Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          JS-Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center HWACHEON C1 YSMC


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-1611005 · CNC Turning- and Milling Center

          HWACHEON - C1 YSMC - - 2016 - Fanuc 0i

          Technical details
          turning diameter 150 mm︱turning length 599 mm︱control Fanuc 0i ︱travel -x axis 310 mm︱travel -y axis 100 mm︱travel -z axis 700 mm︱Main spindle: 11 / 7,5 kW︱spindle turning speed range ~ 6.000 U/min︱rapid traverse ( X / Y / Z ) 30/15/30 m/min︱tool taper BMT-55/C4 ︱turning length max. 599 mm︱chucking diameter 155 mm︱bar diameter 51 mm︱Subspindle 7,5 / 5,5 kW︱spindle turning speed range ~ 6.000 U/min︱weight of the machine ca. 5,0 t︱
          CNC Turning- and Milling Center Demo Machine HWACHEON C1 YSMC Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine Ideal for complex workpieces in small batches - for maximum flexibility. Thanks to its travelling column design, with its orthogonal X, Y and Z axes, the C1 unifies the machining characteristics of a lathe with the fabrication characteristics of a machining centre. This means that workpieces with complex contours can also be machined to an exceptional level of precision. At the same time, a sub spindle allows two machining steps to be carried out without clamping errors. Features: Linear guideway Y-Axis Driven tools Sub spindle Extra tool magazin Fanuc Manual Guide Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine Ideal for complex workpieces in small batches - for maximum flexibility. Thanks to its travelling column design, with its orthogonal X, Y and Z axes, the C1 unifies the machining characteristics of a lathe with the fabrication characteristics of a machining centre. This means that workpieces with complex contours can also be machined to an exceptional level of precision. At the same time, a sub spindle allows two machining steps to be carried out without clamping errors. Additional tool magazine with 12 positions The particularly robust 18-position turret (BMT-55 und C4) with driven tools does not have a sensitive spindle bearing, as is the case with turning and milling centres, and is therefore outstandingly well-suited to heavy cutting tasks, and carrying out such tasks with short cycle times. In addition, the machine has a 12-position wheel magazine with Capto-C4 holders which can be equipped with different tools during main time, so that all turning and milling tasks can be carried out in one operation, without interruption. Whilst a process is still running, and machining is still underway, the machine can thus be set up for the next workpiece. High rigidity linear rolling guideways permit rapid traverse speeds, dynamic machining and reduce non-productive time. Due to the high quality of the components used and the thermal stability of the new turning centre, high precision is ensured even during high-speed processes carried out in round-the- clock operation.
            turning diameter 150 mm
            turning length 599 mm
            control Fanuc 0i
            travel -x axis 310 mm
            travel -y axis 100 mm
            travel -z axis 700 mm
            Main spindle: 11 / 7,5 kW
            spindle turning speed range ~ 6.000 U/min
            rapid traverse ( X / Y / Z ) 30/15/30 m/min
            tool taper BMT-55/C4
            turning length max. 599 mm
            chucking diameter 155 mm
            bar diameter 51 mm
            Subspindle 7,5 / 5,5 kW
            spindle turning speed range ~ 6.000 U/min
            weight of the machine ca. 5,0 t
            Description :
            CNC Turning- and Milling Center

            Demo Machine

            HWACHEON C1 YSMC

            Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine

            Ideal for complex workpieces in small batches - for maximum flexibility. Thanks
            to its travelling column design, with its orthogonal X, Y and Z axes, the C1
            unifies the machining characteristics of a lathe with the fabrication
            characteristics of a machining centre. This means that workpieces with complex
            contours can also be machined to an exceptional level of precision. At the same
            time, a sub spindle allows two machining steps to be carried out without
            clamping errors.

            Features:
            Linear guideway
            Y-Axis
            Driven tools
            Sub spindle
            Extra tool magazin
            Fanuc Manual Guide


            Horizontal turning centre for chuck sizes of Ø150 mm and tool magazine

            Ideal for complex workpieces in small batches - for maximum flexibility. Thanks
            to its travelling column design, with its orthogonal X, Y and Z axes, the C1
            unifies the machining characteristics of a lathe with the fabrication
            characteristics of a machining centre. This means that workpieces with complex
            contours can also be machined to an exceptional level of precision. At the same
            time, a sub spindle allows two machining steps to be carried out without
            clamping errors.

            Additional tool magazine with 12 positions

            The particularly robust 18-position turret (BMT-55 und C4) with driven tools
            does not have a sensitive spindle bearing, as is the case with turning and
            milling centres, and is therefore outstandingly well-suited to heavy cutting
            tasks, and carrying out such tasks with short cycle times. In addition, the
            machine has a 12-position wheel magazine with Capto-C4 holders which can be
            equipped with different tools during main time, so that all turning and milling
            tasks can be carried out in one operation, without interruption. Whilst a
            process is still running, and machining is still underway, the machine can thus
            be set up for the next workpiece.

            High rigidity linear rolling guideways permit rapid traverse speeds, dynamic
            machining and reduce non-productive time. Due to the high quality of the
            components used and the thermal stability of the new turning centre, high
            precision is ensured even during high-speed processes carried out in round-the-
            clock operation.

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK  SQT 250MS


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-152558 · CNC Turning- and Milling Center

          MAZAK - SQT 250MS - - 1991 - MAZATROL PC Fusion CNC 640T

          Technical details
          turning diameter max. 300 mm︱turning length max. 600 mm︱control MAZATROL PC Fusion CNC 640T︱swing dia. 525 mm︱swing diameter over longit. slide guides 350 mm︱bar material dia. 64 mm︱Main spindle: .︱Spindle speed 35 - 4.000 min/-1︱drive capacity - spindle motor 18,5 kW︱max. torque on the spindle 350 ︱spindle nose A2-6 ︱chucking diameter max. 250 mm︱positive location each 0-360/0,001 Grad︱Subspindle .︱turning speeds 35 - 4.000 U/min︱drive capacity - spindle motor 7,5 kW︱max. torque on the spindle 57 ︱positive location each 72 pos. x 5° Grad︱chucking diameter 169 mm︱Turret
          CNC Turning- and Milling Center MACHINE WILL BE JULY AVAILABLE! Mazak SQT 250MS Collet chuck for main spindle for collets 185E Collet chuck for the counter spindle for collets 173E Tool setter (MAZAK Tool Eye System) C axis Double foot switch to open/close chuck for main and back spindle Automatic opening/closing of chuck Chuck status feedback (open/closed) Front door lock Compl. Coolant system Coolant and chip protection due to fully enclosed workspace Workspace illumination Synchron-tapping Tool check as background function Navigation monitoring display PCMCIA port IC Port Interface for MAZATROL DATA TRANSFER Documentation Interface for barloader Automatic parts catcher Synchronized tapping by rotary tool High pressure coolant Chip conveyor ~21 pieces static tool holders ~ 9 pieces rotary tool holders
            turning diameter max. 300 mm
            turning length max. 600 mm
            control MAZATROL PC Fusion CNC 640T
            swing dia. 525 mm
            swing diameter over longit. slid. 350 mm
            bar material dia. 64 mm
            Spindle speed 35 - 4.000 min/-1
            drive capacity - spindle motor 18,5 kW
            max. torque on the spindle 350
            spindle nose A2-6
            chucking diameter max. 250 mm
            positive location each 0-360/0,001 Grad
            turning speeds 35 - 4.000 U/min
            drive capacity - spindle motor 7,5 kW
            max. torque on the spindle 57
            positive location each 72 pos. x 5° Grad
            chucking diameter 169 mm
            Description :
            CNC Turning- and Milling Center

            MACHINE WILL BE JULY AVAILABLE!

            Mazak SQT 250MS

            Collet chuck for main spindle for collets 185E
            Collet chuck for the counter spindle for collets 173E
            Tool setter (MAZAK Tool Eye System)
            C axis
            Double foot switch to open/close chuck for main and back spindle
            Automatic opening/closing of chuck
            Chuck status feedback (open/closed)
            Front door lock
            Compl. Coolant system
            Coolant and chip protection due to fully enclosed workspace
            Workspace illumination
            Synchron-tapping
            Tool check as background function
            Navigation monitoring display
            PCMCIA port
            IC Port
            Interface for MAZATROL DATA TRANSFER
            Documentation

            Interface for barloader
            Automatic parts catcher
            Synchronized tapping by rotary tool
            High pressure coolant
            Chip conveyor
            ~21 pieces static tool holders
            ~ 9 pieces rotary tool holders


          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column HANKOOK VTC-200 E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-4444 · Vertical Turret Lathe - Single Column

          HANKOOK - VTC-200 E - - 2020 - Fanuc 32i-A

          Technical details
          faceplate diameter 2.000 mm︱swing diameter 2.500 mm︱turning height max. 2.00 mm︱Control Fanuc 32i-A︱max. torque at faceplate 44300 Nm︱max. cutting force 3.000 kgf︱max. workpiece weight 12.000 kg︱table diameter 2.500 mm︱table speed 1~200 min/-1︱gear steps Auto 2. -step︱min. indx angle 0,001 °︱cutting feedrate 0 ~ 900 °/min︱max. speed 2.5 min/-1︱spindle cone ISO 7/24 No. 50 ︱tool size 32 x 32 mm︱mill spindel speed (VTC) 30~3.000 min/-1︱max. mill spindle torque (VTC) 280 Nm︱ram cross section 240 x 240 mm︱X-axis travel (sadle horizontal) 1.500 mm︱Z-axis travel (ram vertical) 1.500 mm︱
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTC-200E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 32i-A - Standard accessories: 4 jaws face plate with 2.000mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark
            faceplate diameter 2.000 mm
            swing diameter 2.500 mm
            turning height max. 2.00 mm
            Control Fanuc 32i-A
            max. torque at faceplate 44300 Nm
            max. cutting force 3.000 kgf
            max. workpiece weight 12.000 kg
            table diameter 2.500 mm
            table speed 1~200 min/-1
            gear steps Auto 2. -step
            min. indx angle 0,001 °
            cutting feedrate 0 ~ 900 °/min
            max. speed 2.5 min/-1
            spindle cone ISO 7/24 No. 50
            tool size 32 x 32 mm
            mill spindel speed (VTC) 30~3.000 min/-1
            max. mill spindle torque (VTC) 280 Nm
            ram cross section 240 x 240 mm
            X-axis travel (sadle horizontal) 1.500 mm
            Z-axis travel (ram vertical) 1.500 mm
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTC-200E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 32i-A
            - Standard accessories:
            4 jaws face plate with 2.000mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column HANKOOK VTB-250E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-3333 · Vertical Turret Lathe - Single Column

          HANKOOK - VTB-250E - - 2020 - Fanuc 32i-B

          Technical details
          faceplate diameter 2.500 mm︱swing diameter 3.000 mm︱turning height max. 2.000 mm︱Control Fanuc 32i-B︱max. torque at faceplate 55100 Nm︱max. cutting force 5.000 kgf︱max. workpiece weight 15.000 kg︱table diameter 2.500 mm︱table speed 1~150 min/-1︱gear steps Auto 2. -step︱spindle cone ISO 7/24 No. 50 ︱tool size 50 mm︱ram cross section 280 x 280 mm︱X-axis travel (sadle horizontal) 1.700 mm︱Z-axis travel (ram vertical) 1.600 mm︱vertical travel of cross rail 1.000 mm︱X-/Z-axis cutting feedrate max. 10.000 mm/min︱X-/Z-axis rapid traverse 10.000 mm/min︱cross rail rapid traverse 300 mm/min︱type of tool holder MAS BT 50
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTB-250E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 12 slots of tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 32i-B - Standard accessories: 4 jaws face plate with 2.500mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark The illustration shows a VTC-250E. However, figures are very similar. VTB has no driven tools and no C-axis.
            faceplate diameter 2.500 mm
            swing diameter 3.000 mm
            turning height max. 2.000 mm
            Control Fanuc 32i-B
            max. torque at faceplate 55100 Nm
            max. cutting force 5.000 kgf
            max. workpiece weight 15.000 kg
            table diameter 2.500 mm
            table speed 1~150 min/-1
            gear steps Auto 2. -step
            spindle cone ISO 7/24 No. 50
            tool size 50 mm
            ram cross section 280 x 280 mm
            X-axis travel (sadle horizontal) 1.700 mm
            Z-axis travel (ram vertical) 1.600 mm
            vertical travel of cross rail 1.000 mm
            X-/Z-axis cutting feedrate max. 10.000 mm/min
            X-/Z-axis rapid traverse 10.000 mm/min
            cross rail rapid traverse 300 mm/min
            type of tool holder MAS BT 50
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTB-250E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 12 slots of tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 32i-B
            - Standard accessories:
            4 jaws face plate with 2.500mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark

            The illustration shows a VTC-250E.
            However, figures are very similar.
            VTB has no driven tools and no C-axis.
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column HANKOOK VTC-125E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-1111 · Vertical Turret Lathe - Single Column

          HANKOOK - VTC-125E - - 2020 - Fanuc 0i-T

          Technical details
          faceplate diameter 1.250 mm︱swing diameter 1.600 mm︱turning height max. 1.400 mm︱Control Fanuc 0i-T︱max. torque at faceplate 13900 Nm︱max. cutting force 3.000 kgf︱max. workpiece weight 8.000 kg︱table diameter 1.250 mm︱table speed 0,9~360 min/-1︱gear steps Auto 2. -step︱min. indx angle 0,001 °︱cutting feedrate 0 ~ 900 °/min︱max. speed 3 min/-1︱spindle cone ISO 7/24 No. 50 ︱tool size 32 x 32 mm︱mill spindel speed (VTC) 30~3.000 min/-1︱max. mill spindle torque (VTC) 235 Nm︱ram cross section 220 x 220 mm︱X-axis travel (sadle horizontal) 1.060 mm︱Z-axis travel (ram vertical) 900 mm︱
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTC-125E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 0i-T - Standard accessories: 4 jaws face plate with 1.250 diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark
            faceplate diameter 1.250 mm
            swing diameter 1.600 mm
            turning height max. 1.400 mm
            Control Fanuc 0i-T
            max. torque at faceplate 13900 Nm
            max. cutting force 3.000 kgf
            max. workpiece weight 8.000 kg
            table diameter 1.250 mm
            table speed 0,9~360 min/-1
            gear steps Auto 2. -step
            min. indx angle 0,001 °
            cutting feedrate 0 ~ 900 °/min
            max. speed 3 min/-1
            spindle cone ISO 7/24 No. 50
            tool size 32 x 32 mm
            mill spindel speed (VTC) 30~3.000 min/-1
            max. mill spindle torque (VTC) 235 Nm
            ram cross section 220 x 220 mm
            X-axis travel (sadle horizontal) 1.060 mm
            Z-axis travel (ram vertical) 900 mm
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTC-125E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 0i-T
            - Standard accessories:
            4 jaws face plate with 1.250 diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column HANKOOK VTC-160 E


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-2222 · Vertical Turret Lathe - Single Column

          HANKOOK - VTC-160 E - - 2020 - Fanuc 0i-T

          Technical details
          faceplate diameter 1.600 mm︱swing diameter 2.000 mm︱turning height max. 1.400 mm︱Control Fanuc 0i-T︱max. torque at faceplate 23800 Nm︱max. cutting force 3.000 kgf︱max. workpiece weight 10.000 kg︱table diameter 1.600 mm︱table speed 0,7~280 min/-1︱gear steps Auto 2. -step︱min. indx angle 0,001 °︱cutting feedrate 0 ~ 900 °/min︱max. speed 3 min/-1︱spindle cone ISO 7/24 No. 50 ︱tool size 32 x 32 mm︱mill spindel speed (VTC) 30~3.000 min/-1︱max. mill spindle torque (VTC) 235 Nm︱ram cross section 220 x 220 mm︱X-axis travel (sadle horizontal) 1260 mm︱Z-axis travel (ram vertical) 900 mm︱
          TECHNICAL DESCRIPTION Vertical Turret Lathe - Single Column HANKOOK VTC-160E Heavy Duty High Precision Vertical Turning Lathe. - Casting bed with strong ribs, hardend and smoothed box way guide are ensure for high precision and working life.Each guideways for feeding axis is lubricated and attached with Turcite to be reduced wear and friction- resistance. - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up to 70 kg - Axis drive system:Big ball screws coupled with digital servo motors and linear scales guarantee high reproducibility and precision in positioning. - Control system: Fanuc 0i-T - Standard accessories: 4 jaws face plate with 1.600mm diameter Automatic Tool Changer Hydraulik unit Central lubrication Coolant tank Telescopic cover Work light Patrol lamp (Red, Yellow, Green) Levelling block Foundation bolt & nut Operation tool box & tool kits CE conformity mark
            faceplate diameter 1.600 mm
            swing diameter 2.000 mm
            turning height max. 1.400 mm
            Control Fanuc 0i-T
            max. torque at faceplate 23800 Nm
            max. cutting force 3.000 kgf
            max. workpiece weight 10.000 kg
            table diameter 1.600 mm
            table speed 0,7~280 min/-1
            gear steps Auto 2. -step
            min. indx angle 0,001 °
            cutting feedrate 0 ~ 900 °/min
            max. speed 3 min/-1
            spindle cone ISO 7/24 No. 50
            tool size 32 x 32 mm
            mill spindel speed (VTC) 30~3.000 min/-1
            max. mill spindle torque (VTC) 235 Nm
            ram cross section 220 x 220 mm
            X-axis travel (sadle horizontal) 1260 mm
            Z-axis travel (ram vertical) 900 mm
            Description :
            TECHNICAL DESCRIPTION

            Vertical Turret Lathe - Single Column

            HANKOOK VTC-160E

            Heavy Duty High Precision Vertical Turning Lathe.
            - Casting bed with strong ribs, hardend and smoothed box way guide are ensure
            for high precision and working life.Each guideways for feeding axis is
            lubricated and attached with Turcite to be reduced wear and friction-
            resistance.
            - Tool Changer: 24 slots of tools also 12 for driven tools for a tool weight up
            to 70 kg
            - Axis drive system:Big ball screws coupled with digital servo motors and
            linear scales guarantee high reproducibility and precision in positioning.
            - Control system: Fanuc 0i-T
            - Standard accessories:
            4 jaws face plate with 1.600mm diameter
            Automatic Tool Changer
            Hydraulik unit
            Central lubrication
            Coolant tank
            Telescopic cover
            Work light
            Patrol lamp (Red, Yellow, Green)
            Levelling block
            Foundation bolt & nut
            Operation tool box & tool kits

            CE conformity mark
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal MTE BF 3200


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-3100544 · Bed Type Milling Machine - Universal

          MTE - BF 3200 - - 2003 - Heidenhain 530

          Technical details
          x-travel 3.000 mm︱y-travel 1.000 mm︱z-travel 1.000 mm︱control Heidenhain 530 ︱table surface area 3.200 x 1.000 mm︱T-slot - width 7 -22 mm︱T-slot - distance 140 mm︱max. table load 9.000 kg︱turning speed range - milling 40 - 6.000 U/min︱low speed range 40 - 386 min/-1︱Medium speed range 387 - 1.006 min/-1︱High speed range 1.007 - 2.500 min/-1︱Constant torque 40 - 148 min/-1 ︱Constant performance 149 - 2.500 min/-1 ︱spindle drive 22 kW︱Spindle angular position via Hand ︱tool taper 50 DIN 2080 ︱Tool clamping force 1.500 daN︱ ︱milling feed range 0 - 4.000 mm/min︱
            x-travel 3.000 mm
            y-travel 1.000 mm
            z-travel 1.000 mm
            control Heidenhain 530
            table surface area 3.200 x 1.000 mm
            T-slot - width 7 -22 mm
            T-slot - distance 140 mm
            max. table load 9.000 kg
            turning speed range - milling 40 - 6.000 U/min
            low speed range 40 - 386 min/-1
            Medium speed range 387 - 1.006 min/-1
            High speed range 1.007 - 2.500 min/-1
            Constant torque 40 - 148 min/-1
            Constant performance 149 - 2.500 min/-1
            spindle drive 22 kW
            Spindle angular position via Hand
            tool taper 50 DIN 2080
            Tool clamping force 1.500 daN
            milling feed range 0 - 4.000 mm/min
          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used  milling machining centers - horizontal DMG MORI NHX 5000


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-KD0053 · milling machining centers - horizontal

          DMG MORI - NHX 5000 - - 2012 - M730 BM MAPPS IV

          Technical details
          x-travel 730 mm︱y-travel 730 mm︱z-travel 880 mm︱Control M730 BM MAPPS IV︱Main spindle: ︱max. spindel speed 12.000 min/-1︱power capacity - milling spindle 15 / 11 kW︱max. Torque 102 Nm︱distance spindle center to table 80 - 800 mm︱distance spindle nose and table 70 - 950 mm︱pallet changer: .︱numbers of pallets 2 ︱size of pallet 500 x 500 mm︱max. workpiece weight 500 kg︱max. workpiecediameter 800 mm︱max. workpiece height 1.100 mm︱change time of pallets 9,5 sec︱Indexing-time 1,49 sec︱B-axis (table) 0,001 °︱Tool changer
          Milling Machining Center - Horizontal DMG MORI SEIKI NHX 5000 M730BM For accessoires please ask!
            x-travel 730 mm
            y-travel 730 mm
            z-travel 880 mm
            Control M730 BM MAPPS IV
            max. spindel speed 12.000 min/-1
            power capacity - milling spindle 15 / 11 kW
            max. Torque 102 Nm
            distance spindle center to table 80 - 800 mm
            distance spindle nose and table 70 - 950 mm
            numbers of pallets 2
            size of pallet 500 x 500 mm
            max. workpiece weight 500 kg
            max. workpiecediameter 800 mm
            max. workpiece height 1.100 mm
            change time of pallets 9,5 sec
            Indexing-time 1,49 sec
            B-axis (table) 0,001 °
            Description :
            Milling Machining Center - Horizontal

            DMG MORI SEIKI
            NHX 5000 M730BM

            For accessoires please ask!
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column AWEA LP 4021


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-0814 · Planer-Type Milling M/C - Double Column

          AWEA - LP 4021 - - 2008 - Fanuc 18i

          Technical details
          x-travel 4.000 mm︱y-travel 2.100 mm︱z-travel 1.000 mm︱Control Fanuc 18i ︱table-size 4.000 x 2.000 mm︱rapid traverse X-axis 18 m/min︱rapid traverse Y-axis 18 m/min︱rapid traverse Z-axis 15 m/min︱turning speed range - drive spindle 10 ~ 6.000 U/min︱power capacity - milling spindle 26 / 22 kW︱tool taper DIN 69871 A50 ︱tool piece magazine with 60 Pos.︱T-slots 18h8 / 125mm ︱total power requirement 70 kVA︱weight of the machine ca. 42 t︱dimensions of the machine ca. 8 x 3 x 4 m︱
          Manufacturer: AWEA Model: LP4021 Type: portal milling machine Condition: used Year of construction: 2008 Equipment: Fanuc 18i control 60-fold tool changer Internal coolant supply 40 bar Chip conveyor Electronic handwheel Autom. Indexing device for milling heads 90 ° angle milling head Pick-up station for milling heads Measuring probe for workpiece measurement Spindle 6,000 rpm. SK50 Din 69871 Basic equipment of the machine: 32 bit Fanuc CNC control 10.4 inch color LCD screen AC - Digital Fanuc main spindle and axis motors Tool holder DIN 69871 A50 Main spindle speed range 10 ~ 6,000 min-1 with buildt-in motor spindle Drive power of the main spindle 26/22 KW Cooling through the form A spindle Additional coolant tank with paper band filter Travel X - axis 4,000mm Y - axis 2.100mm Z axis 1,000mm Table size 4,000 x 2,000mm Rapid traverse X - axis 18m / min Y axis 18m / min Z axis 15m / min
            x-travel 4.000 mm
            y-travel 2.100 mm
            z-travel 1.000 mm
            Control Fanuc 18i
            table-size 4.000 x 2.000 mm
            rapid traverse X-axis 18 m/min
            rapid traverse Y-axis 18 m/min
            rapid traverse Z-axis 15 m/min
            turning speed range - drive spin. 10 ~ 6.000 U/min
            power capacity - milling spindle 26 / 22 kW
            tool taper DIN 69871 A50
            tool piece magazine with 60 Pos.
            T-slots 18h8 / 125mm
            total power requirement 70 kVA
            weight of the machine ca. 42 t
            dimensions of the machine ca. 8 x 3 x 4 m
            Description :
            Manufacturer: AWEA
            Model: LP4021

            Type: portal milling machine
            Condition: used
            Year of construction: 2008
            Equipment: Fanuc 18i control
            60-fold tool changer
            Internal coolant supply 40 bar
            Chip conveyor
            Electronic handwheel
            Autom. Indexing device for milling heads
            90 ° angle milling head
            Pick-up station for milling heads
            Measuring probe for workpiece measurement
            Spindle 6,000 rpm.
            SK50 Din 69871

            Basic equipment of the machine:
            32 bit Fanuc CNC control
            10.4 inch color LCD screen
            AC - Digital Fanuc main spindle and axis motors
            Tool holder DIN 69871 A50
            Main spindle speed range 10 ~ 6,000 min-1 with buildt-in motor spindle
            Drive power of the main spindle 26/22 KW
            Cooling through the form A spindle
            Additional coolant tank with paper band filter

            Travel
            X - axis 4,000mm
            Y - axis 2.100mm
            Z axis 1,000mm
            Table size 4,000 x 2,000mm
            Rapid traverse
            X - axis 18m / min
            Y axis 18m / min
            Z axis 15m / min
          Datasheet
          Request / Contact

          Spare parts

          used  Spare parts TOYODA


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-SPIN · Spare parts

          TOYODA - - - 2016 -

          Technical details
          Year 2016
          TOYODA spindle 14,000 RPM Suitable for: Horizontal machining center: FH 400J FH 500J FH 450S FH 550S SK 40 260Nm New spindles cost around EURO 40,000.00 Replacement of the spindle costs approx. EURO 28,000.00 This spindle has a bearing damage! !! Sold as defective !! Must be repaired !!
            Year 2016
            Description :
            TOYODA spindle
            14,000 RPM

            Suitable for:

            Horizontal machining center:

            FH 400J
            FH 500J
            FH 450S
            FH 550S

            SK 40
            260Nm

            New spindles cost around EURO 40,000.00
            Replacement of the spindle costs approx. EURO 28,000.00

            This spindle has a bearing damage!
            !! Sold as defective !! Must be repaired !!
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          JS-Werkzeugmaschinen GmbH   32545 Bad Oeynhausen Weserstrasse 228 Deutschland
          JS-Werkzeugmaschinen GmbH

          Weserstrasse 228



          Contact Trader


            JS-Werkzeugmaschinen GmbH
           Weserstrasse 228
            32545 Bad Oeynhausen
            Deutschland
            +49 (0) 163 - 6037450
           
            info@js-wzm.de
            www.js-wzm.de
            Contact person:
          Herrn Jörg Schröder +49 (0) 163 - 6037450

           




          Machine category


          Bearbeitungszentrum - Horizontal · Bettfräsmaschine - Universal · CNC Dreh- und Fräszentrum · Ersatzteile · Karusselldrehmaschine - Einständer · Portalfräsmaschine ·