'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Goedicke Werkzeugmaschinenhandels GmbH - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe MICROTURN Challenger BNC-3580


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746759 · CNC Lathe

          MICROTURN - Challenger BNC-3580 - - 2010 - FAGOR 8055

          Technical details
          turning diameter mm︱turning length 2000 mm︱control FAGOR 8055 ︱----------------------------------- ︱BASIC FUNCTIONS . ︱ - design principle : flatbed . ︱ - - number of bed guideways 1 ︱ - number of spindles 1 ︱ - number of x/z slides 1 ︱ - number of turrets 1 ︱ - live positions : no . ︱WORKING RANGE TURNING . ︱ - lathe chuck diameter 850 mm︱ - Turning diameter over bed max. 890 mm︱ - Turning diameter over compound slide max. 550 mm︱ - workpiece length (max) 2000 mm︱ - workpiece weight max. 3000 kg︱MAIN SPINDLE . ︱ - spindle bore diameter 350 mm︱ - spindle revolutions (min) 10 /min︱
          Description of condition : CNC Pipe-thread-lathe with big spindle bore diameter. Two chucks on each side ( left and right ) of spindle box. Main chuck: SCHUNK ROTA TB-LH 850-375, 3 jaw chuck. Turning diameter above bed = 890 mm. Turning diameter above cross slide = 550 mm. Working hours = 8750 h, mid November 2022
            turning length 2000 mm
            control FAGOR 8055
            BASIC FUNCTIONS .
            - design principle : flatbed .
            - - number of bed guideways 1
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            - live positions : no .
            WORKING RANGE TURNING .
            - lathe chuck diameter 850 mm
            - Turning diameter over bed ma. 890 mm
            - Turning diameter over compou. 550 mm
            - workpiece length (max) 2000 mm
            - workpiece weight max. 3000 kg
            MAIN SPINDLE .
            - spindle bore diameter 350 mm
            - spindle revolutions (min) 10 /min
            Description :
            Description of condition :

            CNC Pipe-thread-lathe with big spindle bore diameter.
            Two chucks on each side ( left and right ) of spindle box.
            Main chuck: SCHUNK ROTA TB-LH 850-375, 3 jaw chuck.
            Turning diameter above bed = 890 mm.
            Turning diameter above cross slide = 550 mm.

            Working hours = 8750 h, mid November 2022


          Datasheet
          Request / Contact
          used  CNC Lathe MICROTURN Challenger BNC-3080


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746757 · CNC Lathe

          MICROTURN - Challenger BNC-3080 - - 2008 - FAGOR 8055

          Technical details
          turning diameter mm︱turning length 2000 mm︱control FAGOR 8055 ︱----------------------------------- ︱BASIC FUNCTIONS . ︱ - design principle : flatbed . ︱ - number of spindles 1 ︱ - number of x/z slides 1 ︱ - number of turrets 1 ︱WORKING RANGE TURNING . ︱ - lathe chuck diameter 500 mm︱ - Turning diameter over bed max. 760 mm︱ - Turning diameter over compound slide max. 420 mm︱ - workpiece length (max) 2000 mm︱ - workpiece weight max. 3000 kg︱MAIN SPINDLE . ︱ - spindle bore diameter 240 mm︱ - spindle revolutions (min) 10 /min︱ - spindle revolutions (max) 1000 /min︱X/Z SLIDE .
          Technical description : CNC Pipe-thread-lathe with big spindle bore diameter. Two chucks on each side ( left and right ) of spindle box. Main chuck: SCHUNK ROTA EP 500-260, 3 jaw chuck. Turning diameter above bed = 760 mm. Turning diameter above cross slide = 420 mm. Working hours = 16936 h, mid November 2022
            turning length 2000 mm
            control FAGOR 8055
            BASIC FUNCTIONS .
            - design principle : flatbed .
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            WORKING RANGE TURNING .
            - lathe chuck diameter 500 mm
            - Turning diameter over bed ma. 760 mm
            - Turning diameter over compou. 420 mm
            - workpiece length (max) 2000 mm
            - workpiece weight max. 3000 kg
            MAIN SPINDLE .
            - spindle bore diameter 240 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 1000 /min
            X/Z SLIDE .
            Description :
            Technical description :

            CNC Pipe-thread-lathe with big spindle bore diameter.
            Two chucks on each side ( left and right ) of spindle box.
            Main chuck: SCHUNK ROTA EP 500-260, 3 jaw chuck.
            Turning diameter above bed = 760 mm.
            Turning diameter above cross slide = 420 mm.

            Working hours = 16936 h, mid November 2022


          Datasheet
          Request / Contact
          used  CNC Lathe MICROTURN Challenger BNC-3080


