Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Kemmerich Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe TOS- CELACOVICE SUI 80 x 6000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18756 · Center Lathe

          TOS- CELACOVICE - SUI 80 x 6000 - - 1998 -

          Technical details
          turning diameter over bed 800 mm︱turning diameter over slide rest 520 mm︱turning length 6000 mm︱main drive motor 15 kW︱spindle nose ISO 702 / Gr 11 ︱spindle bore 92 mm︱Torque 3200 Nm︱turning speed range 1 - 1800 U/min︱cross travel 440 mm︱tail stock ︱tailstock quill diameter 110 mm︱tailstock quill adjustment 210 mm︱total power requirement - kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 8,6 x 1,7 x 1,6 m︱
          69500 - DRO - 2 steadies, - 3 jaw-chuck - Tailstock - coolant
            turning diameter over bed 800 mm
            turning diameter over slide rest 520 mm
            turning length 6000 mm
            main drive motor 15 kW
            spindle nose ISO 702 / Gr 11
            spindle bore 92 mm
            Torque 3200 Nm
            turning speed range 1 - 1800 U/min
            cross travel 440 mm
            tailstock quill diameter 110 mm
            tailstock quill adjustment 210 mm
            total power requirement - kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 8,6 x 1,7 x 1,6 m
            Description :












            69500
            - DRO
            - 2 steadies,
            - 3 jaw-chuck
            - Tailstock
            - coolant

          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe OKUMA LU 45 2SC / 2000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18534 · CNC Lathe

          OKUMA - LU 45 2SC / 2000 - - 2011 - OSP P200 LA

          Technical details
          turning diameter 660 mm︱turning length 2000 mm︱control OSP P200 LA ︱greates pass round over bed 840 mm︱Main spindle: ︱turning speed range - main spindle 2 - 2800 min/-1︱power capacity - main spindel 45 kW︱spindle bore 130 mm︱bar material dia. 120 mm︱spindle nose A2-11 ︱chucking diameter 610 mm︱turret: ︱number of toolpositions 12 / 10 pos.︱axis stroke: ︱x-axis x1=440 - x2=305 mm︱z-axis 2090 / 2025 mm︱Tailstock: ︱diameter of quill 130 mm︱taper of center MT 5 ︱quill stroke 170 mm︱
          Lathe equipped with: - CNC control OSP P200 LA - 12-fold tool turret (VDI 40) above - 10-fold tool turret (VDI 40) below - C-axis 360 ° - tailstock - Chip conveyor NC-Run Time: 3200h and Cutting-Time: 2850h
            turning diameter 660 mm
            turning length 2000 mm
            control OSP P200 LA
            greates pass round over bed 840 mm
            turning speed range - main spind. 2 - 2800 min/-1
            power capacity - main spindel 45 kW
            spindle bore 130 mm
            bar material dia. 120 mm
            spindle nose A2-11
            chucking diameter 610 mm
            number of toolpositions 12 / 10 pos.
            x-axis x1=440 - x2=305 mm
            z-axis 2090 / 2025 mm
            diameter of quill 130 mm
            taper of center MT 5
            quill stroke 170 mm
            Description :
            Lathe equipped with:
            - CNC control OSP P200 LA
            - 12-fold tool turret (VDI 40) above
            - 10-fold tool turret (VDI 40) below
            - C-axis 360 °
            - tailstock
            - Chip conveyor

            NC-Run Time: 3200h and Cutting-Time: 2850h
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used  CNC Lathe - Inclined Bed Type HANNSA YTB 8540


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18377 · CNC Lathe - Inclined Bed Type

          HANNSA - YTB 8540 - - 2020 - FANUC 0iMate

          Technical details
          turning diameter 400 mm︱turning length 540 mm︱control FANUC 0iMate ︱turning diameter over bed slide 320 mm︱centre height 200 mm︱spindle motor 7,5 / 11 kW︱spindle turning speed range 4500 U/min︱chucking diameter 203 mm︱spindle nose ASA A2-6 ︱spindle hollow 62 mm︱spindle diameter in front bearing 100 mm︱max. workpiece weight between centres 900 kg︱rapid traverse: longitudinal and cross 24 mm/min︱x-travel 185 mm︱z-travel 540 mm︱tail stock ︱tailstock quill taper MT MT 4 ︱tailstock quill diameter 65 mm︱tailstock quill stroke 90 mm︱tailstock adjustment 410 mm︱
          - CNC control FANUC 0iMate - Tool turret LS 160A - 10-fold (25mm) - Chip Conveyor - Tailstock - Robot Interface - Auto-Door - Spray and Air Gun - Coolant - CE Sign - Tooling New Machine with 12 month warranty
            turning diameter 400 mm
            turning length 540 mm
            control FANUC 0iMate
            turning diameter over bed slide 320 mm
            centre height 200 mm
            spindle motor 7,5 / 11 kW
            spindle turning speed range 4500 U/min
            chucking diameter 203 mm
            spindle nose ASA A2-6
            spindle hollow 62 mm
            spindle diameter in front bearin. 100 mm
            max. workpiece weight between ce. 900 kg
            rapid traverse: longitudinal and. 24 mm/min
            x-travel 185 mm
            z-travel 540 mm
            tailstock quill taper MT MT 4
            tailstock quill diameter 65 mm
            tailstock quill stroke 90 mm
            tailstock adjustment 410 mm
            Description :
            - CNC control FANUC 0iMate
            - Tool turret LS 160A - 10-fold (25mm)
            - Chip Conveyor
            - Tailstock
            - Robot Interface
            - Auto-Door
            - Spray and Air Gun
            - Coolant
            - CE Sign
            - Tooling
            New Machine with 12 month warranty
          Datasheet
          Request / Contact
          used  CNC Lathe - Inclined Bed Type DOOSAN Puma TT 1800 SY


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18456 · CNC Lathe - Inclined Bed Type

          DOOSAN - Puma TT 1800 SY - - 2007 - Fanuc 18iTB

          Technical details
          turning diameter 230 mm︱turning length 230 mm︱spindle distance 980 mm︱control Fanuc 18iTB ︱spindle bore 65 mm︱y-axis +/- 50 mm︱cross travel X1/X2: 165 / 190 mm︱longitudinal travel Z1 / Z2: 700 / 720 mm︱spindle turning speed range 5000 U/min︱Live Tools ︱turning speed range 5000 U/min︱feed 20000 m/min︱rapid traverse 40 m/min︱spindle motor 22 kW︱total power requirement 75 kVA︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,8 x 2,2 x 2,3 m︱
          equipped with: - Fanuc 18 iTB CNC control - Main spindle, counter spindle - C axis - driven tools - Y-axis - 2x 12-fold revolver - Short bar loading magazine Master 880 Verso - Chip conveyor - Coolant unit
            turning diameter 230 mm
            turning length 230 mm
            spindle distance 980 mm
            control Fanuc 18iTB
            spindle bore 65 mm
            y-axis +/- 50 mm
            cross travel X1/X2: 165 / 190 mm
            longitudinal travel Z1 / Z2: 700 / 720 mm
            spindle turning speed range 5000 U/min
            turning speed range 5000 U/min
            feed 20000 m/min
            rapid traverse 40 m/min
            spindle motor 22 kW
            total power requirement 75 kVA
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,8 x 2,2 x 2,3 m
            Description :
            equipped with:
            - Fanuc 18 iTB CNC control
            - Main spindle, counter spindle
            - C axis
            - driven tools
            - Y-axis
            - 2x 12-fold revolver
            - Short bar loading magazine Master 880 Verso
            - Chip conveyor
            - Coolant unit
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center DMG-MORI EcoTurn 450 V3


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18177 · CNC Turning- and Milling Center

