Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Запит

Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Karl Günter Wirths GmbH - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe PBR T-600 LC

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000127 · Center Lathe

          PBR - T-600 LC - - 2000 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide 900 mm︱turning length 3000 mm︱spindle passage 150 mm︱turning speeds 4-800 U/min︱
          Machine has a moving steady and a fixed steady. It has some accessories, Multifix holder, 3 jaw chuck and DRO.
            turning diameter over bed 1250 mm
            turning diameter over slide 900 mm
            turning length 3000 mm
            spindle passage 150 mm
            turning speeds 4-800 U/min
            Description :
            Machine has a moving steady and a fixed steady. It has some accessories,
            Multifix holder, 3 jaw chuck and DRO.
          Datasheet
          Request / Contact
          used Center Lathe MONDIALE Celtic 14

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000120 · Center Lathe

          MONDIALE - Celtic 14 - - 1981 -

          Technical details
          turning diameter over bed 0370 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱spindle turning speed range 36- 1600 U/min︱voltage 400 V︱feed per revolution mm︱rapid travel - longitudinal/face m/min︱spindle bore 35 mm︱total power requirement 3 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 3 x 1,1 x 1,5 m︱
            turning diameter over bed 0370 mm
            turning diameter over slide rest 240 mm
            turning length 1500 mm
            spindle turning speed range 36- 1600 U/min
            voltage 400 V
            spindle bore 35 mm
            total power requirement 3 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 3 x 1,1 x 1,5 m
            Description :

          Datasheet
          Request / Contact
          used Center Lathe BOEHRINGER-OERLIKON D 420

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000126 · Center Lathe

          BOEHRINGER-OERLIKON - D 420 - - 1975 -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 295 mm︱turning length 1000 mm︱spindle bore 51 mm︱spindle turning speed range 31 - 2800 U/min︱spindle drive 15 kW︱feeds 0,05 - 20 mm/U︱face slide travel 220 mm︱ 110 mm︱bed width 360 mm︱tailstock quill diameter 75 mm︱tailstock quill stroke 200 mm︱tailstock taper MT 5 ︱ 3,0 x 1,66 x 1,64 m︱total power requirement 15 kW︱weight of the machine ca. 3,7 t︱dimensions of the machine ca. 3,5 x 2,2 x 1,7 m︱
          - with rapid feed in carriage - Accessories: MULTIFIX-tool post with various inserts, solid steady, coolant
            turning diameter over bed 420 mm
            turning diameter over slide rest 295 mm
            turning length 1000 mm
            spindle bore 51 mm
            spindle turning speed range 31 - 2800 U/min
            spindle drive 15 kW
            feeds 0,05 - 20 mm/U
            face slide travel 220 mm
            110 mm
            bed width 360 mm
            tailstock quill diameter 75 mm
            tailstock quill stroke 200 mm
            tailstock taper MT 5
            3,0 x 1,66 x 1,64 m
            total power requirement 15 kW
            weight of the machine ca. 3,7 t
            dimensions of the machine ca. 3,5 x 2,2 x 1,7 m
            Description :
            - with rapid feed in carriage -

            Accessories: MULTIFIX-tool post with various inserts,
            solid steady, coolant
          Datasheet
          Request / Contact

          CNC Lathe

          used CNC Lathe GILDEMEISTER GD 200

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203407 · CNC Lathe

          GILDEMEISTER - GD 200 - - 1985 - EPM

          Technical details
          turning diameter 0400 mm︱turning length 700 mm︱control EPM ︱total power requirement 17 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5 x 2 x 2 m︱
          Machine has EPM control. It is working , but could be used also as spare part supply.
            turning diameter 0400 mm
            turning length 700 mm
            control EPM
            total power requirement 17 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,5 x 2 x 2 m
            Description :
            Machine has EPM control. It is working , but could be used also as spare part
            supply.
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203419 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2010 - MSX-850IV