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746758 · CNC Lathe

          MICROTURN - Challenger BNC-3080 - - 2008 - FAGOR 8055

          Technical details
          turning diameter mm︱turning length 2000 mm︱control FAGOR 8055 ︱----------------------------------- ︱BASIC FUNCTIONS . ︱ - design principle : flatbed . ︱ - number of spindles 1 ︱ - number of x/z slides 1 ︱ - number of turrets 1 ︱ - live positions : no . ︱WORKING RANGE TURNING . ︱ - lathe chuck diameter 630 mm︱ - Turning diameter over bed max. 760 mm︱ - Turning diameter over compound slide max. 420 mm︱ - workpiece length (max) 2000 mm︱ - workpiece weight max. 3000 kg︱MAIN SPINDLE . ︱ - spindle bore diameter 240 mm︱ - spindle revolutions (min) 10 /min︱ - spindle revolutions (max) 1000 /min︱
          Technical description : CNC Pipe-thread-lathe with big spindle bore diameter. Two manual clamping chucks on each side ( left and right ) of spindle box. Main chuck: SCHUNK ROTA S-PLUS 630-252, 3 jaw chuck. Turning diameter above bed = 760 mm. Turning diameter above cross slide = 420 mm. Working hours = 14050 h, mid November 2022
            turning length 2000 mm
            control FAGOR 8055
            BASIC FUNCTIONS .
            - design principle : flatbed .
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            - live positions : no .
            WORKING RANGE TURNING .
            - lathe chuck diameter 630 mm
            - Turning diameter over bed ma. 760 mm
            - Turning diameter over compou. 420 mm
            - workpiece length (max) 2000 mm
            - workpiece weight max. 3000 kg
            MAIN SPINDLE .
            - spindle bore diameter 240 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 1000 /min
            Description :
            Technical description :

            CNC Pipe-thread-lathe with big spindle bore diameter.
            Two manual clamping chucks on each side ( left and right ) of spindle box.
            Main chuck: SCHUNK ROTA S-PLUS 630-252, 3 jaw chuck.
            Turning diameter above bed = 760 mm.
            Turning diameter above cross slide = 420 mm.

            Working hours = 14050 h, mid November 2022


          Datasheet
          Request / Contact
          used  CNC Lathe PITTLER PV SL 1/1-1


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-734298 · CNC Lathe

          PITTLER - PV SL 1/1-1 - - 1999 - SIEMENS SINUMERIK 840 C

          Technical details
          turning diameter mm︱turning length mm︱control SIEMENS SINUMERIK 840 C ︱----------------------------------- ︱WORKING RANGE TURNING . ︱ - swing diameter (max) 300 mm︱MAIN SPINDLE . ︱ - spindle revolutions (min) 28 /min︱ - spindle revolutions (max) 7000 /min︱ - torque (max.) 188 Nm︱X/Z SLIDE . ︱ - x-axis traverse 920 mm︱ - traverse velocity z (min) 0 mm/min︱ - traverse velocity z (max) 24000 mm/min︱ - traverse velocity x (min) 0 mm/min︱ - traverse velocity x (max) 40000 mm/min︱ - cutting force 8 kN︱X SLIDE . ︱ - traverse velocity x (min) 0 mm/min︱ - traverse velocity x (max) 40000 mm/min︱
          Technical description : Vertical self loading CNC lathe
            control SIEMENS SINUMERIK 840 C
            WORKING RANGE TURNING .
            - swing diameter (max) 300 mm
            MAIN SPINDLE .
            - spindle revolutions (min) 28 /min
            - spindle revolutions (max) 7000 /min
            - torque (max.) 188 Nm
            X/Z SLIDE .
            - x-axis traverse 920 mm
            - traverse velocity z (min) 0 mm/min
            - traverse velocity z (max) 24000 mm/min
            - traverse velocity x (min) 0 mm/min
            - traverse velocity x (max) 40000 mm/min
            - cutting force 8 kN
            X SLIDE .
            - traverse velocity x (min) 0 mm/min
            - traverse velocity x (max) 40000 mm/min
            Description :
            Technical description :

            Vertical self loading CNC lathe


          Datasheet
          Request / Contact
          used  CNC Lathe PITTLER PV SL 1/2-2


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-734309 · CNC Lathe

          PITTLER - PV SL 1/2-2 - - 1998 - SIEMENS SINUMERIK 840 C

          Technical details
          turning diameter 300 mm︱turning length mm︱control SIEMENS SINUMERIK 840 C ︱----------------------------------- ︱WORKING RANGE TURNING . ︱ - turning diameter (max) 300 mm︱MAIN SPINDLE . ︱ - spindle bore diameter 170 mm︱ - spindle revolutions (min) 28 /min︱ - spindle revolutions (max) 7000 /min︱ - torque (max.) 188 Nm︱X SLIDE . ︱ - traverse velocity x (min) 0 mm/min︱ - traverse velocity x (max) 40000 mm/min︱ELECTRICAL SPECIFICATIONS . ︱ - mains power supply 102 kVA︱ - mains voltage 400 V︱ - mains frequency 50 Hz︱DIMENSIONS / WEIGHTS . ︱ - total height 2900 mm︱
            turning diameter 300 mm
            control SIEMENS SINUMERIK 840 C
            WORKING RANGE TURNING .
            - turning diameter (max) 300 mm
            MAIN SPINDLE .
            - spindle bore diameter 170 mm
            - spindle revolutions (min) 28 /min
            - spindle revolutions (max) 7000 /min
            - torque (max.) 188 Nm
            X SLIDE .
            - traverse velocity x (min) 0 mm/min
            - traverse velocity x (max) 40000 mm/min
            ELECTRICAL SPECIFICATIONS .
            - mains power supply 102 kVA
            - mains voltage 400 V
            - mains frequency 50 Hz
            DIMENSIONS / WEIGHTS .
            - total height 2900 mm
          Datasheet
          Request / Contact
          used  CNC Lathe EMAG VSC 200


