Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          HESSE+CO Maschinenfabrik GesmbH Industriezentrum NÖ-Süd - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe ZMM CU 587


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-915 · Center Lathe

          ZMM - CU 587 - - 2003 -

          Technical details
          gebraucht20031673ca. 2 Wochen ab AuftragseBulgarien26600 €︱ 1580 mm︱ 2000 mm︱ 82 mm︱ 380 mm︱ 450 mm︱ 0,025 - 12 mm/U︱ 0,0125 - 6 mm/U︱ 5 MK︱ 150 mm︱ 11 kW︱ 3700 mm︱ 1500 mm︱ 1700 mm︱
          withbridge 2-axis digital display Fagor Innova 20i-T for X, Y quick change tool post 3-jaw chuck Ø 310 mm 4-jaw chuck Ø 310 mm 4 jaw Face Plate with Ø 350 mm accompanying Lynette small and large standing Lynette coolant pump machine light rapid traverse along and flat User Manual in German COMPLIES WITH THE CURRENT INTUSTRIAL SAFETY REGULATION (AMVO & UVV)
            gebraucht
            2003
            1673
            ca. 2 Wochen ab Auftragse
            Bulgarien
            26600 €
            1
            580 mm
            2000 mm
            82 mm
            380 mm
            450 mm
            0,025 - 12 mm/U
            0,0125 - 6 mm/U
            5 MK
            150 mm
            11 kW
            3700 mm
            1500 mm
            1700 mm
            Description :
            withbridge
            2-axis digital display Fagor Innova 20i-T for X, Y
            quick change tool post
            3-jaw chuck Ø 310 mm
            4-jaw chuck Ø 310 mm
            4 jaw Face Plate with Ø 350 mm
            accompanying Lynette
            small and large standing Lynette
            coolant pump
            machine light
            rapid traverse along and flat
            User Manual in German

            COMPLIES WITH THE CURRENT INTUSTRIAL SAFETY REGULATION (AMVO & UVV)
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 500 MRD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-913 · Center Lathe

          ZMM - CU 500 MRD - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien46020 €︱ 851.37 €︱ 500 mm︱ 1500 mm︱ 250 mm︱ 75 mm︱ 300 mm︱ 400 mm︱ 880 M︱ 325-100; 100-400; 500-2000 U/Min︱ 1200.5 - 120 mm︱ 0.125 - 301 - 240315 mm︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 44.980,- turning length2.000 mm € 47.730,- turning length3.000 mm € 52.320,- turning length4.000 mm € 57.670,- turning length5.000 mm € 71.790,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            46020 €
            851.37 €
            500 mm
            1500 mm
            250 mm
            75 mm
            300 mm
            400 mm
            8
            80 M
            3
            25-100; 100-400; 500-2000 U/Min
            120
            0.5 - 120 mm
            0.125 - 30
            1 - 240
            315 mm
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 44.980,-

            turning length2.000 mm
            € 47.730,-

            turning length3.000 mm
            € 52.320,-

            turning length4.000 mm
            € 57.670,-

            turning length5.000 mm
            € 71.790,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 325 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-911 · Center Lathe

          ZMM - CU 325 RD - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien23130 €︱ 432.53 €︱ 400 mm︱ 750 mm︱ 165 mm︱ 32 mm︱ 190 mm︱ 200 mm︱ 54,5 M︱ 285-405; 470-2200 U/Min︱ 480.1 - 28 mm︱ 0.1 - 1.754 - 70150 mm︱
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 23.450,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            23130 €
            432.53 €
            400 mm
            750 mm
            165 mm
            32 mm
            190 mm
            200 mm
            5
            4,5 M
            2
            85-405; 470-2200 U/Min
            48
            0.1 - 28 mm
            0.1 - 1.75
            4 - 70
            150 mm
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 23.450,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 800 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-931 · Center Lathe

          ZMM - CU 800 RD - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien96010 €︱ 1756.98 €︱ 890 mm︱ 1500 mm︱ 400 mm︱ 155 mm︱ 490 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120525 mm︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 99.430,- turning length3.000 mm € 109.860,- turning length4.000 mm € 117.440,- turning length5.000 mm € 127.880,- turning length6.000 mm € 143.280,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            96010 €
            1756.98 €
            890 mm
            1500 mm
            400 mm
            155 mm
            490 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            525 mm
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 99.430,-

            turning length3.000 mm
            € 109.860,-

            turning length4.000 mm
            € 117.440,-

            turning length5.000 mm
            € 127.880,-

            turning length6.000 mm
            € 143.280,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TMS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-955 · Center Lathe

          ZMM - C 10 TMS - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien77950 €︱ 1426.49 €︱ 760 mm︱ 3000 mm︱ 380 mm︱ 132 mm︱ 520 mm︱ 560 mm︱ 11140 M︱ 37 - 42; 28 - 170; 165 - 1 U/Min︱ 1500.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 452 - 240
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 64.810,- turning length2.000 mm € 67.520,- turning length4.000 mm € 83.710,- turning length5.000 mm € 95.420,- turning length6.000 mm € 108.160,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            77950 €
            1426.49 €
            760 mm
            3000 mm
            380 mm
            132 mm
            520 mm
            560 mm
            11
            140 M
            3
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            2 - 240
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.500 mm
            € 64.810,-

            turning length2.000 mm
            € 67.520,-

            turning length4.000 mm
            € 83.710,-

            turning length5.000 mm
            € 95.420,-

            turning length6.000 mm
            € 108.160,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 THS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-961 · Center Lathe

          ZMM - C 10 THS - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien70610 €︱ 1292.16 €︱ 860 mm︱ 1500 mm︱ 430 mm︱ 135 mm︱ 620 mm︱ 560 mm︱ 11140 M︱ 7 - 42; 28 - 170; 165 - 1 U/Min︱ 1500.5 - 180 mm︱ 60 - 1/6 Gänge/"︱ 0.125 - 45240435 mm︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length2.000 mm € 73.320,- turning length3.000 mm € 83.750,- turning length4.000 mm € 89.510,- turning length5.000 mm € 101.220,- turning length6.000 mm € 113.960,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            70610 €
            1292.16 €
            860 mm
            1500 mm
            430 mm
            135 mm
            620 mm
            560 mm
            11
            140 M
            7 - 42; 28 - 170; 165 - 1 U/Min
            150
            0.5 - 180 mm
            60 - 1/6 Gänge/"
            0.125 - 45
            240
            435 mm
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length2.000 mm
            € 73.320,-

            turning length3.000 mm
            € 83.750,-

            turning length4.000 mm
            € 89.510,-

            turning length5.000 mm
            € 101.220,-

            turning length6.000 mm
            € 113.960,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 11 MCS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-949 · Center Lathe

          ZMM - C 11 MCS - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien50430 €︱ 922.87 €︱ 600 mm︱ 2000 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 320 - 100; 80 - 400; 400 - U/Min︱ 1200,04 - 12 mm/U︱ 0,02 - 6 mm/U︱ 640.5 - 120 mm︱
          In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 47.680,- turning length1.500 mm € 48.720,- turning length3.000 mm € 54.920,- turning length4.000 mm € 60.170,- turning length5.000 mm € 74.190,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            50430 €
            922.87 €
            600 mm
            2000 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100; 80 - 400; 400 - U/Min
            120
            0,04 - 12 mm/U
            0,02 - 6 mm/U
            64
            0.5 - 120 mm
            Description :
            In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.

            It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.

            driven by variable speed control (3 steps)
            3-axes digital readout Fagor with CSS (constant surface speed)
            quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length1.000 mm
            € 47.680,-

            turning length1.500 mm
            € 48.720,-

            turning length3.000 mm
            € 54.920,-

            turning length4.000 mm
            € 60.170,-

            turning length5.000 mm
            € 74.190,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 400 TS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-943 · Center Lathe

          ZMM - C 400 TS - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien37470 €︱ 693.2 €︱ 400 mm︱ 750 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 418-98; 48-265; 144-790; 3 U/Min︱ 80400.25 - 7.5 mm︱ 120 - 4 Gänge/"︱ 0.0625 - 1.875
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.100,- turning length 1.500 mm € 39.030,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            37470 €
            693.2 €
            400 mm
            750 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            4
            18-98; 48-265; 144-790; 3 U/Min
            80
            40
            0.25 - 7.5 mm
            120 - 4 Gänge/"
            0.0625 - 1.875
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 38.100,-

            turning length 1.500 mm
            € 39.030,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1250 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-941 · Center Lathe

          ZMM - CU 1250 RD - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien107970 €︱ 1320 mm︱ 1500 mm︱ 625 mm︱ 155 mm︱ 940 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.5 - 480 mm︱ 1/16 - 60 Gänge/"︱ 0.125 - 1201 - 240685 mm︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 121.620,- turning length4.000 mm € 129.300,- turning lenght 5.000 mm € 139.740,- turning length6.000 mm € 155.140,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            107970 €
            1320 mm
            1500 mm
            625 mm
            155 mm
            940 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.5 - 480 mm
            1/16 - 60 Gänge/"
            0.125 - 120
            1 - 240
            685 mm
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 121.620,-

            turning length4.000 mm
            € 129.300,-

            turning lenght 5.000 mm
            € 139.740,-

            turning length6.000 mm
            € 155.140,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1000 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-935 · Center Lathe

          ZMM - CU 1000 RD - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien101910 €︱ 1090 mm︱ 1500 mm︱ 500 mm︱ 155 mm︱ 690 mm︱ 700 mm︱ 15160 M︱ 43,7 - 15,6; 14,7 - 62; 58 U/Min︱ 1600.5 - 480 mm︱ 60 - 1/16 Gänge/"︱ 0.125 - 120240525 mm︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length3.000 mm € 115.760,- turning length4.000 mm € 123.440,- turning length5.000 mm € 133.780,- turning length6.000 mm € 149.280,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            101910 €
            1090 mm
            1500 mm
            500 mm
            155 mm
            690 mm
            700 mm
            15
            160 M
            4
            3,7 - 15,6; 14,7 - 62; 58 U/Min
            160
            0.5 - 480 mm
            60 - 1/16 Gänge/"
            0.125 - 120
            240
            525 mm
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length3.000 mm
            € 115.760,-

            turning length4.000 mm
            € 123.440,-

            turning length5.000 mm
            € 133.780,-

            turning length6.000 mm
            € 149.280,-
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 630 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-927 · Center Lathe

          ZMM - CU 630 RD - - -

          Technical details
          neuca. 6 Monate ab AuftragseBulgarien55390 €︱ 1013.64 €︱ 630 mm︱ 2000 mm︱ 315 mm︱ 103 mm︱ 430 mm︱ 400 mm︱ 11120 M︱ 316 - 63; 63 - 250; 315 - U/Min︱ 1200.5 - 120 mm︱ 060 - 1/4 Gänge/"︱ 0.125 - 301 - 240
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 52.640,- turning length1.500 mm € 53.680,- turning length3.000 mm € 59.980,- turning length4.000 mm € 65.330,- turning length5.000 mm € 79.450,-
            neu
            ca. 6 Monate ab Auftragse
            Bulgarien
            55390 €
            1013.64 €
            630 mm
            2000 mm
            315 mm
            103 mm
            430 mm
            400 mm
            11
            120 M
            3
            16 - 63; 63 - 250; 315 - U/Min
            120
            0.5 - 120 mm
            060 - 1/4 Gänge/"
            0.125 - 30
            1 - 240
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 52.640,-

            turning length1.500 mm
            € 53.680,-

            turning length3.000 mm
            € 59.980,-

            turning length4.000 mm
            € 65.330,-

            turning length5.000 mm
            € 79.450,-
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C ERLO TF 35


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1236 · Drilling and Milling M/C

          ERLO - TF 35 - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien44560 €︱ 824.36 €︱ 35 mm︱ MK 4390 mm︱ 94- 2.225 (16) 50 Hz 113 U/min︱ 0,9 / 1,5 kW︱ M351660 mm︱ 1510 mm︱ 2600 mm︱ 910 kg︱ 180 mm︱ 190 - 650 mm︱ 1310 mm︱ 125 mm︱ 400 x 420 mm︱
          ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            44560 €
            824.36 €
            35 mm
            MK 4
            390 mm
            94- 2.225 (16) 50 Hz 113 U/min
            0,9 / 1,5 kW
            M35
            1660 mm
            1510 mm
            2600 mm
            910 kg
            180 mm
            190 - 650 mm
            1310 mm
            125 mm
            400 x 420 mm
            Description :
            ERLO (MADE IN SPAIN)

            FOR DEMANDING WORKSHOP USE

            drilling and milling machine
            automatic feed
            precision electromagnetic clutches
            geared drive
            cross table
            fixed base and displaceable headstock
            control panel
            cooling equipment with electric motor pump
            hand wheel for fine tuning
            clamping device for tools
            adjustable stop
            drill guard
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine Unbekannt/Unknown BOHRPOWER BPC 32/1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1214 · Radial Drilling Machine

