:
            1. Processed material: AISI304 fabric
            2. Output thickness: 1.3mm, output width: =700mm
            3. Finished product thickness: 0.5mm Finished product width: =700mm (tolerance
            of the finished product thickness =0.03mm)
            4. Rolling speed: V=28m / min
            5. Press force: P = 3000KN (300T)
            .The construction of equipment
            Main plants: 4) 180 / 40520x800 four roll calender cold rolling mill
            1. Employment devices:
            A. Employment engine:
            Type: YZ-2-6 Output: 15KWx2, approach speed: 0.05nun / s;
            B. Engaging and lifting can be simultaneous, and can also be separate;
            C. double-enveloping worm gearing,
            D. Worm gear with holier speed: WS210, material: ZG270-500
            E. Adjustment screw: B180x8mm, material: 40Cr
            F. Control box is made of ZG270-500
            G. Mounting distance to center: 315mm

            2. Main gear:
            A. Type of drive: Drive with support rollers
            B. Main motor: Type: Y355L1-180KW-6, n = 980r / min, 440V
            C. Main gear: ZL-1150, i = 45
            D. Gear with arrow wheels (steel part): A = 900rnm, module M = 14,
            E. Type of gear shaft: cross universal connection SWC285

            3. Scaffolding:
            A. Closed memorial arches, cross-section of the column: 300mm x 380mm
            B. Material of the memorial sheet: ZG35
            C. All foundation bolts
            D. The surface of the window of memorial arches through handy work E. The
            pressure plate for positioning in the direction of the filer roller system
            F. Guiding system for the entrance and exit of the calender

            4. Roller system:
            A. Work roll diameter x work roll width: 180 x 800mm; Material: 9Cr2Mo work
            roll is ground 0.03mm.
            Surface hardness: HRC60-62;
            Surface Ra: 0.8, thickness of the surface layer 6mm. Bearing: inner ring is
            rolling bearing.
            B. Diameter of the back-up roll x width of the back-up roll: 520 x 800mm;
            Material: 9Cr2Mo Surface hardness: HRC58-60;
            Surface Ra: 0.8, surface layer thickness 10mm
            Bearing: FC6084300

            Hydraulic station
            (1 set) 200L, system pressure: 6.3Mpa; pump: 7.5KW
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical LIEBHERR ET 1500


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1111 · Gear Hobbing Machine - Vertical

          LIEBHERR - ET 1500 - - 1973 -

          Technical details
          max. wheel diameter 1500 mm︱gear width 280 mm︱max. module 14 ︱min. module 1 ︱total power requirement 86 kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          The machine is an internal gear machine and works in the single-part process. Machine was completely overhauled in 2007! The machine is in a soundproof booth. Jia9vzj Very little busy after the renovation Machine is helped with change gears and accessories. Technical details / accessories / additional: Wheel diameter - max. 1500 mm Wheel width 280 mm Module - max. 14 Module - min. 1 Table diameter 1400 mm Total power requirement 86 kW Machine weight approx. 15 t Space requirement approx. 4 x 2.4 x 2.4 m
            max. wheel diameter 1500 mm
            gear width 280 mm
            max. module 14
            min. module 1
            total power requirement 86 kW
            weight of the machine ca. 15 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            The machine is an internal gear machine and works in the single-part process.

            Machine was completely overhauled in 2007! The machine is in a soundproof booth.
            Jia9vzj
            Very little busy after the renovation
            Machine is helped with change gears and accessories.

            Technical details / accessories / additional:
            Wheel diameter - max. 1500 mm
            Wheel width 280 mm
            Module - max. 14
            Module - min. 1
            Table diameter 1400 mm
            Total power requirement 86 kW
            Machine weight approx. 15 t
            Space requirement approx. 4 x 2.4 x 2.4 m


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Atmh Werkzeugmaschinenhandel GmbH   58256 Ennepetal Scharpenbergerstr.96-98 Deutschland
          Atmh Werkzeugmaschinenhandel GmbH

          Scharpenbergerstr.96-98



          Contact Trader


            Atmh Werkzeugmaschinenhandel GmbH
           Scharpenbergerstr.96-98
            58256 Ennepetal
            Deutschland
            +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
            info@atmh.de
            www.atmh.de
            Contact person:

           




          Machine category


          · 3D Universal Messmaschine · Abgratpresse · Abkantpresse - hydraulisch · Abkantwerkzeuge · Absauganlage · Anreißplatte · Aufspannplatte · Aufspanntisch · Aufspannwinkel · Aufspannwürfel · Ausdrehkopf · Ausdrehsupport · Ausklinkmaschine · Bandsäge · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Blechbearbeitungszentrum · Bohrer · Bohrwerkstisch · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bördelmaschine · CNC Drehmaschine · Coil - Wende - Einrichtung · Diverses Zubehör · Doppelschleifbock · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Elektronik / SPS-Steuerungen · Endenbearbeitungsmaschine · Entmagnetisierapparat · Exzenterpressen - Einständer · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Fräs- und Drehwerkzeuge · Fräskopf senkrecht · Futter · Handspindelpresse · Honmaschine - Außen - Horizontal · Hubtische · Hydraulische Presse · Härteanlage - Gas · Industriesauger · Innenschleifmaschine · Kaltwalzmaschine · Karusselldrehmaschine - Doppelständer · Kettenzug - elektrisch · Kettenzug - von Hand · Kombinierte - Profilstahlschere · Kompressoren · Koordinatenmeßmaschine · Krananlage · Krananlagen · Krantraverse · Kreissäge - Automatisch · Kugellager · Kühlmittelpumpe · Lichtschranke · Luftgesenkhammer · Lynette · Längs- und Querteilanlage · Magnetförderband · Magnetspannplatte · Messerkopf · Messmaschine · Messplatte · Meßmittel · Motor · Planscheibe · Plattenbohrwerk - Vertikal · Portalfräsmaschine · Profil- Ring- Biegemaschine · Querteilanlage · Regalsysteme · Reinigungsanlage · Reitstock · Richtmaschine · Richtpresse - Doppelständer · Richtpresse - Einständer · Rohrausschleifer · Rollenbock · Rundschleifmaschine · Rundtisch - Schwenkbar · Schnellwechsel Stahlhalter · Schrauben Kompressor · Schraubstock · Schweißkantenabschrägmaschine · Schweißmaschine - Rundnaht · Schweißmaschine Längsnaht u. Rundnaht · Schweißplatte · Schweißtisch · Schwenkbiegemaschine · Schwerdrehmaschine · Senkerodiermaschine · Sonstige · Sonstige Geräte und Zubehör · Spanngerät · Spannmittel · Spindelpresse · Späneförderer · Stanzautomat-Doppelständer · Ständerbohrmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Teilapparat · Tieflochbohrmaschine · Tischbohrmaschine · Tischbohrwerk · Transformator · Transportwagen · Waage · Wendeplattenfräser · Werkbänke · Werkzeug Voreinstellgerät · Werkzeughalter · Werkzeughalter (angetrieben) · Werkzeugschränke · Werkzeugwagen · Werkzeugwechselwagen · Winkeltisch · Zahnrad-Abwälzfräsmaschine - vertikal · Zentrierspitze ·