          DMG-MORI - EcoTurn 450 V3 - - 2016 - Siemens 840 D SL SHOPTURN

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840 D SL SHOPTURN ︱turning dia. over face-slide 480 mm︱turning speeds 4000 1/min︱spindle 17,5 / 12,5 kW︱turret head 12 pos.︱turret head drive 4,2 kW︱rotational speed range of tools 4000 1/min︱tailstock quill taper MT 5 ︱quill stroke 500 mm︱rapid travel x/y/z 30 m/min︱bar capacity 65 mm︱workpiece weight max. 800 kg︱total power requirement 27 kVA︱weight of the machine ca. 5,8 t︱
          equipped with: - Siemens 840D SL - 12 driven tools (VDI 40) - Chip conveyor - Tailstock - 3 jaw chuck dia 250mm - Coolant pump 12bar
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840 D SL SHOPTURN
            turning dia. over face-slide 480 mm
            turning speeds 4000 1/min
            spindle 17,5 / 12,5 kW
            turret head 12 pos.
            turret head drive 4,2 kW
            rotational speed range of tools 4000 1/min
            tailstock quill taper MT 5
            quill stroke 500 mm
            rapid travel x/y/z 30 m/min
            bar capacity 65 mm
            workpiece weight max. 800 kg
            total power requirement 27 kVA
            weight of the machine ca. 5,8 t
            Description :
            equipped with:
            - Siemens 840D SL
            - 12 driven tools (VDI 40)
            - Chip conveyor
            - Tailstock
            - 3 jaw chuck dia 250mm
            - Coolant pump 12bar


          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG-MORI SEIKI NT 4250 / 1500 S


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17609 · CNC Turning- and Milling Center

          DMG-MORI SEIKI - NT 4250 / 1500 S - - 2015 - F31i A5

          Technical details
          turning diameter 660 / 350 mm︱turning length 1542 mm︱control F31i A5 ︱swing diameter max. 730 mm︱Main spindle: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - main spindel 26 / 22 kW︱Bar feed 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8 ︱C-Axis 0,001 °︱chucking diameter 300 mm︱Subspindel: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - Sub spindle 26 / 22 kW︱Bar feed max. 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8
          equipped with: - CNC Control F31i A5 - (Spindle 1) KITAGAWA 12" Hollow Chuck - (Spindle 2) KITAGAWA 12" Hollow Chuck - Tool spindle full indexing specifications - Spindle 2 tailstock specifications - Tool storage capacity 40 tools(Capto C6) - Coolant gun - Super-high pressure coolant system(7.0MPa) - Coolant cooling system (separate type) - Mist collector I/F(duct only, dia.200mm) - Chip conveyor (right discharge, hinge type)(/1500) - In-machine workpiece tool presetter for tool spindle(in-out type) - Direct scal feedback for X-axis(tool spindle) - Direct scal feedback for Y-axis(tool spindle) - Direct scal feedback for Z-axis(tool spindle)(/1500) - Chuck foot switch(double) for Main and Counter spindle - Signal lower 3 layers(Red, yellow, green) LED type - Total counter - Manual pulse generator(separate type) - Cooling unit for electrical cabinet - Programming resolution mutipiled by 1/10 - Memory card for Data server(CF card 1 GB) - Playback - Spindle 1 hobbing function - Automatic corner override - Coordinate system rotation - Addition of optional block skip (soft key type 2-9) - Direct drawing dimension programming - Interruption type custom macro - Tool offsets 480 sets in total - KCs mark 65kVA E30373 EMC(including cable) - Invo-Milling package Capto C6 CE-Sign and only 5h (!!) Working Hours
            turning diameter 660 / 350 mm
            turning length 1542 mm
            control F31i A5
            swing diameter max. 730 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - main spindel 26 / 22 kW
            Bar feed 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            C-Axis 0,001 °
            chucking diameter 300 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - Sub spindle 26 / 22 kW
            Bar feed max. 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            Description :
            equipped with:
            - CNC Control F31i A5

            - (Spindle 1) KITAGAWA 12" Hollow Chuck
            - (Spindle 2) KITAGAWA 12" Hollow Chuck
            - Tool spindle full indexing specifications
            - Spindle 2 tailstock specifications
            - Tool storage capacity 40 tools(Capto C6)
            - Coolant gun
            - Super-high pressure coolant system(7.0MPa)
            - Coolant cooling system (separate type)
            - Mist collector I/F(duct only, dia.200mm)
            - Chip conveyor (right discharge, hinge type)(/1500)
            - In-machine workpiece tool presetter for tool spindle(in-out type)
            - Direct scal feedback for X-axis(tool spindle)
            - Direct scal feedback for Y-axis(tool spindle)
            - Direct scal feedback for Z-axis(tool spindle)(/1500)
            - Chuck foot switch(double) for Main and Counter spindle
            - Signal lower 3 layers(Red, yellow, green) LED type
            - Total counter
            - Manual pulse generator(separate type)
            - Cooling unit for electrical cabinet
            - Programming resolution mutipiled by 1/10
            - Memory card for Data server(CF card 1 GB)
            - Playback
            - Spindle 1 hobbing function
            - Automatic corner override
            - Coordinate system rotation
            - Addition of optional block skip (soft key type 2-9)
            - Direct drawing dimension programming
            - Interruption type custom macro
            - Tool offsets 480 sets in total
            - KCs mark 65kVA E30373 EMC(including cable)
            - Invo-Milling package Capto C6

            CE-Sign and only 5h (!!) Working Hours

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center TAKISAWA TCY 200Y L5


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18498 · CNC Turning- and Milling Center

          TAKISAWA - TCY 200Y L5 - - 2015 - Fanuc 32i-B

          Technical details
          turning diameter 220 mm︱turning length 454 mm︱control Fanuc 32i-B ︱swing dia. mm︱turning speed range - spindle 3200 U/min︱spindle motor 7.5/5.5 kW︱spindle bore 51 mm︱Turret 1 ︱Spindle speed driven tools 0-6000 min -1︱drive capacity - spindle motor 3.7/2.2 kW︱Traverse X-Axis 1 mm︱Traverse Z-Axis 1 mm︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 24 m/min︱travel -y axis +50 / -50 mm︱rapid motion - y-axis 10 m/min︱tool change unit 12-fach (VDI 40) ︱total power requirement kVA︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 2,9 ×1,8 x 1,7 m︱
          equipped with: - CNC control FANUC 32i-B - 3-jaw Chuck SMW AutoBlok (210mm) - C-Axe / Y-Axe - Drive tool Holder: 2 pcs radial, 2 pcs Achsial - Toolholder - Chip Conveyor - Tailstock approx only 300 Work Hours
            turning diameter 220 mm
            turning length 454 mm
            control Fanuc 32i-B
            turning speed range - spindle 3200 U/min
            spindle motor 7.5/5.5 kW
            spindle bore 51 mm
            Spindle speed driven tools 0-6000 min -1
            drive capacity - spindle motor 3.7/2.2 kW
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 24 m/min
            travel -y axis +50 / -50 mm
            rapid motion - y-axis 10 m/min
            tool change unit 12-fach (VDI 40)
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 2,9 ×1,8 x 1,7 m
            Description :
            equipped with:
            - CNC control FANUC 32i-B
            - 3-jaw Chuck SMW AutoBlok (210mm)
            - C-Axe / Y-Axe
            - Drive tool Holder: 2 pcs radial, 2 pcs Achsial
            - Toolholder
            - Chip Conveyor
            - Tailstock

            approx only 300 Work Hours
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG-GILDEMEISTER CTX 450 ecoline


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18539 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX 450 ecoline - - 2014 - Siemens 840D

