Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          MEB Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Caterpillar

          used  Caterpillar MEB Materialvorschub EP 15/40


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181004 · Caterpillar

          MEB - Materialvorschub EP 15/40 - - -

          Technical details
          Haul-off force -- N︱Press length 115 mm︱Belt width 40 mm︱
            Haul-off force -- N
            Press length 115 mm
            Belt width 40 mm
          Datasheet
          Request / Contact
          used  Caterpillar MEB Materialvorschub 30/85


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181006 · Caterpillar

          MEB - Materialvorschub 30/85 - - -

          Technical details
          Haul-off force -- N︱Press length 260 mm︱Belt width 85 mm︱
            Haul-off force -- N
            Press length 260 mm
            Belt width 85 mm
          Datasheet
          Request / Contact

          Plants, complete

          used  Plants, complete HAN S LASER OP Maskenanlage


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211102 · Plants, complete

          HAN S LASER - OP Maskenanlage - - ca. 2021 -

          Technical details
          machine measurements 6.850 x 3.600 x 1.900 mm︱machine weight 5.000 kg︱power capacity 9 kW︱
          Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection. - CE certified is available - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm - Weight approx.: 5,000 kg - Paint finish: RAL 9003 - Voltage: 220V AC, 50 Hz - Total power approx.: 9 kW
            machine measurements 6.850 x 3.600 x 1.900 mm
            machine weight 5.000 kg
            power capacity 9 kW
            Description :
            Condition: used - as good as new
            unit is still completely packed

            Specification: Medical surgical mask system complete

            Consisting of:
            - See sketches in the attachment

            Summary of the equipment:
            This machine is mainly used for automatic forming of plane mask:
            the whole roll of cloth is driven by roller after being unrolled,
            and the cloth is folded and wrapped automatically.
            The nose bridge strip is rolled up for traction and unrolled.
            After cutting with a fixed length, it is imported into the edge cloth.
            The two sides are welded to the seal by ultrasonic welding.
            The mask was transported to two mask ear belt welding stations
            by the assembly line, and the mask was finally formed by ultrasonic
            welding.
            After the mask is made, it is transported to the flat belt line
            through the assembly line for collection.

            - CE certified is available
            - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm
            - Weight approx.: 5,000 kg
            - Paint finish: RAL 9003
            - Voltage: 220V AC, 50 Hz
            - Total power approx.: 9 kW

          Datasheet
          Request / Contact
          used  Plants, complete HAN S LASER FFP 2 Maskenanlage N95


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211101 · Plants, complete

          HAN S LASER - FFP 2 Maskenanlage N95 - - ca. 2019 -

          Technical details
          machine measurements 9.657 x 1.472 x 1.985 mm︱machine weight -- kg︱power capacity -- kW︱
          Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled
            machine measurements 9.657 x 1.472 x 1.985 mm
            machine weight -- kg
            power capacity -- kW
            Description :
            Condition: used - as good as new

            Specification: FFP 2 N95 mask system complete

            Consisting of:
            - see sketches in the plant
            - cycle time approx.: 35 - 50 pieces/min
            - not CE certified
            - Space requirement approx.: 9,657 x 1,472 x 1,985 mm
            - Completely assembled

          Datasheet
          Request / Contact
          used  Plants, complete GERLACH Maschinenbau Heissluft Shock Kanal 111


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G200301 · Plants, complete

          GERLACH Maschinenbau - Heissluft Shock Kanal 111 - - 2015 -

          Technical details
          machine measurements 3.000 mm︱machine weight -- kg︱power capacity 90 kW︱
            machine measurements 3.000 mm
            machine weight -- kg
            power capacity 90 kW
          Datasheet
          Request / Contact
          used  Plants, complete RSL 6000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G170803 · Plants, complete