          Unbekannt/Unknown - BOHRPOWER BPC 32/1000 - - 2017 -

          Technical details
          gebraucht20173900China8490 €︱ 6800 €︱ 132 mm︱ MK 4300 - 1.000 mm︱ 32 - 2.500 (16) U/min︱ 1760 mm︱ 800 mm︱ 2080 mm︱ 1600 kg︱ 530 - 1.000 mm︱ 2.2 kW︱ 240 mm︱ 250 mm︱ 0,75 kW︱
          box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            gebraucht
            2017
            3900
            China
            8490 €
            6800 €
            1
            32 mm
            MK 4
            300 - 1.000 mm
            32 - 2.500 (16) U/min
            1760 mm
            800 mm
            2080 mm
            1600 kg
            530 - 1.000 mm
            2.2 kW
            240 mm
            250 mm
            0,75 kW
            Description :
            box table 600 x 455 x 455 mm
            coolant equipment
            machine lamp
            mechanical clamping for height adjustment and spindle stock
            electr. clamping for arm rotation
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          6.800 €
          Datasheet
          Request / Contact
          used  Radial Drilling Machine TAILIFT BP42/1170EC


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1696 · Radial Drilling Machine

          TAILIFT - BP42/1170EC - - 2011 -

          Technical details
          gebraucht20113960prompt, Zwischenverkauf vTaiwan14200 €︱ 142 mm︱ MK 4280 - 1100 mm︱ 44 - 1.500 (12) U/min︱ M 25 / M 281880 mm︱ 870 mm︱ 2210 mm︱ 2600 kg︱ 470 - 1.270 mm︱ 0,05 - 0,15 (3) mm/min︱ 2.2 kW︱ 280 mm︱
          coolant equipment machine lamp mechanical clamping box table new Repar2 spindle protection HYDRAULIC CLAMPING OF THE COLUMN AND THE ARM User Manual in English COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            2011
            3960
            prompt, Zwischenverkauf v
            Taiwan
            14200 €
            1
            42 mm
            MK 4
            280 - 1100 mm
            44 - 1.500 (12) U/min
            M 25 / M 28
            1880 mm
            870 mm
            2210 mm
            2600 kg
            470 - 1.270 mm
            0,05 - 0,15 (3) mm/min
            2.2 kW
            280 mm
            Description :
            coolant equipment
            machine lamp
            mechanical clamping
            box table
            new Repar2 spindle protection
            HYDRAULIC CLAMPING OF THE COLUMN AND THE ARM
            User Manual in English

            COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO
          Datasheet
          Request / Contact
          used  Radial Drilling Machine Unbekannt/Unknown WMW BR 40/2


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1222 · Radial Drilling Machine

          Unbekannt/Unknown - WMW BR 40/2 - - 1988 -

          Technical details
          gebraucht19883957ca. 4 Wochen ab Auftragse8700 €︱ 45 mm︱ MK 530 - 1.250 mm︱ M362050 mm︱ 930 mm︱ 3200 mm︱ 3850 kg︱ 280 - 1.380 mm︱ 450 - 1.400 mm︱ 360 °︱ 745 mm︱ 1.450 x 920 mm︱ 355 mm︱ 250 Nm︱
          incl. dice table coolant equipment machine light electrical clamping 2 clamping surfaces 8 T-slots user manual in GERMAN Does not comply with the german UVV & austrian AMVO (no spindle protection)
            gebraucht
            1988
            3957
            ca. 4 Wochen ab Auftragse
            8700 €
            45 mm
            MK 5
            30 - 1.250 mm
            M36
            2050 mm
            930 mm
            3200 mm
            3850 kg
            280 - 1.380 mm
            450 - 1.400 mm
            360 °
            745 mm
            1.450 x 920 mm
            355 mm
            250 Nm
            Description :
            incl. dice table
            coolant equipment
            machine light
            electrical clamping
            2 clamping surfaces
            8 T-slots
            user manual in GERMAN Does not comply with the german UVV & austrian AMVO (no spindle protection)
          Datasheet
          Request / Contact
          used  Radial Drilling Machine TAILIFT TPR-920A


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1212 · Radial Drilling Machine

          TAILIFT - TPR-920A - - -

          Technical details
          neuca. 6 Monate ab AuftragseTaiwan16200 €︱ 302.94 €︱ 32 mm︱ MK 4220 - 950 mm︱ 73 - 1.247 (6) U/min︱ Stahl: M 25; Guss: M 321800 mm︱ 830 mm︱ 2190 mm︱ 1250 kg︱ 350 - 1.210 mm︱ 0,05 - 0,15 (3) mm/min︱ 1.5 kW︱ 210 mm︱ 220 mm︱ 1.260 x 640 x 160 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            16200 €
            302.94 €
            32 mm
            MK 4
            220 - 950 mm
            73 - 1.247 (6) U/min
            Stahl: M 25; Guss: M 32
            1800 mm
            830 mm
            2190 mm
            1250 kg
            350 - 1.210 mm
            0,05 - 0,15 (3) mm/min
            1.5 kW
            210 mm
            220 mm
            1.260 x 640 x 160 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with mechanical clamping
            electric height adjustment of extension arm and mechanical clamping
            mechanical clamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used  Radial Drilling Machine TAILIFT TPR-1600H


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1234 · Radial Drilling Machine

          TAILIFT - TPR-1600H - - -

          Technical details
          neuca. 6 Monate ab AuftragseTaiwan48800 €︱ 902.8 €︱ 65 mm︱ MK 5440 - 1.580 mm︱ 40 - 1.920 (12) U/min︱ Stahl/Guß: M50/M602850 mm︱ 1400 mm︱ 2940 mm︱ 4600 kg︱ 380 - 1.600 mm︱ 0,07 - 0,96 (6) mm/min︱ 5.5 kW︱ 432 mm︱ 370 mm︱ 2.480 x 1.050 x 210 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo)
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            48800 €
            902.8 €
            65 mm
            MK 5
            440 - 1.580 mm
            40 - 1.920 (12) U/min
            Stahl/Guß: M50/M60
            2850 mm
            1400 mm
            2940 mm
            4600 kg
            380 - 1.600 mm
            0,07 - 0,96 (6) mm/min
            5.5 kW
            432 mm
            370 mm
            2.480 x 1.050 x 210 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with hydraulic clamping
            electric height adjustment of extension arm andhydraulic clamping
            hydraulicclamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH

            (sample photo)
          Datasheet
          Request / Contact
          used  Radial Drilling Machine TAILIFT TC-1250H


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1228 · Radial Drilling Machine

          TAILIFT - TC-1250H - - -

          Technical details
          neuca. 6 Monate ab AuftragseTaiwan27900 €︱ 516.15 €︱ 50 mm︱ MK 5360 - 1.250 mm︱ 44 - 1.206 (12) U/min︱ Stahl/Guß: M40/M502060 mm︱ 995 mm︱ 2240 mm︱ 2300 kg︱ 441 - 1.345 mm︱ 0,06 - 0,2 (3) mm/min︱ 3.7 kW︱ 300 mm︱ 270 mm︱ 1.785 x 785 x 190 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            27900 €
            516.15 €
            50 mm
            MK 5
            360 - 1.250 mm
            44 - 1.206 (12) U/min
            Stahl/Guß: M40/M50
            2060 mm
            995 mm
            2240 mm
            2300 kg
            441 - 1.345 mm
            0,06 - 0,2 (3) mm/min
            3.7 kW
            300 mm
            270 mm
            1.785 x 785 x 190 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with hydraulic clamping
            electric height adjustment of extension arm andhydraulic clamping
            hydraulicclamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used  Radial Drilling Machine TAILIFT TC-1600H


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1230 · Radial Drilling Machine

          TAILIFT - TC-1600H - - -

          Technical details
          neuca. 6 Monate ab AuftragseTaiwan34900 €︱ 645.65 €︱ 50 mm︱ MK 5350 - 1.600 mm︱ 56 - 1.450 (12) U/min︱ Stahl/Guß: M40/M502670 mm︱ 1120 mm︱ 2410 mm︱ 3300 kg︱ 465 - 1.420 mm︱ 0,06 - 0,2 (3) mm/min︱ 3.7 kW︱ 320 mm︱ 270 mm︱ 2.550 x 970 x 200 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            ca. 6 Monate ab Auftragse
            Taiwan
            34900 €
            645.65 €
            50 mm
            MK 5
            350 - 1.600 mm
            56 - 1.450 (12) U/min
            Stahl/Guß: M40/M50
            2670 mm
            1120 mm
            2410 mm
            3300 kg
            465 - 1.420 mm
            0,06 - 0,2 (3) mm/min
            3.7 kW
            320 mm
            270 mm
            2.550 x 970 x 200 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with hydraulic clamping
            electric height adjustment of extension arm andhydraulic clamping
            hydraulicclamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          Datasheet
          Request / Contact
          used  Radial Drilling Machine TAILIFT TPR-1100


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1218 · Radial Drilling Machine

          TAILIFT - TPR-1100 - - -

          Technical details
          neu3965Taiwan19500 €︱ 16500 €︱ 308.55 €︱ 142 mm︱ MK 4280 - 1.100 mm︱ 44 - 1.500 (12) U/min︱ Stahl: M 25; Guss: M 381880 mm︱ 870 mm︱ 2210 mm︱ 1800 kg︱ 470 - 1.270 mm︱ 0,05 - 0,15 (3) mm/min︱ 2.2 kW︱ 260 mm︱
          left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            neu
            3965
            Taiwan
            19500 €
            16500 €
            308.55 €
            1
            42 mm
            MK 4
            280 - 1.100 mm
            44 - 1.500 (12) U/min
            Stahl: M 25; Guss: M 38
            1880 mm
            870 mm
            2210 mm
            1800 kg
            470 - 1.270 mm
            0,05 - 0,15 (3) mm/min
            2.2 kW
            260 mm
            Description :
            left/right rotation
            automatic feed
            drilling depth limit
            manual headstock adjustment with mechanical clamping
            electric height adjustment of extension arm and mechanical clamping
            mechanical clamping of swivel movement of extension arm
            central operation panel on the front side
            power load readout for drilling spindle
            hand wheel for spindle fine feed
            coolant equipment
            machine lamp
            box table
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH
          16.500 €
          Datasheet
          Request / Contact

          Belt Grinding Machine

          used  Belt Grinding Machine Unbekannt/Unknown SCHLEIFPOWER BSM 75


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1264 · Belt Grinding Machine

          Unbekannt/Unknown - SCHLEIFPOWER BSM 75 - - 2018 -

          Technical details
          gebraucht20185479China1125 €︱ 900 €︱ 175 mm︱ 2.000 x 75 mm︱ 530 mm︱ 3 kW︱ 75 kg︱ 34 m/s︱ 475 - 1240 mm︱ 200 mm︱
          enclosed grinding head for effective extraction system BRAKE MOTOR SUCTION UNIT thermal overload device adjustable work piece support eye protection variable working height belt quick change system high belt speed big face grinding surface quick chamfering heavy dimensioned contact wheel user manual in GERMAN and ENGLISH machine and equipment according to the CE-regulations
            gebraucht
            2018
            5479
            China
            1125 €
            900 €
            1
            75 mm
            2.000 x 75 mm
            530 mm
            3 kW
            75 kg
            34 m/s
            475 - 1240 mm
            200 mm
            Description :
            enclosed grinding head for effective extraction system
            BRAKE MOTOR
            SUCTION UNIT
            thermal overload device
            adjustable work piece support
            eye protection
            variable working height
            belt quick change system
            high belt speed
            big face grinding surface
            quick chamfering
            heavy dimensioned contact wheel
            user manual in GERMAN and ENGLISH
            machine and equipment according to the CE-regulations
          900 €
          Datasheet
          Request / Contact
          used  Belt Grinding Machine Unbekannt/Unknown HESSE BG 75-2


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1270 · Belt Grinding Machine

          Unbekannt/Unknown - HESSE BG 75-2 - - 2018 -

          Technical details
          gebraucht / neuwertiger Z20185492Polen1110 €︱ 175 mm︱ 2.000 x 75 mm︱ 200 x 75 x 42 mm︱ 76 kg︱ 605 mm︱ 2 Geschwindigkeiten:1.400
          2 SPEEDS closed grinding head brake motor thermal overload protection adjustable workpiece support eye protection adjustable working height grinding belt quick change system high band speed large surface grinding area quick deburring large contact wheel users manual in GERMAN machine and equipment according to the CE-regulations
            gebraucht / neuwertiger Z
            2018
            5492
            Polen
            1110 €
            1
            75 mm
            2.000 x 75 mm
            200 x 75 x 42 mm
            76 kg
            605 mm
            2 Geschwindigkeiten:1.400
            Description :
            2 SPEEDS
            closed grinding head
            brake motor
            thermal overload protection
            adjustable workpiece support
            eye protection
            adjustable working height
            grinding belt quick change system
            high band speed
            large surface grinding area
            quick deburring
            large contact wheel
            users manual in GERMAN
            machine and equipment according to the CE-regulations
          Datasheet
          Request / Contact
          used  Belt Grinding Machine Unbekannt/Unknown SCHLEIFPOWER BSM 150


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1272 · Belt Grinding Machine

          Unbekannt/Unknown - SCHLEIFPOWER BSM 150 - - 2018 -

          Technical details
          gebraucht20185482China1335 €︱ 1070 €︱ 1150 mm︱ 2.000 x 150 mm︱ 200 mm︱ 530 mm︱ 3 kW︱ 95 kg︱ 475 - 1240 mm︱
          enclosed grinding head for effective extraction system BRAKE MOTOR SUCTION UNIT thermal overload device adjustable work piece support eye protection variable working height belt quick change system high belt speed big face grinding surface quick chamfering heavy dimensioned contact wheel user manual in GERMAN and ENGLISH machine and equipment according to the CE-regulations
            gebraucht
            2018
            5482
            China
            1335 €
            1070 €
            1
            150 mm
            2.000 x 150 mm
            200 mm
            530 mm
            3 kW
            95 kg
            475 - 1240 mm
            Description :
            enclosed grinding head for effective extraction system
            BRAKE MOTOR
            SUCTION UNIT
            thermal overload device
            adjustable work piece support
            eye protection
            variable working height
            belt quick change system
            high belt speed
            big face grinding surface
            quick chamfering
            heavy dimensioned contact wheel
            user manual in GERMAN and ENGLISH
            machine and equipment according to the CE-regulations
          1.070 €
          Datasheet
          Request / Contact
          used  Belt Grinding Machine Scantool 75


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1864 · Belt Grinding Machine

          Scantool - 75 - - -

          Technical details
          neuca. 8 Wochen ab AuftragsePolen1310 €︱ 75 mm︱ 2.000 x 75 mm︱ 2800 - 3300 1/min︱ 3 kW︱ 76 kg︱ 30 m/s︱
          Industrial belt grinder with following features: - Danish top quality - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety ALTERNATIVE: VARIANT 75X, WITH BUILT-IN DOUBLE EXTRACTION € 2.140,--
            neu
            ca. 8 Wochen ab Auftragse
            Polen
            1310 €
            75 mm
            2.000 x 75 mm
            2800 - 3300 1/min
            3 kW
            76 kg
            30 m/s
            Description :
            Industrial belt grinder with following features:
            - Danish top quality
            - Separate emergency stop
            - Motor brake
            - Standard
            - Reliable
            - Simple and practical operation
            - Easy to adjust
            - Quick belt change without tools
            - 5-year guarantee on the motor
            - Optimal safety

            ALTERNATIVE:

            VARIANT 75X, WITH BUILT-IN DOUBLE EXTRACTION € 2.140,--
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd  2351 - Wiener Neudorf Straße 4 Objekt 8  Österreich
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd

          Straße 4 Objekt 8



          Contact Trader


            Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd
           Straße 4 Objekt 8
            2351 - Wiener Neudorf
            Österreich
            +43/2236/638 70-0
            +43/2236/636 62
            office@hesse-maschinen.com
            https://www.hesse-maschinen.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Absaugung · Abwickelhaspel · Alu-Kreissäge · Anbiegemaschine · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Biegemaschine horizontal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bügelsäge · Bördelmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Einständer - Richtpresse · Einständerpresse - Hydraulisch · Exzenterpressen - Einständer · Falzformer · Flachschleifmaschine · Horizontal - Bandsägeautomat · Hydraulische Lochstanze · Kaltkreissäge · Kreisschere · Laserschneidmaschine · Lochstanze · Längs- und Querteilanlage · Profilstahlschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Schwenkbiegemaschine · Sickenmaschine · Spitzendrehmaschine · Stanz- und Nibbelmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Topfschleifmaschine · Viersäulenpresse - Hydraulisch · Vorschubapparat · Wasserstrahlschneidanlage · Werkstattpresse - hydraulisch · Werkzeugschleifmaschine - Universal ·