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840D ︱standard turning dia. 400 mm︱greates pass round over bed 650 mm︱swing diameter max. over bed cover 465 mm︱Main spindle: ︱turning speed range - main spindle 4000 min/-1︱power capacity - main spindel kW︱max. Torque Nm︱spindle bearing diameter mm︱chuck diameter mm︱max. usable bar diameter mm︱spindle nose 170h5 ︱C-Axis 0,001 °︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 40 ︱Number of driven toolspositions 12 pos.︱Spindle speed - driven tool stations 4000 min -1︱
          - CNC control Siemens Sinumerik 840D sl - C-Axe - 12- fold Revolver, driven Tools (VDI 40) - Chip Conveyor - 3-jaw Chuck 16700h Running- & 2700h Spindle Hours
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840D
            standard turning dia. 400 mm
            greates pass round over bed 650 mm
            swing diameter max. over bed cov. 465 mm
            turning speed range - main spind. 4000 min/-1
            spindle nose 170h5
            C-Axis 0,001 °
            number of toolpositions 12 pos.
            tool taper VDI 40
            Number of driven toolspositions 12 pos.
            Spindle speed - driven tool stat. 4000 min -1
            Description :
            - CNC control Siemens Sinumerik 840D sl
            - C-Axe
            - 12- fold Revolver, driven Tools (VDI 40)
            - Chip Conveyor
            - 3-jaw Chuck

            16700h Running- & 2700h Spindle Hours
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK INTEGREX i400


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18320 · CNC Turning- and Milling Center

          MAZAK - INTEGREX i400 - - 2014 - Mazatrol Matrix 2

          Technical details
          turning diameter 760 mm︱workpiece length - max. 1524 mm︱control Mazatrol Matrix 2 ︱swing diameter 760 mm︱clamping range for bar work 102 mm︱workpiece weight 1000 kg︱------------ MAIN SPINDLE ------------ ︱turning speeds 35 - 3300 U/min︱passage of spindle 112 mm︱c-axis 1 ︱spindle motor 30 kW︱travel -x axis 630 mm︱travel -y axis 230 mm︱travel -z axis 1585 mm︱rapid travel x/y/z 38000 x 26000x 38000 mm/min︱milling spindle ︱spindle motor 18,5 kW︱milling head speed 12000 U/min︱weight of the machine ca. 12,7 t︱dimensions of the machine ca. 4,9 x 2,4 x 2,8 m︱
          - CNC Control Mazatrol Matrix 2 - ATC 20-fold
            turning diameter 760 mm
            workpiece length - max. 1524 mm
            control Mazatrol Matrix 2
            swing diameter 760 mm
            clamping range for bar work 102 mm
            workpiece weight 1000 kg
            turning speeds 35 - 3300 U/min
            passage of spindle 112 mm
            c-axis 1
            spindle motor 30 kW
            travel -x axis 630 mm
            travel -y axis 230 mm
            travel -z axis 1585 mm
            rapid travel x/y/z 38000 x 26000x 38000 mm/min
            spindle motor 18,5 kW
            milling head speed 12000 U/min
            weight of the machine ca. 12,7 t
            dimensions of the machine ca. 4,9 x 2,4 x 2,8 m
            Description :

            - CNC Control Mazatrol Matrix 2
            - ATC 20-fold
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG MORI CTX beta 1250 TC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18742 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 1250 TC - - 2012 - Siemens 840D sl

          Technical details
          turning diameter 500 mm︱turning length 1200 mm︱control Siemens 840D sl ︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 4000 min/-1︱power capacity - main spindel 40 / 33 kW︱max. Torque 700 / 580 Nm︱C-Axis 0,0001 °︱spindle diameter 102 mm︱milling spindle ︱milling spindle motor 22,5 /19 ︱milling head speed 20000 U/min︱b-axis +/- 110 °︱axis stroke: ︱x-axis 490 mm︱y-axis +/- 125 mm︱z-axis 1300 mm︱feeds: ︱rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min︱
          CNC - Turning and milling centre - CNC control Siemens 840D / Celos - C-axis (0,0001°) - Milling head with B-axis - Y-axis - Coolant device - Chip conveyor - Linear scales in the linear axes of the moving column (X1/Y1/Z1) - Water-cooled spindles and motor cooling X/Y/Z Accuracy in the µm range Positioning accuracy max. 6 µm and repeatability max. < 2 µm 10600h running & 3650h spindle hours
            turning diameter 500 mm
            turning length 1200 mm
            control Siemens 840D sl
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 4000 min/-1
            power capacity - main spindel 40 / 33 kW
            max. Torque 700 / 580 Nm
            C-Axis 0,0001 °
            spindle diameter 102 mm
            milling spindle motor 22,5 /19
            milling head speed 20000 U/min
            b-axis +/- 110 °
            x-axis 490 mm
            y-axis +/- 125 mm
            z-axis 1300 mm
            rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min
            Description :
            CNC - Turning and milling centre
            - CNC control Siemens 840D / Celos
            - C-axis (0,0001°)
            - Milling head with B-axis
            - Y-axis
            - Coolant device
            - Chip conveyor
            - Linear scales in the linear axes of the moving column (X1/Y1/Z1)
            - Water-cooled spindles and motor cooling X/Y/Z
            Accuracy in the µm range
            Positioning accuracy max. 6 µm and repeatability max. < 2 µm

            10600h running & 3650h spindle hours
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK INTEGREX e-500H II


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17303 · CNC Turning- and Milling Center

          MAZAK - INTEGREX e-500H II - - 2012 - Mazatrol MATRIX 2

          Technical details
          turning diameter 820 mm︱turning length 3050 mm︱travel -x axis 870 mm︱travel -z axis 3122 mm︱travel -y axis 500 mm︱control Mazatrol MATRIX 2 ︱spindle turning speed range 35 - 3300 U/min︱spindle motor 30 kW︱feed - longitudinal/cross 1 - 40000 mm/min︱tool taper capto C8 ︱total power requirement 37 kVA︱weight of the machine ca. 28,5 t︱dimensions of the machine ca. 7,92 x 3,67 m︱
          Machine equipped with: - MAZAK Mazatrol Matrix 2 - tail stock (2990mm) - 80-fold tool changer - 5 axis simultanous milling & Turning - milling spindle with 37kW and 10.000 rpm - chip conveyor - misc. arbors - Mazak Monitoring System, online service - steady rest SMW SLU 5.1 (dia 85-350mm) - Capto C8 - CE Sign Power on: 25.400h - Automatic cutting Time: 5900h
            turning diameter 820 mm
            turning length 3050 mm
            travel -x axis 870 mm
            travel -z axis 3122 mm
            travel -y axis 500 mm
            control Mazatrol MATRIX 2
            spindle turning speed range 35 - 3300 U/min
            spindle motor 30 kW
            feed - longitudinal/cross 1 - 40000 mm/min
            tool taper capto C8
            total power requirement 37 kVA
            weight of the machine ca. 28,5 t
            dimensions of the machine ca. 7,92 x 3,67 m
            Description :
            Machine equipped with:
            - MAZAK Mazatrol Matrix 2
            - tail stock (2990mm)
            - 80-fold tool changer
            - 5 axis simultanous milling & Turning
            - milling spindle with 37kW and 10.000 rpm
            - chip conveyor
            - misc. arbors
            - Mazak Monitoring System, online service
            - steady rest SMW SLU 5.1 (dia 85-350mm)
            - Capto C8
            - CE Sign

            Power on: 25.400h - Automatic cutting Time: 5900h
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GIANA GGtronic Triple-X 1350


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17954 · CNC Turning- and Milling Center