          RSL - 6000 - - 2015 -

          Technical details
          machine measurements 8.000 mm︱machine weight 9.800 kg︱power capacity 17,5 kW︱
          Condition: used Specification: Batch-off plant – used - max. width rubber sheet: 600 mm - thickness rubber sheet: 4 – 10 mm - distance between banging bars: effective 140 mm - max. pendant length hanging sheet: 3600 mm - take-off linear speed: 4 – 35 m/min. frequency control of motor speed linear speed: - swinging: 0 – 40 m/min. - hinging: 0 – 1,55 m/min. - no. of cooling fans: 10 set - power cooling fans: 0,75 kW/set - total length of line: 8.000 mm - total power: 17,5 kW - final temperature sheet: room temperature +5°C - compressed air pressure: 0,4 – 0,6 Mpa - cross and longitudinal cutter, wig-wag packer for pallets - total weight: ca. 9800 kg STUCTURAL FEATURES: 1. take-off device is off the ring type conveyor belt with guide strip and without any union or joint, and equips with printer. Take-off conveyor belt, lifting and dip-in wire mesh belt all share one same frequency conversion AC speed regulating motor, which the conveying speed could be adjustable. 2. lifting bar is driven by one set cycloid pin wheel speed reducer through AC frequency conversion and the bar speed is synchronous as the speed of lifting device. 3. the sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying. 4. the hanging up area is fully closed, which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect.
            machine measurements 8.000 mm
            machine weight 9.800 kg
            power capacity 17,5 kW
            Description :
            Condition: used

            Specification: Batch-off plant – used

            - max. width rubber sheet: 600 mm
            - thickness rubber sheet: 4 – 10 mm
            - distance between banging bars: effective 140 mm
            - max. pendant length hanging sheet: 3600 mm
            - take-off linear speed: 4 – 35 m/min.
            frequency control of motor speed
            linear speed:
            - swinging: 0 – 40 m/min.
            - hinging: 0 – 1,55 m/min.
            - no. of cooling fans: 10 set
            - power cooling fans: 0,75 kW/set
            - total length of line: 8.000 mm
            - total power: 17,5 kW
            - final temperature sheet: room temperature +5°C
            - compressed air pressure: 0,4 – 0,6 Mpa
            - cross and longitudinal cutter, wig-wag packer for pallets
            - total weight: ca. 9800 kg

            STUCTURAL FEATURES:

            1. take-off device is off the ring type conveyor belt with guide strip
            and without any union or joint, and equips with printer. Take-off
            conveyor belt, lifting and dip-in wire mesh belt all share one same
            frequency conversion AC speed regulating motor, which the conveying
            speed could be adjustable.

            2. lifting bar is driven by one set cycloid pin wheel speed reducer through
            AC frequency conversion and the bar speed is synchronous as the speed of
            lifting device.

            3. the sheet is uniformly coated with the lubricator by dipping without
            polluting the environment. Its cooling effect is better than the spraying.

            4. the hanging up area is fully closed, which adopts the blower to blow
            the sheet at a slant. So it improves the air flowing direction and
            cooling effect.
          Datasheet
          Request / Contact
          used  Plants, complete HANS VON DER HEYDE Pultrusions-/Heizlinie


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G200701 · Plants, complete

          HANS VON DER HEYDE - Pultrusions-/Heizlinie - - 2015 -

          Technical details
          machine measurements 12.200x1.800x800 mm︱machine weight 1.040 kg︱power capacity 27 kW︱
            machine measurements 12.200x1.800x800 mm
            machine weight 1.040 kg
            power capacity 27 kW
          Datasheet
          Request / Contact
          used  Plants, complete NELA ROVI Kontrollautomat fuer O-Ringe


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220102 · Plants, complete

          NELA ROVI - Kontrollautomat fuer O-Ringe - - 2011 -

          Technical details
          machine measurements 2.200 x 1.200 x 2.260 mm︱machine weight 1.000 kg︱power capacity -- kW︱
          Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg
            machine measurements 2.200 x 1.200 x 2.260 mm
            machine weight 1.000 kg
            power capacity -- kW
            Description :
            Condition: used

            Specification: automatic control machine for O-rings - second-hand
            rotary transfer machine with 16 pick-up stations

            - year of construction approx.: 2011
            - pick-up stations: 16
            - measuring range: ID from 55 - 90 mm
            cord from 2,5 - 3,5 mm (ID 55 - 70 mm)
            cord from 2.5 - 4.5 mm (ID 70 - 90 mm)
            - Part throughput: approx. 3 - 4 seconds per part
            approx. 900 - 1,200 parts per hour
            approx. 21,600 - 28,800 parts per day
            - Technical application: surface defect and crack detection
            on O-rings
            - Sorting function: Good, Bad, Undefined
            - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm
            - Weight approx.: 1,000 kg


          Datasheet
          Request / Contact
          used  Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220401 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 182 kW
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.