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-734330 · CNC Lathe

          EMAG - VSC 200 - - 1996 - SIEMENS 840 C

          Technical details
          turning diameter 260 mm︱turning length 200 mm︱control SIEMENS 840 C ︱----------------------------------- ︱WORKING RANGE TURNING . ︱ - turning diameter (max) 260 mm︱ - workpiece length (max) 200 mm︱ - workpiece weight max. 50 kg︱MAIN SPINDLE . ︱ - spindle bore diameter 50 mm︱ - spindle revolutions (min) 10 /min︱ - spindle revolutions (max) 6000 /min︱ - torque (max.) 460 Nm︱ - spindle diameter 100 mm︱ELECTRICAL SPECIFICATIONS . ︱ - total power consumption 30 kW︱ - mains power supply 40 kVA︱ - mains voltage 400 V︱ - mains frequency 50 Hz︱DIMENSIONS / WEIGHTS .
            turning diameter 260 mm
            turning length 200 mm
            control SIEMENS 840 C
            WORKING RANGE TURNING .
            - turning diameter (max) 260 mm
            - workpiece length (max) 200 mm
            - workpiece weight max. 50 kg
            MAIN SPINDLE .
            - spindle bore diameter 50 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 6000 /min
            - torque (max.) 460 Nm
            - spindle diameter 100 mm
            ELECTRICAL SPECIFICATIONS .
            - total power consumption 30 kW
            - mains power supply 40 kVA
            - mains voltage 400 V
            - mains frequency 50 Hz
            DIMENSIONS / WEIGHTS .
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine SMTCL Z 3080 x 25


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729439 · Radial Drilling Machine

          SMTCL - Z 3080 x 25 - - 2008 -

          Technical details
          bore capacity in steel (diameter) 80 mm︱arm length 2500 mm︱workpiece height max. mm︱----------------------------------- ︱WORKING RANGE -BORING- . ︱ - drilling capacity full bore (steel) 80 mm︱ - throat (max) 2500 mm︱ - horizontal travel 2000 mm︱ - vertical travel 1000 mm︱ - sleeve stroke 450 mm︱WORKING SPINDLE / HEAD . ︱ - spindle revolutions (min) 16 /min︱ - spindle revolutions (max) 1250 /min︱ - number of gears 16 ︱ - spindle diameter 104 mm︱ - taper fixture : MK 6 . ︱ - drive power (max) 7.5 kW︱ - max. distance spindle ... clamping surface 2000 mm︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱
          Attachments : - Angular Table 1000 x 800 x 800 - Coolant Device Description of condition : SHOWROOM MACHINE
            bore capacity in steel (diameter. 80 mm
            arm length 2500 mm
            WORKING RANGE -BORING- .
            - drilling capacity full bore . 80 mm
            - throat (max) 2500 mm
            - horizontal travel 2000 mm
            - vertical travel 1000 mm
            - sleeve stroke 450 mm
            WORKING SPINDLE / HEAD .
            - spindle revolutions (min) 16 /min
            - spindle revolutions (max) 1250 /min
            - number of gears 16
            - spindle diameter 104 mm
            - taper fixture : MK 6 .
            - drive power (max) 7.5 kW
            - max. distance spindle ... cl. 2000 mm
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            Description :
            Attachments :

            - Angular Table 1000 x 800 x 800
            - Coolant Device


            Description of condition :

            SHOWROOM MACHINE


          Datasheet
          Request / Contact
          used  Radial Drilling Machine SMTCL Z 30100 x 31


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729437 · Radial Drilling Machine

          SMTCL - Z 30100 x 31 - - 2008 -

          Technical details
          bore capacity in steel (diameter) 100 mm︱arm length 3150 mm︱workpiece height max. mm︱----------------------------------- ︱WORKING RANGE -BORING- . ︱ - drilling capacity full bore (steel) 100 mm︱ - throat (max) 3150 mm︱ - horizontal travel 2600 mm︱ - vertical travel 1250 mm︱ - sleeve stroke 500 mm︱WORKING SPINDLE / HEAD . ︱ - spindle revolutions (min) 8 /min︱ - spindle revolutions (max) 1000 /min︱ - number of gears 16 ︱ - spindle diameter 112 mm︱ - taper fixture : MK 6 . ︱ - drive power (max) 15 kW︱ - max. distance spindle ... clamping surface 2500 mm︱TABLE . ︱ - clamping surface (left-right) 1250 mm︱
          Technical description : Very sturdy and solid Radial Drilling Machine with a column diameter of 700mm and 16 forward-feed stages of 0,06-3,20 mm/rpm Electrical height adjustment und hydro mechanical clamping of the extension arm. Electromechanical rpm changer via preselection wheel and selector lever Attachments : Cubical table 1250 x 800 x 800 mm Coolant device Description of condition : Mint show room condition machine .
            bore capacity in steel (diameter. 100 mm
            arm length 3150 mm
            WORKING RANGE -BORING- .
            - drilling capacity full bore . 100 mm
            - throat (max) 3150 mm
            - horizontal travel 2600 mm
            - vertical travel 1250 mm
            - sleeve stroke 500 mm
            WORKING SPINDLE / HEAD .
            - spindle revolutions (min) 8 /min
            - spindle revolutions (max) 1000 /min
            - number of gears 16
            - spindle diameter 112 mm
            - taper fixture : MK 6 .
            - drive power (max) 15 kW
            - max. distance spindle ... cl. 2500 mm
            TABLE .
            - clamping surface (left-right. 1250 mm
            Description :
            Technical description :

            Very sturdy and solid Radial Drilling Machine with a column diameter of 700mm and 16 forward-feed stages of 0,06-3,20 mm/rpm
            Electrical height adjustment und hydro mechanical clamping of the extension arm.
            Electromechanical rpm changer via preselection wheel and selector lever


            Attachments :

            Cubical table 1250 x 800 x 800 mm
            Coolant device


            Description of condition :

            Mint show room condition machine .