          GIANA - GGtronic Triple-X 1350 - - 2011 - Sinumerik 840D

          Technical details
          turning diameter 2600 mm︱turning length 12000 mm︱control Sinumerik 840D ︱turning diameter over bed slide 2600 mm︱turning speeds 1 - 350 U/min︱spindle drive 100 kW︱spindle bore 155 mm︱max. workpiece weight between centres 40 t︱z-axis 12000 mm︱x-axis 1580 mm︱feed range 1 - 12.000 mm/min︱rapid traverse 12 m/min︱faceplate 2400 mm︱tailstock quill diameter 460 mm︱tailstock quill stroke 200 mm︱milling spindle turning speed range: 1 -3000 U/min︱milling spindle drive 28 / 34,5 kW︱spindle diameter in front bearing 304,8 mm︱b-axis 1-3000 U/min︱milling spindle drive 28/34,5 kW︱
          Heavy Duty Turning- & Milling Center with 2 Beds equipped with: - CNC-Control Siemens Sinumerik 840 DE -SL - 1 Steady Rest dia 800-1800mm - 20t - 1st carriage for turning, Internal Boring, Tapping, Boring & Milling - 2nd carriage with Special-Column with Y-Axis and Milling Head (B-Spindle) with Radial- and Axial stroke of 1235mm (ISO 50) & Coolant through Spindle - 3rd carriage for internal turning with a boring bar to a depth of 2000 mm - C-Axis (interpolate with X-, Y- & Z-Axis) - Sauter Type 0.5.480.540 (VDI 60) Tool Holder - Chip Conveyor - motorized Tailstock - IKZ - Synchron Tapping With a B-axis machine, parts can be machined both on 5 sides, in a single setup, or by using all 5 axes to machine any complex profile. Positioning precision ± 0.01 and repeatability ± 0.005 mm. The machine structure, built entirely of cast iron, is strong enough to take anti-vibration boring bars, suitable for internal boring to a depth of over 4,000 mm.
            turning diameter 2600 mm
            turning length 12000 mm
            control Sinumerik 840D
            turning diameter over bed slide 2600 mm
            turning speeds 1 - 350 U/min
            spindle drive 100 kW
            spindle bore 155 mm
            max. workpiece weight between ce. 40 t
            z-axis 12000 mm
            x-axis 1580 mm
            feed range 1 - 12.000 mm/min
            rapid traverse 12 m/min
            faceplate 2400 mm
            tailstock quill diameter 460 mm
            tailstock quill stroke 200 mm
            milling spindle turning speed ra. 1 -3000 U/min
            milling spindle drive 28 / 34,5 kW
            spindle diameter in front bearin. 304,8 mm
            b-axis 1-3000 U/min
            milling spindle drive 28/34,5 kW
            Description :
            Heavy Duty Turning- & Milling Center with 2 Beds
            equipped with:
            - CNC-Control Siemens Sinumerik 840 DE -SL
            - 1 Steady Rest dia 800-1800mm - 20t
            - 1st carriage for turning, Internal Boring, Tapping, Boring & Milling
            - 2nd carriage with Special-Column with Y-Axis and Milling Head (B-Spindle)
            with Radial- and Axial stroke of 1235mm (ISO 50) & Coolant through Spindle
            - 3rd carriage for internal turning with a boring bar to a depth of 2000 mm
            - C-Axis (interpolate with X-, Y- & Z-Axis)
            - Sauter Type 0.5.480.540 (VDI 60) Tool Holder
            - Chip Conveyor
            - motorized Tailstock
            - IKZ
            - Synchron Tapping

            With a B-axis machine, parts can be machined both on 5 sides, in a single
            setup, or by using all 5 axes to machine any complex profile.
            Positioning precision ± 0.01 and repeatability ± 0.005 mm.
            The machine structure, built entirely of cast iron, is strong enough to take
            anti-vibration boring bars, suitable for internal boring to a depth of over
            4,000 mm.

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MORI SEIKI NT 4300 DCG x 1500 SZ


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18512 · CNC Turning- and Milling Center

          MORI SEIKI - NT 4300 DCG x 1500 SZ - - 2010/2020 - MSX 711 Maps IV

          Technical details
          turning diameter 660 mm︱turning length 1518 mm︱control MSX 711 Maps IV︱greates pass round over bed 730 mm︱swing diameter over bed slide 730 mm︱Distance between centers 1760 mm︱max. turning diameter 660 mm︱bar material dia. 90 mm︱Axis stroke X1 (tool spindle) 750 mm︱travel -y axis ± 210 mm︱Axis stroke Z1 (tool spindle) 1550+100 (für ATC) mm︱Axis stroke B ± 120 ° / degr.︱Movement X2 / Z2 - Axis 195 / 1550 mm︱main spindle speeds: 3000 min-¹︱spindle bore 105 mm︱c-axis 0,0001 ° (degr.)︱spindle bearing diameter 160 mm︱ 1 ︱b-axis 0,0001 °︱Tool spindel speed 12.000 min-¹︱
          Highly efficient integrated milling-turning center with high precision. 2020: The milling spindle is new (changed by Mori seiki team) and a complete check-up of the machine - Main & counter spindle with: - Chuck dia 400mm - C axes 360 x 0.001 ° - Axes X1, X2 - Y - Z1, Z2 - A - B - C1, C2 - Magazine for 40 tools Capto C6 - Tool turret 10-fold - Chip conveyor with filter system and high pressure pump 25 bar (IKZ) - Compressed air supply through the spindle Operating hours: 5800h - Cutting time: 1620h This machine has been successfully retrofitted in 2020 as follows: - New milling spindle and head geometry. - Cleaning and degreasing of the tool changer - Dismantling, cleaning and greasing of chucks and clamping pot (annual maintenance) - Dismantling, cleaning and cleaning with bactericide of the conveyors and lubricant tank, as well as all the pumps with replacement of one of them.
            turning diameter 660 mm
            turning length 1518 mm
            control MSX 711 Maps IV
            greates pass round over bed 730 mm
            swing diameter over bed slide 730 mm
            Distance between centers 1760 mm
            max. turning diameter 660 mm
            bar material dia. 90 mm
            Axis stroke X1 (tool spindle) 750 mm
            travel -y axis ± 210 mm
            Axis stroke Z1 (tool spindle) 1550+100 (für ATC) mm
            Axis stroke B ± 120 ° / degr.
            Movement X2 / Z2 - Axis 195 / 1550 mm
            main spindle speeds: 3000 min-¹
            spindle bore 105 mm
            c-axis 0,0001 ° (degr.)
            spindle bearing diameter 160 mm
            1
            b-axis 0,0001 °
            Tool spindel speed 12.000 min-¹
            Description :
            Highly efficient integrated milling-turning center with high precision.
            2020: The milling spindle is new (changed by Mori seiki team) and a
            complete check-up of the machine
            - Main & counter spindle with:
            - Chuck dia 400mm
            - C axes 360 x 0.001 °
            - Axes X1, X2 - Y - Z1, Z2 - A - B - C1, C2
            - Magazine for 40 tools Capto C6
            - Tool turret 10-fold
            - Chip conveyor with filter system and high pressure pump 25 bar (IKZ)
            - Compressed air supply through the spindle

            Operating hours: 5800h - Cutting time: 1620h
            This machine has been successfully retrofitted in 2020 as follows:

            - New milling spindle and head geometry.
            - Cleaning and degreasing of the tool changer
            - Dismantling, cleaning and greasing of chucks and clamping pot (annual
            maintenance)
            - Dismantling, cleaning and cleaning with bactericide of the conveyors and
            lubricant tank, as well as all the pumps with replacement of one of them.
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center NILES-SIMMONS N 50 MC x 6000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16843 · CNC Turning- and Milling Center