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱spindle bore diameter 80 mm︱Spindle Speed 4.000 1/min︱spindle motor 18,5/15 kW︱X-Axis movement 260 mm︱Y-Axis movement 50 mm︱Z-Axis movement 795 mm︱Minimum indexing C-Axis main Spindle 0,001 °︱Number of tools on turret 12 ︱Spindle speed driven tools 6.000 1/min︱Spindle motor driven tools 5,5/3,7 kW︱Tool type BMT ︱control MSX-850IV ︱Required floor space 3795 x 1925 mm︱Weight 6100 kg︱Bar feeder ︱Chip conveyor ︱Signal-Light/Machine operation light ︱Chuck ︱
          Control MSX-850IV. Machine has main spindle and sub spindle, bar loader with 3 m, chip conveyor, part collection and high preasur pump with 30 bar. Machine will be supplied with chuck at main spindle and at sub spindle. We will supply some tool holders along with the machine.
            turning diameter 366 mm
            turning length 705 mm
            spindle bore diameter 80 mm
            Spindle Speed 4.000 1/min
            spindle motor 18,5/15 kW
            X-Axis movement 260 mm
            Y-Axis movement 50 mm
            Z-Axis movement 795 mm
            Minimum indexing C-Axis main Spi. 0,001 °
            Number of tools on turret 12
            Spindle speed driven tools 6.000 1/min
            Spindle motor driven tools 5,5/3,7 kW
            Tool type BMT
            control MSX-850IV
            Required floor space 3795 x 1925 mm
            Weight 6100 kg
            Description :
            Control MSX-850IV. Machine has main spindle and sub spindle, bar loader with 3
            m, chip conveyor, part collection and high preasur pump with 30 bar. Machine
            will be supplied with chuck at main spindle and at sub spindle. We will supply
            some tool holders along with the machine.
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203420 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2008 - MSX-850III

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱spindle bore diameter 80 mm︱Spindle Speed 4.000 1/min︱spindle motor 18,5/15 kW︱X-Axis movement 260 mm︱Y-Axis movement 50 mm︱Z-Axis movement 795 mm︱Minimum indexing C-Axis main Spindle 0,001 °︱Number of tools on turret 12 ︱Spindle speed driven tools 6.000 1/min︱Spindle motor driven tools 5,5/3,7 kW︱Tool type BMT ︱control MSX-850III ︱Required floor space 3795 x 1925 mm︱Weight 6100 kg︱Bar feeder ︱Chip conveyor ︱Signal-Light/Machine operation light ︱Chuck ︱
          Control MSX-850III. Machine has main spindle and sub spindle, bar loader with 3 m, chip conveyor, part collection and high preasur pump with 30 bar. Machine will be supplied with chuck at main spindle and at sub spindle. We will supply some tool holders along with the machine.
            turning diameter 366 mm
            turning length 705 mm
            spindle bore diameter 80 mm
            Spindle Speed 4.000 1/min
            spindle motor 18,5/15 kW
            X-Axis movement 260 mm
            Y-Axis movement 50 mm
            Z-Axis movement 795 mm
            Minimum indexing C-Axis main Spi. 0,001 °
            Number of tools on turret 12
            Spindle speed driven tools 6.000 1/min
            Spindle motor driven tools 5,5/3,7 kW
            Tool type BMT
            control MSX-850III
            Required floor space 3795 x 1925 mm
            Weight 6100 kg
            Description :
            Control MSX-850III. Machine has main spindle and sub spindle, bar loader with 3
            m, chip conveyor, part collection and high preasur pump with 30 bar. Machine
            will be supplied with chuck at main spindle and at sub spindle. We will supply
            some tool holders along with the machine.
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used Facing and Centering Lathe ZERBST WMW DP1S3

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2020 · Facing and Centering Lathe

          ZERBST WMW - DP1S3 - - 1990 -

          Technical details
          turning diameter over bed 1600 mm︱turning diameter over slide rest 1000 mm︱turning length 4000 mm︱faceplate diameter 1250 mm︱turning diameter over bed 1600 mm︱spindle bore 100 mm︱spindle turning speed range 3,55 - 450 U/min︱max. workpiece weight between centers 10000 kg︱rapid traverse 6 m/min︱total power requirement 30 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 7 x 2,5 x 2,3 m︱
          Machines was reconditioned and modernized with new electrica in 2010. We will supply a fixed and a movable steady along with the machine. Furthermore we will supply some centers along with the machine.
            turning diameter over bed 1600 mm
            turning diameter over slide rest 1000 mm
            turning length 4000 mm
            faceplate diameter 1250 mm
            turning diameter over bed 1600 mm
            spindle bore 100 mm
            spindle turning speed range 3,55 - 450 U/min
            max. workpiece weight between ce. 10000 kg
            rapid traverse 6 m/min
            total power requirement 30 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 7 x 2,5 x 2,3 m
            Description :
            Machines was reconditioned and modernized with new electrica in 2010. We will
            supply a fixed and a movable steady along with the machine. Furthermore we will
            supply some centers along with the machine.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathe - cycle-controlled SAILO Contur Dialog H 66

