Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          GWM GmbH Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Bar Automatic Lathe - Multi Spindle

          used  Bar Automatic Lathe - Multi Spindle PITTLER-ACME PRB 32/6


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-0737 · Bar Automatic Lathe - Multi Spindle

          PITTLER-ACME - PRB 32/6 - - 1965 -

          Technical details
          number of spindles 6 ︱spindle passage 32 mm︱turning length 152 mm︱Speed 200-2800 U/min.︱turning diameter 32 mm︱feed Werkstoff: 254 mm︱
          Accessories: multi edge turning, univ. thread cutting attachment, Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels
            number of spindles 6
            spindle passage 32 mm
            turning length 152 mm
            Speed 200-2800 U/min.
            turning diameter 32 mm
            feed Werkstoff: 254 mm
            Description :
            Accessories:
            multi edge turning, univ. thread cutting attachment,
            Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe WEILER LD 220


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3149 · Center Lathe

          WEILER - LD 220 - - unbekannt -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 600 mm︱turning speed range 50-1500 U/min︱feeds - longitudinal 0,8 t︱feeds - cross 1,8 x 1,2 x 1,2 m︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,4 / 1,9 m︱
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 600 mm
            turning speed range 50-1500 U/min
            feeds - longitudinal 0,8 t
            feeds - cross 1,8 x 1,2 x 1,2 m
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,4 / 1,9 m
          Datasheet
          Request / Contact
          used  Center Lathe Optimum D 330 x 1000 DPA


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3137 · Center Lathe

          Optimum - D 330 x 1000 DPA - - 2015 -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 196 mm︱turning length 1000 mm︱spindle passage 40 mm︱turning speeds 70-2000 U/min︱weight of the machine ca. 1 t︱
            turning diameter over bed 330 mm
            turning diameter over slide rest 196 mm
            turning length 1000 mm
            spindle passage 40 mm
            turning speeds 70-2000 U/min
            weight of the machine ca. 1 t
          Datasheet
          Request / Contact
          used  Center Lathe Konventa Rasa 480/2000


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3126 · Center Lathe

          Konventa - Rasa 480/2000 - - 1997 -

          Technical details
          turning diameter over bed 480 mm︱turning diameter over slide rest 350 mm︱turning length 2000 mm︱spindle passage 60 mm︱turning speeds 11-2240 U/min︱weight of the machine ca. 5 t︱
            turning diameter over bed 480 mm
            turning diameter over slide rest 350 mm
            turning length 2000 mm
            spindle passage 60 mm
            turning speeds 11-2240 U/min
            weight of the machine ca. 5 t
          Datasheet
          Request / Contact
          used  Center Lathe Leinen 150


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3147 · Center Lathe

          Leinen - 150 - - 1980 -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1250 kg︱dimensions of the machine ca. m︱
          S C H A U B L I N (Switzerland) Universal Tool Room Lathe with HEIDENHAIN Digital Read-Out Model 150 Year 1990 Serial No. 32 33 24 _______________________________________________________ Height of centres 150 mm Max. swing dia. above bed 340 mm Max. swing dia. above slide 170 mm Distance between centres 600 mm Travel of slide, longitudinal / cross 600 / 180 / 100 mm Spindle bore, approx. 40 mm 12 Spindle speeds 55 – 3,000 rpm Thread cutting: Metric 0.25 – 14 mm Whitworth 112 -1 1/2 “ Module 0.125 – 7,5 Longitudinal and cross feeds 0.015 – 0.35 mm Spindle-Total drive, approx. 3.1/ 5 kW - 400 V - 50 Hz Weight, approx. 1,250 kg Accessories / Special Features: * HEIDENHAIN Digital Display in 3 axes for Z1 u. Z 2 u. X, * Steplessly adjustable spindle speeds by handwheel * Electrical Controlled Fold-down chuck shield and chip safety hood. * 1 built-on 3-jaw chuck, approx. Ø 150 mm, with approx. 10 sets of jaws. * Face plate, Ø approx. 330 mm, with adjustable jaws, one 4-Jaws Chuck approx.165 mm * MULTIFIX quick-change tool holder unit with approx.10 toolholders * Hand Lever quick clamping device for collets, with approx.10 collets * Safety Emergency stop, covers are electrically controlled for emergency stop * various centres, covered/protected lead screw spindle, * length adjustable stop for main slide, safety stop switches for main slide, * motorized quick feed for main slide, coolant equipment, machine light, * central lubrication, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1250 kg
            Description :
            S C H A U B L I N (Switzerland)
            Universal Tool Room Lathe with HEIDENHAIN Digital Read-Out
            Model 150 Year 1990 Serial No. 32 33 24
            _______________________________________________________

            Height of centres 150 mm
            Max. swing dia. above bed 340 mm
            Max. swing dia. above slide 170 mm

            Distance between centres 600 mm
            Travel of slide, longitudinal / cross 600 / 180 / 100 mm

            Spindle bore, approx. 40 mm
            12 Spindle speeds 55 – 3,000 rpm

            Thread cutting: Metric 0.25 – 14 mm
            Whitworth 112 -1 1/2 “
            Module 0.125 – 7,5

            Longitudinal and cross feeds 0.015 – 0.35 mm

            Spindle-Total drive, approx. 3.1/ 5 kW - 400 V - 50 Hz
            Weight, approx. 1,250 kg

            Accessories / Special Features:

            * HEIDENHAIN Digital Display in 3 axes for Z1 u. Z 2 u. X,
            * Steplessly adjustable spindle speeds by handwheel
            * Electrical Controlled Fold-down chuck shield and chip safety hood.
            * 1 built-on 3-jaw chuck, approx. Ø 150 mm, with approx. 10 sets of jaws.
            * Face plate, Ø approx. 330 mm, with adjustable jaws, one 4-Jaws Chuck
            approx.165 mm
            * MULTIFIX quick-change tool holder unit with approx.10 toolholders
            * Hand Lever quick clamping device for collets, with approx.10 collets
            * Safety Emergency stop, covers are electrically controlled for emergency
            stop
            * various centres, covered/protected lead screw spindle,
            * length adjustable stop for main slide, safety stop switches for main
            slide,
            * motorized quick feed for main slide, coolant equipment, machine light,
            * central lubrication, etc.

            Condition : Good to very good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact
          used  Center Lathe LZ - Drehmaschine Meuser


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3145 · Center Lathe

          LZ - Drehmaschine - Meuser - - 1970 -

          Technical details
          turning diameter over bed 350 mm︱turning diameter over slide rest 160 mm︱turning length 1000 mm︱centre height 170 mm︱spindle bore 30 mm︱turning speed range 40 - 1800 U/min︱feeds - longitudinal 0,03 - 0,35 mm/U︱feeds - cross 0,006 - 0,074 mm/U︱thread - mm pitch 0,25 - 76 mm︱thread - inch 1/2 - 152 Gang / inch.︱tailstock quill diameter 55 mm︱tailstock quill taper MT 4 ︱weight 2,2 t︱dimensions of the machine ca. 2,5 x 1,2 x 1,5 m︱total power requirement 3 kW︱
          3-jaw chuck 200 mm quick change steel holder with 3 cases, DRO
            turning diameter over bed 350 mm
            turning diameter over slide rest 160 mm
            turning length 1000 mm
            centre height 170 mm
            spindle bore 30 mm
            turning speed range 40 - 1800 U/min
            feeds - longitudinal 0,03 - 0,35 mm/U
            feeds - cross 0,006 - 0,074 mm/U
            thread - mm pitch 0,25 - 76 mm
            thread - inch 1/2 - 152 Gang / inch.
            tailstock quill diameter 55 mm
            tailstock quill taper MT 4
            weight 2,2 t
            dimensions of the machine ca. 2,5 x 1,2 x 1,5 m
            total power requirement 3 kW
            Description :
            3-jaw chuck 200 mm
            quick change steel holder with 3 cases,
            DRO
          Datasheet
          Request / Contact
          used  Center Lathe Boeringer VDF