          NILES-SIMMONS - N 50 MC x 6000 - - 2009 - Siemens Sinumerik 840 D

          Technical details
          turning diameter 1300 mm︱turning length 6000 mm︱control Siemens Sinumerik 840 D ︱turning diameter over slide 1250 mm︱spindle motor 78 / 87 kW︱spindle turning speed - stepless 10 - 1244 U/min︱max. torque on the spindle 9880 / 2845 Nm︱ 225 mm︱spindle diameter in front bearing 360 mm︱x-axis -20 -- 1050 mm︱y-axis -400 / +395 mm︱z-axis 8070 mm︱milling spindle drive 38 / 48,3 kW︱milling head speed 3500 U/min︱milling spindle - taper HSK 100 A ︱milling spindle diameter 110 mm︱b-axis -105 / +95 °︱solution in B-axis 0,001 Grad︱ kg︱ 750 kg︱
          Turning- & Milling Machine, used for producing marine crankshafts. equipped with: - CNC Control SIEMENS 840D - Milling Spindle HSK 100A - b-Axis - C-Axis 0,001° - SMW Chuck dia 630mm - ATC 2x 48-fold (HSK-A 100) - Chip Conveyor - Coolant - 3 Steadies SMW-Autoblok SO-A-ZSW (dia 100-450mm) Spinlde Hours: 2.174h
            turning diameter 1300 mm
            turning length 6000 mm
            control Siemens Sinumerik 840 D
            turning diameter over slide 1250 mm
            spindle motor 78 / 87 kW
            spindle turning speed - stepless 10 - 1244 U/min
            max. torque on the spindle 9880 / 2845 Nm
            225 mm
            spindle diameter in front bearin. 360 mm
            x-axis -20 -- 1050 mm
            y-axis -400 / +395 mm
            z-axis 8070 mm
            milling spindle drive 38 / 48,3 kW
            milling head speed 3500 U/min
            milling spindle - taper HSK 100 A
            milling spindle diameter 110 mm
            b-axis -105 / +95 °
            solution in B-axis 0,001 Grad
            750 kg
            Description :
            Turning- & Milling Machine, used for producing marine crankshafts.
            equipped with:
            - CNC Control SIEMENS 840D
            - Milling Spindle HSK 100A
            - b-Axis
            - C-Axis 0,001°
            - SMW Chuck dia 630mm
            - ATC 2x 48-fold (HSK-A 100)
            - Chip Conveyor
            - Coolant
            - 3 Steadies SMW-Autoblok SO-A-ZSW (dia 100-450mm)
            Spinlde Hours: 2.174h
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK INTEGREX e-500 HS II x 3000U


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18164 · CNC Turning- and Milling Center

          MAZAK - INTEGREX e-500 HS II x 3000U - - 2008 - Mazatrol

          Technical details
          turning diameter 820 mm︱turning length 3048 mm︱travel -x axis 870 mm︱travel -z axis 3122 mm︱travel -y axis 500 mm︱control Mazatrol ︱spindle turning speed range 35 - 3300 U/min︱spindle motor 30 kW︱feed - longitudinal/cross 1 - 40000 mm/min︱tool taper BT 50 ︱b-axis 240 °︱c-axis 360 °︱total power requirement 37 kVA︱weight of the machine ca. 28 t︱dimensions of the machine ca. 7,92 x 3,67 m︱
          Machine equipped with: - MAZAK Mazatrol Matrix - Milling Head (B-Axis) 240°, Spindle 37kW and 10.000 U/min - 40-fold tool changer (BT 50) - oposed spindle with 18" chuck - 5 axis simultanous milling & Turning - chip conveyor - Hydr. Steady SMW SLU 5.1-MS (dia 85-350mm) - Cooling through Milling Head Power On: 37550h - Auto-Operation: 6350h - Auto-Cutting: 3950h
            turning diameter 820 mm
            turning length 3048 mm
            travel -x axis 870 mm
            travel -z axis 3122 mm
            travel -y axis 500 mm
            control Mazatrol
            spindle turning speed range 35 - 3300 U/min
            spindle motor 30 kW
            feed - longitudinal/cross 1 - 40000 mm/min
            tool taper BT 50
            b-axis 240 °
            c-axis 360 °
            total power requirement 37 kVA
            weight of the machine ca. 28 t
            dimensions of the machine ca. 7,92 x 3,67 m
            Description :
            Machine equipped with:
            - MAZAK Mazatrol Matrix
            - Milling Head (B-Axis) 240°, Spindle 37kW and 10.000 U/min
            - 40-fold tool changer (BT 50)
            - oposed spindle with 18" chuck
            - 5 axis simultanous milling & Turning
            - chip conveyor
            - Hydr. Steady SMW SLU 5.1-MS (dia 85-350mm)
            - Cooling through Milling Head

            Power On: 37550h - Auto-Operation: 6350h - Auto-Cutting: 3950h
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA Multus B 300


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18804 · CNC Turning- and Milling Center

          OKUMA - Multus B 300 - - 2005 - OSP-200 L

          Technical details
          turning diameter 630 mm︱turning length 900 mm︱control OSP-200 L ︱turning spindle 38 - 5000 U/min︱spindle motor 15 / 11 kW︱milling spindle 6.000 U/min︱spindle motor 14/10 kW︱spindle bore 62 mm︱chucking diameter 254 mm︱travel -x axis 580 mm︱travel -z axis 935 mm︱travel -y axis -80 / +80 mm︱rapid traverse 40 / 26 / 40 m/min︱b-axis 225 / 0,001 °︱tool piece magazine with 40 ︱Tool bore HSK A63 ︱tailstock taper MT 5 ︱total power requirement 29,6 kVA︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 5 x 3 x 2,7 mm︱
          CNC Turning & Milling Center - equipped with: - CNC-Control OSP-200L - Chip conveyor - Coolant through the milling tools, - Helical interpolation in B-axes - Y-axes turning. 23970h Working Hours
            turning diameter 630 mm
            turning length 900 mm
            control OSP-200 L
            turning spindle 38 - 5000 U/min
            spindle motor 15 / 11 kW
            milling spindle 6.000 U/min
            spindle motor 14/10 kW
            spindle bore 62 mm
            chucking diameter 254 mm
            travel -x axis 580 mm
            travel -z axis 935 mm
            travel -y axis -80 / +80 mm
            rapid traverse 40 / 26 / 40 m/min
            b-axis 225 / 0,001 °
            tool piece magazine with 40
            Tool bore HSK A63
            tailstock taper MT 5
            total power requirement 29,6 kVA
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 5 x 3 x 2,7 mm
            Description :
            CNC Turning & Milling Center - equipped with:
            - CNC-Control OSP-200L
            - Chip conveyor
            - Coolant through the milling tools,
            - Helical interpolation in B-axes
            - Y-axes turning.

            23970h Working Hours
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DOOSAN PUMA 700 M


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18527 · CNC Turning- and Milling Center

          DOOSAN - PUMA 700 M - - 2002 - FANUC 18i-T

          Technical details
          turning diameter 900 mm︱turning length 1600 mm︱control FANUC 18i-T ︱swing dia. 1030 mm︱bar material dia. 164 mm︱spindle bore 164 mm︱travel -x axis 471 mm︱travel -z axis 1600 mm︱rapid travel - longitudinal/face 12 / 16 m/min︱spindle turning speed range 1500 U/min︱spindle drive 45 kW︱turret (x-stations) 12 ︱power capacity 11 kW︱Tools speed 3000 U/min︱total power requirement 104 kVA︱weight of the machine ca. 17 t︱dimensions of the machine ca. 5,4 x 2,2 x 2,2 m︱
          High precision Turning and Milling Centre - CNC Control FANUC 18i-T - Toolrevolver 12-fold with driven tools 11KW - Counter Holder - Chip Conveyor
            turning diameter 900 mm
            turning length 1600 mm
            control FANUC 18i-T
            swing dia. 1030 mm
            bar material dia. 164 mm
            spindle bore 164 mm
            travel -x axis 471 mm
            travel -z axis 1600 mm
            rapid travel - longitudinal/face 12 / 16 m/min
            spindle turning speed range 1500 U/min
            spindle drive 45 kW
            turret (x-stations) 12
            power capacity 11 kW
            Tools speed 3000 U/min
            total power requirement 104 kVA
            weight of the machine ca. 17 t
            dimensions of the machine ca. 5,4 x 2,2 x 2,2 m
            Description :
            High precision Turning and Milling Centre
            - CNC Control FANUC 18i-T
            - Toolrevolver 12-fold with driven tools 11KW
            - Counter Holder
            - Chip Conveyor