          Datasheet
          Request / Contact
          used  Plants, complete GERLACH Heizkanal HLK 150-1-110-12m


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220402 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 170 kW
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.

          Datasheet
          Request / Contact
          used  Plants, complete GERLACH Maschinenbau Heissluft Kanal HLK 114 Gas


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211104 · Plants, complete

          GERLACH Maschinenbau - Heissluft Kanal HLK 114 Gas - - 1991 -

          Technical details
          machine measurements 20.000 x 2.580 x 2.350 mm︱machine weight 6.000 kg︱power capacity 120 kW︱
          Condition: used - was in production until approx. mid November 2021 Specification: Hot air duct with cooling duct underneath - duct type: HLK 114 gas, gas heated - duct length: 18.000 mm - belt width: 150 mm - Belt lengths: - Upper belt: 39,430 mm - Middle belt: 38,110 mm - Lower belt: 37,360 mm - Max. profile height: 60 mm - Transport speed: 4 - 40 m/min - Drive motors: permanent-magnet gear motor 3x 0.37 kW, 170 V - Belt control motors: Three-phase motor 3x 0.045 kW, 220/380V/50Hz - Blow-in fan: RD7, 220/380V50Hz, 2.2 kW - Main exhaust fan: HRD 65/7, 380V/50Hz, 7.5 kW - Number of heating zones: 6x gas-heated - Gas burner: Nominal power: 20 kW/burner - Air temperature max.: 320°C - All ducts with fire extinguishing nozzles Cooling duct: - Drive motors: Permanent power geared motor 2x 0.37 kW, 170 V - Side channel compressor: SD 740, 380V/50Hz, 6 kW - Channel length: 18,000 mm - Belt lengths: Upper belt: 37,550 mm Lower belt: 38,890 mm - Belt width: 180 mm - Profile height max.: 60 mm - Transport speed: 4 - 40 m/min Documentation available in German. The gas burners were regularly serviced and replaced as required. - Heat exchanger: WT 160 G - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm (with platform for installation above of the duct) - Total weight of heat exchanger approx.: 1,000 kg with platform
            machine measurements 20.000 x 2.580 x 2.350 mm
            machine weight 6.000 kg
            power capacity 120 kW
            Description :
            Condition: used - was in production
            until approx. mid November 2021

            Specification: Hot air duct with cooling duct underneath

            - duct type: HLK 114 gas, gas heated
            - duct length: 18.000 mm
            - belt width: 150 mm
            - Belt lengths:
            - Upper belt: 39,430 mm
            - Middle belt: 38,110 mm
            - Lower belt: 37,360 mm
            - Max. profile height: 60 mm
            - Transport speed: 4 - 40 m/min
            - Drive motors: permanent-magnet gear motor
            3x 0.37 kW, 170 V
            - Belt control motors: Three-phase motor
            3x 0.045 kW, 220/380V/50Hz
            - Blow-in fan: RD7, 220/380V50Hz, 2.2 kW
            - Main exhaust fan: HRD 65/7, 380V/50Hz, 7.5 kW
            - Number of heating zones: 6x gas-heated
            - Gas burner: Nominal power: 20 kW/burner
            - Air temperature max.: 320°C
            - All ducts with fire extinguishing nozzles


            Cooling duct:
            - Drive motors: Permanent power geared motor
            2x 0.37 kW, 170 V
            - Side channel compressor: SD 740, 380V/50Hz, 6 kW
            - Channel length: 18,000 mm
            - Belt lengths:
            Upper belt: 37,550 mm
            Lower belt: 38,890 mm
            - Belt width: 180 mm
            - Profile height max.: 60 mm
            - Transport speed: 4 - 40 m/min

            Documentation available in German.
            The gas burners were regularly serviced and replaced as
            required.

            - Heat exchanger: WT 160 G
            - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm
            (with platform for installation above of the duct)
            - Total weight of heat exchanger approx.: 1,000 kg with platform

          Datasheet
          Request / Contact
          used  Plants, complete GERLACH Nachheizkanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220403 · Plants, complete

          GERLACH - Nachheizkanal - - 1989/2015 -

          Technical details
          machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015
            machine measurements Länge ca. 21.000 mm
            machine weight -- kg
            power capacity 200 kW
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Tempering range: 240°C - 340°C
            - Heating: gas heated
            - Control system: Siemens

            Heating duct extension by 2x 3m, 2015
            - The duct was extended by 2x 3m segments in 2016
            - The burners of the 21,000 mm system were renewed in 2015

          Datasheet
          Request / Contact
          used  Plants, complete MEB Batch-Off 700


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G181201 · Plants, complete

          MEB - Batch-Off 700 - - -

          Technical details
          machine measurements ca. 12.000 mm︱machine weight -- kg︱power capacity -- kW︱ 550 mm︱
            machine measurements ca. 12.000 mm
            machine weight -- kg
            power capacity -- kW
            550 mm
          Datasheet
          Request / Contact

          Mixer

          used  Mixer Meccaniche Moderne BETA 26


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D171102 · Mixer

          Meccaniche Moderne - BETA 26 - - n.b. -

          Technical details
          chamber volume 38 liter︱useable volume -- liter︱friction ca. 1:1,17 ︱motor drive power 110 KW︱
          SSpecification: internal mixer - used usable volume: approx. 38 litres (depending on the filling factor) - closing system: trap door - pneumatic ram: for material loading - gearbox: semi-unidrive system - Rotor geometry: tangential - Friction approx.: 1:1.17 (to be checked) - Slewing rings for water cooling new - AC motor: 110 KW - 400 V - 50 Hz - Safety device: according to applicable standards - paint: according to customer's request - electr. system: new - with frequency converter for adjustable speed - electr. control panel: new - machine wiring: new - general overhauled machine with 1 year warranty, with CE operating and maintenance instructions in English, with CE mark
            chamber volume 38 liter
            useable volume -- liter
            friction ca. 1:1,17
            motor drive power 110 KW
            Description :
            SSpecification: internal mixer - used

            usable volume: approx. 38 litres
            (depending on the filling factor)
            - closing system: trap door
            - pneumatic ram: for material loading
            - gearbox: semi-unidrive system
            - Rotor geometry: tangential
            - Friction approx.: 1:1.17 (to be checked)
            - Slewing rings for water cooling new
            - AC motor: 110 KW - 400 V - 50 Hz
            - Safety device: according to applicable standards
            - paint: according to customer's request
            - electr. system: new - with frequency converter for
            adjustable speed
            - electr. control panel: new
            - machine wiring: new
            - general overhauled machine

            with 1 year warranty, with CE operating and maintenance
            instructions in English, with CE mark


          Datasheet
          Request / Contact
          used  Mixer POMINI-FARREL BR Laboratory 1,5 l


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D190401 · Mixer

          POMINI-FARREL - BR Laboratory 1,5 l - - n.b. -

          Technical details
          chamber volume - liter︱useable volume 1,5 liter︱friction - ︱motor drive power 22 kW︱
          Condition: used - refurbished Specification: Laboratory Internal Mixer - used - Capacity: about 1,5 lts - Closing system: frontal door with pneumatic pistons - Pneumatic ram for loading of materials - Rotors model: tangential type - New rotary joints for water cooling - Painting: (Color RAL in according to your specifications) - DC engine: 22 kW; - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules Warranty: 1 year
            chamber volume - liter
            useable volume 1,5 liter
            friction -
            motor drive power 22 kW
            Description :
            Condition: used - refurbished

            Specification: Laboratory Internal Mixer - used

            - Capacity: about 1,5 lts
            - Closing system: frontal door with pneumatic pistons
            - Pneumatic ram for loading of materials
            - Rotors model: tangential type
            - New rotary joints for water cooling
            - Painting: (Color RAL in according to your specifications)
            - DC engine: 22 kW;
            - New electric cabinet with driving system for variable speed of rotors
            - N.1 new electric panel
            - New on board electric system on the machine
            - Safety devices in according to standard rules
            - Manual of use and maintenance in English language and CE marking
            - Reconditioned and guaranteed machine in according to standard rules

            Warranty: 1 year

          Datasheet
          Request / Contact
          used  Mixer POMINI-FARREL PX 80


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D190402 · Mixer

          POMINI-FARREL - PX 80 - - 2001 -

          Technical details
          chamber volume 80 liter︱useable volume -- liter︱friction -- ︱motor drive power 390 kW︱
          Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year
            chamber volume 80 liter
            useable volume -- liter
            friction --
            motor drive power 390 kW
            Description :
            Condition: used - overhauled - with warranty

            Specification: Internal mixer used

            - Capacity: about 80 lts
            - Rotors model: tangential type with 3 wings
            - Command gearbox: semi-unidrive type
            - Max speed rotors: about 60 rpm
            - Closing system: drop-door type
            - Hydraulic unit for drop-door system
            - Pneumatic hopper for loading material
            - DC engine: 390 kW - 1500 rpm - 440 V
            - New electric cabinet with driving system for variable speed of rotors
            - N.1 new electric panel
            - New on board electric system on the machine
            - Safety devices in according to standard rules
            - Manual of use and maintenance in English language and CE marking
            - Reconditioned and guaranteed machine in according to standard rules
            - Warranty: 1 year

          Datasheet
          Request / Contact
          used  Mixer AMK Aachen GmbH VI U-450


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-D190201 · Mixer

          AMK Aachen GmbH - VI U-450 - - 1987 -

          Technical details
          chamber volume - liter︱useable volume 450 liter︱friction - ︱motor drive power 30 kW︱
            chamber volume - liter
            useable volume 450 liter
            friction -
            motor drive power 30 kW
          Datasheet
          Request / Contact

          Preformers

          used  Preformers BARWELL Preformer MIDI


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-I220801 · Preformers

          BARWELL - Preformer MIDI - - 2001 -

          Technical details
          barrel diameter 200 mm︱max. barrel capacity 24,5 liter︱ram stroke -- mm︱
          Condition: used, Specification: Preformer - second-hand - total power: 12,4 kW - chamber volume: 24,5 litres - cylinder diameter: 200 mm - hydraulic pressure max.: 210 bar - operating voltage: 3x 380V / 50 Hz - Control voltage: 110 V - Total weight: 2,200 kg - Dimensions W/D/H approx.: 3,660 x 1,200 x 1,650 mm (see sketch)
            barrel diameter 200 mm
            max. barrel capacity 24,5 liter
            ram stroke -- mm
            Description :
            Condition: used,

            Specification: Preformer - second-hand

            - total power: 12,4 kW
            - chamber volume: 24,5 litres
            - cylinder diameter: 200 mm
            - hydraulic pressure max.: 210 bar
            - operating voltage: 3x 380V / 50 Hz
            - Control voltage: 110 V
            - Total weight: 2,200 kg
            - Dimensions W/D/H approx.: 3,660 x 1,200 x 1,650 mm
            (see sketch)

          Datasheet
          Request / Contact
          used  Preformers CROWE Economy E 40


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-I160601 · Preformers

          CROWE - Economy E 40 - - 1990 -

          Technical details
          barrel diameter 254 mm︱max. barrel capacity 40 dm³︱ram stroke 800 mm︱working pressure 250 bar︱throughput kg/h︱
            barrel diameter 254 mm
            max. barrel capacity 40 dm³
            ram stroke 800 mm
            working pressure 250 bar
          Datasheet
          Request / Contact
          used  Preformers BARWELL Preformer C3


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-I210301 · Preformers

          BARWELL - Preformer C3 - - 1982 -

          Technical details
          barrel diameter 254 mm︱max. barrel capacity 60 liter︱ram stroke -- mm︱
          Condition: used, Specification: blank vending machine - second-hand incl. tilting cooling unit Collectacool drive: - Hydraulic pump motor: 11 kW - Cutting motor: 1.1 kW - Vacuum pump motor: 2.2 kW - Heating power: 9 kW - Chamber volume: 60 kg - Cylinder diameter: 254 mm - Largest nozzle diameter: 190 mm - Operating voltage: 3x380 V / 50 Hz (Europe) - Total weight: 3,080 kg - incl. tilting cooling unit: Collectacool
            barrel diameter 254 mm
            max. barrel capacity 60 liter
            ram stroke -- mm
            Description :
            Condition: used,

            Specification: blank vending machine - second-hand
            incl. tilting cooling unit Collectacool

            drive:
            - Hydraulic pump motor: 11 kW
            - Cutting motor: 1.1 kW
            - Vacuum pump motor: 2.2 kW
            - Heating power: 9 kW
            - Chamber volume: 60 kg
            - Cylinder diameter: 254 mm
            - Largest nozzle diameter: 190 mm
            - Operating voltage: 3x380 V / 50 Hz (Europe)
            - Total weight: 3,080 kg
            - incl. tilting cooling unit: Collectacool

          Datasheet
          Request / Contact

          Roll calenders

          used  Roll calenders BERSTORFF 3-Walzen, I-Kalander


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-E170401 · Roll calenders

          BERSTORFF - 3-Walzen, I-Kalander - - n.b. -

          Technical details
          roll diameter 250 mm︱roll length 500 mm︱rolls drilled Kernbohrung ︱nip adjustment mechanisch ︱drive power: kW︱
            roll diameter 250 mm
            roll length 500 mm
            rolls drilled Kernbohrung
            nip adjustment mechanisch
            Description :

          Datasheet
          Request / Contact

          Extruders (plastic)

          used  Extruders (plastic) Sikoplast HKS 180-120, Granulieranlage


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-M210902 · Extruders (plastic)

          Sikoplast - HKS 180-120, Granulieranlage - - n.b. -

          Technical details
          screw ø: 180 mm︱screw length: 30D ︱screw speedl: -- U/min︱drive power: 90 kW︱
          Condition: used - Specification: plastic granulating line extruder HKS 180-120 with side dosing make Sikoplast Overhauled 2015 - Usage: wetting of carbon fibre - Drive power: 90 kW - L/D ratio: 30 - Screw type: 3-zone screw - Throughput capacity: 80 - 250 kg - Atmospheric degassing: Yes - Vacuum degassing: No - with side dosing: make Sikoplast - Application: Dosing of raw materials into the extruder - Drive power: 11 kW - Speed: 1 - 36 rpm
            screw ø: 180 mm
            screw length: 30D
            screw speedl: -- U/min
            drive power: 90 kW
            Description :
            Condition: used -

            Specification: plastic granulating line extruder HKS 180-120
            with side dosing make Sikoplast
            Overhauled 2015

            - Usage: wetting of carbon fibre
            - Drive power: 90 kW
            - L/D ratio: 30
            - Screw type: 3-zone screw
            - Throughput capacity: 80 - 250 kg
            - Atmospheric degassing: Yes
            - Vacuum degassing: No

            - with side dosing: make Sikoplast
            - Application: Dosing of raw materials into the extruder
            - Drive power: 11 kW
            - Speed: 1 - 36 rpm

          Datasheet
          Request / Contact
          used  Extruders (plastic) KUHNE EXTREX 45GP K60E-33D


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-M210901 · Extruders (plastic)

          KUHNE - EXTREX 45GP K60E-33D - - 2012 -

          Technical details
          screw ø: 60 mm︱screw length: 33D ︱screw speedl: -- U/min︱drive power: 55 kW︱
          condition: used - Specification: Plastic extruder type EXTREX 45GP K60E-33D with melt pump make MAAG for compounding plastics - with Maag melt pump type EX 45-5 GP E - Screw extension: to the rear - Screw diameter: 60 mm - Screw length: 33D - Degassing opening: 13D from the front - Screw design: Type f, for PP, EMFS 6 - Processing of PP and PA products without sensing elements - Heating capacity: 8,4 kW - Flange heating: 1,6 kW - Heating zones: 5 pieces - Cooling zones: 5 pieces - Motor power: 55 kW - Extruder capacity approx.: min. 150 Kg, - Material: PP-MVI70 MAAG melting pump: - Type: EX 45-5 GP E - Specific delivery volume: 46.3 cm³/rev. Wide slot nozzle: - Slot width: 600 mm Visualisation: KEC-PC - in connection with Siemens control S7-300 and multi-temperature controllers - Simatic operations panel with 19" display
            screw ø: 60 mm
            screw length: 33D
            screw speedl: -- U/min
            drive power: 55 kW
            Description :
            condition: used -

            Specification: Plastic extruder type EXTREX 45GP K60E-33D
            with melt pump make MAAG
            for compounding plastics

            - with Maag melt pump type EX 45-5 GP E
            - Screw extension: to the rear
            - Screw diameter: 60 mm
            - Screw length: 33D
            - Degassing opening: 13D from the front
            - Screw design: Type f, for PP, EMFS 6
            - Processing of PP and PA products without sensing elements
            - Heating capacity: 8,4 kW
            - Flange heating: 1,6 kW
            - Heating zones: 5 pieces
            - Cooling zones: 5 pieces
            - Motor power: 55 kW
            - Extruder capacity approx.: min. 150 Kg,
            - Material: PP-MVI70

            MAAG melting pump:
            - Type: EX 45-5 GP E
            - Specific delivery volume: 46.3 cm³/rev.

            Wide slot nozzle:
            - Slot width: 600 mm

            Visualisation: KEC-PC
            - in connection with Siemens control S7-300
            and multi-temperature controllers
            - Simatic operations panel with 19" display

          Datasheet
          Request / Contact
          used  Extruders (plastic) KUHNE K70-24D


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-M201101 · Extruders (plastic)

          KUHNE - K70-24D - - 1998 -

          Technical details
          screw ø: 70 mm︱screw length: 24D ︱screw speedl: -- U/min︱drive power: 70 kW︱
          condition: used - Specification: Plastic extruder type K70-24D with melting pump and suction conveyor - with Maag melting pump and suction conveyor - Screw diameter: 70 mm - Screw length approx.: 1,680 mm - Length of the snail: 24D - Motor power: 70 kW - Snail geometry: classic polyphine screw, which is designed as a barrier screw. This means with shear and mixing section. - Output approx.: 120 Kg, PP standard - Dimensions W/D/H approx.: 4,000 x 1,200 x 2250 mm Package two approx.: 1,200 x 800 x 1,100 mm
            screw ø: 70 mm
            screw length: 24D
            screw speedl: -- U/min
            drive power: 70 kW
            Description :
            condition: used -

            Specification: Plastic extruder type K70-24D
            with melting pump and suction conveyor

            - with Maag melting pump and suction conveyor
            - Screw diameter: 70 mm
            - Screw length approx.: 1,680 mm
            - Length of the snail: 24D
            - Motor power: 70 kW
            - Snail geometry: classic polyphine screw,
            which is designed as a barrier screw.
            This means with shear and mixing section.
            - Output approx.: 120 Kg, PP standard
            - Dimensions W/D/H approx.: 4,000 x 1,200 x 2250 mm
            Package two approx.: 1,200 x 800 x 1,100 mm

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          MEB Maschinenhandel GmbH   30826 - Garbsen Schwalbenweg 4 Deutschland
          MEB Maschinenhandel GmbH

          Schwalbenweg 4



          Contact Trader


            MEB Maschinenhandel GmbH
           Schwalbenweg 4
            30826 - Garbsen
            Deutschland
            (0)5031 9394-634
           
            info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
            Contact person:

           




          Machine category


          Abwickelhaspel · Anlagen, komplett · Extruder Gummi · Extruder Kunststoff · Gummi-Spritzgussmaschine · Kalander · Mischer · Mooney Viscometer · Raupenabzug Bandabzug · Rheometer · Rohlingsautomat · RPA (Rubber Process Analyzer) · Schneidmaschinen · Sonstiges · Spitzgussmaschinen (Kunststoff) · Vulkanisierpresse · Walzwerk · Zugprüfmaschine ·