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203409 · Lathe - cycle-controlled

          SAILO - Contur Dialog H 66 - - 2003 - Siemens 810 D

          Technical details
          turning diameter 0660 mm︱turning length 2000 mm︱control Siemens 810 D ︱turning dia. over face-slide 400 mm︱turret head 8 Pos. ︱bed width 433 mm︱max. workpiece weight between centers 2000 kg︱spindle turning speed range 2- 2500 U/min︱spindle bore 105 mm︱cross movement 340 mm︱longitudinal travel 1980 mm︱rapid traverse X-axis 8 m/min︱rapid traverse Z-axis 8 m/min︱total power requirement 22 kW︱weight of the machine ca. 4,7 t︱dimensions of the machine ca. 4 x 2,3 x 2 m︱
          Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
            turning diameter 0660 mm
            turning length 2000 mm
            control Siemens 810 D
            turning dia. over face-slide 400 mm
            turret head 8 Pos.
            bed width 433 mm
            max. workpiece weight between ce. 2000 kg
            spindle turning speed range 2- 2500 U/min
            spindle bore 105 mm
            cross movement 340 mm
            longitudinal travel 1980 mm
            rapid traverse X-axis 8 m/min
            rapid traverse Z-axis 8 m/min
            total power requirement 22 kW
            weight of the machine ca. 4,7 t
            dimensions of the machine ca. 4 x 2,3 x 2 m
            Description :
            Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
          Datasheet
          Request / Contact
          used Lathe - cycle-controlled GORNATI CMG 750 NSXP

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203402 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und ein Halter auf Capto.
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und
            ein Halter auf Capto.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Vertical Turret Lathe - Single Column DOERRIES VCE 125/160

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40094 · Vertical Turret Lathe - Single Column

          DOERRIES - VCE 125/160 - - - S 840 D

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1600 mm︱turning height 1400 mm︱Control S 840 D ︱faceplate turning speed range 0- 280 U/min︱workpiece weight max. 12000 kg︱tool change unit 10 Pos.︱total power requirement 95 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 3,5 x 3,2 x 5,1 m︱
          Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens 840 D
            faceplate diameter 1250 mm
            swing diameter 1600 mm
            turning height 1400 mm
            Control S 840 D
            faceplate turning speed range 0- 280 U/min
            workpiece weight max. 12000 kg
            tool change unit 10 Pos.
            total power requirement 95 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 3,5 x 3,2 x 5,1 m
            Description :
            Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens
            840 D
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used Machining Center - Horizontal STARRAG HECKERT CWK 400

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10029 · Machining Center - Horizontal

          STARRAG HECKERT - CWK 400 - - 2002 - SIEMENS 840 D

          Technical details
          x-travel 650 mm︱y-travel 500 mm︱z-travel 650 mm︱Control SIEMENS 840 D ︱type of pallet-changer 8-fach ︱size of pallet 500 x 400 mm︱tool change unit 240-fach ︱tool taper HSK- 63 ︱0 24 kW︱max. pallet 400 kg︱turning speeds 50- 15.000 U/min︱rotary table NC Rundtisch ︱total power requirement 110 A︱weight of the machine ca. 16 t︱dimensions of the machine ca. 8,0x4,6x2,9 m︱swarf conveyor ︱high pressure coolant ︱internal coolant ︱
          240 tool position ATC. Measuring tracer. Cooling trough spindle and filtering arrangement, 50 bar. Chip conveyor and exhaust ventilation.
            x-travel 650 mm
            y-travel 500 mm
            z-travel 650 mm
            Control SIEMENS 840 D
            type of pallet-changer 8-fach
            size of pallet 500 x 400 mm
            tool change unit 240-fach
            tool taper HSK- 63
            0 24 kW
            max. pallet 400 kg
            turning speeds 50- 15.000 U/min
            rotary table NC Rundtisch
            total power requirement 110 A
            weight of the machine ca. 16 t
            dimensions of the machine ca. 8,0x4,6x2,9 m
            Description :
            240 tool position ATC.
            Measuring tracer.
            Cooling trough spindle and filtering arrangement, 50 bar.
            Chip conveyor and exhaust ventilation.
          Datasheet
          Request / Contact