          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used  Facing and Centering Lathe ZERBST DP 1/ S3 x 1500


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15734 · Facing and Centering Lathe

          ZERBST - DP 1/ S3 x 1500 - - 1996 - Siemens Sinumerik 820 T

          Technical details
          turning diameter over bed 1580 mm︱turning diameter over slide rest 1000 mm︱turning length 1500 mm︱faceplate diameter 1250 mm︱faceplate turning speed range 1- 458 U/min︱centre height 800 mm︱workpiece weight 10000 kg︱max. torque on the spindle 20000 Nm︱Control Siemens Sinumerik 820 T ︱total power requirement 55 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 0 m︱
          equipped with: - CNC Control Siemens 820T - 4-fold Tool Holder - counter Stay
            turning diameter over bed 1580 mm
            turning diameter over slide rest 1000 mm
            turning length 1500 mm
            faceplate diameter 1250 mm
            faceplate turning speed range 1- 458 U/min
            centre height 800 mm
            workpiece weight 10000 kg
            max. torque on the spindle 20000 Nm
            Control Siemens Sinumerik 820 T
            total power requirement 55 kW
            Description :
            equipped with:
            - CNC Control Siemens 820T
            - 4-fold Tool Holder
            - counter Stay
          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe ZERBST DXP5 x 3000 CNC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16355 · Facing Lathe

          ZERBST - DXP5 x 3000 CNC - - 1994/2012 - Siemens Sinumerik 840 D

          Technical details
          faceplate diameter 4000 mm︱turning diameter over slide rest 3100 mm︱turning length 3000 mm︱main drive motor 65 kW︱Control Siemens Sinumerik 840 D ︱turning diameter in the pit 5280 mm︱turning diameter over plate 3100 mm︱centre distance 3000 mm︱bed length 4700 mm︱bed height over floor 610 mm︱longitudinal movement of bed slide 2800 mm︱cross slide - travel 900 mm︱workpiece weight max. 300 / 160 / 100 kN︱main spindle bore 170 mm︱turning speed range - stepless 0,7 - 56 U/min︱feed 1,0 - 1000 mm/min︱rapid traverse 6000 m/min︱c-axis 0 - 0,0226 min-1︱tail stock ︱tailstock quill diameter 220 mm︱
          2012 overhauled and with new CNC control: - CNC Control unit Siemens 840 D - tailstock - milling unit RDR Type: UM 32 - 18,5kW (SK 50) - Electric grinding spindle TSEV 140 x 1400 7,5kW - 1500 rpm - worm gear (C-axis) - floor plates Workpieces up to 6300mm diameter were last manufactured on the machine!
            faceplate diameter 4000 mm
            turning diameter over slide rest 3100 mm
            turning length 3000 mm
            main drive motor 65 kW
            Control Siemens Sinumerik 840 D
            turning diameter in the pit 5280 mm
            turning diameter over plate 3100 mm
            centre distance 3000 mm
            bed length 4700 mm
            bed height over floor 610 mm
            longitudinal movement of bed sli. 2800 mm
            cross slide - travel 900 mm
            workpiece weight max. 300 / 160 / 100 kN
            main spindle bore 170 mm
            turning speed range - stepless 0,7 - 56 U/min
            feed 1,0 - 1000 mm/min
            rapid traverse 6000 m/min
            c-axis 0 - 0,0226 min-1
            tailstock quill diameter 220 mm
            Description :
            2012 overhauled and with new CNC control:
            - CNC Control unit Siemens 840 D
            - tailstock
            - milling unit RDR Type: UM 32 - 18,5kW (SK 50)
            - Electric grinding spindle TSEV 140 x 1400 7,5kW - 1500 rpm
            - worm gear (C-axis)
            - floor plates

            Workpieces up to 6300mm diameter were last manufactured on the machine!
          Datasheet
          Request / Contact

          Hardturning & Grinding Center

          used  Hardturning & Grinding Center BUDERUS CNC 235 DH-I-T-SL


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18522 · Hardturning & Grinding Center

          BUDERUS - CNC 235 DH-I-T-SL - - 2012 - Siemens Sinumerik 840D

          Technical details
          workpiece length 150 mm︱slide travel X-axis 1060 mm︱z-travel 280 mm︱swing diameter 320 mm︱control Siemens Sinumerik 840D ︱rapid speed 0 - 30 m/min︱work piece spindle speed 0 - 6000 U/min︱flange: ︱workpiece spindle - bore 45 mm︱diameter 220 mm︱c-axis zur Positionierung ︱total power requirement 65 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. - m︱
          The CNC 235 vertical hard machining center with vertical workpiece spindle allows the use as single-purpose machine for - Internal grinding - External grinding - Hard Turning Furthermore, these processes can be combined with each other and be supplemented by other technologies. equipped with: - CNC Control Siemens 840D - 2 Toolrevolver (li/re) Size 16 - 2 spindle units (X1, C1, Z1 / X2, C2, Z2) - Internal grinding spindle (45000 U/min) 18kW - Dressing Spindle Dr.Kaiser C72F - 1500-16000 U/min, 0,5kW - Marposs Workpiece- & Tool Control E9066N - Dittel AE 6000 - GMN High Frequency Spindle HVX 12 2 identic units available
            workpiece length 150 mm
            slide travel X-axis 1060 mm
            z-travel 280 mm
            swing diameter 320 mm
            control Siemens Sinumerik 840D
            rapid speed 0 - 30 m/min
            work piece spindle speed 0 - 6000 U/min
            workpiece spindle - bore 45 mm
            diameter 220 mm
            c-axis zur Positionierung
            total power requirement 65 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. - m
            Description :
            The CNC 235 vertical hard machining center with vertical
            workpiece spindle allows the use as single-purpose machine for
            - Internal grinding
            - External grinding
            - Hard Turning
            Furthermore, these processes can be combined with each other and
            be supplemented by other technologies.

            equipped with:
            - CNC Control Siemens 840D
            - 2 Toolrevolver (li/re) Size 16
            - 2 spindle units (X1, C1, Z1 / X2, C2, Z2)
            - Internal grinding spindle (45000 U/min) 18kW
            - Dressing Spindle Dr.Kaiser C72F - 1500-16000 U/min, 0,5kW
            - Marposs Workpiece- & Tool Control E9066N
            - Dittel AE 6000
            - GMN High Frequency Spindle HVX 12

            2 identic units available
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe FRORIEP SS 60 x 13000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15807 · Heavy Duty Lathe

          FRORIEP - SS 60 x 13000 - - ca. 1975 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2200 mm︱turning length 13000 / 6500 mm︱centre distance 13000 mm︱faceplate yes mm︱workpiece weight 100 t︱steady 8 ︱Rest 2 ︱spindle bore 95 mm︱internal taper diameter 120 mm︱tailstock quill taper metric 120mm 60° ︱tailstock quill diameter 280 mm︱quill travel 450 mm︱total power requirement - kW︱weight of the machine ca. - t︱
          Heavy Duty Lathe with 4-guides bed: - 2 Slides for different Turning Diameter: -- Diameter 4000mm with 6500mm turning Length -- Diameter 2200mm with 13000mm turning length - 8 Steadies
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2200 mm
            turning length 13000 / 6500 mm
            centre distance 13000 mm
            faceplate yes mm
            workpiece weight 100 t
            steady 8
            Rest 2
            spindle bore 95 mm
            internal taper diameter 120 mm
            tailstock quill taper metric 120mm 60°
            tailstock quill diameter 280 mm
            quill travel 450 mm
            total power requirement - kW
            weight of the machine ca. - t
            Description :
            Heavy Duty Lathe with 4-guides bed:
            - 2 Slides for different Turning Diameter:
            -- Diameter 4000mm with 6500mm turning Length
            -- Diameter 2200mm with 13000mm turning length
            - 8 Steadies
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe 1MAI PLOIESTI 1600 x 10000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18085 · Heavy Duty Lathe

