Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Knops Werkzeugmaschinen GmbH & Co. KG - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WOHLENBERG V 1000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08501 · Center Lathe

          WOHLENBERG - V 1000 - - 1991 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 3000 mm︱spindle turning speed range 4,5 - 900 U/min︱spindle bore 104 mm︱total power requirement 30 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. m︱
          - 3-axis D.R.O. - Feed in the upper slide - Multifix quick change tool holder size D with 2 holders - coolant device - steady-rest The lathe chuck (face plate) shown has been replaced by an older one.
            turning diameter over bed 1000 mm
            turning diameter over slide rest 760 mm
            turning length 3000 mm
            spindle turning speed range 4,5 - 900 U/min
            spindle bore 104 mm
            total power requirement 30 kW
            weight of the machine ca. 10,5 t
            Description :
            - 3-axis D.R.O.
            - Feed in the upper slide
            - Multifix quick change tool holder size D with 2 holders
            - coolant device
            - steady-rest

            The lathe chuck (face plate) shown has been replaced by an older one.
          Datasheet
          Request / Contact
          used  Center Lathe GRAZIANO SAG 210 x 1500


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2209 · Center Lathe

          GRAZIANO - SAG 210 x 1500 - - 1980 -

          Technical details
          turning diameter over bed - mm︱turning diameter over slide rest 268 mm︱centre distance 1500 mm︱center height over bed 210 mm︱Swing in gap 580 mm︱bed width 320 mm︱spindle bore 57 mm︱spindle turning speed range (24) 38 - 2000 U/min︱feeds - longitudinal 0,020 - 0,44 mm/U︱feeds cross 0,010 - 0,22 mm/U︱tailstock quill diameter 68 mm︱tailstock quill stroke 200 mm︱tailstock quill taper MT 5 ︱main drive 7,5 kW︱Dimensions (LxWxH) 3,3 x 1,5 x 1,7 m︱weight of the machine ca. 2,3 t︱
          * 2-axes D.R.O. make Heidenhain * Multifix toolholder * 3-jaw-chuck Forkardt F250
            turning diameter over bed - mm
            turning diameter over slide rest 268 mm
            centre distance 1500 mm
            center height over bed 210 mm
            Swing in gap 580 mm
            bed width 320 mm
            spindle bore 57 mm
            spindle turning speed range (24) 38 - 2000 U/min
            feeds - longitudinal 0,020 - 0,44 mm/U
            feeds cross 0,010 - 0,22 mm/U
            tailstock quill diameter 68 mm
            tailstock quill stroke 200 mm
            tailstock quill taper MT 5
            main drive 7,5 kW
            Dimensions (LxWxH) 3,3 x 1,5 x 1,7 m
            weight of the machine ca. 2,3 t
            Description :
            * 2-axes D.R.O. make Heidenhain
            * Multifix toolholder
            * 3-jaw-chuck Forkardt F250

          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center NILES-SIMMONS N 50 MC / 6000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08714 · CNC Turning- and Milling Center

          NILES-SIMMONS - N 50 MC / 6000 - - 2009 - Siemens 840D Power Line

          Technical details
          turning diameter 1300 mm︱turning length 6000 mm︱control Siemens 840D Power Line ︱total power requirement kW︱weight of the machine ca. 82 t︱dimensions of the machine ca. 17,6 x 3,7 x 3,9 m︱
          5-axis CNC inclined bed turning and milling center The machine is PRACTICAL NEW! - Test run only! Main spindle hours: 1047 Main spindle C axis: 228 Advance items active: 968 Milling spindle active: 460 (New price in 2009 - Euro 1,700,000.00) Siemens 840D CNC Control. Swing diameter over the bed 1300 mm. Swing diameter over the saddle 1250 mm. Turning length 6000 mm. Spindle bore 225 mm. Chuck diameter 630 mm. Spindle drive motor rating 78/87 KW. Spindle speeds 10 - 1244 rpm in 2 gear steps. C-Axis 0.001 deg. Single tool carrier for Turning/Milling. 96 station tool magazine/tool changer. Tool taper HSK-A100. Milling spindle drive motor rating 38/48.3 KW. Milling spindle speeds to 3500 rpm. Y-Axis (off centre milling/drilling) -400/+395 mm. B-Axis tool swivelling axis range -105/+95 deg.. 3 x NC-steady slides with steady rests. NC-Tailstock. Tool monitoring. Coolant pump 80 bar. Process near measuring of the workpiece in the working area. Huge amount ( EUR 176,695.) of toolings unused, included
            turning diameter 1300 mm
            turning length 6000 mm
            control Siemens 840D Power Line
            weight of the machine ca. 82 t
            dimensions of the machine ca. 17,6 x 3,7 x 3,9 m
            Description :
            5-axis CNC inclined bed turning and milling center
            The machine is PRACTICAL NEW! - Test run only!