          Machining Center - Universal

          used Machining Center - Universal DECKEL-MAHO DMU 60 T

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10163 · Machining Center - Universal

          DECKEL-MAHO - DMU 60 T - - 2000 -

          Technical details
          x-travel 0630 mm︱y-travel 560 mm︱z-travel 560 mm︱turning speeds 12.000 U/min︱feed speeds 20-10.000 mm/min︱ 26/26/20 m/min︱ 24-fach ︱spindle taper SK 40 ︱table surface area 1000x600 mm︱total power requirement 26 kW︱weight of the machine ca. 6.500 t︱dimensions of the machine ca. m︱
          Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic hand wheel, chip conveying worm and cooling arrangement. Machine has cooling through spindle. Control: Heidenhain 430
            x-travel 0630 mm
            y-travel 560 mm
            z-travel 560 mm
            turning speeds 12.000 U/min
            feed speeds 20-10.000 mm/min
            26/26/20 m/min
            24-fach
            spindle taper SK 40
            table surface area 1000x600 mm
            total power requirement 26 kW
            weight of the machine ca. 6.500 t
            Description :
            Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic
            hand wheel, chip conveying worm and cooling arrangement. Machine has cooling
            through spindle. Control: Heidenhain 430
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used Machining Center - Vertical MAZAK VTC 20 B

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10172 · Machining Center - Vertical

          MAZAK - VTC 20 B - - 1999 - Mazatrol M 32 B

          Technical details
          x-travel 1120 mm︱y-travel 510 mm︱z-travel 510 mm︱Control Mazatrol M 32 B ︱table-size 1460 x 510 mm︱feeds 1- 20000 mm/min︱rapid traverse 24/24/20 m/min︱spindle turning speed - stepless 40- 7000 U/min︱spindle taper ISO 40 ︱tool change unit 24 Pos.︱total power requirement 20 KVA︱weight of the machine ca. 5,85 t︱dimensions of the machine ca. 4,7 x 2,9 x 2,7 m︱
          Machine will be supplied with some tool holders and is ready for work. Machine comes with a chip conveyor.
            x-travel 1120 mm
            y-travel 510 mm
            z-travel 510 mm
            Control Mazatrol M 32 B
            table-size 1460 x 510 mm
            feeds 1- 20000 mm/min
            rapid traverse 24/24/20 m/min
            spindle turning speed - stepless 40- 7000 U/min
            spindle taper ISO 40
            tool change unit 24 Pos.
            total power requirement 20 KVA
            weight of the machine ca. 5,85 t
            dimensions of the machine ca. 4,7 x 2,9 x 2,7 m
            Description :
            Machine will be supplied with some tool holders and is ready for work. Machine
            comes with a chip conveyor.
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used Milling Machining Centers 5 Axis HUBER + GRIMME HG3000T

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26744 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG3000T - - 1996 - NUM

          Technical details
          x-travel 3000 mm︱y-travel 2500 mm︱z-travel 400 mm︱Control NUM ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4 x 3 x 2 m︱
          5 axes machining center to work on wood or plastic. Machine has two tables and 6 position tool changer (ATC) at each table.
            x-travel 3000 mm
            y-travel 2500 mm
            z-travel 400 mm
            Control NUM
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 12 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 4 x 3 x 2 m
            Description :
            5 axes machining center to work on wood or plastic. Machine has two tables and
            6 position tool changer (ATC) at each table.
          Datasheet
          Request / Contact
          used Milling Machining Centers 5 Axis HUBER + GRIMME HG 1400

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26745 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG 1400 - - 1995 - H+G

          Technical details
          x-travel 1400 mm︱y-travel 1000 mm︱z-travel 300 mm︱Control H+G ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 2 x 3 m︱
          5 axes machining center to work on wood or plastic. CNC CONTROL OF THAT MACHINE IS DEFECT AND HAS TO BE REPAIRED BY THE BUYER ! MACHINE COULD BE USED FOR SPARE PART SUPPLY !
            x-travel 1400 mm
            y-travel 1000 mm
            z-travel 300 mm
            Control H+G
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 2 x 3 m
            Description :
            5 axes machining center to work on wood or plastic. CNC CONTROL OF THAT MACHINE
            IS DEFECT AND HAS TO BE REPAIRED BY THE BUYER ! MACHINE COULD BE USED FOR SPARE
            PART SUPPLY !
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Pillar Drilling Machine ABOGA A 4008