          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column WALDRICH COBURG MULTITEC 2500 AP


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739597 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - MULTITEC 2500 AP - - 2002 - SIEMENS 840 D

          Technical details
          x-travel 4000 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Controls SIEMENS 840 D ︱----------------------------------- ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 4000 mm︱ - y-axis traverse 3500 mm︱ - z-axis traverse 1500 mm︱ - w-axis traverse 1500 mm︱PORTAL / BRIDGE . ︱ - distance between columns 2500 mm︱TABLE . ︱ - clamping surface (left-right) 3000 mm︱ - clamping surface (front-back) 2000 mm︱ - workpiece load (max) 10000 kg︱WORKING SPINDLE / HEAD . ︱ - spindle type : vertical . ︱ - spindle revolutions (min) 5 /min︱ - spindle revolutions (max) 6000 /min︱
          Technical description : Planer Type Milling Center with tool changing system and one second table plate.
            x-travel 4000 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Controls SIEMENS 840 D
            WORKING RANGE -MILLING- .
            - x-axis traverse 4000 mm
            - y-axis traverse 3500 mm
            - z-axis traverse 1500 mm
            - w-axis traverse 1500 mm
            PORTAL / BRIDGE .
            - distance between columns 2500 mm
            TABLE .
            - clamping surface (left-right. 3000 mm
            - clamping surface (front-back. 2000 mm
            - workpiece load (max) 10000 kg
            WORKING SPINDLE / HEAD .
            - spindle type : vertical .
            - spindle revolutions (min) 5 /min
            - spindle revolutions (max) 6000 /min
            Description :
            Technical description :

            Planer Type Milling Center with tool changing system and one second table plate.


          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH SIEGEN POWERTEC 4000 AP


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739559 · Planer-Type Milling M/C - Double Column

          WALDRICH SIEGEN - POWERTEC 4000 AP - - 1995 - SIEMENS 840 C

          Technical details
          x-travel 14000 mm︱y-travel 5000 mm︱z-travel 1500 mm︱Controls SIEMENS 840 C ︱----------------------------------- ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 14000 mm︱ - y-axis traverse 5000 mm︱ - z-axis traverse 1500 mm︱ - w-axis traverse 3000 mm︱PORTAL / BRIDGE . ︱ - Passage height 4500 mm︱ - distance between columns 4000 mm︱TABLE . ︱ - clamping surface (left-right) 9000 mm︱ - clamping surface (front-back) 3000 mm︱ - workpiece load (max) 100000 kg︱WORKING SPINDLE / HEAD . ︱ - spindle type : vertical . ︱ - spindle revolutions (min) 2 /min︱
          Technical description : PLANER TYPE MACHINING CENTER – EACH WITH 3 PALLETS 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth One additional drilling extension SE 350C plus 1 SE500C. Description of condition : In 2011/2012 these 2 identical machines were retrofitted and rebuilt by WALDRICH COBURG. The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment. VIDEO: https://youtu.be/1QQV0A5vzf0
            x-travel 14000 mm
            y-travel 5000 mm
            z-travel 1500 mm
            Controls SIEMENS 840 C
            WORKING RANGE -MILLING- .
            - x-axis traverse 14000 mm
            - y-axis traverse 5000 mm
            - z-axis traverse 1500 mm
            - w-axis traverse 3000 mm
            PORTAL / BRIDGE .
            - Passage hei. 4500 mm
            - distance between columns 4000 mm
            TABLE .
            - clamping surface (left-right. 9000 mm
            - clamping surface (front-back. 3000 mm
            - workpiece load (max) 100000 kg
            WORKING SPINDLE / HEAD .
            - spindle type : vertical .
            - spindle revolutions (min) 2 /min
            Description :
            Technical description :

            PLANER TYPE MACHINING CENTER – EACH WITH 3 PALLETS 9000 x 3000 mm:
            - Tool changer with 420 tools
            - Head pick-up system
            - Video monitoring via camera
            - High pressure lubrication unit for inner cooling 70bar

            AVAILABLE HEAD UNITS:
            - Fixed angle head HS800C600 105 Kw 600 long
            - Fixed angle head HSD350C850 50 Kw 850 long
            - Fixed angle head HSD 40C880 12 Kw 880 long
            - Fixed angle head HSD 190C1000 30 Kw 1000 long
            - Vertical spindle unit VS800C 105 Kw 900 long
            - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
            - Angle spindle unit SO800C905 - 22,5° fix
            - Angle spindle unit HSE1200CS -25° fix
            - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth

            One additional drilling extension SE 350C plus 1 SE500C.


            Description of condition :

            In 2011/2012 these 2 identical machines were retrofitted and rebuilt by WALDRICH COBURG.
            The milling length was extended to 14meters and an automatic changing system for table pallets was installed.
            Both machines can be seen under power by prior appointment.