          1MAI PLOIESTI - 1600 x 10000 - - 2020 - FANUC 0i TF

          Technical details
          turning diameter over bed 1600 mm︱turning diameter over slide rest 1200 mm︱turning length 10000 mm︱control FANUC 0i TF ︱workpiece weight 40000 kg︱steady 4 ︱feed 1 - 3000 mm/min︱main drive 60 kW︱main spindle speeds: 1,5 - 250 U/min︱total power requirement 110 kW︱weight of the machine ca. 120 t︱dimensions of the machine ca. 22x6,2x2,9 m︱
          the machine is currently being overhauled and equipped with: - new electrics (Siemens, Schneider, Schrak) and CNC control - new Fanuc motors - new hydraulic parts - complete mechanical overhaul - Ball screw (B axis) - Overhauled bed equipped with: - three-guideway bed - CNC control FANUC 0i TF - new milling and grinding equipment - Face plate with 4 jaws - Grinding device, Revolution range 1500 U/min -- Total vertical travel - 1050 mm - Milling device 14/10 kW - 1500/750 U/min
            turning diameter over bed 1600 mm
            turning diameter over slide rest 1200 mm
            turning length 10000 mm
            control FANUC 0i TF
            workpiece weight 40000 kg
            steady 4
            feed 1 - 3000 mm/min
            main drive 60 kW
            main spindle speeds: 1,5 - 250 U/min
            total power requirement 110 kW
            weight of the machine ca. 120 t
            dimensions of the machine ca. 22x6,2x2,9 m
            Description :
            the machine is currently being overhauled and equipped with:
            - new electrics (Siemens, Schneider, Schrak) and CNC control
            - new Fanuc motors
            - new hydraulic parts
            - complete mechanical overhaul
            - Ball screw (B axis)
            - Overhauled bed

            equipped with:
            - three-guideway bed
            - CNC control FANUC 0i TF
            - new milling and grinding equipment
            - Face plate with 4 jaws
            - Grinding device, Revolution range 1500 U/min
            -- Total vertical travel - 1050 mm
            - Milling device 14/10 kW - 1500/750 U/min

          Datasheet
          Request / Contact
          used  Heavy Duty Lathe POREBA TCF 224-3/2 x 12000


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17828 · Heavy Duty Lathe

          POREBA - TCF 224-3/2 x 12000 - - 2020 -

          Technical details
          turning diameter over bed 2240 mm︱turning diameter over slide rest 1800 mm︱turning length 12000 mm︱centre height 1120 mm︱max. workpiece weight between centres 30 t︱workpiece weight in steadies max. 40 t︱spindle turning speed range 0,8 - 400 U/min︱bed width 1600 mm︱cross slide - travel 600 + 250 mm︱faceplate 1800 mm︱main drive motor 100 kW︱spindle bore 105 mm︱spindle diameter in front bearing 320 mm︱tail stock ︱diameter 280 mm︱tailstock adjustment 200 mm︱total power requirement ca. 120 kVA︱weight of the machine ca. 52 t︱dimensions of the machine ca. L: 16,9 m︱
          Heavy Duty lathe with three bedway overhauled and equipped with: - CNC system Siemens Sinumerik 840Dsl - drives, electric from Siemens - 4 pcs. steady rest (dia. 100-400, 250-600,400-800 & 700-1100mm) - tool system: 8-pos. turret head SAUTER 05.480.540 80mm VDI (no toolholder) - X axis ball screw - Z axis rack system - Tail Stock Overhauling: - regrinding of the beds and the carriage plates, - new all bearings,new ball screws, - new full electrical equipment,new electrical cabinet from Rittal, - new air condition from Rittal for electrical cabinet, - new wires and spiral covers, - geometry acc. ISO 1708 - new painting, - 1 set of leveling wedges. C-Axis can be added against extra charge and also 8-fold Tool Turred Head with live tools (instead of Sauter Head) Material Warranty 12 months
            turning diameter over bed 2240 mm
            turning diameter over slide rest 1800 mm
            turning length 12000 mm
            centre height 1120 mm
            max. workpiece weight between ce. 30 t
            workpiece weight in steadies max. 40 t
            spindle turning speed range 0,8 - 400 U/min
            bed width 1600 mm
            cross slide - travel 600 + 250 mm
            faceplate 1800 mm
            main drive motor 100 kW
            spindle bore 105 mm
            spindle diameter in front bearin. 320 mm
            diameter 280 mm
            tailstock adjustment 200 mm
            total power requirement ca. 120 kVA
            weight of the machine ca. 52 t
            dimensions of the machine ca. L: 16,9 m
            Description :
            Heavy Duty lathe with three bedway overhauled and equipped with:
            - CNC system Siemens Sinumerik 840Dsl
            - drives, electric from Siemens
            - 4 pcs. steady rest (dia. 100-400, 250-600,400-800 & 700-1100mm)
            - tool system: 8-pos. turret head SAUTER 05.480.540 80mm VDI (no toolholder)
            - X axis ball screw
            - Z axis rack system
            - Tail Stock
            Overhauling:
            - regrinding of the beds and the carriage plates,
            - new all bearings,new ball screws,
            - new full electrical equipment,new electrical cabinet from Rittal,
            - new air condition from Rittal for electrical cabinet,
            - new wires and spiral covers,
            - geometry acc. ISO 1708
            - new painting,
            - 1 set of leveling wedges.


            C-Axis can be added against extra charge and also 8-fold Tool Turred Head with
            live tools (instead of Sauter Head)

            Material Warranty 12 months

          Datasheet
          Request / Contact
          used  Heavy Duty Lathe SOMAB Maximab S 1800


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18234 · Heavy Duty Lathe

          SOMAB - Maximab S 1800 - - 2015 - FAGOR 8085

          Technical details
          turning diameter over bed 1800 mm︱turning diameter over slide rest 1400 mm︱turning length 6000 mm︱centre distance 6000 mm︱max. workpiece weight between centres 10000 kg︱main drive motor 37/56 kW︱spindle turning speed range 250 U/min︱spindle bore 130 mm︱control FAGOR 8085 ︱faceplate diameter 1400 mm︱tailstock quill diameter 200 mm︱tailstock quill stroke 300 mm︱tailstock quill taper ISO MK 6 ︱x-travel 850 mm︱total power requirement - kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. 12,5 x 3 x 2,8 m︱
          Precision lathe with horizontal bed andhHardened cast iron rectified slides. The axes are controlled by brushless motor and high precision screw balls (rackon Z axis for 6m stroke). Tool position (axis X and Z) is measured by precision scales. Asynchronous digital motor spindle control. 4-speed gearbox allows full power even at low speeds. - CNC Control FAGOR 8085 - 3 Steadies - tool holder - bar carrier - 1 anti-vibration bar Ø 150 mm and 1 of Ø 70 mm - Manual tailstock with motorized motion
            turning diameter over bed 1800 mm
            turning diameter over slide rest 1400 mm
            turning length 6000 mm
            centre distance 6000 mm
            max. workpiece weight between ce. 10000 kg
            main drive motor 37/56 kW
            spindle turning speed range 250 U/min
            spindle bore 130 mm
            control FAGOR 8085
            faceplate diameter 1400 mm
            tailstock quill diameter 200 mm
            tailstock quill stroke 300 mm
            tailstock quill taper ISO MK 6
            x-travel 850 mm
            total power requirement - kW
            weight of the machine ca. 32 t
            dimensions of the machine ca. 12,5 x 3 x 2,8 m
            Description :
            Precision lathe with horizontal bed andhHardened cast iron rectified slides.
            The axes are controlled by brushless motor and high precision screw balls
            (rackon Z axis for 6m stroke). Tool position (axis X and Z) is measured by
            precision scales. Asynchronous digital motor spindle control.
            4-speed gearbox allows full power even at low speeds.

            - CNC Control FAGOR 8085
            - 3 Steadies
            - tool holder
            - bar carrier
            - 1 anti-vibration bar Ø 150 mm and 1 of Ø 70 mm
            - Manual tailstock with motorized motion
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Профіль торговця: Kemmerich Werkzeugmaschinen GmbH

          Зв'язатися з трейдером



            Kemmerich Machine Tools GmbH
           Im Rottfeld 1a
            40789 Monheim am Rhein
            Deutschland
            + 49 2173 207474 "> + 49 2173 207474
            + 995 5913 00000
            info@kemmerich.biz
            www.kemmerich.biz

          Профіль Трейдера

          Г-н Фолькер КеммерічАндреас Кеммеріч
          Телефон: 02173 / 207472Телефон: 02173 / 207474
          Факс: 02173 / 207473Факс: 02173 / 207473
          E-Mail: sales@kemmerich.bizE-Mail: info@kemmerich.biz




          Kemmerich Werkzeugmaschinen GmbH   40789 Monheim am Rhein Im Rottfeld 1a Deutschland
          Kemmerich Werkzeugmaschinen GmbH

          Im Rottfeld 1a



          Contact Trader


            Kemmerich Werkzeugmaschinen GmbH
           Im Rottfeld 1a
            40789 Monheim am Rhein
            Deutschland
            +49 2173 207474
            +49 2173 207473
            info@kemmerich.biz
            www.kemmerich.biz
            Contact person:
          Herrn Andreas Kemmerich +49 2173 207474

            Seit 1983 ist die Firma Kemmerich Werkzeugmaschinen GmbH auf dem sich ständig ändernden Werkzeugmaschinen-Markt aktiv und handelt als international tätiges Maschinen-Handelsunternehmen mit gebrauchten Maschinen für die spanabhebende und spanlose Verarbeitung der metallverarbeitenden Industrie
          Kemmerich ist dabei auf Zahnradbearbeitungsmaschinen und Maschinen der Schwerzerspanung, wie zum Beispiel Dreh-, Fräs- und Schleifmaschinen sowie Bohrwerke, spezialisiert. Die Maschinen kommen unter anderem in der Automobilindustrie (Ausrüster und Zulieferer), im Zahnrad- und Getriebebau, der Produktion von Kugel- oder Wälzlagern, dem allgemeinen Maschinenbau zum Einsatz.

          Ansässig ist das Unternehmen inzwischen in Monheim am Rhein, im Herzen des Rheinlandes und in unmittelbarer Nähe zu den Messestädten Köln und Düsseldorf und deren Flughäfen. Dort stehen auf einer 2.200 qm großen, beheizbaren Ausstellungsfläche eine Vielzahl von konventionellen wie auch CNC/SPS-gesteuerten Metall be- und verarbeitenden Werkzeugmaschinen stets zur Besichtigung und Vorführung bereit.

          Mit einer Krankapazität von 32 Tonnen können jegliche Art von Maschinen gehändelt und bewegt werden. In der eigenen Werkstatt werden die Funktionsfähigkeit der Maschinen überprüft und gegebenenfalls festgestellte Mängel beseitigt. Zudem werden Maschinen auf Kundenwunsch modernisiert und modifiziert. Das Leistungsspektrum des Unternehmens umfasst zudem die Demontage oder Demontageüberwachung, Verladung, Verpackung sowie Land-, Seetransport und Zollabwicklungen, Montage und Inbetriebnahme beim Kunden durch Vermittlung von Spezialisten, Präsentation der Maschinen unter Strom (soweit möglich), Durchführung von Maschinenbewertungen und die Vermittlung von Kontakten.

          Anstatt in neue, teure Werkzeugmaschinen zu investieren und um lange Lieferzeiten zu umgehen, lohnt es sich oftmals, eine gut gepflegte Gebrauchtmaschine zu kaufen.




          Machine category


          · Abkantpresse - hydraulisch · Abrichtschleifmaschine · Abwälzfräs- und Stoßmaschine -kombiniert · Auswuchtmaschine · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechbiegemaschine - 3 Walzen · Blechkaltrichtmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelrundtischflachschleifm. - vertikal · Doppelscheibenschleifmaschine · Doppelscheibenschleifmaschine - vertik. · Doppelständer - Karusselldrehmaschine · Doppelständer - Langfräsmaschine · Doppelständerpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Druckgußmaschine · Einständerpresse - Hydraulisch · Elektronik / SPS-Steuerungen · Entzunderung · Exzenterpresse - Einständer · Fahrständerfräsmaschine · Filteranlage · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Futter · Führungsbahnenschleifmaschine · Gesenkschmiedepresse · Gewinde-Schnecken-Fräsmaschine · Gewinde-Schnecken-Schleifmaschine · Gewinderollmaschine · Gewindeschälmaschine · Gewindewalzmaschine · Gießerei · Glattwalzmaschine · Hartdreh- & Schleifzentrum · Hobel-, Fräs- und Schleifmaschine · Hohlspindeldrehmaschine · Hon- und Ausbohrmaschine · Honmaschine - Innen - Horizontal · Honmaschine - Innen - Vertikal · Hydraulische Presse · Induktionsanlage · Innen- und Planschleifmaschine · Innenschleifeinrichtung · Innenschleifmaschine · Kaltwalzmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kegelradfräsmaschine-Bogenverzahnung · Kegelradfräsmaschine-Geradverzahnung · Kegelradhobelmaschine · Keilnutenziehmaschine · Kniehebelpresse - Doppelständer · Kombinierte Ziehmaschinen · Koordinatenmeßmaschine · Kopfdrehmaschine · Kurbelwellenfräsmaschine · Kurbelwellenschleifmaschine · Lackieranlage · Langdrehautomat · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Längs- und Querteilanlage · Manipulator · Messerschleifmaschine · Messerschleifmaschine - Horizontal · Nutenfräsmaschine - Horizontal · Nutenziehmaschine · Pfeilradhobelmaschine · Plan- und Spitzendrehbank · Plandrehmaschine · Planscheibe · Planschleifmaschine · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Profilbearbeitungszentrum · Radialbohrmaschine · Radsatzdrehmaschine · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Spitzenlos · Rundschleifmaschine - Universal · Rundschmiedemaschine · Räummaschine - Innen - Vertikal · Schmiedepresse · Schweißanlage · Schwerdrehbank · Schwerdrehmaschine · Spindelpresse · Spiralkegelradschneidmaschine · Spitzen- und Plandrehbank · Späneförderer · Stanzautomat-Doppelständer · Stanzpresse - Doppelständer · Stähleschleifmaschine · Tieflochbohrbank · Tieflochbohrmaschine · Tiefziehpresse - Hydraulik · Tischbohrwerk · Transferpresse · Vertikal - Rundtischflachschleifmaschine · Vertikaldrehmaschine · Verzahnungsmeßmaschine · Walzendrehmaschine · Walzenschleifmaschine · Walzwerk - Reversier · Wasserstrahlschneidanlage · Werkzeugschleifmaschine - Universal · Wälzfräser - Hinterschleifmaschine · Wälzfräserschärfmaschine · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhobelmaschine · Zahnradhonmaschine · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zweiständer - Karusselldrehmaschine ·