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-50021 · Pillar Drilling Machine

          ABOGA - A 4008 - - 2000 -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 330 mm︱bore stroke 200 mm︱bore capacity in cast iron 40 mm︱spindle cone MT 4 ︱spindle turning speed range 30- 1500 U/min︱table-size 400 x 330 mm︱T-slot - width 15 mm︱distance spindle /table 0- 1000 mm︱column diameter 200 mm︱feeds 0,10/0,16/0,24/0,33 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 1 x 1 x 1,9 m︱
            bore capacity in steel (diameter. 35 mm
            throat 330 mm
            bore stroke 200 mm
            bore capacity in cast iron 40 mm
            spindle cone MT 4
            spindle turning speed range 30- 1500 U/min
            table-size 400 x 330 mm
            T-slot - width 15 mm
            distance spindle /table 0- 1000 mm
            column diameter 200 mm
            feeds 0,10/0,16/0,24/0,33 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 1 x 1 x 1,9 m
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used Radial Drilling Machine STANKOIMPORT 2 A 554

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-60097 · Radial Drilling Machine

          STANKOIMPORT - 2 A 554 - - 1990 -

          Technical details
          drilling capacity steel/cast iron 50,60 mm︱throat max. 1600 mm︱spindle taper: MK 5 ︱throat min. 365 mm︱drilling depth in one stroke 400 mm︱vertical adjustment of arm 750 mm︱base plate surface area 1800 x 1000 mm︱spindle turning speed range 18 - 2000 U/min︱feeds 0,056 - 0,56 mm/U︱total power requirement 4 kW︱weight of the machine ca. 4,7 t︱
          With table.
            drilling capacity steel/cast iro. 50,60 mm
            throat max. 1600 mm
            spindle taper: MK 5
            throat min. 365 mm
            drilling depth in one stroke 400 mm
            vertical adjustment of arm 750 mm
            base plate surface area 1800 x 1000 mm
            spindle turning speed range 18 - 2000 U/min
            feeds 0,056 - 0,56 mm/U
            total power requirement 4 kW
            weight of the machine ca. 4,7 t
            Description :
            With table.
          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used Table Type Boring and Milling Machine TOS WHQ13

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-70100 · Table Type Boring and Milling Machine

          TOS - WHQ13 - - 2012 - S 840 D

          Technical details
          spindle diameter 130 mm︱x-travel 4000 mm︱y-travel 2500 mm︱Control S 840 D ︱z-travel 1600 mm︱W-axis (spindle longitudinal) 800 mm︱table-size 2500 x 1800 mm︱max. workpiece weight 12000 kg︱tool taper ISO 50 ︱spindle turning speed range 10- 3000 U/min︱total power requirement 55 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 6 x 6 x 4 m︱
            spindle diameter 130 mm
            x-travel 4000 mm
            y-travel 2500 mm
            Control S 840 D
            z-travel 1600 mm
            W-axis (spindle longitudinal) 800 mm
            table-size 2500 x 1800 mm
            max. workpiece weight 12000 kg
            tool taper ISO 50
            spindle turning speed range 10- 3000 U/min
            total power requirement 55 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 6 x 6 x 4 m
          Datasheet
          Request / Contact

          Universal Milling Machine

          used Universal Milling Machine KNUTH UFM 3

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111172 · Universal Milling Machine

          KNUTH - UFM 3 - - 1995 -

          Technical details
          x-travel 785 mm︱y-travel 250 mm︱z-travel 410 mm︱table-size 1120 x 250 mm︱spindle taper SK 50 ︱spindle turning speed range 40- 2000 U/min︱turning speeds: 18 ︱total power requirement 5,5 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 1,5 x 1,7 x 1,65 m︱
            x-travel 785 mm
            y-travel 250 mm
            z-travel 410 mm
            table-size 1120 x 250 mm
            spindle taper SK 50
            spindle turning speed range 40- 2000 U/min
            turning speeds: 18
            total power requirement 5,5 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 1,5 x 1,7 x 1,65 m
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear Hobbing Machine - Vertical LIEBHERR ET 1500

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1762 · Gear Hobbing Machine - Vertical