            VIDEO: https://youtu.be/1QQV0A5vzf0


          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH COBURG POWERTEC 4000 AP


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-740868 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - POWERTEC 4000 AP - - 1995 - SIEMENS 840 C

          Technical details
          x-travel 14000 mm︱y-travel 5000 mm︱z-travel 1500 mm︱Controls SIEMENS 840 C ︱----------------------------------- ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 14000 mm︱ - y-axis traverse 5000 mm︱ - z-axis traverse 1500 mm︱ - w-axis traverse 3000 mm︱PORTAL / BRIDGE . ︱ - Passage height 4500 mm︱ - distance between columns 4000 mm︱TABLE . ︱ - clamping surface (left-right) 9000 mm︱ - clamping surface (front-back) 3000 mm︱ - workpiece load (max) 100000 kg︱WORKING SPINDLE / HEAD . ︱ - spindle type : vertical . ︱ - spindle revolutions (min) 2 /min︱
          Technical description : PLANER TYPE MACHINING CENTER WITH 2 PALLETS 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEADUNITS: - Fixed angle head HS800C600 105 kW 600 long - Fixed angle head HSD350C850 50 kW 850 long - Fixed angle head HSD 40C880 12 kW 880 long - Fixed angle head HSD 190C1000 30 kW 1000 long - Vertical spindle unit VS800C 105 kW 900 long - Universal spindle unit USIO40C 20 kW B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 kW 1/2° Hirth One additional drilling extension SE 350C plus 1 SE500C. Description of condition : both identical machines are retrofitted by WALDRICH COBURG in 2011. The x travel was extended to totally 14.000 mm. A pallet changing system was installed. Both machines are under power and can be inspected by appointment. VIDEO: https://youtu.be/1QQV0A5vzf0
            x-travel 14000 mm
            y-travel 5000 mm
            z-travel 1500 mm
            Controls SIEMENS 840 C
            WORKING RANGE -MILLING- .
            - x-axis traverse 14000 mm
            - y-axis traverse 5000 mm
            - z-axis traverse 1500 mm
            - w-axis traverse 3000 mm
            PORTAL / BRIDGE .
            - Passage hei. 4500 mm
            - distance between columns 4000 mm
            TABLE .
            - clamping surface (left-right. 9000 mm
            - clamping surface (front-back. 3000 mm
            - workpiece load (max) 100000 kg
            WORKING SPINDLE / HEAD .
            - spindle type : vertical .
            - spindle revolutions (min) 2 /min
            Description :
            Technical description :

            PLANER TYPE MACHINING CENTER WITH 2 PALLETS 9000 x 3000 mm:
            - Tool changer with 420 tools
            - Head pick-up system
            - Video monitoring via camera
            - High pressure lubrication unit for inner cooling 70bar

            AVAILABLE HEADUNITS:
            - Fixed angle head HS800C600 105 kW 600 long
            - Fixed angle head HSD350C850 50 kW 850 long
            - Fixed angle head HSD 40C880 12 kW 880 long
            - Fixed angle head HSD 190C1000 30 kW 1000 long
            - Vertical spindle unit VS800C 105 kW 900 long
            - Universal spindle unit USIO40C 20 kW B-axis rotatable at 1° at a time
            - Angle spindle unit SO800C905 - 22,5° fix
            - Angle spindle unit HSE1200CS -25° fix
            - Universal spindle unit (fork milling) USP475C 75 kW 1/2° Hirth

            One additional drilling extension SE 350C plus 1 SE500C.


            Description of condition :

            both identical machines are retrofitted by WALDRICH COBURG in 2011.
            The x travel was extended to totally 14.000 mm.
            A pallet changing system was installed.
            Both machines are under power and can be inspected by appointment.


            VIDEO: https://youtu.be/1QQV0A5vzf0


          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine SORALUCE FP 6000


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746688 · Travelling column milling machine

          SORALUCE - FP 6000 - - 2009 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱Controls HEIDENHAIN iTNC 530 ︱----------------------------------- ︱BASIC DESIGN . ︱ - basic design : travelling column . ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 6000 mm︱ - y-axis traverse 2100 mm︱ - z-axis traverse 1500 mm︱FLOOR PLATE . ︱ - clamping surface (left-right) 7000 mm︱ - clamping surface (front-back) 2000 mm︱WORKING SPINDLE / HEAD . ︱ - spindle type : orthogonal head . ︱ - tilting range 360 °︱ - - mode of operation : automatic . ︱ - - positioning/indexing 1 °︱ - tilting range (2nd axis) 270 °︱
          Technical description : Traveling column milling machine with Heidenhain TNC530 control, coolant system, chip conveyor and STOLLE floor plate area 7000 mm length and by 2000 mm width (valued at Euro 20.000 is included). - NOTE: The clamping table, the clamping angle, are NOT included in the scope of delivery. Those optionals can be purchased separately at following EXW ex works prices ANGLE PLATE Euro 5.000,-- PER UNIT CUBE FOR CLAMPING EURO 2.000,--
            x-travel 6000 mm
            y-travel 2100 mm
            z-travel 1500 mm
            Controls HEIDENHAIN iTNC 530
            BASIC DESIGN .
            - basic design : travelling co. .
            WORKING RANGE -MILLING- .
            - x-axis traverse 6000 mm
            - y-axis traverse 2100 mm
            - z-axis traverse 1500 mm
            FLOOR PLATE .
            - clamping surface (left-right. 7000 mm
            - clamping surface (front-back. 2000 mm
            WORKING SPINDLE / HEAD .
            - spindle type : orthogonal he. .
            - tilting range 360 °
            - - mode of operation : automa. .
            - - positioning/indexing 1 °
            - tilting range (2nd axis) 270 °
            Description :
            Technical description :

            Traveling column milling machine with Heidenhain TNC530 control, coolant system, chip conveyor and STOLLE floor plate area 7000 mm length and by 2000 mm width (valued at Euro 20.000 is included).

            - NOTE: The clamping table, the clamping angle, are NOT included in the scope of delivery.

            Those optionals can be purchased separately at following EXW ex works prices

            ANGLE PLATE Euro 5.000,-- PER UNIT
            CUBE FOR CLAMPING EURO 2.000,--


          Datasheet
          Request / Contact

          Spotting Press

          used  Spotting Press REIS TUS 400-250


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746831 · Spotting Press

          REIS - TUS 400-250 - - 2013 - SIEMENS SIMATIC C7

          Technical details
          pressure 250 t︱table length 4000 mm︱table width 3000 mm︱Controls SIEMENS SIMATIC C7 ︱----------------------------------- ︱PRESS DESIGN . ︱ - frame design : 4 column . ︱ - moving bolster : yes . ︱PRESS FORCES . ︱ - total force (nominal) 250 to︱PRESS TABLE . ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 3000 mm︱RAM . ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 3000 mm︱RAM (HYDR. PRESS) . ︱ - number of main-cylinders 1 ︱ - approximation velocity max. 50 mm/s︱ - restoring force of ram 85 to︱
          Technical description : HYDRAULIC PRESS FOR DIE SPOTTING IN 4-COLUMN DESIGN - Moving bolster with max. 100 ton payload - Swivel carriage with max. 50 ton payload - Swivel area 180° - Table area 4000 x 3000 mms - SICK Light barrier in the swivelling area Please note that our modern REIS TUS 400-250 is a very hard to find (pre-owned machine) being in such an exceptional beautiful condition, sparingly used and having been regularly serviced. Here once again we wish to draw up the features of our REIS: - 250ton RAM force and max. table payload 100 ton, whereby 50ton max. payload RAM plate. - Table drives out from the front and the ram tilts down on the rear side until floor- level. - Our REIS has a modern ‚S 7 Control‘ - Our REIS originates from a very clean and modern German Company Videolink https://youtu.be/34BV4Z3Vvto
            pressure 250 t
            table length 4000 mm
            table width 3000 mm
            Controls SIEMENS SIMATIC C7
            PRESS DESIGN .
            - frame design : 4 column .
            - moving bolster : yes .
            PRESS FORCES .
            - total force (nominal) 250 to
            PRESS TABLE .
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 3000 mm
            RAM .
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 3000 mm
            RAM (HYDR. PRESS) .
            - number of main-cylinders 1
            - approximation velocity max. 50 mm/s
            - restoring force of ram 85 to
            Description :
            Technical description :

            HYDRAULIC PRESS FOR DIE SPOTTING IN 4-COLUMN DESIGN
            - Moving bolster with max. 100 ton payload
            - Swivel carriage with max. 50 ton payload
            - Swivel area 180°
            - Table area 4000 x 3000 mms
            - SICK Light barrier in the swivelling area

            Please note that our modern REIS TUS 400-250 is a very hard to find (pre-owned machine) being in such an exceptional beautiful condition, sparingly used and having been regularly serviced.

            Here once again we wish to draw up the features of our REIS:
            - 250ton RAM force and max. table payload 100 ton, whereby 50ton max. payload RAM plate.
            - Table drives out from the front and the ram tilts down on the rear side until floor- level.
            - Our REIS has a modern ‚S 7 Control‘
            - Our REIS originates from a very clean and modern German Company

            Videolink
            https://youtu.be/34BV4Z3Vvto


          Datasheet
          Request / Contact

          Band Straightening Machine

          used  Band Straightening Machine SCHULER SMG


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-742130 · Band Straightening Machine

          SCHULER SMG - - - 2004 -

          Technical details
          band width 1050 mm︱plate thickness 8 mm︱number of rolls 8 ︱----------------------------------- ︱DECOILER . ︱ - design : single coil . ︱ - sheet width max 1050 mm︱ - sheet width (min) 150 mm︱ - max. weight of coil 22 to︱ - max. diameter of coil 2000 mm︱ - min. internal diameter of coil 570 mm︱FEEDERS . ︱ - feeder: type : roll feeder . ︱ - sheet width max 1050 mm︱ - sheet thickness max 150 mm︱LEVELER UNIT . ︱ - sheet width max 1050 mm︱ - sheet width (min) 150 mm︱ - sheet thickness max 8 mm︱ - sheet thickness (min) 2.5 mm︱
          Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOADING CAR - HSK-280-1050 DECOILER HASP - SHF 8-96 / 160-1050 SHEET METAL STRAIGHTENER - ADCH 1050-8 TRANSVERSE CUTTING UNIT This unit does not require any BENDING PIT, because of being of short structural form .
            band width 1050 mm
            plate thickness 8 mm
            number of rolls 8
            DECOILER .
            - design : single coil .
            - sheet width max 1050 mm
            - sheet width (min) 150 mm
            - max. weight of coil 22 to
            - max. diameter of coil 2000 mm
            - min. internal diameter of co. 570 mm
            FEEDERS .
            - feeder: type : roll feeder .
            - sheet width max 1050 mm
            - sheet thickness max 150 mm
            LEVELER UNIT .
            - sheet width max 1050 mm
            - sheet width (min) 150 mm
            - sheet thickness max 8 mm
            - sheet thickness (min) 2.5 mm
            Description :
            Technical description :

            Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:

            - LAWECO COIL LOADING CAR
            - HSK-280-1050 DECOILER HASP
            - SHF 8-96 / 160-1050 SHEET METAL STRAIGHTENER
            - ADCH 1050-8 TRANSVERSE CUTTING UNIT

            This unit does not require any BENDING PIT, because of being of short structural form .


          Datasheet
          Request / Contact

          coil line

          used  coil line AMTEC PBS 24/24


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729197 · coil line

          AMTEC - PBS 24/24 - - 1994 -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - total power consumption 30 kW︱ - mains voltage 500 V︱ - mains frequency 50 Hz︱
          Technical description : This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks. The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed. The effluence rate of the spray valves for top and bottom side can be adjusted individually. A heating device facilitates the processing with high viscosity lubricants. - Year of Manufacture: December 1994 - Max. Blank length: 1800mm - Max. Blank width: 2500mm - Medium emulsion, oil, grease
            - total power consumption 30 kW
            - mains voltage 500 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks.
            The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed.
            The effluence rate of the spray valves for top and bottom side can be adjusted individually.
            A heating device facilitates the processing with high viscosity lubricants.

            - Year of Manufacture: December 1994
            - Max. Blank length: 1800mm
            - Max. Blank width: 2500mm
            - Medium emulsion, oil, grease


          Datasheet
          Request / Contact
          used  coil line SCHARF WESTFALIA


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739033 · coil line

          SCHARF WESTFALIA - - - -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 2050 mm︱ - rotation 360 °︱ - - rotation speed 1.3 /min︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱ - mains frequency 50 Hz︱
          Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 2050 mm
            - rotation 360 °
            - - rotation speed 1.3 /min
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            Blank Pallet Turnover Device / Blank Handlling (needs retrofit)


          Datasheet
          Request / Contact

          Strip Straightening Machine

          used  Strip Straightening Machine MÜLLER WEINGARTEN


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-740263 · Strip Straightening Machine

          MÜLLER WEINGARTEN - - - - SIEMENS S7

          Technical details
          sheet width 2000 mm︱plate thickness 1.8 mm︱cutting lenght mm︱Controls SIEMENS S7 ︱----------------------------------- ︱PRESS DESIGN . ︱ - frame design : H-frame . ︱ - openings in uprights : yes . ︱ - opening in table : yes . ︱ - moving bolster : yes . ︱PRESS TABLE . ︱ - clamping surface (left-right) 2800 mm︱ - clamping surface (front-back) 2800 mm︱ - height above floor level 375 mm︱RAM . ︱ - ram force 800 to︱ - clamping surface (left-right) 2800 mm︱ - clamping surface (front-back) 2800 mm︱ - stroke 350 mm︱ - number of strokes max 55 /min︱
          Technical description : SCOPE OF DELIVERY/ COMPONENTS: - Coil carrier with separate crop shear - single sided de-coiler, - max coil width 2000mm, max weight 30tons - Two exchangeable straightening units ( cassette type ) with 13 straightening rolls, max blank thickness 1.8mm, max. blank width 2000mm - Loop pit - Roll feeder with roll diameter 220 mm, feed length max 4000mm - Monitoring of oil film thickness via scanner - Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983) * with max. 55 strokes per minute * Table dimensions (clamping surface 2800 x 2800 mm * 2 Changing tables and 350mm stroke travel - FIRST NSM Blank de-stacker unit with 2 unloading stations - Max. blank dimensions 4000 x 2000mm - Conveyance speed 30 - 150 meters per minute - Packet weight max. 12000 kgs - Packet height max. 650 mm. (On this part finishing for side panel cutouts via controlled dies) - SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks. - max. size 1650 x 800 mm - max. heigth with pallet = 450 mm. PERFORMANCE: 240 to 270 tons cut blanks per day in a 3 shift operation Description of condition : Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable. Video at: https://www.youtube.com/watch?v=1_gz2WxMMO0&feature=youtu.be The complete conveyor system was revised in 2011: - SEW and Siemens components electronically synchronized: NEW - Cardan shafts of the straightening system: NEW - Hinge side guide: Optimized - Complete electrics and electronics (S7): NEW - Drive block of the press: • BEFORE: grease lubrication • NOW: Circulating oil lubrication Also: NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max. blank dimensions of 1650 x 800 mm. = COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.
            sheet width 2000 mm
            plate thickness 1.8 mm
            Controls SIEMENS S7
            PRESS DESIGN .
            - frame design : H-frame .
            - openings in uprights : yes .
            - opening in table : yes .
            - moving bolster : yes .
            PRESS TABLE .
            - clamping surface (left-right. 2800 mm
            - clamping surface (front-back. 2800 mm
            - height above floor level 375 mm
            RAM .
            - ram force 800 to
            - clamping surface (left-right. 2800 mm
            - clamping surface (front-back. 2800 mm
            - stroke 350 mm
            - number of strokes max 55 /min
            Description :
            Technical description :

            SCOPE OF DELIVERY/ COMPONENTS:
            - Coil carrier with separate crop shear
            - single sided de-coiler,
            - max coil width 2000mm, max weight 30tons
            - Two exchangeable straightening units ( cassette type ) with 13 straightening rolls,
            max blank thickness 1.8mm, max. blank width 2000mm
            - Loop pit
            - Roll feeder with roll diameter 220 mm, feed length max 4000mm
            - Monitoring of oil film thickness via scanner
            - Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983)
            * with max. 55 strokes per minute
            * Table dimensions (clamping surface 2800 x 2800 mm
            * 2 Changing tables
            and 350mm stroke travel

            - FIRST NSM Blank de-stacker unit with 2 unloading stations
            - Max. blank dimensions 4000 x 2000mm
            - Conveyance speed 30 - 150 meters per minute
            - Packet weight max. 12000 kgs
            - Packet height max. 650 mm.
            (On this part finishing for side panel cutouts via controlled dies)

            - SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks.
            - max. size 1650 x 800 mm
            - max. heigth with pallet = 450 mm.

            PERFORMANCE:
            240 to 270 tons cut blanks per day in a 3 shift operation


            Description of condition :

            Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable.

            Video at: https://www.youtube.com/watch?v=1_gz2WxMMO0&feature=youtu.be

            The complete conveyor system was revised in 2011:
            - SEW and Siemens components electronically synchronized: NEW
            - Cardan shafts of the straightening system: NEW
            - Hinge side guide: Optimized
            - Complete electrics and electronics (S7): NEW
            - Drive block of the press:
            • BEFORE: grease lubrication
            • NOW: Circulating oil lubrication

            Also:
            NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max. blank dimensions of 1650 x 800 mm.

            = COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.


          Datasheet
          Request / Contact

          Adjusting Instrument

          used  Adjusting Instrument ZOLLER Venturion 800/12


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-746503 · Adjusting Instrument

          ZOLLER - Venturion 800/12 - - 2008 -

          Technical details
          longitudinal travel mm︱cross travel mm︱table length mm︱
          Technical description : Tool length max: 1200 mm
            Description :
            Technical description :

            Tool length max: 1200 mm


          Datasheet
          Request / Contact

          Clamping Cube

          used  Clamping Cube


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739182 · Clamping Cube

          - - - -

          Technical details
          length mm︱width mm︱height mm︱----------------------------------- ︱ - space requirements length 600 mm︱ - space requirements width 500 mm︱ - total height 400 mm︱
            - space requirements length 600 mm
            - space requirements width 500 mm
            - total height 400 mm
          Datasheet
          Request / Contact
          used  Clamping Cube .


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-727024 · Clamping Cube

          . - - - -

          Technical details
          length mm︱width mm︱height mm︱
          Datasheet
          Request / Contact
          used  Clamping Cube .


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-727030 · Clamping Cube

          . - - - -

          Technical details
          length mm︱width mm︱height mm︱
          Datasheet
          Request / Contact
          used  Clamping Cube .


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-727023 · Clamping Cube

          . - - - -

          Technical details
          length mm︱width mm︱height mm︱
          Technical description : 2 Units CLAMPING CUBES 400 x 500 x 800 mm length
            Description :
            Technical description :

            2 Units CLAMPING CUBES
            400 x 500 x 800 mm length


          Datasheet
          Request / Contact
          used  Clamping Cube .


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-727028 · Clamping Cube

          . - - - -

          Technical details
          length mm︱width mm︱height mm︱
          Datasheet
          Request / Contact

          Clamping Table

          used  Clamping Table BOHLE


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-740660 · Clamping Table

          BOHLE - - - -

          Technical details
          table length mm︱table width mm︱table load t︱
          Technical description : CLAMPING/ MOUNTING TABLE - Length 2600mm - Width 1500mm - Height 250mm
            Description :
            Technical description :

            CLAMPING/ MOUNTING TABLE
            - Length 2600mm
            - Width 1500mm
            - Height 250mm


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Goedicke Werkzeugmaschinenhandels GmbH   74172 - Neckarsulm Heinz-Nixdorf-Str. 2 Deutschland
          Goedicke Werkzeugmaschinenhandels GmbH

          Heinz-Nixdorf-Str. 2



          Contact Trader


            Goedicke Werkzeugmaschinenhandels GmbH
           Heinz-Nixdorf-Str. 2
            74172 - Neckarsulm
            Deutschland
            +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
            info@goedicke.com
            www.goedicke.com
            Contact person:

           




          Machine category


          Aufspanntisch · Aufspannwürfel · Bandanlage · Bandricht- und Abschneideanlage · Bandrichtmaschine · Betriebseinrichtung · CNC Drehmaschine · Coilhebeverrichtung · Einstellgerät · Elektronik / SPS-Steuerungen · Fahrständerfräsmaschine · Förderband · Industrieroboter · Industriesauger · Plattenfeld · Portalfräsmaschine · Radialbohrmaschine · Roboter - Handling · Robotersteuerungen · Traktor · Transportwagen · Tuschierpresse · Werkzeugschrank ·