            Main spindle hours: 1047
            Main spindle C axis: 228
            Advance items active: 968
            Milling spindle active: 460

            (New price in 2009 - Euro 1,700,000.00)




            Siemens 840D CNC Control.
            Swing diameter over the bed 1300 mm.
            Swing diameter over the saddle 1250 mm.
            Turning length 6000 mm.
            Spindle bore 225 mm.
            Chuck diameter 630 mm.
            Spindle drive motor rating 78/87 KW.
            Spindle speeds 10 - 1244 rpm in 2 gear steps.
            C-Axis 0.001 deg.
            Single tool carrier for Turning/Milling.
            96 station tool magazine/tool changer.
            Tool taper HSK-A100.
            Milling spindle drive motor rating 38/48.3 KW.
            Milling spindle speeds to 3500 rpm.
            Y-Axis (off centre milling/drilling) -400/+395 mm.
            B-Axis tool swivelling axis range -105/+95 deg..
            3 x NC-steady slides with steady rests.
            NC-Tailstock.
            Tool monitoring.
            Coolant pump 80 bar.
            Process near measuring of the workpiece in the working area.
            Huge amount ( EUR 176,695.) of toolings unused, included
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center EMCO EMCOTURN 900


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08525 · CNC Turning- and Milling Center

          EMCO - EMCOTURN 900 - - 2006 - Siemens 840 D

          Technical details
          turning diameter 1000 mm︱turning length 2000 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Siemens 840 D Driven tools C-axis Tailstock Hydraulic jaw chuck Chip conveyor Coolant device Machine is sold without tools / holders
            turning diameter 1000 mm
            turning length 2000 mm
            control Siemens 840 D
            Description :
            CNC control Siemens 840 D
            Driven tools
            C-axis
            Tailstock
            Hydraulic jaw chuck
            Chip conveyor
            Coolant device

            Machine is sold without tools / holders
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G 250 RATIO LINE 1400 mm


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08791 · CNC Turning- and Milling Center

          INDEX - G 250 RATIO LINE 1400 mm - - 2005 - Siemens C 200-4 D 840 D

          Technical details
          turning diameter 250 mm︱turning length 1400 mm︱control Siemens C 200-4 D 840 D︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 4.520 x 2.440 x 2.400 m︱
            turning diameter 250 mm
            turning length 1400 mm
            control Siemens C 200-4 D 840 D
            dimensions of the machine ca. 4.520 x 2.440 x 2.400 m
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center DMG GILDEMEISTER CTX 310


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08840 · CNC Turning- and Milling Center

          DMG GILDEMEISTER - CTX 310 - - 2002 - Heidenhain Pilot

          Technical details
          turning diameter 320 mm︱turning length 450 mm︱control Heidenhain Pilot ︱total power requirement 21 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,1 x 1,6 x 1,73 m︱
          On hours: 29904 Spindle hours: 15984 CNC control: Heidenhain Pilot With C-axis and driven tools Turning diameter: 320 mm Turning length: 450mm Swing over bed: 330 mm Swing over slide: 260 mm Travel - x: 160 mm Travel - z: 450 mm Speed range - main spindle: 5,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 76 / 112 Nm Turret (x-fold): 12 pos Tool holder: VDI 30 Total power requirement: 21 kVA Machine weight approx.: 3.2 t Space requirement approx.: 3.1 x 1.6 x 1.73 m Accessories: chip conveyor Hydraulic chuck Loading magazine Breuning Tailstock, controlled parts pickup device Tool measurement Toolsetter Various accessories, tool holders Documentation
            turning diameter 320 mm
            turning length 450 mm
            control Heidenhain Pilot
            total power requirement 21 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,1 x 1,6 x 1,73 m
            Description :
            On hours: 29904
            Spindle hours: 15984

            CNC control: Heidenhain Pilot
            With C-axis and driven tools
            Turning diameter: 320 mm
            Turning length: 450mm
            Swing over bed: 330 mm
            Swing over slide: 260 mm
            Travel - x: 160 mm
            Travel - z: 450 mm
            Speed range - main spindle: 5,000 rpm
            Drive power - main spindle: 11 / 7.5 kW
            Max. torque: 76 / 112 Nm
            Turret (x-fold): 12 pos
            Tool holder: VDI 30

            Total power requirement: 21 kVA
            Machine weight approx.: 3.2 t
            Space requirement approx.: 3.1 x 1.6 x 1.73 m

            Accessories:
            chip conveyor
            Hydraulic chuck
            Loading magazine Breuning
            Tailstock, controlled
            parts pickup device
            Tool measurement Toolsetter
            Various accessories, tool holders
            Documentation
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center TRAUB TNK 36


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05810 · CNC Turning- and Milling Center

          TRAUB - TNK 36 - - 2002 - TRAUB TX8i

          Technical details
          turning diameter 36 mm︱turning length 100 mm︱control TRAUB TX8i ︱bar capacity 36 mm︱spindle turning speed range max. 6300 U/min︱main drive motor 10,7 kW︱Subspindle motor 10,7 kW︱total power requirement 33 kW︱weight of the machine ca. t︱
          * Main- and subspindle with C-axis 0,001 deg. * Bar loader FMB turbo 5-42 XT * Tool carrier I (X/Y/Z): - 12-station turret, life tools 6000 rpm, 5,5 kW - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm * Tool carrier II (X/Z): - 5-station front working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 370 mm, Z-axis 250 mm * Tool carrier III (X/Y): - 5-station back working attachment, life tools 6000 rpm, 5,5 kW - Travels: X-axis 73 mm, Y-axis +/-50 mm Information about the chucks: Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW Collets: SK6970ZW or SK6970ZW
            turning diameter 36 mm
            turning length 100 mm
            control TRAUB TX8i
            bar capacity 36 mm
            spindle turning speed range max. 6300 U/min
            main drive motor 10,7 kW
            Subspindle motor 10,7 kW
            total power requirement 33 kW
            Description :
            * Main- and subspindle with C-axis 0,001 deg.
            * Bar loader FMB turbo 5-42 XT
            * Tool carrier I (X/Y/Z):
            - 12-station turret, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 50 mm, Y-axis +/- 40mm, Z-axis 100 mm
            * Tool carrier II (X/Z):
            - 5-station front working attachment, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 370 mm, Z-axis 250 mm
            * Tool carrier III (X/Y):
            - 5-station back working attachment, life tools 6000 rpm, 5,5 kW
            - Travels: X-axis 73 mm, Y-axis +/-50 mm

            Information about the chucks:
            Main spindle: Chuck clamping top pull-back Gr32 SK6970ZW
            Counter spindle: Chuck clamping top Axfix Gr32 f SK6970ZW
            Collets: SK6970ZW or SK6970ZW

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK Integrex 200 SY + GL100C


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08710 · CNC Turning- and Milling Center

          MAZAK - Integrex 200 SY + GL100C - - 2001 - MAZATROL 640 MT

          Technical details
          turning diameter 540 mm︱turning length ca. 1065 mm︱control MAZATROL 640 MT ︱total power requirement kW︱weight of the machine ca. 8,4 t︱dimensions of the machine ca. m︱
          MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle, max. speed 5.000 rpm Main spindle full C-axis Sub spindle, max. speed 6.000 rpm Y-axis +/- 80 mm Milling spindle, max. speed 6.000 rpm Full B-axis, 225° ATC 40 tools KM-63 toolholders Tooleye 1 x 3-Backenfutter, Diameter 210 mm 1 x 3-Backenfutter, Diameter 170 mm Portallader Flex GL-100C High pressure coolant, 20 bar Swarf conveyor
            turning diameter 540 mm
            turning length ca. 1065 mm
            control MAZATROL 640 MT
            weight of the machine ca. 8,4 t
            Description :
            MAZATROL 640 MT control
            max. turning diameter 540 mm
            Z-axis movements 1.065 mm
            Main spindle, max. speed 5.000 rpm
            Main spindle full C-axis
            Sub spindle, max. speed 6.000 rpm
            Y-axis +/- 80 mm
            Milling spindle, max. speed 6.000 rpm
            Full B-axis, 225°
            ATC 40 tools
            KM-63 toolholders
            Tooleye
            1 x 3-Backenfutter, Diameter 210 mm
            1 x 3-Backenfutter, Diameter 170 mm
            Portallader Flex GL-100C
            High pressure coolant, 20 bar
            Swarf conveyor
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 600 E / 2000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2220 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 600 E / 2000 - - 2000 - HEIDENHAIN PILOT 3190

          Technical details
          turning diameter 680 mm︱turning length 2000 mm︱control HEIDENHAIN PILOT 3190 ︱total power requirement kW︱weight of the machine ca. 8,7 t︱dimensions of the machine ca. 5560 x 2400 x 2130 mm︱
          CNC control: HEIDENHAIN PILOT 3190 Workspace: Distance between centers: 2000 mm Swing over guide cover: 680 mm Swing over cross slide: 455 mm Cross travel: 320 mm Longitudinal travel: 2000 mm Tool turret: Number of places: 12 pieces Recording: VDI 50 DIN 698800 Powered (driven) tools: yes Headstock: Spindle head Ø: 220h5 mm flat flange Front bearing diameter: 140 mm Spindle bore: 107mm Max chuck diameter: 315/400 mm Drive power, 100% ED: 30 kW Max. torque: 650/2,000 Nm Spindle speed range: 4 - 2800 rpm feeds: Cross slide: 5000 mm/min Longitudinal slide: 5000 mm/min Rapid traverse X axis: 24 m/min Rapid traverse Z axis: 30 m/min Max. feed force X axis: 8 kN Max. feed force Z axis: 15 kN Tailstock: Quill diameter: 120 mm Quill stroke: 120 mm Taper mount: MT 5 Dimensions (LxWxH): approx. 5560 mm x 2400 mm x 2130 mm Machine weight: approx. 8700 kg Equipped with: Hydraulic steady rest make SMW type SLU-4 clamping range 35 - 228 mm Hydraulic three-jaw chuck make FORKHARDT Type 3QLC-K 315mm C axis Hydraulic tailstock 12-station turret hollow clamping cylinder chip conveyor 3 power tools Approx. 70 pieces of VDI 50 tool holders Turning tools and a wide range of inserts Various jaw sets Maintenance kit case Operating instructions / documentation Machine parameters on storage medium
            turning diameter 680 mm
            turning length 2000 mm
            control HEIDENHAIN PILOT 3190
            weight of the machine ca. 8,7 t
            dimensions of the machine ca. 5560 x 2400 x 2130 mm
            Description :
            CNC control: HEIDENHAIN PILOT 3190

            Workspace:
            Distance between centers: 2000 mm
            Swing over guide cover: 680 mm
            Swing over cross slide: 455 mm
            Cross travel: 320 mm
            Longitudinal travel: 2000 mm

            Tool turret:
            Number of places: 12 pieces
            Recording: VDI 50 DIN 698800
            Powered (driven) tools: yes

            Headstock:
            Spindle head Ø: 220h5 mm flat flange
            Front bearing diameter: 140 mm
            Spindle bore: 107mm
            Max chuck diameter: 315/400 mm
            Drive power, 100% ED: 30 kW
            Max. torque: 650/2,000 Nm
            Spindle speed range: 4 - 2800 rpm

            feeds:
            Cross slide: 5000 mm/min
            Longitudinal slide: 5000 mm/min
            Rapid traverse X axis: 24 m/min
            Rapid traverse Z axis: 30 m/min

            Max. feed force X axis: 8 kN
            Max. feed force Z axis: 15 kN

            Tailstock:
            Quill diameter: 120 mm
            Quill stroke: 120 mm
            Taper mount: MT 5

            Dimensions (LxWxH): approx. 5560 mm x 2400 mm x 2130 mm
            Machine weight: approx. 8700 kg

            Equipped with:
            Hydraulic steady rest make SMW type SLU-4 clamping range 35 - 228 mm
            Hydraulic three-jaw chuck make FORKHARDT
            Type 3QLC-K 315mm
            C axis
            Hydraulic tailstock
            12-station turret
            hollow clamping cylinder
            chip conveyor
            3 power tools
            Approx. 70 pieces of VDI 50 tool holders
            Turning tools and a wide range of inserts
            Various jaw sets
            Maintenance kit case
            Operating instructions / documentation
            Machine parameters on storage medium
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used  Facing and Centering Lathe WMW ZERBST DP 4000 ... DP 5000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05430 · Facing and Centering Lathe

          WMW ZERBST - DP 4000 ... DP 5000 - - retrofit 2014 -

          Technical details
          turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 22000 mm︱total power requirement 36 kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. m︱
          Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg.
            turning diameter over bed 5000 mm
            turning diameter over slide rest 4000 mm
            turning length 22000 mm
            total power requirement 36 kW
            weight of the machine ca. 53,5 t
            Description :
            Facing and Centering Lathe with plate field

            - Max. Turning diameter over the bed slide 4000 mm
            - Max. Turning diameter 5000 mm
            - Max. Turning length: 22000 mm
            - Face plate speed range 0.9 - 56 rpm
            - Faceplate diameter 4420 mm
            - Max. Workpiece weight between the centers: 20 t
            - Max. workpiece weight -without tailstock: 12,5 t

            - Two bed slides with 4500 mm turning length
            - With plate fields
            - A roller block
            - With tailstock

            Machine was overhauled in Italy in 2014 with stepless speed control.
            After the overhaul, the lathe was no longer operational.

            Machine is dismantled and stored near Hamburg.
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe CRAVEN 80,5


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H05287 · Heavy Duty Lathe

          CRAVEN - 80,5 - - ca.1960 -

          Technical details
          turning diameter over bed 4100 mm︱turning diameter over slide rest 3505 mm︱turning length 12000 mm︱centre height 2045 mm︱centre distance 12192 mm︱bed width 4270 mm︱max. workpiece weight between centres 70000 kg︱main drive 81 kW︱faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min︱total power requirement kW︱weight of the machine ca. 205 t︱dimensions of the machine ca. m︱
          4 SLIDES BED LATHE CENTRES HEIGHT 2.045 MM. CENTRES DISTANCE 12.192 MM. MAX. DIAMETER OVER BED 4.100 MM. MAX. DIAMETER OVER SADDLE 3.505 MM. BED WIDTH 4.270 MM. MAX. WEIGHT BETWEEN CENTRES 70 TONS. MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS. SPINDLE MOTOR POWER 81 KW. SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM. SPINDLE HOLE 180 MM. TOTAL WEIGHT 205 COMPLETE WITH: - 4 JAWS FACEPLATE 3.660 MM. - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM. - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS - UPPER SADDLE FOR THREADING - CRANK SHAFTS TURNING DEVICE
            turning diameter over bed 4100 mm
            turning diameter over slide rest 3505 mm
            turning length 12000 mm
            centre height 2045 mm
            centre distance 12192 mm
            bed width 4270 mm
            max. workpiece weight between ce. 70000 kg
            main drive 81 kW
            faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min
            weight of the machine ca. 205 t
            Description :
            4 SLIDES BED LATHE

            CENTRES HEIGHT 2.045 MM.

            CENTRES DISTANCE 12.192 MM.

            MAX. DIAMETER OVER BED 4.100 MM.

            MAX. DIAMETER OVER SADDLE 3.505 MM.

            BED WIDTH 4.270 MM.

            MAX. WEIGHT BETWEEN CENTRES 70 TONS.

            MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS.

            SPINDLE MOTOR POWER 81 KW.

            SPINDLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM.

            SPINDLE HOLE 180 MM.

            TOTAL WEIGHT 205


            COMPLETE WITH:
            - 4 JAWS FACEPLATE 3.660 MM.
            - N. 2 CLOSED STEADIES, DIAMETER 305 - 1.016 MM.
            - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS
            - UPPER SADDLE FOR THREADING
            - CRANK SHAFTS TURNING DEVICE
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe FRORIEP 4000 x 13000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H07408 · Heavy Duty Lathe

          FRORIEP - 4000 x 13000 - - approx. 1970 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2220 mm︱turning length 13000 mm︱faceplate diameter 2540 mm︱max. workpiece weight between centres 100 ton︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heavy Duty Lathe with steady-rests in excellent condition. Nr. 4 guides Diameter face plate mm 2.540 Working diameter mm 4.000 x 6.500 Working diameter mm 2.220 x 13.000 Inspection under power possible.
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2220 mm
            turning length 13000 mm
            faceplate diameter 2540 mm
            max. workpiece weight between ce. 100 ton
            Description :
            Heavy Duty Lathe with steady-rests in excellent condition.

            Nr. 4 guides
            Diameter face plate mm 2.540
            Working diameter mm 4.000 x 6.500
            Working diameter mm 2.220 x 13.000


            Inspection under power possible.
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe QIQIHAR HT125x110/12


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08290 · Heavy Duty Lathe

          QIQIHAR - HT125x110/12 - - 2009 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱
          Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual
            turning diameter over bed 1250 mm
            turning diameter over slide rest 1000 mm
            turning length 11000 mm
            weight of the machine ca. 49 t
            Description :
            Center height 720 mm
            Center distance 11000 mm
            Turning diameter over bed 1250 mm
            Turning diameter over slide 1000 mm
            Workpiece weight max 12 to
            Speed 3-315 rpm - stepless
            Motor power 55 kW (DC)

            Equipment
            1 position indicator HEIDENHAIN | Type ND 780 for 1 axis
            1 four-jaw faceplate Ø 1000 mm
            1 fixed steady rest
            1 ring steady rest with four-jaw faceplate Ø 920 mm
            1 Autom. 4-pos. tool holder
            1 Chip conveyor
            1 Machine lamp
            1 Coolant device
            Operating key | operating manual
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled PBR T 35 SNC x 2000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05972 · Lathe - cycle-controlled

          PBR - T 35 SNC x 2000 - - 2007 - FAGOR

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control FAGOR ︱turning diameter over slide 425 mm︱spindle bore 100 mm︱dimensions 6,0 x 2,1 x 2,1 m︱total power requirement kW︱weight of the machine ca. t︱
          •Control von Fagor •Power 28 Kw •Turning diameter over bed 720 mm •Turning diameter over saddle 425 mm •Turning length 2.000 mm •Max speed 2.000 rpm. •Power chuck Ø400 •Steady-rest Ø20-200 mm •Max. workpiece weight between centers + steady-rest 4.000 KG •Max. workpiece weight between centers 3.000 KG •Max. workpiece weight in chuck 1.200 KG
            turning diameter 720 mm
            turning length 2000 mm
            control FAGOR
            turning diameter over slide 425 mm
            spindle bore 100 mm
            dimensions 6,0 x 2,1 x 2,1 m
            Description :
            •Control von Fagor
            •Power 28 Kw
            •Turning diameter over bed 720 mm
            •Turning diameter over saddle 425 mm
            •Turning length 2.000 mm
            •Max speed 2.000 rpm.
            •Power chuck Ø400
            •Steady-rest Ø20-200 mm
            •Max. workpiece weight between centers + steady-rest 4.000 KG
            •Max. workpiece weight between centers 3.000 KG
            •Max. workpiece weight in chuck 1.200 KG
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column Quqihar Heavy SMVTM 1600


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05553 · Vertical Turret Lathe - Single Column

          Quqihar Heavy - SMVTM 1600 - - 2011 - Siemens 840 D

          Technical details
          faceplate diameter 8000 mm︱swing diameter 16000 mm︱turning height 3000 mm︱Control Siemens 840 D ︱ram head - vertical travel 2500 mm︱workpiece weight 250 t︱faceplate speeds: 16 U/min︱ram head - vertical travel 2500 mm︱milling spindle turning speed range: 1000 U/min︱tool taper HSK 100 ︱main drive motor 132 kW︱total power requirement kW︱weight of the machine ca. 420 t︱dimensions of the machine ca. m︱
          - CNC-control SIEMENS 840 D - Boring and milling device - C-axis - Universal angular milling head
            faceplate diameter 8000 mm
            swing diameter 16000 mm
            turning height 3000 mm
            Control Siemens 840 D
            ram head - vertical travel 2500 mm
            workpiece weight 250 t
            faceplate speeds: 16 U/min
            ram head - vertical travel 2500 mm
            milling spindle turning speed ra. 1000 U/min
            tool taper HSK 100
            main drive motor 132 kW
            weight of the machine ca. 420 t
            Description :
            - CNC-control SIEMENS 840 D
            - Boring and milling device
            - C-axis
            - Universal angular milling head
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column TOS-HULIN SKIQ 16


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06016 · Vertical Turret Lathe - Single Column

          TOS-HULIN - SKIQ 16 - - 1989/2006 retrofit - Siemens 840 D

          Technical details
          faceplate diameter 1600 mm︱swing diameter 2000 mm︱turning height 1500 mm︱Control Siemens 840 D ︱total power requirement 80 kVA︱weight of the machine ca. 25,5 t︱dimensions of the machine ca. m︱
          General overhauling and modernized with CNC in the year 2006 Equipmemt: CNC control SIEMENS 840 D 15-pos tool changer Hydraulic 4-jaw faceplate Coolant system Coolant is fed through the ram and the tool holders to the tool cutting edge promoted. Hydraulically operated safety gates Chip conveyor Technical specifications: Faceplate diameter 1600 mm Faceplate speed range 2.5 - 315 rpm. Main engine 60 kW Largest workpiece diameter 2000 mm Size workpiece height 1500 mm Largest slider stroke 1000 mm Crossbar adjustment 800 mm Feeds 1 - 4000 mm/min. Rapid traverse 12000 mm/min. Total power consumption of the machine 80 kVA Required area 6720 x 5800 mm Machine height 5895 mm Machine weight 25.5 t
            faceplate diameter 1600 mm
            swing diameter 2000 mm
            turning height 1500 mm
            Control Siemens 840 D
            total power requirement 80 kVA
            weight of the machine ca. 25,5 t
            Description :
            General overhauling and modernized with CNC in the year 2006

            Equipmemt:
            CNC control SIEMENS 840 D
            15-pos tool changer
            Hydraulic 4-jaw faceplate
            Coolant system
            Coolant is fed through the ram and the tool holders to the
            tool cutting edge promoted.
            Hydraulically operated safety gates
            Chip conveyor

            Technical specifications:
            Faceplate diameter 1600 mm
            Faceplate speed range 2.5 - 315 rpm.
            Main engine 60 kW
            Largest workpiece diameter 2000 mm
            Size workpiece height 1500 mm
            Largest slider stroke 1000 mm
            Crossbar adjustment 800 mm
            Feeds 1 - 4000 mm/min.
            Rapid traverse 12000 mm/min.
            Total power consumption of the machine 80 kVA
            Required area 6720 x 5800 mm
            Machine height 5895 mm
            Machine weight 25.5 t
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DÖRRIES CTE 160


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05626 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 160 - - 1977/2007 - Heidenhain

          Technical details
          faceplate diameter 1600 mm︱swing diameter 1800 mm︱turning height 1500 mm︱Control Heidenhain ︱max. ram stroke 1200 mm︱faceplate turning speed range 0 - 200 U/min︱main drive motor 85 kW︱workpiece weight max. 8000 kg︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 8,4 x 4,5 x 5,3 m︱
          In 2007 geometrically overhauled and modernized (retrofit) * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles: - Right ram (axes X1 and Z1), faceplate (S) * D.R.O. make HEIDENHAIN ND 780 for following axes: - Left ram (axes X2 and Z2), crossrail * Two rams: - ram (right hand side) with 16-station ATC - ram (left hand side) with 4-station turret * Swarf conveyor
            faceplate diameter 1600 mm
            swing diameter 1800 mm
            turning height 1500 mm
            Control Heidenhain
            max. ram stroke 1200 mm
            faceplate turning speed range 0 - 200 U/min
            main drive motor 85 kW
            workpiece weight max. 8000 kg
            weight of the machine ca. 25 t
            dimensions of the machine ca. 8,4 x 4,5 x 5,3 m
            Description :
            In 2007 geometrically overhauled and modernized (retrofit)

            * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles:
            - Right ram (axes X1 and Z1), faceplate (S)
            * D.R.O. make HEIDENHAIN ND 780 for following axes:
            - Left ram (axes X2 and Z2), crossrail
            * Two rams:
            - ram (right hand side) with 16-station ATC
            - ram (left hand side) with 4-station turret
            * Swarf conveyor
          Datasheet
          Request / Contact

          Machining Center - Double Column-Vert

          used  Machining Center - Double Column-Vert KONDIA HM-2010


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08782 · Machining Center - Double Column-Vert

          KONDIA - HM-2010 - - 2011 - Heidenhain iTNC 530

          Technical details
          x-travel 2000 mm︱y-travel 1000 mm︱z-travel 510 mm︱Control Heidenhain iTNC 530 ︱total power requirement 54 kW︱weight of the machine ca. 14 t︱dimensions of the machine ca. m︱
          3-axis vertical machining center / double column Equipment: direct measuring system, electron. handwheel HR 410 internal coolant supply 40bar chip conveyor mode 4 software option2 BLUM laser prepared for 4. axis internalair-blast supply glass windows Operation hours: approx. 28.000 h "machine on" approx. 15.000 h "spindle on" Price of new machine around EUR 290.000,- x-travel 2.000 mm y-travel 1.000 mm z-travel 510 mm Table dimensions 2.060 x 1.000 mm turning speeds 17.000 1/min control HEIDENHAIN iTNC 530 tool taper SK 40 big plus tool change unit 40 Pos. drive capacity - spindle motor 31,5 kW total power requirement 54 kW dimensions of the machine ca. m weight of the machine ca. 14 t
            x-travel 2000 mm
            y-travel 1000 mm
            z-travel 510 mm
            Control Heidenhain iTNC 530
            total power requirement 54 kW
            weight of the machine ca. 14 t
            Description :
            3-axis vertical machining center / double column

            Equipment:
            direct measuring system,
            electron. handwheel HR 410
            internal coolant supply 40bar
            chip conveyor
            mode 4
            software option2
            BLUM laser
            prepared for 4. axis
            internalair-blast supply
            glass windows

            Operation hours:
            approx. 28.000 h "machine on"
            approx. 15.000 h "spindle on"

            Price of new machine around EUR 290.000,-


            x-travel 2.000 mm
            y-travel 1.000 mm
            z-travel 510 mm
            Table dimensions 2.060 x 1.000 mm
            turning speeds 17.000 1/min
            control HEIDENHAIN iTNC 530
            tool taper SK 40 big plus
            tool change unit 40 Pos.
            drive capacity - spindle motor 31,5 kW
            total power requirement 54 kW
            dimensions of the machine ca. m
            weight of the machine ca. 14 t




          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal STARRAG-HECKERT HEC 400 D


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05829 · Machining Center - Horizontal

          STARRAG-HECKERT - HEC 400 D - - 2017 - Siemens 840 D sl

          Technical details
          x-travel 650 mm︱y-travel 650 mm︱z-travel 680 mm︱Control Siemens 840 D sl ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 650 mm
            y-travel 650 mm
            z-travel 680 mm
            Control Siemens 840 D sl
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MCM ACTION 2600 FFS


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05884 · Machining Center - Horizontal

          MCM - ACTION 2600 FFS - - 2008 - Fanuc 16 MB

          Technical details
          x-travel 2600 mm︱y-travel 1600 mm︱z-travel 1700 mm︱Control Fanuc 16 MB ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 42 x 18 m︱
          The system requires a space of approx. 42 x 18 m It is designed for "fully automatic operation" in 3 shifts. Components with tolerances of <0.01 mm were produced on the system. Equipment: CNC control Fanuc 16 MB 20-pos pallet changer Pallet size 1250 x 1000 mm Interference circle diameter up to 2700 mm Vertical tool magazine with 599 places HSK-A100 from 3 modules on 4 levels Rotary table (B-axis) with 3,600,000 angular positions Table load 4000 kg Spindle speeds 8,000 rpm. Motor power 26/37 kW Torque 605/707 Nm Chip disposal through two jet pipes in the existing central Chip disposal system Connection to an in-house central coolant system. IKZ spindle with supply of coolant through the center of the tool Cooling unit for working spindle use Electrical control cabinet with air conditioning Protective cover for the work area Protective fence cladding, sheet metal below and safety glass above, for the entire working area of ??the machine. Buffer shelf with 5 tool spaces for quick tool provision Tool cone cleaning High pressure coolant supply 65 bar Laser control of tool availability Inductive button for temperature compensation on the electrospindle Tool Monitor Renishaw button type RMP 60 Rotoclear AR aspirator Machine preparation for hydraulic clamping (on the turntable) Automation of the plant
            x-travel 2600 mm
            y-travel 1600 mm
            z-travel 1700 mm
            Control Fanuc 16 MB
            dimensions of the machine ca. 42 x 18 m
            Description :
            The system requires a space of approx. 42 x 18 m
            It is designed for "fully automatic operation" in 3 shifts.
            Components with tolerances of <0.01 mm were produced on the system.

            Equipment:
            CNC control Fanuc 16 MB
            20-pos pallet changer
            Pallet size 1250 x 1000 mm
            Interference circle diameter up to 2700 mm
            Vertical tool magazine with 599 places HSK-A100
            from 3 modules on 4 levels
            Rotary table (B-axis) with 3,600,000 angular positions
            Table load 4000 kg
            Spindle speeds 8,000 rpm.
            Motor power 26/37 kW
            Torque 605/707 Nm
            Chip disposal through two jet pipes in the existing central
            Chip disposal system
            Connection to an in-house central coolant system.
            IKZ spindle with supply of coolant through the center of the tool
            Cooling unit for working spindle use
            Electrical control cabinet with air conditioning
            Protective cover for the work area
            Protective fence cladding, sheet metal below and safety glass above,
            for the entire working area of ??the machine.
            Buffer shelf with 5 tool spaces for quick tool provision
            Tool cone cleaning
            High pressure coolant supply 65 bar
            Laser control of tool availability
            Inductive button for temperature compensation on the electrospindle
            Tool Monitor
            Renishaw button type RMP 60
            Rotoclear
            AR aspirator
            Machine preparation for hydraulic clamping (on the turntable)
            Automation of the plant
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MAZAK FH 6800


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06043 · Machining Center - Horizontal

          MAZAK - FH 6800 - - 1999-09 - Mazatrol 640M

          Technical details
          x-travel 1050 mm︱y-travel 800 mm︱z-travel 880 mm︱Control Mazatrol 640M ︱tool taper 50 SK︱no. of tools in magazin 80 ︱pallet size: 630 x 630 mm︱numbers of pallets 2 ︱table - indexing 360 x 1° deg︱total power requirement 60,4 kVA︱weight of the machine ca. 19,7 t︱dimensions of the machine ca. m︱pallet-changer
            x-travel 1050 mm
            y-travel 800 mm
            z-travel 880 mm
            Control Mazatrol 640M
            tool taper 50 SK
            no. of tools in magazin 80
            pallet size: 630 x 630 mm
            numbers of pallets 2
            table - indexing 360 x 1° deg
            total power requirement 60,4 kVA
            weight of the machine ca. 19,7 t
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MAZAK FH 880


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06044 · Machining Center - Horizontal

          MAZAK - FH 880 - - 1997-11 - Mazatrol

          Technical details
          x-travel 1300 mm︱y-travel 1100 mm︱z-travel 1000 mm︱Control Mazatrol ︱tool taper 50 SK︱no. of tools in magazin 80 ︱pallet size: 800 x 800 mm︱numbers of pallets 2 ︱rotary table: gesteuert 4. Achse 4-axis ︱total power requirement kVA︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱pallet-changer
            x-travel 1300 mm
            y-travel 1100 mm
            z-travel 1000 mm
            Control Mazatrol
            tool taper 50 SK
            no. of tools in magazin 80
            pallet size: 800 x 800 mm
            numbers of pallets 2
            rotary table: gesteuert 4. Achse 4-axis
            weight of the machine ca. 24 t
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal EUMACH UMC 1000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05685 · Machining Center - Universal

          EUMACH - UMC 1000 - - August 2013 - Heidenhain iTNC 530

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 700 mm︱Control Heidenhain iTNC 530 ︱total power requirement 60 kVA︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          5-axis universal machining center All tool holders including tools (each approx. 100 pieces) and the shrinking device «Haimer» for the tools. Reason for exemption: production task Purchase price in 2014 according to the order confirmation SFR 596.300, - First machine installation in 2015 Furnishing: CNC control Heidenhain iTNC 530 5-axis simultaneous interpolation Built-in high performance spindle Glass scales X, Y, Z axis Direct measurement of C and B axis Milling spindle Peron spindle P18, max. 18000 rpm. Spindle nose HSK-A63 Power 25/32 kW (S1-100% / S6-30 min.) Torque 124/154 Nm (S1-100% / S6-30 min.) Air through the spindle Internal coolant supply IKZ 40 bar Switchable from 40 to 20 bar 52-fold side tool changer HSK-A63 Automatic laser tool measurement Fracture monitoring Renishaw NC-4 with software toolset NC Version with transmitter-receiver separated) Tool length at least 110 mm from the spindle Renishaw RMP-60 touch probe with Software Inspection Plus Precision calibration device including calibration ball With holder and calibration software Heidenhain Kinematic Opt. 48, needs the Renishaw RMP-60 option Heidenhain 19 "color screen Heidenhain option DCM Interference monitoring and display of the machine with prevention of collision with machine parts.
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 700 mm
            Control Heidenhain iTNC 530
            total power requirement 60 kVA
            weight of the machine ca. 15 t
            Description :
            5-axis universal machining center
            All tool holders including tools (each
            approx. 100 pieces) and the shrinking device «Haimer» for the tools.
            Reason for exemption: production task
            Purchase price in 2014 according to the order confirmation SFR 596.300, -
            First machine installation in 2015

            Furnishing:
            CNC control Heidenhain iTNC 530
            5-axis simultaneous interpolation
            Built-in high performance spindle
            Glass scales X, Y, Z axis
            Direct measurement of C and B axis
            Milling spindle Peron spindle P18, max. 18000 rpm.
            Spindle nose HSK-A63
            Power 25/32 kW (S1-100% / S6-30 min.)
            Torque 124/154 Nm (S1-100% / S6-30 min.)
            Air through the spindle
            Internal coolant supply IKZ 40 bar
            Switchable from 40 to 20 bar
            52-fold side tool changer HSK-A63
            Automatic laser tool measurement
            Fracture monitoring Renishaw NC-4 with software toolset NC
            Version with transmitter-receiver separated)
            Tool length at least 110 mm from the spindle
            Renishaw RMP-60 touch probe with Software Inspection Plus
            Precision calibration device including calibration ball
            With holder and calibration software Heidenhain Kinematic Opt. 48,
            needs the Renishaw RMP-60 option
            Heidenhain 19 "color screen
            Heidenhain option DCM
            Interference monitoring and display of the machine with prevention
            of collision with machine parts.
          Datasheet
          Request / Contact
          used  Machining Center - Universal DMG Mori DMU 105 monoBlock


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E06000 · Machining Center - Universal

          DMG Mori - DMU 105 monoBlock - - 2021 - Heidenhain TNC 640

          Technical details
          x-travel 1135 mm︱y-travel 1050 mm︱z-travel 750 mm︱Control Heidenhain TNC 640 ︱spindle turning speed range 20000 U/min︱total power requirement kW︱weight of the machine ca. 17,7 t︱dimensions of the machine ca. m︱
          5-axis universal machining center. traverse paths: X axis 1135 mm Y-axis 1050 mm Z axis 750mm Max. workpiece diameter 1240 mm Max. workpiece height 690 mm Max. workpiece weight 2000 kg CNC control CELOS with Heidenhain TNC 640 Spindle speed max. 20000 rpm. Spindle mount HSK-A 63 NC rotary table Tool changer 60-fold Production package: Coolant system 600 liters 40 bar / 23 l/min. Spray gun for flushing chips Oil and emulsion mist separator Cooling puff of air Infrared probe Heidenhain Blum Laser tool measurement 3D quickSET Operating mode 4 Axis optimization ISO 230-2 in X/Y/Z Electronic hand wheel Connectivity from DMG MORI IoTonnector Connector for machine data NET service SERVICE camera DMG MORI Monitoring Messenger V4 DMG MORI maintenance service agent
            x-travel 1135 mm
            y-travel 1050 mm
            z-travel 750 mm
            Control Heidenhain TNC 640
            spindle turning speed range 20000 U/min
            weight of the machine ca. 17,7 t
            Description :
            5-axis universal machining center.

            traverse paths:
            X axis 1135 mm
            Y-axis 1050 mm
            Z axis 750mm

            Max. workpiece diameter 1240 mm
            Max. workpiece height 690 mm
            Max. workpiece weight 2000 kg

            CNC control CELOS with Heidenhain TNC 640
            Spindle speed max. 20000 rpm.
            Spindle mount HSK-A 63
            NC rotary table
            Tool changer 60-fold
            Production package:
            Coolant system 600 liters
            40 bar / 23 l/min.
            Spray gun for flushing chips
            Oil and emulsion mist separator
            Cooling puff of air

            Infrared probe Heidenhain
            Blum Laser tool measurement
            3D quickSET
            Operating mode 4
            Axis optimization ISO 230-2 in X/Y/Z
            Electronic hand wheel

            Connectivity from DMG MORI
            IoTonnector
            Connector for machine data
            NET service
            SERVICE camera

            DMG MORI Monitoring
            Messenger V4

            DMG MORI maintenance
            service agent
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Профіль торговця: Knops Werkzeugmaschinen GmbH & Co. KG

          Зв'язатися з трейдером



            Knops Werkzeugmaschinen GmbH & Co. KG
           Конрад-Цузе-штрассе, 5
            40789 - Монхайм
            Німеччина
            02173 - 39494-0">02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de

          Профіль Трейдера




          Knops Werkzeugmaschinen GmbH  &  Co. KG   40789 - Monheim Konrad-Zuse-Straße 5 Deutschland
          Knops Werkzeugmaschinen GmbH & Co. KG

          Konrad-Zuse-Straße 5



          Contact Trader


            Knops Werkzeugmaschinen GmbH & Co. KG
           Konrad-Zuse-Straße 5
            40789 - Monheim
            Deutschland
            02173 - 39494-0
            02173 - 39494-29
            maschinen@knops.de
            www.knops.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Doppelständer-Vert · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Brennschneidmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Drehbarer Aufspanntisch · Drehmaschine - zyklengesteuert · Ersatzteile · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine - Doppelständer · Flachschleifmaschine - Horizontal · Fräseinrichtung · Fräsmaschine - Universal · Führungsbahnenschleifmaschine · Innenschleifmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Keilnutenziehmaschine · Keilwellenschleifmaschine · Konsolfräsmaschine · Konsolfräsmaschine - universal · Langgewinde- und Abwälzfräsmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Plan- und Spitzendrehbank · Planscheibe · Plattenbohrwerk - Traghülse · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Roboter - Handling · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtaktmaschine · Rundtisch · Rundtischflachschleifmaschine - 2 Spind. · Schweißdrehtisch - rund · Schwerdrehmaschine · Senkerodiermaschine · Stanzautomat-Einständer · Säge- und Bohranlage · Tafelschere - hydraulisch · Tieflochbohrmaschine · Traghülsenplattenbohrwerk · Walzenschleifmaschine · Werkzeug Voreinstellgerät · Werkzeugschleifmaschine - Universal · Zahnrad-Abwälzfräsmaschine - vertikal · Zubehör ·