          LIEBHERR - ET 1500 - - 1973 -

          Technical details
          max. wheel diameter 1500 mm︱gear width 280 mm︱max. module 14 ︱min. module 1 ︱table diameter 1400 mm︱total power requirement 86 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Internal gear gasher for single teeth cutting. Machine was completly reconditioned in 2007 ! Machine comes along with a sound protection cabine, chnage gears and other equipment.
            max. wheel diameter 1500 mm
            gear width 280 mm
            max. module 14
            min. module 1
            table diameter 1400 mm
            total power requirement 86 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Internal gear gasher for single teeth cutting.
            Machine was completly reconditioned in 2007 !
            Machine comes along with a sound protection cabine, chnage gears and other
            equipment.
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine

          used Cylindrical Grinding Machine FORTUNA F 11 S 500

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12014 · Cylindrical Grinding Machine

          FORTUNA - F 11 S 500 - - 1978 -

          Technical details
          grinding diameter 0200 mm︱grinding length 500 mm︱centre height 120 mm︱grinding wheel speed 15 m/sec︱swing dia. 260 mm︱total power requirement 5,5 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 3 x 2 x 1,5 m︱table speeds 0- 8 m/min︱angle of table min./max. 5/12 Grad︱grinding slide stroke 150 mm︱grinding slide swivable +/- 45 °︱workpiece swivable +/- 45 °︱grinding wheel size 400 x 40 mm︱workpiece turning speeds 30- 800 U/min︱max. workpiece weight -without tailstock 15 kg︱voltage 400 V︱
          Machine has a Finibalanx balancing arrangement and a Marposs measuring unit with sensor.
            grinding diameter 0200 mm
            grinding length 500 mm
            centre height 120 mm
            grinding wheel speed 15 m/sec
            swing dia. 260 mm
            total power requirement 5,5 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 3 x 2 x 1,5 m
            table speeds 0- 8 m/min
            angle of table min./max. 5/12 Grad
            grinding slide stroke 150 mm
            grinding slide swivable +/- 45 °
            workpiece swivable +/- 45 °
            grinding wheel size 400 x 40 mm
            workpiece turning speeds 30- 800 U/min
            max. workpiece weight -without t. 15 kg
            voltage 400 V
            Description :
            Machine has a Finibalanx balancing arrangement and a Marposs measuring unit
            with sensor.
          Datasheet
          Request / Contact
          used Cylindrical Grinding Machine KARSTENS ASA 16 A

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12064 · Cylindrical Grinding Machine

          KARSTENS - ASA 16 A - - 1970 -

          Technical details
          grinding diameter 0250 mm︱grinding length 750 mm︱centre height 125 mm︱total power requirement 4 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,5 x 1,5 x 1,6 m︱table speeds 0,05 - 5 m/min︱angle of table min./max. 9,5 Grad︱grinding slide stroke 280 mm︱grinding slide swivable +/- 180 °︱workpiece swivable +/- 90 °︱grinding wheel size 400x40x127 mm︱workpiece turning speeds 30 - 450 U/min︱max. workpiece weight -without tailstock 70 kg︱voltage 380 V︱
          Machine was completely reconditioned in 2009.
            grinding diameter 0250 mm
            grinding length 750 mm
            centre height 125 mm
            total power requirement 4 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,5 x 1,5 x 1,6 m
            table speeds 0,05 - 5 m/min
            angle of table min./max. 9,5 Grad
            grinding slide stroke 280 mm
            grinding slide swivable +/- 180 °
            workpiece swivable +/- 90 °
            grinding wheel size 400x40x127 mm
            workpiece turning speeds 30 - 450 U/min
            max. workpiece weight -without t. 70 kg
            voltage 380 V
            Description :
            Machine was completely reconditioned in 2009.
          Datasheet
          Request / Contact

          Internal Grinding Machine

          used Internal Grinding Machine VOUMARD 203

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-12012 · Internal Grinding Machine

          VOUMARD - 203 - - 1985 -

          Technical details
          internal diameter 1- 100 mm︱grinding depth 120 mm︱swing diameter 250 mm︱centre height 175 mm︱workpiece length - max. 500 mm︱grinding table stroke min./max.: 2- 300 mm︱table speed -stepless- 0- 20 m/min︱grinding spindle speed 3500- 63000 U/min︱work piece spindle speed (6) 125- 1000 U/min︱workpiece spindle swivable +/- -30/+90 °︱total power requirement 7,5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,6 x 1,7 x 2,0 m︱
            internal diameter 1- 100 mm
            grinding depth 120 mm
            swing diameter 250 mm
            centre height 175 mm
            workpiece length - max. 500 mm
            grinding table stroke min./max.: 2- 300 mm
            table speed -stepless- 0- 20 m/min
            grinding spindle speed 3500- 63000 U/min
            work piece spindle speed (6) 125- 1000 U/min
            workpiece spindle swivable +/- -30/+90 °
            total power requirement 7,5 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,6 x 1,7 x 2,0 m
            Description :

