Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Punching Press

          used  Punching Press KINGSLAND 70P 625


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34120 · Punching Press

          KINGSLAND - 70P 625 - - 2000 -

          Technical details
          pressure 070 t︱punching cross-cut in cmm 26 in 20 mm︱punching cross-cut in cmm 57 in 9,0 mm︱work height max. 1075 mm︱stroke 55,0 mm︱no. of strokes 34 Hub/min︱throat 625 mm︱oil volume 75 ltr.︱total power requirement 7,5 kW︱weight 1.740 kg︱range L-W-H 1720 x 730 x 1730 mm︱
          ** Machine from a workshop for the disabled / little used Furnishing: - hydraulic punch with large projection - Support table at the punching station - various tools (punches + dies) - foot switch - Required instructions
            pressure 070 t
            punching cross-cut in cmm 26 in 20 mm
            punching cross-cut in cmm 57 in 9,0 mm
            work height max. 1075 mm
            stroke 55,0 mm
            no. of strokes 34 Hub/min
            throat 625 mm
            oil volume 75 ltr.
            total power requirement 7,5 kW
            weight 1.740 kg
            range L-W-H 1720 x 730 x 1730 mm
            Description :
            ** Machine from a workshop for the disabled / little used

            Furnishing:
            - hydraulic punch with large projection
            - Support table at the punching station
            - various tools (punches + dies)
            - foot switch
            - Required instructions
          Datasheet
          Request / Contact
          used  Punching Press BOSCHERT EL 750 Digital


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34165 · Punching Press

          BOSCHERT - EL 750 Digital - - 1998 -

          Technical details
          sheet width 750 mm︱plate length 1500 mm︱plate thickness 6,0 mm ST︱pressure 28,0 to︱work height max. 900 mm︱throat 750 mm︱height of stroke 0 - 30,0 mm︱punch diameter max. Ø 105 mm︱no. of strokes 100 Hub/min︱oil volume 115 l︱total power requirement 4,0 kW︱weight of the machine ca. 2600 kg︱range L-W-H 3200 x 1700 x 1500 mm︱
          The hydraulic punching machine ECCO LINE is specially designed for the processing of Sheet metal and profile parts have been optimized. She is distinguished by her Flexibility and manufacturing precision. The machines of the ECCO series LINE are equipped with 28.0 t punching force in connection with the proven Trump tool system. Furnishing: + very many application tools + - TRUMPF tool system * manual tool change approx. 15 sec. - Solid welded steel construction for maximum stability - Stop system with scales * Punching accuracy +/- 0.2 mm - Control panel: set-up, single and continuous stroke - Stepless lifting height adjustment * for setting the exact lifting height - Operation manual - 1x drawer cabinet for application tools - free-moving footswitch
            sheet width 750 mm
            plate length 1500 mm
            plate thickness 6,0 mm ST
            pressure 28,0 to
            work height max. 900 mm
            throat 750 mm
            height of stroke 0 - 30,0 mm
            punch diameter max. Ø 105 mm
            no. of strokes 100 Hub/min
            oil volume 115 l
            total power requirement 4,0 kW
            weight of the machine ca. 2600 kg
            range L-W-H 3200 x 1700 x 1500 mm
            Description :
            The hydraulic punching machine ECCO LINE is specially designed for the
            processing of
            Sheet metal and profile parts have been optimized. She is distinguished by her
            Flexibility and manufacturing precision. The machines of the ECCO series
            LINE are equipped with 28.0 t punching force in connection with the proven
            Trump tool system.

            Furnishing:
            + very many application tools +
            - TRUMPF tool system
            * manual tool change approx. 15 sec.
            - Solid welded steel construction for maximum stability
            - Stop system with scales
            * Punching accuracy +/- 0.2 mm
            - Control panel: set-up, single and continuous stroke
            - Stepless lifting height adjustment
            * for setting the exact lifting height
            - Operation manual
            - 1x drawer cabinet for application tools
            - free-moving footswitch
          Datasheet
          Request / Contact
          used  Punching Press DARLEY MPP 110


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34142 · Punching Press

          DARLEY - MPP 110 - - 1998 -

          Technical details
          pressure 110 t︱punching cross-cut in cmm Ø 30 in 25 mm︱stroke 33 Hub/min︱throat 630 mm︱Max. pressure 32 bar︱oil volume 95 l︱voltage 380 V︱total power requirement 15,0 kW︱weight of the machine ca. 4.500 kg.︱range L-W-H 1990 x 1100 x 2100 mm︱
          Furnishing: - hydraulic hole punch / punching machine - with horizontal turret unit * 6x stations for stamps * 6x stations for dies - Material support table - hydraulic sheet scraper - stepless stroke adjustment - Selector switch for: * Tool change * Setting mode * Working mode - automatic central lubrication unit - foot switch - Operating instructions (NL)
            pressure 110 t
            punching cross-cut in cmm Ø 30 in 25 mm
            stroke 33 Hub/min
            throat 630 mm
            Max. pressure 32 bar
            oil volume 95 l
            voltage 380 V
            total power requirement 15,0 kW
            weight of the machine ca. 4.500 kg.
            range L-W-H 1990 x 1100 x 2100 mm
            Description :
            Furnishing:
            - hydraulic hole punch / punching machine
            - with horizontal turret unit
            * 6x stations for stamps
            * 6x stations for dies
            - Material support table
            - hydraulic sheet scraper
            - stepless stroke adjustment
            - Selector switch for:
            * Tool change
            * Setting mode
            * Working mode
            - automatic central lubrication unit
            - foot switch
            - Operating instructions (NL)
          Datasheet
          Request / Contact
          used  Punching Press MUBEA HP 1000/760


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34123 · Punching Press

          MUBEA - HP 1000/760 - - 1998 -

          Technical details
          pressure 100 t︱punching cross-cut in cmm 40 in 22 mm︱stroke 120 mm︱column arm 760 mm︱total power requirement 8,5 kW︱dimensions of the machine ca. 1,95 x 1,50 x 2,00 m︱weight of the machine ca. 4,15 to︱
          Equipment: - robust / heavy hydraulic punch - Infinitely adjustable punching stroke - Large support table, including extension and ball casters - lots of punching tools - Swiveling front protective device, including sheet metal wiper - Scraper height adjustment - foot switch - instructions
            pressure 100 t
            punching cross-cut in cmm 40 in 22 mm
            stroke 120 mm
            column arm 760 mm
            total power requirement 8,5 kW
            dimensions of the machine ca. 1,95 x 1,50 x 2,00 m
            weight of the machine ca. 4,15 to
            Description :
            Equipment:
            - robust / heavy hydraulic punch
            - Infinitely adjustable punching stroke
            - Large support table, including extension and ball casters
            - lots of punching tools
            - Swiveling front protective device, including sheet metal wiper
            - Scraper height adjustment
            - foot switch
            - instructions

          Datasheet
          Request / Contact
          used  Punching Press MUHR & BENDER KL 30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34166 · Punching Press

          MUHR & BENDER - KL 30 - - 1974 (2020) -

          Technical details
          pressure 030 t︱punching cross-cut in cmm 30,0 in 8,0 mm︱stroke 72 p./min mm︱throat 200 mm︱punching cross-cut in cmm 20,0 in 12,0 mm︱table: 300 x 500 mm︱total power requirement 1,5 kW︱weight of the machine ca. 330 kg.︱range L-W-H 750 x 350 x 1500 mm︱
          ** from a maintenance workshop ** Machine was overhauled in 2020 ** very good condition (!!) Furnishing: - Electric punch with rotating wedge clutch - smooth-running grain search device - Support table, with stops & scale - punching device - Quick change system for punching tool - Die base - base - Connection cable with 16a plug - free-moving footswitch
            pressure 030 t
            punching cross-cut in cmm 30,0 in 8,0 mm
            stroke 72 p./min mm
            throat 200 mm
            punching cross-cut in cmm 20,0 in 12,0 mm
            table: 300 x 500 mm
            total power requirement 1,5 kW
            weight of the machine ca. 330 kg.
            range L-W-H 750 x 350 x 1500 mm
            Description :
            ** from a maintenance workshop
            ** Machine was overhauled in 2020
            ** very good condition (!!)

            Furnishing:
            - Electric punch with rotating wedge clutch
            - smooth-running grain search device
            - Support table, with stops & scale
            - punching device
            - Quick change system for punching tool
            - Die base
            - base
            - Connection cable with 16a plug
            - free-moving footswitch
          Datasheet
          Request / Contact
          used  Punching Press PEDDINGHAUS Hydraulic 280


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-34157 · Punching Press

          PEDDINGHAUS - Hydraulic 280 - - -

          Technical details
          punching pressure 028 t︱punching cross-cut in cmm 31 in 7 mm︱round bar steel 32,0 mm︱throat 250 mm︱dayligth 223 mm︱no. of strokes 10 - 30 Hub/min︱oil volume 32 ltr.︱work height max. 1.033 mm︱total power requirement 3,0 kW︱weight of the machine ca. 553 kg.︱dimensions of the machine ca. 730 x 540 x 1530 mm︱
          ** current new price ~ 8.000 euros Furnishing : - hydraulic punch - Sheet metal hold-down - Support table at punching station - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Various application tools
            punching pressure 028 t
            punching cross-cut in cmm 31 in 7 mm
            round bar steel 32,0 mm
            throat 250 mm
            dayligth 223 mm
            no. of strokes 10 - 30 Hub/min
            oil volume 32 ltr.
            work height max. 1.033 mm
            total power requirement 3,0 kW
            weight of the machine ca. 553 kg.
            dimensions of the machine ca. 730 x 540 x 1530 mm
            Description :
            ** current new price ~ 8.000 euros

            Furnishing :
            - hydraulic punch
            - Sheet metal hold-down
            - Support table at punching station
            - 2-step foot switch, with double press for grain search function
            - electrical controls
            - Stroke length and stroke position continuously adjustable
            - integrated hydraulic unit with oil filling
            - Performance specifications apply to a material strength of 450 N/mm²
            - Various application tools
          Datasheet
          Request / Contact

          Coil Line

          used  Coil Line KOHLER KRE 24.300/21-1500.2 B


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60110 · Coil Line

          KOHLER - KRE 24.300/21-1500.2 B - - 1983/2022 CHECK -

          Technical details
          sheet width 0300 mm︱coil outside dia. 1500 mm︱weight max. in kg 2 x 1500 kg︱thickness of sheet ca. 0,30 - 2,50/6,00 mm︱diam. of the rolls ca. 24 mm︱nomb. of straightening rolls 21 ︱speed 0-24 m/min︱decoiler Doppelabwickelhaspel ︱range of expansion ca. 380 - 450 mm︱working direction right - left ja / yes ︱expansion hydraulisch/hydraulic ︱brake pneumatisch/pneumatic ︱total power requirement 14 kW︱weight of the machine ca. 5,00 t︱dimensions of the machine ca. 3,60 x 1,90 x 2,50 m︱
          - Sheet thickness for steel 2.50 mm - Sheet thickness for aluminum 6.00 mm - Straightening machine with electromotive roller chair adjustment - Quick-change device for the straightening rollers - Double decoiler - Hydraulic pressure roller - Hold-down roller - Tape insertion wedge - Reel with top jaws 460 - 530 mm - Material thickness for aluminum 0.40 - 6.00 mm - Press infeed height min. 1470 mm - max. 1530 mm Dimensions: Roller basket 1.90 x 0.70 x 1.40 mm - weight 0.10 to Control cabinet 1.25 x 0.50 x 2.20 mm - weight 0.20 tons Hydraulic unit 0.70 x 0.50 x 1.00 mm - weight 0.10 to The coilline was checked by the specialist team and is now functional. Test with your material can be carried out by appointment.
            sheet width 0300 mm
            coil outside dia. 1500 mm
            weight max. in kg 2 x 1500 kg
            thickness of sheet ca. 0,30 - 2,50/6,00 mm
            diam. of the rolls ca. 24 mm
            nomb. of straightening rolls 21
            speed 0-24 m/min
            decoiler Doppelabwickelhaspel
            range of expansion ca. 380 - 450 mm
            working direction right - left ja / yes
            expansion hydraulisch/hydraulic
            brake pneumatisch/pneumatic
            total power requirement 14 kW
            weight of the machine ca. 5,00 t
            dimensions of the machine ca. 3,60 x 1,90 x 2,50 m
            Description :
            - Sheet thickness for steel 2.50 mm
            - Sheet thickness for aluminum 6.00 mm

            - Straightening machine with electromotive roller chair adjustment
            - Quick-change device for the straightening rollers
            - Double decoiler
            - Hydraulic pressure roller
            - Hold-down roller
            - Tape insertion wedge
            - Reel with top jaws 460 - 530 mm
            - Material thickness for aluminum 0.40 - 6.00 mm
            - Press infeed height min. 1470 mm - max. 1530 mm

            Dimensions:

            Roller basket 1.90 x 0.70 x 1.40 mm - weight 0.10 to
            Control cabinet 1.25 x 0.50 x 2.20 mm - weight 0.20 tons
            Hydraulic unit 0.70 x 0.50 x 1.00 mm - weight 0.10 to

            The coilline was checked by the specialist team and is now
            functional. Test with your material can be carried out by appointment.
          Datasheet
          Request / Contact

          Cut-to-length-lines

          used  Cut-to-length-lines FIMI


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3155 · Cut-to-length-lines

          FIMI - - - 2017 -

          Technical details
          sheet width 0600 mm︱plate thickness 5,00 mm︱no. of strokes Hub/min︱coil weight max. 15,00 t︱coil inside-diam. ca. 508- 610 mm︱coil outside - diam. ca. 800 - 2100 mm︱speed ca. 60 m/min.︱Tensile Strength max. 800 N/mm²︱working direction left - right ja / yes ︱sheet thickness - min. 2,50 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Straightening machine 4 HIGH with 9 rolls, diam.rolls 80 mm,   Cassette changing system
            sheet width 0600 mm
            plate thickness 5,00 mm
            coil weight max. 15,00 t
            coil inside-diam. ca. 508- 610 mm
            coil outside - diam. ca. 800 - 2100 mm
            speed ca. 60 m/min.
            Tensile Strength max. 800 N/mm²
            working direction left - right ja / yes
            sheet thickness - min. 2,50 mm
            Description :
            - Straightening machine 4 HIGH with 9 rolls, diam.rolls 80 mm,
              Cassette changing system
          Datasheet
          Request / Contact
          used  Cut-to-length-lines FIMI


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3136 · Cut-to-length-lines

          FIMI - - - 1999 -

          Technical details
          sheet width 1550 mm︱plate thickness 2,00 mm︱no. of strokes Hub/min︱sheet width - min. 250 mm︱sheet thickness - min. 0,25 mm︱coil weight 20,00 t︱coil inside-diam. ca. 508 - 610 mm︱coil external diameter 800 - 1800 mm︱speed 0 - 60 m/min︱plate length 400 - 5000 mm︱Stacking Height – incl. Palette 500 mm︱working direction right - left ja / yes ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 38,8 x 8,90 m︱
          CUT TO LENGTH LINE with BINDING LINE ==================================== Material Thickness Stainless Steel 0,25 – 1,50 mm Tensile Strength max. 500 N/mm² Yield Strength max. 380 N/mm² Line consisting of: - Coil Car Under Floor Coil Weight max. 20,0 t - Decoiler with Press Arm and Counter Bearing Coil Weight max. 20,0 t - Coil Opener / Driver – Unit - Foil Unit new - Leveller 4-Column Model No. – Levelling Rolls 19 Levelling Roll – Ø 45 mm No – Supports 7 - Conveyor Table - Cutting Shear - Scrap Switch - Conveyor Table - Stacking Unit - Binding Line manually - Hydraulic Equipment Working Pressure 100 bar - Electric Equipment incl. Control Cabinet and Control Desk Three-Phase Voltage 400 V, 50 Hz Auxiliary Voltage 220 V, 50 Hz Voltage of Electrovalves 110 V - Pneumatic Operating Pressure 6 bar
            sheet width 1550 mm
            plate thickness 2,00 mm
            sheet width - min. 250 mm
            sheet thickness - min. 0,25 mm
            coil weight 20,00 t
            coil inside-diam. ca. 508 - 610 mm
            coil external diameter 800 - 1800 mm
            speed 0 - 60 m/min
            plate length 400 - 5000 mm
            Stacking Height – incl. Palett. 500 mm
            working direction right - left ja / yes
            dimensions of the machine ca. 38,8 x 8,90 m
            Description :
            CUT TO LENGTH LINE with BINDING LINE
            ====================================

            Material Thickness Stainless Steel 0,25 – 1,50 mm
            Tensile Strength max. 500 N/mm²
            Yield Strength max. 380 N/mm²

            Line consisting of:
            - Coil Car Under Floor
            Coil Weight max. 20,0 t

            - Decoiler with Press Arm and Counter Bearing
            Coil Weight max. 20,0 t
            - Coil Opener / Driver – Unit
            - Foil Unit new
            - Leveller 4-Column Model
            No. – Levelling Rolls 19
            Levelling Roll – Ø 45 mm
            No – Supports 7
            - Conveyor Table
            - Cutting Shear
            - Scrap Switch
            - Conveyor Table
            - Stacking Unit
            - Binding Line manually
            - Hydraulic Equipment
            Working Pressure 100 bar
            - Electric Equipment incl. Control Cabinet and Control Desk
            Three-Phase Voltage 400 V, 50 Hz
            Auxiliary Voltage 220 V, 50 Hz
            Voltage of Electrovalves 110 V
            - Pneumatic
            Operating Pressure 6 bar
          Datasheet
          Request / Contact
          used  Cut-to-length-lines NOVASTILMEC


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3162 · Cut-to-length-lines

          NOVASTILMEC - - - 1997/2004 -

          Technical details
          sheet width 1500 mm︱plate thickness 3,00 mm︱no. of strokes Hub/min︱sheet thickness - min. 0,40 mm︱coil weight 25 t︱coil inside-diam. ca. 508/610/700 mm︱coil external diameter 2000 mm︱plate length 400 - 6000 mm︱speed 5 - 50 m/min︱working direction left - right ja / yes ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The system consists of: Coil lift truck, reel, 6 high straightening machine with 23 straightening rollers, diameter of the straightening rollers 50 mm Material to be processed: stainless / pre-painted / galvanized / cold-rolled steel
            sheet width 1500 mm
            plate thickness 3,00 mm
            sheet thickness - min. 0,40 mm
            coil weight 25 t
            coil inside-diam. ca. 508/610/700 mm
            coil external diameter 2000 mm
            plate length 400 - 6000 mm
            speed 5 - 50 m/min
            working direction left - right ja / yes
            Description :
            The system consists of:
            Coil lift truck, reel, 6 high straightening machine with 23 straightening
            rollers, diameter of the straightening rollers 50 mm
            Material to be processed: stainless / pre-painted / galvanized / cold-rolled
            steel
          Datasheet
          Request / Contact
          used  Cut-to-length-lines STAMCO


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3167 · Cut-to-length-lines

          STAMCO - - - 1992 -

          Technical details
          sheet width 0500 mm︱plate thickness 4,00 mm︱no. of strokes Hub/min︱sheet thickness - min. 0,50 mm︱coil weight 8,00 t︱coil inside-diam. ca. 5087610 mm︱coil outside - diam. ca. 700-2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          material cold rolled steel strip, dry, oiled, galvanized hot-rolled steel strip, scaled, dry, stained, oiled Tensile strength max. 700 N / mm² Material width max. 500 mm Material thickness at least 0.50 mm max. 3.00 mm at 700 N / mm² max. 4.00 mm at 400 N / mm² Coil weight max. 8.0 to. Coil inside - Ø 508/610 mm Coil outside - Ø 700 - 2,000 mm Board length min. 500 mm, max. 6,000 mm Length tolerances ± 0.20 mm to 2,000 mm ± 0.25 mm to 2,500 mm ± 0.30 mm to 3,500 mm ± 0.40 mm to 5,000 mm ± 0.50 mm to 6,000 mm Stack weight max. 3,000 kg Stacking height max. 500 mm with pallet Speed max. 50 m / min. (Straightening machine) Working direction left? to the right Belt passage height approx. 1,300 mm
            sheet width 0500 mm
            plate thickness 4,00 mm
            sheet thickness - min. 0,50 mm
            coil weight 8,00 t
            coil inside-diam. ca. 5087610 mm
            coil outside - diam. ca. 700-2000 mm
            Description :
            material
            cold rolled steel strip, dry, oiled,
            galvanized
            hot-rolled steel strip, scaled,
            dry,
            stained, oiled
            Tensile strength max. 700 N / mm²
            Material width max. 500 mm
            Material thickness at least 0.50 mm
            max. 3.00 mm at 700 N / mm²
            max. 4.00 mm at 400 N / mm²
            Coil weight max. 8.0 to.
            Coil inside - Ø 508/610 mm
            Coil outside - Ø 700 - 2,000 mm
            Board length min. 500 mm, max. 6,000 mm
            Length tolerances ± 0.20 mm to 2,000 mm
            ± 0.25 mm to 2,500 mm
            ± 0.30 mm to 3,500 mm
            ± 0.40 mm to 5,000 mm
            ± 0.50 mm to 6,000 mm
            Stack weight max. 3,000 kg
            Stacking height max. 500 mm with pallet
            Speed max. 50 m / min. (Straightening machine)
            Working direction left? to the right
            Belt passage height approx. 1,300 mm
          Datasheet
          Request / Contact
          used  Cut-to-length-lines SIEMI


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3157 · Cut-to-length-lines

          SIEMI - - - 1980/2010 -

          Technical details
          sheet width 1500 mm︱plate thickness 3,00 mm︱no. of strokes Hub/min︱sheet thickness - min. 0,60 mm︱coil weight 22 t︱coil internal diameter 508 - 600 mm︱coil external diameter 800 - 2000 mm︱speed max. 80 m/min︱diam. of the rolls ca. 45 mm︱nomb. of straightening rolls 19 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Length tolerance 0.25 mm - Strength 52 kg / mm - Shear strength 42 kg / mm - Yield strength 24 - 34 kg / mm - Working direction right to left The line is under power - you can inspect it.
            sheet width 1500 mm
            plate thickness 3,00 mm
            sheet thickness - min. 0,60 mm
            coil weight 22 t
            coil internal diameter 508 - 600 mm
            coil external diameter 800 - 2000 mm
            speed max. 80 m/min
            diam. of the rolls ca. 45 mm
            nomb. of straightening rolls 19
            Description :
            - Length tolerance 0.25 mm
            - Strength 52 kg / mm
            - Shear strength 42 kg / mm
            - Yield strength 24 - 34 kg / mm
            - Working direction right to left

            The line is under power - you can inspect it.
          Datasheet
          Request / Contact
          used  Cut-to-length-lines FIMI


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3118 · Cut-to-length-lines

          FIMI - - - -

          Technical details
          sheet width 1500 mm︱plate thickness 2,50 mm︱no. of strokes Hub/min︱sheet width - min. 200 mm︱sheet thickness - min. 0,40 mm︱coil weight 12,00 t︱coil inside-diam. ca. 508-610 mm︱plate length 350 - 7000 mm︱speed 30/40 m/min︱working direction left - right ja / yes ︱diam. of the rolls ca. 38 mm︱nomb. of straightening rolls 19 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Material :pickled and oiled, cold rolled, galvanized,electrolytically plated, coil-coated The Line consists of: - Coil Car : Underfloor - Decoiler Expanding: hydraulically - Leveller FIMI power Daylight Width No. - Levelling Rolls 19 Levelling Rolls - Ø 38 mm Roll Support sevenfold - Mounted Roller Cage (Looping Equipment - Infeed) - Looping Equipment Runout - Driver - Shear Manufacturer ATECNIN Year of Construction 2003 Material Thickness 0,40 - 3,00 mm - Conveyor - Stacking Unit Panel Length min. 350 mm / max. 7.000 mm Stacking Height 400 mm Package Weight 5,0 to. Electric Hydraulic
            sheet width 1500 mm
            plate thickness 2,50 mm
            sheet width - min. 200 mm
            sheet thickness - min. 0,40 mm
            coil weight 12,00 t
            coil inside-diam. ca. 508-610 mm
            plate length 350 - 7000 mm
            speed 30/40 m/min
            working direction left - right ja / yes
            diam. of the rolls ca. 38 mm
            nomb. of straightening rolls 19
            Description :
            Material :pickled and oiled, cold rolled, galvanized,electrolytically plated,
            coil-coated

            The Line consists of:
            - Coil Car : Underfloor
            - Decoiler
            Expanding: hydraulically
            - Leveller FIMI
            power Daylight Width
            No. - Levelling Rolls 19
            Levelling Rolls - Ø 38 mm
            Roll Support sevenfold
            - Mounted Roller Cage (Looping Equipment - Infeed)
            - Looping Equipment Runout
            - Driver
            - Shear Manufacturer ATECNIN
            Year of Construction 2003
            Material Thickness 0,40 - 3,00 mm
            - Conveyor
            - Stacking Unit
            Panel Length min. 350 mm / max. 7.000 mm
            Stacking Height 400 mm
            Package Weight 5,0 to.
            Electric
            Hydraulic

          Datasheet
          Request / Contact
          used  Cut-to-length-lines RIZZATO


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3163 · Cut-to-length-lines

          RIZZATO - - - -

          Technical details
          sheet width 1100 mm︱plate thickness 3,00 mm︱no. of strokes Hub/min︱coil weight 15 t︱speed 55 m/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          System consisting of: coil lift truck decoiler - load capacity 15.0 t infeed table pressure roller 4 HI leveling machine - 19 leveling rollers, leveling roller diameter 42 mm loop pit guillotine shears inspection table stacker - 3,000 mm unloading roller conveyor Electrics Pneumatics Hydraulics
            sheet width 1100 mm
            plate thickness 3,00 mm
            coil weight 15 t
            speed 55 m/min
            Description :
            System consisting of: coil lift truck decoiler - load capacity 15.0 t infeed
            table pressure roller 4 HI leveling machine - 19 leveling rollers, leveling
            roller diameter 42 mm loop pit guillotine shears inspection table stacker -
            3,000 mm unloading roller conveyor
            Electrics Pneumatics Hydraulics
          Datasheet
          Request / Contact
          used  Cut-to-length-lines FIMI


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-3165 · Cut-to-length-lines

          FIMI - - - -

          Technical details
          sheet width 0800 mm︱plate thickness 2,50 mm︱no. of strokes Hub/min︱coil weight 15 t︱coil internal diameter 508 mm︱coil outside dia. 1500 mm︱plate length 300 - 4000 mm︱plate width 300 - 1000 mm︱work speed 60 m/min︱working direction left - right ja / yes ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            sheet width 0800 mm
            plate thickness 2,50 mm
            coil weight 15 t
            coil internal diameter 508 mm
            coil outside dia. 1500 mm
            plate length 300 - 4000 mm
            plate width 300 - 1000 mm
            work speed 60 m/min
            working direction left - right ja / yes
          Datasheet
          Request / Contact

          Decoiler - Double

          used  Decoiler - Double SCHLEICHER 2-500


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7774 · Decoiler - Double

          SCHLEICHER - 2-500 - - 1978/2022 CHECK -

          Technical details
          sheet width 0400 mm︱coil weight 2 x 0,500 t︱coil internal dia. 280 - 500 mm︱coil outside - diam. ca. 1200 mm︱0 17 U/min︱total power requirement 2 x 0,25 kW︱weight of the machine ca. 0,60 t︱dimensions of the machine ca. 1,50 x 1,20 x 1,50 m︱
          double decoiler - Pneumatic brake - Mechanical spread with hand crank The double decoiler is immediately ready for use.
            sheet width 0400 mm
            coil weight 2 x 0,500 t
            coil internal dia. 280 - 500 mm
            coil outside - diam. ca. 1200 mm
            0 17 U/min
            total power requirement 2 x 0,25 kW
            weight of the machine ca. 0,60 t
            dimensions of the machine ca. 1,50 x 1,20 x 1,50 m
            Description :
            double decoiler

            - Pneumatic brake
            - Mechanical spread with hand crank

            The double decoiler is immediately ready for use.
          Datasheet
          Request / Contact

          Decoilers for Coils

          used  Decoilers for Coils UNGERER


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7262 · Decoilers for Coils

          UNGERER - - - 1993 -

          Technical details
          sheet width - max. 1800 mm︱coil weight 10,00 t︱coil internal dia. 508 mm︱coil external diameter 1800 mm︱working direction left - right ja / yes ︱range of expansion ca. 475 - 515 mm︱sheet thickness with Stahl / steel 4 mm︱sheet thickness with Aluminium 5 - 6 mm︱total power requirement kW︱weight of the machine ca. 9,0 t︱dimensions of the machine ca. 3,70 x 1,80 x 1,80 m︱
          Hydraulic snubber roll arm with hydraulic motor. Shifting movement for coil alignement +- 125 mm electric-hydraulic valves on board. Main Motor: It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain transmission ratio 1:2. Different motor and gearbox can be supplied according to the customer’s line speed. The decoiler is in excellent conditions and we have already checked the mandrel bearings. The snubber roll is new (polyurethane).
            sheet width - max. 1800 mm
            coil weight 10,00 t
            coil internal dia. 508 mm
            coil external diameter 1800 mm
            working direction left - right ja / yes
            range of expansion ca. 475 - 515 mm
            sheet thickness with Stahl / steel 4 mm
            sheet thickness with Aluminium 5 - 6 mm
            weight of the machine ca. 9,0 t
            dimensions of the machine ca. 3,70 x 1,80 x 1,80 m
            Description :
            Hydraulic snubber roll arm with hydraulic motor.
            Shifting movement for coil alignement +- 125 mm
            electric-hydraulic valves on board.

            Main Motor:
            It is installed a DC motor of power 10 kW plus gearbox ratio=1:25 + chain
            transmission ratio 1:2.
            Different motor and gearbox can be supplied according to the customer’s line
            speed.

            The decoiler is in excellent conditions and we have already checked
            the mandrel
            bearings. The snubber roll is new (polyurethane).

          Datasheet
          Request / Contact
          used  Decoilers for Coils IRON SF 1200


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7773 · Decoilers for Coils

          IRON - SF 1200 - - 1980/2022 CHECK -

          Technical details
          sheet width - max. 0450 mm︱coil weight 1,20 t︱coil internal dia. 360 - 550 mm︱coil outside - diam. ca. 1400 mm︱total power requirement kW︱weight of the machine ca. 0,50 t︱dimensions of the machine ca. 1,30 x 1,10 x 1,50 m︱
          - Jaw length 560 mm - 8 pieces waistband application arms - Mechanical brake - The inner diameter of the coil can be increased by 100 mm in width with 4 top jaws can be increased from 230 mm. - Mechanical spread with hand crank - the reel can be moved axially (pneumatically) Travel approx. 400 mm
            sheet width - max. 0450 mm
            coil weight 1,20 t
            coil internal dia. 360 - 550 mm
            coil outside - diam. ca. 1400 mm
            weight of the machine ca. 0,50 t
            dimensions of the machine ca. 1,30 x 1,10 x 1,50 m
            Description :
            - Jaw length 560 mm
            - 8 pieces waistband application arms
            - Mechanical brake
            - The inner diameter of the coil can be increased by 100 mm in width with 4 top
            jaws can be increased from 230 mm.
            - Mechanical spread with hand crank
            - the reel can be moved axially (pneumatically)
            Travel approx. 400 mm
          Datasheet
          Request / Contact
          used  Decoilers for Coils RDB


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7776 · Decoilers for Coils

          RDB - - - -

          Technical details
          sheet width - max. 1650 mm︱coil weight 16,00 t︱coil internal dia. 508-610 mm︱coil outside - diam. ca. 1800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Unwinding process possible from above and below Line speed - originally max. 50 m/min. Working direction (originally) left - right Accesories: Reel moveable on base frame Drive motor - forward / reverse three-phase AC geared motor Coil stop disc 1,600 mm ø Spread hydraulically Pressure arm / pressure roller hydraulic Brake unit pneumatic
            sheet width - max. 1650 mm
            coil weight 16,00 t
            coil internal dia. 508-610 mm
            coil outside - diam. ca. 1800 mm
            Description :
            Unwinding process possible from above and below
            Line speed - originally max. 50 m/min.
            Working direction (originally) left - right
            Accesories:
            Reel moveable on base frame
            Drive motor - forward / reverse three-phase AC geared motor
            Coil stop disc 1,600 mm ø
            Spread hydraulically
            Pressure arm / pressure roller hydraulic
            Brake unit pneumatic
          Datasheet
          Request / Contact

          Folding Machine

          used  Folding Machine JORNS 82-SM-RM-8000x1,5


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76454 · Folding Machine

          JORNS - 82-SM-RM-8000x1,5 - - ca. 1985 -

          Technical details
          sheet width 8020 mm︱plate thickness 1,50 mm︱distance between columns mm︱bending angle 142 °︱depth 1000 mm︱number of stands 7 Stück︱throat 1000 mm︱upper beam stroke 200 mm︱total power requirement kW︱weight of the machine ca. 4,50 t︱dimensions of the machine ca. 1800 x 9500 m︱
          with electric roller shears, with running cable box, bending angle for Setting, sheet thickness adjustment manually Machine has been checked by a specialist and is functional.
            sheet width 8020 mm
            plate thickness 1,50 mm
            bending angle 142 °
            depth 1000 mm
            number of stands 7 Stück
            throat 1000 mm
            upper beam stroke 200 mm
            weight of the machine ca. 4,50 t
            dimensions of the machine ca. 1800 x 9500 m
            Description :
            with electric roller shears, with running cable box, bending angle for
            Setting, sheet thickness adjustment manually

            Machine has been checked by a specialist and is functional.
          Datasheet
          Request / Contact
          used  Folding Machine FASTI 2095-25-2


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76461 · Folding Machine

          FASTI - 2095-25-2 - - ca. 1980 -

          Technical details
          sheet width 2540 mm︱plate thickness 2,00 mm︱distance between columns mm︱bending angle 160 °︱daylight opening 300 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 3,65 x 1,20 x 1,60 m︱
          motorized Fasti swivel bending machine, well preserved, bending beam 14 mm, Attachment rail 30 mm, folding beam that can be lowered manually, emergency/off switch,foot pedal Machine is repaired by a specialist, checked, cleaned and is then full Functional. Test run is carried out.
            sheet width 2540 mm
            plate thickness 2,00 mm
            bending angle 160 °
            daylight opening 300 mm
            dimensions of the machine ca. 3,65 x 1,20 x 1,60 m
            Description :
            motorized Fasti swivel bending machine, well preserved, bending beam 14 mm,
            Attachment rail 30 mm, folding beam that can be lowered manually, emergency/off
            switch,foot pedal
            Machine is repaired by a specialist, checked, cleaned and is then full
            Functional. Test run is carried out.
          Datasheet
          Request / Contact
          used  Folding Machine BIEGEMASTER XB 6x1,5


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76464 · Folding Machine

          BIEGEMASTER - XB 6x1,5 - - 2013 -

          Technical details
          sheet width 6400 mm︱plate thickness 1,50 mm︱distance between columns mm︱rear stop ja ︱total power requirement 15 kW︱weight of the machine ca. 7,30 t︱dimensions of the machine ca. 8,50 x 2,50 x 1,95 m︱
          Biegemaster double folding machine, with hydr. Motor shears, CNC controlled Back gauge, 2 foot switches, controls on the swivel arm A notice: Machine is currently still being revised, the illustrations created before the revision. Machine is repaired by a specialist, checked, cleaned and is then full functioning. Test run is carried out.
            sheet width 6400 mm
            plate thickness 1,50 mm
            rear stop ja
            total power requirement 15 kW
            weight of the machine ca. 7,30 t
            dimensions of the machine ca. 8,50 x 2,50 x 1,95 m
            Description :
            Biegemaster double folding machine, with hydr. Motor shears, CNC controlled
            Back gauge, 2 foot switches, controls on the swivel arm

            A notice:
            Machine is currently still being revised, the illustrations
            created before the revision.

            Machine is repaired by a specialist, checked, cleaned and is then full
            functioning. Test run is carried out.
          Datasheet
          Request / Contact
          used  Folding Machine SCHRÖDER SPB EVO 3200/4,0 UD


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76445 · Folding Machine

          SCHRÖDER - SPB EVO 3200/4,0 UD - - 2011 -

          Technical details
          sheet width 3240 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 650 mm︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 6,335 x 3,350 x 2,70 m︱
          SCHROEDER MOTORIZED PANEL BENDING MACHINE very good condition. - Upper beam: rotatable with 2 tool stations - Drive power upper beam: 2x4.24 kW - Beam speed: 100 mm/s - Bending beam adjustment: 80 mm Drive power bending beam: 2x 5.5 kW - Speed: 90 degrees/s - Bending beam adjustment: 80 mm - Bending center displacement 80 mm - Connection: 18 kVA, 400 V, 50 Hz PE • POS 3000 – 3D graphic control o 21.5" TFT touch screen color display o on the pivoting panel • Up'n Down bending beam, autom. controlled • Servo-inverter drives • Controlled backgauge 10-1700mm • 2 pneumatically lowerable angle stops in the aisle • Hydraulic upper tool clamping • Controlled center of rotation adjustment • Centrally adjustable, motorized crowning • Pneumatic stop system adjustment, "changeable slide" • Left and right angle stop • Support table with ball rollers • Lower tools: UW 20°, R 0.8mm, length 3250mm • Upper tools: h=18mm, 20°, R 0.8mm, length = 3250mm • Upper tools: split ram H 250mm, R1, length = 3250mm • Bending beam: flat bar 30mm type WZS 3000, divided • Light processes and light barrier • Foot switch for front and rear each 1x • Remote maintenance • Operating manual POS 3000 – 3D graphic control • View of product and machine in 3D representation • Product creation by free drawing (with finger) • Automatic bending sequence calculation • Fast axis control through Ethernet Powerlink • Open Ethernet interface for easy integration into the company network • Computer 2.0 GB memory • Windows 7 / IntelCore i5 2.5GHz • Unlimited product storage • Number of bending cycles limited only by computer power • Dynamic axis speeds and ramps in the drive axes • Partial steps in radius function > 1000 • Unlimited number of tool stores • Tool Setup Guide • Unlimited number of material data • Graphic collision detection between workpiece and machine body • External programming (PC version) 1st license • Language code: D, GB, E, RUS and others freely translatable • Switch mm / inch
            sheet width 3240 mm
            plate thickness 4,00 mm
            upper beam stroke 650 mm
            weight of the machine ca. 13 t
            dimensions of the machine ca. 6,335 x 3,350 x 2,70 m
            Description :
            SCHROEDER MOTORIZED PANEL BENDING MACHINE
            very good condition.

            - Upper beam: rotatable with 2 tool stations
            - Drive power upper beam: 2x4.24 kW
            - Beam speed: 100 mm/s
            - Bending beam adjustment: 80 mm
            Drive power bending beam: 2x 5.5 kW
            - Speed: 90 degrees/s
            - Bending beam adjustment: 80 mm
            - Bending center displacement 80 mm
            - Connection: 18 kVA, 400 V, 50 Hz PE

            • POS 3000 – 3D graphic control
            o 21.5" TFT touch screen color display
            o on the pivoting panel
            • Up'n Down bending beam, autom. controlled
            • Servo-inverter drives
            • Controlled backgauge 10-1700mm
            • 2 pneumatically lowerable angle stops in the aisle
            • Hydraulic upper tool clamping
            • Controlled center of rotation adjustment
            • Centrally adjustable, motorized crowning
            • Pneumatic stop system adjustment, "changeable slide"
            • Left and right angle stop
            • Support table with ball rollers
            • Lower tools: UW 20°, R 0.8mm, length 3250mm
            • Upper tools: h=18mm, 20°, R 0.8mm, length = 3250mm
            • Upper tools: split ram H 250mm, R1, length = 3250mm
            • Bending beam: flat bar 30mm type WZS 3000, divided
            • Light processes and light barrier
            • Foot switch for front and rear each 1x
            • Remote maintenance
            • Operating manual

            POS 3000 – 3D graphic control
            • View of product and machine in 3D representation
            • Product creation by free drawing (with finger)
            • Automatic bending sequence calculation
            • Fast axis control through Ethernet Powerlink
            • Open Ethernet interface for easy integration into the company network
            • Computer 2.0 GB memory
            • Windows 7 / IntelCore i5 2.5GHz
            • Unlimited product storage
            • Number of bending cycles limited only by computer power
            • Dynamic axis speeds and ramps in the drive axes
            • Partial steps in radius function > 1000
            • Unlimited number of tool stores
            • Tool Setup Guide
            • Unlimited number of material data
            • Graphic collision detection between workpiece and machine body
            • External programming (PC version) 1st license
            • Language code: D, GB, E, RUS and others freely translatable
            • Switch mm / inch
          Datasheet
          Request / Contact
          used  Folding Machine SCHRÖDER MAK 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76467 · Folding Machine

          SCHRÖDER - MAK 4 - - 2009 -

          Technical details
          sheet width 4000 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 400 mm︱total power requirement kW︱weight of the machine ca. 10,60 t︱dimensions of the machine ca. 6,10 x 2,10 (2,50) x 1,85 m︱
          Upper beam stroke: 400 mm Upper beam motor: 6.0 kW Motor bending beam: 4.0 kW Bending angle adjustment: 6 - 135° Height adjustability - the bending beam 80 mm / the lower beam 80 mm • 3D graphic control POS 3000 • Ball screws for the upper beam • Motorized folding beam adjustment • Hydraulic tool clamping above • Centrally adjustable crowning • Split Goosefoot tool • Back gauge 1000 mm with support table • Stop fingers can be lowered pneumatically • E. footswitch
            sheet width 4000 mm
            plate thickness 4,00 mm
            upper beam stroke 400 mm
            weight of the machine ca. 10,60 t
            dimensions of the machine ca. 6,10 x 2,10 (2,50) x 1,85 m
            Description :
            Upper beam stroke: 400 mm
            Upper beam motor: 6.0 kW
            Motor bending beam: 4.0 kW
            Bending angle adjustment: 6 - 135°
            Height adjustability - the bending beam 80 mm / the lower beam 80 mm

            • 3D graphic control POS 3000
            • Ball screws for the upper beam
            • Motorized folding beam adjustment
            • Hydraulic tool clamping above
            • Centrally adjustable crowning
            • Split Goosefoot tool
            • Back gauge 1000 mm with support table
            • Stop fingers can be lowered pneumatically
            • E. footswitch
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Профіль торговця: Frech GmbH

          Зв'язатися з трейдером



            Frech GmbH
           Werderstr. 82
            74889 - Зінсхайм
            Німеччина
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Профіль Трейдера

          Заснована в 1945 Карлом Фрехом, а пані Ніколь Фреч - менеджером 3rd покоління, компанія може озирнутися на багаторічну ділову традицію 60 у місті Зінсхайм поблизу Гейдельберга в німецькому регіоні Баден. 

          Готель Sinsheim розташований на автостраді A6, на відстані однієї години їзди на автостраді від аеропортів Франкфурт-на-Майні та Штутгарта. Компанія FRECH GmbH спеціалізується на роботі з вживаним обладнанням (роз'єднувачі, відновлювачі, валкові важелі, котушки, лінії для формування валків, лінії розрізання, лінії розрізання по довжині, стани холодної прокатки і рулонні машини). 

          Крім того, FRECH-Team виступає в якості агента в наступних областях використовуваної техніки: намотувальні машини, фальцювальні машини, шліфувальні верстати, прес-гальма, преси, металобрухт металобрухту і ножиці. Зв'яжіться з нами, будь ласка !!! - Ми допоможемо Вам також в інших областях. На площі близько 1000 квадратних метрів залів і роздрібних приміщень ми показуємо ряд постійно змінюваних машин, що знаходяться в руці, які знаходяться в належному робочому стані і, здебільшого, придатні для демонстрації. 

          Чому б / у техніка? 

          Машини б / у в більшості випадків відразу доступні і готові до експлуатації. Frech - це ваша перша адреса, коли ви хочете зменшити капітальні витрати і підвищити економічну ефективність вашого обладнання. 

          Купівля та продаж уживаної техніки - справа довіри - Фрех - ваш найкращий контакт

          НАШІ КОНТАКТИ




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Aufwickelhaspel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·