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3125 · Center Lathe

          Boeringer - VDF - - 1968 -

          Technical details
          turning diameter over bed 800 mm︱turning diameter over slide rest 500 mm︱turning diameter in the gap - mm︱turning length 4000 mm︱turning speeds 1120 U/min︱spindle bore 60 mm︱
          Center lathe with - 3-jaw chuck Forkardt F315 - Quick change steel holder IDEAL with 8 pockets - Feed in the upper support - Bezel, diameter max.410mm - coolant system - machine light - Chip tray
            turning diameter over bed 800 mm
            turning diameter over slide rest 500 mm
            turning diameter in the gap - mm
            turning length 4000 mm
            turning speeds 1120 U/min
            spindle bore 60 mm
            Description :
            Center lathe with
            - 3-jaw chuck Forkardt F315
            - Quick change steel holder IDEAL with 8 pockets
            - Feed in the upper support
            - Bezel, diameter max.410mm
            - coolant system
            - machine light
            - Chip tray
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used  CNC Lathe - Inclined Bed Type GILDEMEISTER CTX 200 S2


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3032 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - CTX 200 S2 - - 1998 - Heidenhain cnc-Pilot

          Technical details
          Driven tools 0 ︱turning diameter over bed 440 mm︱turning diameter over slide 210 mm︱turning length 350 mm︱cross movement 160 mm︱longitudinal travel 350 mm︱turning speeds 25-5000 U/min︱rapid power traverse in X-and Z direction 20,30 m/min︱tailstock taper MT 3 ︱power capacity 35 kW︱tooling places 12-fach ︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. m︱control Heidenhain cnc-Pilot︱
          3jaw chuck tail stock chip conveyor coolant device pindle hole tie rod 56 mm
            turning diameter over bed 440 mm
            turning diameter over slide 210 mm
            turning length 350 mm
            cross movement 160 mm
            longitudinal travel 350 mm
            turning speeds 25-5000 U/min
            rapid power traverse in X-and Z . 20,30 m/min
            tailstock taper MT 3
            power capacity 35 kW
            tooling places 12-fach
            weight of the machine ca. 2,5 t
            control Heidenhain cnc-Pilot
            Description :
            3jaw chuck
            tail stock
            chip conveyor
            coolant device
            pindle hole tie rod 56 mm


          Datasheet
          Request / Contact
          used  CNC Lathe - Inclined Bed Type MAX MUELLER MDW 20


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2947 · CNC Lathe - Inclined Bed Type

          MAX MUELLER - MDW 20 - - 1986 - Gildemeister

          Technical details
          turning diameter durchgehend 310 mm︱turning length 2000 mm︱control Gildemeister ︱centre height 450 mm︱turning diameter over bed 850 mm︱z-axis 2060 mm︱x-axis 510 mm︱spindle head 11 ︱spindle diameter in front bearing 200 mm︱spindle bore 128 mm︱spindle motor 50 kW︱spindle turning speed range 11- 1400 U/min︱max. torque on the spindle 3700 Nm︱tooling places 13 ︱chain magazin ︱total power requirement 78 kW︱weight of the machine ca. 14 t︱dimensions of the machine ca. 7,4x4,5x2,6 m︱
          - power chuck SMW KNCS 630 +500 - 12-fold drum type tool magazine - chip conveyor and coolant device - various tolholders
            turning diameter durchgehend 310 mm
            turning length 2000 mm
            control Gildemeister
            centre height 450 mm
            turning diameter over bed 850 mm
            z-axis 2060 mm
            x-axis 510 mm
            spindle head 11
            spindle diameter in front bearin. 200 mm
            spindle bore 128 mm
            spindle motor 50 kW
            spindle turning speed range 11- 1400 U/min
            max. torque on the spindle 3700 Nm
            tooling places 13
            total power requirement 78 kW
            weight of the machine ca. 14 t
            dimensions of the machine ca. 7,4x4,5x2,6 m
            Description :

            - power chuck SMW KNCS 630 +500
            - 12-fold drum type tool magazine
            - chip conveyor and coolant device
            - various tolholders

          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center GILDEMEISTER Twin500


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3058 · CNC Turning- and Milling Center

          GILDEMEISTER - Twin500 - - 2002 - Siemens 840D

          Technical details
          control Siemens 840D︱weight of the machine ca. 18 t︱dimensions of the machine ca. 8,10x1,8x3,2 m︱turning length 1850 mm︱
          spindle hours approx. 21.000 h Working hours approx: Technical details attached with loading portal and feeding belt
            control Siemens 840D
            weight of the machine ca. 18 t
            dimensions of the machine ca. 8,10x1,8x3,2 m
            turning length 1850 mm
            Description :
            spindle hours approx. 21.000 h
            Working hours approx:
            Technical details attached
            with loading portal and feeding belt
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center WFL M30 x 950


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2735 · CNC Turning- and Milling Center

          WFL - M30 x 950 - - 1998 - Siemens 840C

          Technical details
          turning diameter 300 mm︱turning length 1050 mm︱swing over bed 520 mm︱swing diameter over slide rest 440 mm︱swing diameter 300 mm︱power requirement 15/22 kW︱spindle bore 77 mm︱Speed 10-5000 U/min.︱control Siemens 840C
          daylight in tube turning spindle right and turning psindle left = 77 mm 85.000 h switch-on hours tool piece magazine 2 x 24 tool turret lower slide 2 x 12 tools tool adaptor Capto C4 1 set of tool adaptor
            turning diameter 300 mm
            turning length 1050 mm
            swing over bed 520 mm
            swing diameter over slide rest 440 mm
            swing diameter 300 mm
            power requirement 15/22 kW
            spindle bore 77 mm
            Speed 10-5000 U/min.
            control Siemens 840C
            Description :
            daylight in tube turning spindle right and turning psindle left = 77 mm
            85.000 h switch-on hours
            tool piece magazine 2 x 24
            tool turret lower slide 2 x 12 tools
            tool adaptor Capto C4

            1 set of tool adaptor



          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center WFL  5-ACHSEN M 50


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-1976 · CNC Turning- and Milling Center

          WFL 5-ACHSEN - M 50 - - 1993 - SINUMERIK 880T

          Technical details
          turning diameter 540 mm︱turning length 1600 mm︱control SINUMERIK 880T ︱power capacity 37 kW︱turning speeds 4000 U/min︱tool taper SK 40 DIN 69871 - A40 ︱greates pass round over bed 540 mm︱chuck diameter 250 mm︱swing diameter over slide rest 450 mm︱tool magazin: 24-fach
          Turning-, Drilling and Milling Unit: Tool System SK 40 C- axis clamping chuck SMW KNCS 250 swarf conveyor 12-fold turret 3D Interpolation electronical hand wheel Machine is for complete working.
            turning diameter 540 mm
            turning length 1600 mm
            control SINUMERIK 880T
            power capacity 37 kW
            turning speeds 4000 U/min
            tool taper SK 40 DIN 69871 - A40
            greates pass round over bed 540 mm
            chuck diameter 250 mm
            swing diameter over slide rest 450 mm
            tool magazin: 24-fach
            Description :
            Turning-, Drilling and Milling Unit: Tool System SK 40
            C- axis
            clamping chuck SMW KNCS 250
            swarf conveyor
            12-fold turret
            3D Interpolation
            electronical hand wheel

            Machine is for complete working.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SCHAUBLIN CNC 125 Zyklendrehmaschine


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3082 · Lathe - cycle-controlled

          SCHAUBLIN - CNC 125 Zyklendrehmaschine - - 1994 - Fanuc 20-T

          Technical details
          turning diameter 270 mm︱turning length 440 mm︱control Fanuc 20-T ︱spindle bore 28 mm︱hardening length 0-5000 mm/min︱tool taper Multifix A ︱spindle nose CAMLOCK D1-3 ︱total power requirement 7,5 kW︱weight of the machine ca. 1450 t︱dimensions of the machine ca. m︱
          6 axis machine with support spindle C-axis, Y-axis chip conveyor 2 pieces of 3-jaw chucks 2 x tool turrets with 12 tool postion and driven tools
            turning diameter 270 mm
            turning length 440 mm
            control Fanuc 20-T
            spindle bore 28 mm
            hardening length 0-5000 mm/min
            tool taper Multifix A
            spindle nose CAMLOCK D1-3
            total power requirement 7,5 kW
            weight of the machine ca. 1450 t
            Description :
            6 axis machine with support spindle
            C-axis, Y-axis
            chip conveyor
            2 pieces of 3-jaw chucks
            2 x tool turrets with 12 tool postion and driven tools
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled VDF BOEHRINGER DUS 560 / 1000


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3000 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 560 / 1000 - - 1992 - Sinumerik 805 D Siemens

          Technical details
          turning diameter max. 570 mm︱turning length 1000 mm︱control Sinumerik 805 D Siemens︱greates pass round over bed 570 mm︱swing diameter over face slide 365 mm︱standard turning dia. 345 mm︱Main spindle: ︱turning speed range - main spindle 3 - 2.500 min/-1︱no. of turning speeds 2 ︱power capacity - main spindel 15 / 21 kW︱max. Torque 2.000 Nm︱spindle diameter in front bearing 100 mm︱spindle bore ( 62 ) mm︱spindle head DIN 55027 No. 8︱chucking diameter 250 mm︱axis stroke: ︱radial face slide travel 345 mm︱travel upper slide 125 mm︱Tailstock: ︱diameter of quill 80 mm︱
            turning diameter max. 570 mm
            turning length 1000 mm
            control Sinumerik 805 D Siemens
            greates pass round over bed 570 mm
            swing diameter over face slide 365 mm
            standard turning dia. 345 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            no. of turning speeds 2
            power capacity - main spindel 15 / 21 kW
            max. Torque 2.000 Nm
            spindle diameter in front bearin. 100 mm
            spindle bore ( 62 ) mm
            spindle head DIN 55027 No. 8
            chucking diameter 250 mm
            radial face slide travel 345 mm
            travel upper slide 125 mm
            diameter of quill 80 mm
            Description :

          Datasheet
          Request / Contact

          Multi-Edge Turning Lathe

          used  Multi-Edge Turning Lathe HAHN & KOLB TORNOMAT 2


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3123 · Multi-Edge Turning Lathe

          HAHN & KOLB - TORNOMAT 2 - - 1971 -

          Technical details
          turning diameter 40 mm︱turning length 40 mm︱centre distance 150 mm︱square 3-24 mm︱x-travel 30 mm︱power capacity 2,2 kW︱voltage 380 / 50 V / Hz︱weight of the machine ca. 1,3 t︱
          accessories: see attached sheet: blade heads (indexing) possible multi-edge clamping-jaws available working hours: 21204 collets available (feeding device)
            turning diameter 40 mm
            turning length 40 mm
            centre distance 150 mm
            square 3-24 mm
            x-travel 30 mm
            power capacity 2,2 kW
            voltage 380 / 50 V / Hz
            weight of the machine ca. 1,3 t
            Description :
            accessories: see attached sheet:
            blade heads (indexing)
            possible multi-edge
            clamping-jaws available
            working hours: 21204
            collets available
            (feeding device)
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe TORNOS R10


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2640 · Turning Automatic Lathe - swiss lathe

          TORNOS - R10 - - -

          Technical details
          turning diameter over bed 10 mm︱spindle passage 10 mm︱turning length 70 mm︱turning speed range 8835 U/min︱Boring depth max. mm︱speed control shaft U/min︱total power requirement 2,2 kW︱
          with 3-spindle bore and thread-cutting unit, bar loader Serialno. 56136
            turning diameter over bed 10 mm
            spindle passage 10 mm
            turning length 70 mm
            turning speed range 8835 U/min
            total power requirement 2,2 kW
            Description :
            with 3-spindle bore and thread-cutting unit, bar loader
            Serialno. 56136
          Datasheet
          Request / Contact

          Turret Lathe - Automatic

          used  Turret Lathe - Automatic SCHAUBLIN TR 102-80


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3092 · Turret Lathe - Automatic

          SCHAUBLIN - TR 102-80 - - 1988 -

          Technical details
          turning length 300 mm︱workpiece dia. 200 mm︱turret head Werkzeugstationen 6︱number of spindle speeds 700-3000 U/min︱spindle bore 20 mm︱rapid traverse 9 m/min︱total power requirement 1 kW︱weight of the machine ca. ca. 1,0 t︱dimensions of the machine ca. 1,10 x 0,4 x 1,2 m︱
          machine has a lot of accessories operating instruction
            turning length 300 mm
            workpiece dia. 200 mm
            turret head Werkzeugstationen 6
            number of spindle speeds 700-3000 U/min
            spindle bore 20 mm
            rapid traverse 9 m/min
            total power requirement 1 kW
            weight of the machine ca. ca. 1,0 t
            dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
            Description :
            machine has a lot of accessories
            operating instruction

          Datasheet
          Request / Contact
          used  Turret Lathe - Automatic SCHAUBLIN TR 102-80


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3136 · Turret Lathe - Automatic

          SCHAUBLIN - TR 102-80 - - 1988 -

          Technical details
          turning length 300 mm︱workpiece dia. 200 mm︱turret head Werkzeugstationen 6︱number of spindle speeds 700-3000 U/min︱spindle bore 20 mm︱rapid traverse 9 m/min︱total power requirement 1 kW︱weight of the machine ca. ca. 1,0 t︱dimensions of the machine ca. 1,10 x 0,4 x 1,2 m︱
          machine has a lot of accessories operating instruction
            turning length 300 mm
            workpiece dia. 200 mm
            turret head Werkzeugstationen 6
            number of spindle speeds 700-3000 U/min
            spindle bore 20 mm
            rapid traverse 9 m/min
            total power requirement 1 kW
            weight of the machine ca. ca. 1,0 t
            dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
            Description :
            machine has a lot of accessories
            operating instruction

          Datasheet
          Request / Contact
          used  Turret Lathe - Automatic SCHAUBLIN TR 102-80


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3141 · Turret Lathe - Automatic

          SCHAUBLIN - TR 102-80 - - 1963 -

          Technical details
          turning length 300 mm︱workpiece dia. 200 mm︱turret head Werkzeugstationen 6︱number of spindle speeds 700-3000 U/min︱spindle bore 20 mm︱rapid traverse 9 m/min︱total power requirement 1 kW︱weight of the machine ca. ca. 1,0 t︱dimensions of the machine ca. 1,10 x 0,4 x 1,2 m︱
          machine has a lot of accessories operating instruction
            turning length 300 mm
            workpiece dia. 200 mm
            turret head Werkzeugstationen 6
            number of spindle speeds 700-3000 U/min
            spindle bore 20 mm
            rapid traverse 9 m/min
            total power requirement 1 kW
            weight of the machine ca. ca. 1,0 t
            dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
            Description :
            machine has a lot of accessories
            operating instruction

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column SCHIESS 14 DKE 100


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-1962 · Vertical Turret Lathe - Single Column

          SCHIESS - 14 DKE 100 - - 1969 -

          Technical details
          faceplate diameter 1000 mm︱swing diameter 1400 mm︱turning height 780 mm︱tool travel 780 mm ︱cross rail - adjustment 800 mm︱workpiece weight max. 8000 kg︱Dimensions (L/W/H) 2,9 x 2,8 x 3,10 mm︱
          good condition tool holder fourfold with side-support overhauled 1992
            faceplate diameter 1000 mm
            swing diameter 1400 mm
            turning height 780 mm
            tool travel 780 mm
            cross rail - adjustment 800 mm
            workpiece weight max. 8000 kg
            Dimensions (L/W/H) 2,9 x 2,8 x 3,10 mm
            Description :
            good condition
            tool holder fourfold
            with side-support
            overhauled 1992
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column JUNGENTHAL PK 8


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2937 · Vertical Turret Lathe - Single Column

          JUNGENTHAL - PK 8 - - 1969 -

          Technical details
          faceplate diameter 1000 mm︱swing diameter 1120 mm︱turning height 800 mm︱no. of the slides 1 ︱swivel range of slides - vertical +/- 30 °︱faceplate turning speed range 3,5 - 112 U/min︱electrics - voltage/frequency 380/50 V/Hz︱feed range 0,25-5,6 und 0,063-1,4 mm mm/U︱weight of the machine ca. 10 t︱dimensions of the machine ca. 2,5 x 2,5,0 x 3,6 m︱
            faceplate diameter 1000 mm
            swing diameter 1120 mm
            turning height 800 mm
            no. of the slides 1
            swivel range of slides - vertica. +/- 30 °
            faceplate turning speed range 3,5 - 112 U/min
            electrics - voltage/frequency 380/50 V/Hz
            feed range 0,25-5,6 und 0,063-1,4 mm mm/U
            weight of the machine ca. 10 t
            dimensions of the machine ca. 2,5 x 2,5,0 x 3,6 m
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine TB 10 TB 10


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3154 · Bench Drilling Machine

          TB 10 - TB 10 - - 1974 -

          Technical details
          bore capacity in steel (diameter) 13 mm︱throat 170 mm︱bore stroke 120 mm︱boring spindle MK 2 ︱table surface area rund 200 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,072 t︱dimensions of the machine ca. 0,7 x 0,4 x 1,1 m︱
            bore capacity in steel (diameter. 13 mm
            throat 170 mm
            bore stroke 120 mm
            boring spindle MK 2
            table surface area rund 200 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,072 t
            dimensions of the machine ca. 0,7 x 0,4 x 1,1 m
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C Optimum MB 4 PV


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3138 · Drilling and Milling M/C

          Optimum - MB 4 PV - - 2015 -

          Technical details
          bore capacity in steel (diameter) 20 mm︱x-travel 510 mm︱y-travel 240 mm︱table-size 240x800 mm︱spindle taper MT 3 ︱mx. distance bet.vert. milling head and table 450 mm︱turning speeds 0 - 2500 U/min︱ 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 420 kg︱dimensions of the machine ca. 870 x 890 x 1920 mm︱
          ?solid column to avoid vibration ?gear wheels in oil bath ?left and right turning ?precision setting for milling depth ?with drawbar (M12)
            bore capacity in steel (diameter. 20 mm
            x-travel 510 mm
            y-travel 240 mm
            table-size 240x800 mm
            spindle taper MT 3
            mx. distance bet.vert. milling h. 450 mm
            turning speeds 0 - 2500 U/min
            400 V
            total power requirement 0,75 kW
            weight of the machine ca. 420 kg
            dimensions of the machine ca. 870 x 890 x 1920 mm
            Description :
            ?solid column to avoid vibration
            ?gear wheels in oil bath
            ?left and right turning
            ?precision setting for milling depth
            ?with drawbar (M12)

          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine FEHLMANN Picomax 51 CNC


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3088 · Jig Boring Machine

          FEHLMANN - Picomax 51 CNC - - 1990 -

          Technical details
          spindle diameter 70 mm︱x-travel 420 mm︱y-travel 240 mm︱z-axis 120 mm︱w-axis 450 mm︱bore capacity in St 50 - in full material 20 mm︱ 30 cm3/Min︱thread dia. M 20 ︱spindle throat 274 mm︱distance work spindle /surface of the table 560 mm︱table surface area 730 x 280 mm︱table load capacity 200 kg︱turning speed range - stepless 50 - 9200 U/min︱spindle feeds - stepless 0,02 - 0,3 mm/U︱total power requirement 5 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2x2x2.4 m︱
          Precision jig borer for drilling, boring, tapping and milling works with programmable Heidenhain TNC 360. Furthermore, the machine has electronically variable spindle speeds with 6 programmable spindle speeds, quick change tool change system SF 32, motorized vertical adjustment of sindle head (W-axis) with 3 programmable positions, COMPOUND TABLE Model KS 300. Accessories: Coolant, swivel tool table. Machine in e x c e l l e n t condition
            spindle diameter 70 mm
            x-travel 420 mm
            y-travel 240 mm
            z-axis 120 mm
            w-axis 450 mm
            bore capacity in St 50 - in full. 20 mm
            30 cm3/Min
            thread dia. M 20
            spindle throat 274 mm
            distance work spindle /surface o. 560 mm
            table surface area 730 x 280 mm
            table load capacity 200 kg
            turning speed range - stepless 50 - 9200 U/min
            spindle feeds - stepless 0,02 - 0,3 mm/U
            total power requirement 5 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2x2x2.4 m
            Description :
            Precision jig borer for drilling, boring, tapping and milling works with programmable Heidenhain TNC 360. Furthermore, the machine has electronically variable spindle speeds with 6 programmable spindle speeds, quick change tool change system SF 32, motorized vertical adjustment of sindle head (W-axis) with 3 programmable positions, COMPOUND TABLE Model KS 300.

            Accessories: Coolant, swivel tool table.

            Machine in e x c e l l e n t condition
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Профіль торговця: GWM GmbH
          Werkzeugmaschinen

          Зв'язатися з трейдером



            GWM GmbH
          Werkzeugmaschinen

           Gewerbestr. 2
            79639 Grenzach-Wyhlen
            Deutschland
            (0049) 7624 9082 0 "> (0049) 7624 9082 0
            07624 9082-206
            info@gromag.ch
            www.gromag.ch

          Профіль Трейдера

          Як нас знайти


          gromag ag
          Hauptstrasse 9
          CH-8598 Bottighofen

          Телефон: + 41 (0) 31 755 75 75
          Факс: + 41 (0) 31 755 78 96
          E-Mail: info@gromag.ch

           

           




          GWM GmbH Werkzeugmaschinen  79639 Grenzach-Wyhlen Gewerbestr. 2 Deutschland
          GWM GmbH Werkzeugmaschinen

          Gewerbestr. 2



          Contact Trader


            GWM GmbH Werkzeugmaschinen
           Gewerbestr. 2
            79639 Grenzach-Wyhlen
            Deutschland
            (0049) 7624 9082 0
            07624 9082-206
            info@gromag.ch
            www.gromag.ch
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwälzfräs- und Stoßmaschine -kombiniert · Aufspannplatte · Ausdrehkopf · Bandsäge - Automatisch · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Bohr- und Fräsmaschine · Bügelsäge · Bügelsägeautomat · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Entstauber · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Graviermaschine · Handspindelpresse · Härteofen · Härtepresse · Härteprüfer · Karusselldrehmaschine - Einständer · Keilwellenschleifmaschine · Kompressor · Koordinatenbohrmaschine · Koordinatenschleifmaschine · Krananlage · Langdrehautomat · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · Mehrspindelbohrmaschine - mech. vertikal · Nietmaschine · Nuten-Stossmaschine · Nutenziehmaschine · Profilprojektor · Revolver-Drehautomat · Richtpresse - Doppelständer · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtischflachschleifmaschine - Vertikal · Rundtischflächenschleifmaschine - Horiz. · Schnellradialbohrmaschine · Schraubenkompressor · Senkerodiermaschine · Spitzenlose - Rundschleifmaschine · Spritzgiessmaschine bis 1000 KN · Spritzgiessmaschine über 5000 KN · Stangenautomat - Mehrspindel · Stanzautomat - Zweiständer · Ständerbohrmaschine · Sägeblattschärfmaschine · Tafelschere - hydraulisch · Tischbohrmaschine · Tischbohrwerk · Vielkantdrehmaschine · Wasserstrahlschneidanlage · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wärmeofen · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnradentgratmaschine · Zahnradhobelmaschine · Zentrumschleifmaschine ·