          Datasheet
          Request / Contact
          used Internal Grinding Machine VOUMARD 5 A

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1228 · Internal Grinding Machine

          VOUMARD - 5 A - - 1975 -

          Technical details
          internal diameter 5 - 200 mm︱grinding depth 250 mm︱swing diameter 330 mm︱centre height 180 mm︱workpiece length - max. 500 mm︱grinding table stroke min./max.: 3 / 600 mm︱table speed -stepless- 0 - 10 m/min︱grinding spindle speed 3600 - 40000 U/min︱work piece spindle speed (6) 65 - 600 U/min︱workpiece spindle swivable +/- 90 °︱total power requirement 7,5 kW︱weight of the machine ca. 2,9 / 0,7 t︱dimensions of the machine ca. 2.80 x 1.35 x 1.90 m︱
            internal diameter 5 - 200 mm
            grinding depth 250 mm
            swing diameter 330 mm
            centre height 180 mm
            workpiece length - max. 500 mm
            grinding table stroke min./max.: 3 / 600 mm
            table speed -stepless- 0 - 10 m/min
            grinding spindle speed 3600 - 40000 U/min
            work piece spindle speed (6) 65 - 600 U/min
            workpiece spindle swivable +/- 90 °
            total power requirement 7,5 kW
            weight of the machine ca. 2,9 / 0,7 t
            dimensions of the machine ca. 2.80 x 1.35 x 1.90 m
            Description :

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   
            •

            Профіль торговця: Karl Günter Wirths GmbH

          Зв'язатися з трейдером



            Карл Гюнтер Віртс ГмбХ
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050 "> 02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Профіль Трейдера

          Про нас - Wirths GmbH в Еннепеталі

          wirths gmbhКарл Г. Віртс заснував компанію в 1956 як механічну майстерню. 1961 розробив цех для пресування і формування штампів. У той час співробітники 30 працювали як майстри в робочій майстерні.
           
          Паралельно Карл Г. Віртс заснував цех по ремонту верстатів. Це також було початком для бізнесу верстатів.

          Умивальник був закритий 1972, але розвинувся бізнес-інструмент.

          У 1972 році було встановлено перший запас. До цього часу будівлі вантажопідйомністю до 50 т.

          На цьому складі ми завжди зберігаємо прибл. Машини 250.

          Ми не орієнтовані на одноразовий бізнес, а на довгостроковий бізнес у відносинах з нашими вітчизняними клієнтами та клієнтами з усіх куточків світу.

          ЗВ'ЯЖІТЬСЯ З НАМИ

          Wirths GmbHКарл Гюнтер Віртс ГмбХ
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Німеччина



          Karl Günter Wirths GmbH 58256 Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:
           
          ACHTUNG: NEUE FAX Nr. 02333 790555

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohrwerkstisch · Bügelsäge · Bügelsäge - Automatisch · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Endenbearbeitungsmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Gabelstapler · Handhebel-Schere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kreissäge - Automatisch · Messmaschine · Plan- und Spitzendrehbank · Plattenfeld · Pneumatische Presse · Profil- Ring- Biegemaschine · Querteilanlage · Radialbohrmaschine · Richtmaschine · Richtplatte · Richtpresse - Einständer · Rohrbiegemaschine · Rundschleifmaschine · Rundtisch-Bohrungs-Schleifmaschine · Schaufelbagger · Schleifbock · Schwenkbiegemaschine · Senkerodiermaschine · Spindelpresse · Spitzendrehmaschine · Stangenzuführung · Stanzautomat-Doppelständer · Säulenbohrmaschine · Tafelschere - hydraulisch · Tischbohrwerk · Werkzeug Voreinstellgerät · Zahnrad-Abwälzfräsmaschine - vertikal ·
          компендіум
          програмне забезпечення
          Вміст старих машин
          недоторканність приватного життя
          Йди за нами
          © 2000 - 2021, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені