Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Matthias Ehlers Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe HURCO TM 8 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021024 · CNC Lathe

          HURCO - TM 8 i - - 2019 - MAX5 - Single

          Technical details
          turning diameter 256 mm︱control MAX5 - Single ︱turning diameter over bed 525 mm︱turning diameter over cross slideways 300 mm︱main spindle: ︱turning speed range - main spindle max. 4000 min/-1︱drive capacity - main spindle 23 kW︱max. torque 221 Nm︱chucking diameter 210 mm︱tool turret: ︱number of tool placed 12 Stück︱Drill shank diameter 32 mm︱travel: ︱x-axis 203 mm︱z-axis 550 mm︱feeds: ︱rapid traverse 30 x 30 m/min︱machine weight ab. 4050 kg︱dimensions of the machine ca. 4492 x 2729 x 2191 mmxmmxmm︱
          The machine can be viewed under power by appointment and is in our estimation in like new condition. technical features: - Hinge band - chip conveyor - Chips - Splash guard - Cabin - Part catcher (no unrestricted catching capacity) integrated into the machine - Tool calibration - coolant and air gun - three-jaw chuck - manual tailstock with programmable quill - Collet chuck Kitagawa QCRL60A6 / Collet Chuck D-185 E - Operating hours / spindle hours: <100 h Further data files on request. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 256 mm
            control MAX5 - Single
            turning diameter over bed 525 mm
            turning diameter over cross slid. 300 mm
            turning speed range - main spind. max. 4000 min/-1
            drive capacity - main spindle 23 kW
            max. torque 221 Nm
            chucking diameter 210 mm
            number of tool placed 12 Stück
            Drill shank diameter 32 mm
            x-axis 203 mm
            z-axis 550 mm
            rapid traverse 30 x 30 m/min
            machine weight ab. 4050 kg
            dimensions of the machine ca. 4492 x 2729 x 2191 mmxmmxmm
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in like new condition.

            technical features:

            - Hinge band - chip conveyor
            - Chips - Splash guard - Cabin
            - Part catcher (no unrestricted catching capacity) integrated into the machine
            - Tool calibration
            - coolant and air gun
            - three-jaw chuck
            - manual tailstock with programmable quill
            - Collet chuck Kitagawa QCRL60A6 / Collet Chuck D-185 E

            - Operating hours / spindle hours: <100 h

            Further data files on request.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe VDF BOEHRINGER NG 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020106 · CNC Lathe

          VDF BOEHRINGER - NG 2000 - - 2000 - SIEMENS 840 D

          Technical details
          turning diameter 290 mm︱turning length 850 mm︱control SIEMENS 840 D ︱speeds 30 - 3000 U/min︱total power requirement 65 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 5x2x2 m︱
          In our opinion, the machine is in good condition used condition. Equipped with: C-axis Tool Chip conveyor NC tailstock *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 290 mm
            turning length 850 mm
            control SIEMENS 840 D
            speeds 30 - 3000 U/min
            total power requirement 65 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 5x2x2 m
            Description :
            In our opinion, the machine is in good condition
            used condition.

            Equipped with:
            C-axis
            Tool
            Chip conveyor
            NC tailstock


            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe COLCHESTER CNC 5000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021008 · CNC Lathe

          COLCHESTER - CNC 5000 - - 1990 - Fanuc

          Technical details
          turning diameter 500 mm︱turning length 4000 mm︱control Fanuc ︱greates pass round over bed 635 mm︱swing diameter over face slide 390 mm︱main spindle: ︱turning speed range - main spindle 15 - 1500 min/-1︱drive capacity - main spindle 18,5 kW︱spindle bore 118 mm︱spindle head D1-11 Camlock
          In our assessment, the machine is in a very good condition Status. The machine can be viewed under power by appointment. Technical features: - Swivel turret from Sauter - manual tailstock - fixed and moving steady rest - three-jaw chuck - documentation *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            turning diameter 500 mm
            turning length 4000 mm
            control Fanuc
            greates pass round over bed 635 mm
            swing diameter over face slide 390 mm
            turning speed range - main spind. 15 - 1500 min/-1
            drive capacity - main spindle 18,5 kW
            spindle bore 118 mm
            spindle head D1-11 Camlock
            Description :

            In our assessment, the machine is in a very good condition
            Status.
            The machine can be viewed under power by appointment.

            Technical features:
            - Swivel turret from Sauter
            - manual tailstock
            - fixed and moving steady rest
            - three-jaw chuck
            - documentation

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  CNC Lathe GILDEMEISTER GDS 65


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021017 · CNC Lathe

          GILDEMEISTER - GDS 65 - - 1990 - Eltron Pilot

          Technical details
          turning diameter max. 290 mm︱control Eltron Pilot ︱turning diameter over bed 600 mm︱main spindle: ︱turning speed range - main spindle 25 - 5000 min/-1︱drive capacity - main spindle 30 kW︱max. torque 360 Nm︱spindle bore 79 mm︱max. rod diameter 65 mm︱spindle head 170 ︱chucking diameter 250 mm︱tool turret: ︱number of tool places 12 Pos.︱travel: ︱x-axis 190 mm︱z-axis 450 mm︱feeds: ︱rapid traverse 15 x 15 m/min︱tip feed speed 5000 mm/min︱weight of the machine ca. 5,3 t︱
            turning diameter max. 290 mm
            control Eltron Pilot
            turning diameter over bed 600 mm
            turning speed range - main spind. 25 - 5000 min/-1
            drive capacity - main spindle 30 kW
            max. torque 360 Nm
            spindle bore 79 mm
            max. rod diameter 65 mm
            spindle head 170
            chucking diameter 250 mm
            number of tool places 12 Pos.
            x-axis 190 mm
            z-axis 450 mm
            rapid traverse 15 x 15 m/min
            tip feed speed 5000 mm/min
            weight of the machine ca. 5,3 t
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021028 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2008 - MAPPS III

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱Control MAPPS III ︱main spindle: ︱max. turning speeds 4000 min/-1︱max. rod diameter 80 mm︱tool turret: ︱tool taper BMT ︱number of tool places 12 Pos.︱turning speed range - driven tools 6000 kW︱x-axis 260 mm︱y-axis 795 mm︱z-axis 100 +/- 50 mm︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,0 x 2,2 m︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. technical features: - with tool drive - C-, Y-axis and counter spindle - Collet chuck main spindle - Chuck counter spindle - Part catcher - Loading magazine 3m Equipment: - Bar feeder interface - incl. high pressure system 50 bar - including documentation (if available) *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 366 mm
            turning length 705 mm
            Control MAPPS III
            max. turning speeds 4000 min/-1
            max. rod diameter 80 mm
            tool taper BMT
            number of tool places 12 Pos.
            turning speed range - driven too. 6000 kW
            x-axis 260 mm
            y-axis 795 mm
            z-axis 100 +/- 50 mm
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,2 x 2,0 x 2,2 m
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            technical features:
            - with tool drive
            - C-, Y-axis and counter spindle
            - Collet chuck main spindle
            - Chuck counter spindle
            - Part catcher
            - Loading magazine 3m

            Equipment:
            - Bar feeder interface
            - incl. high pressure system 50 bar
            - including documentation (if available)

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021027 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2007 - MAPPS III

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱Control MAPPS III ︱main spindle: ︱turning speed range - main spindle 4000 min/-1︱max. rod diameter 80 mm︱tool turret: ︱number of tool places 12 Pos.︱tool taper BMT ︱turning speed range - driven tools 6000 kW︱travel: ︱x-axis 260 mm︱y-axis 795 mm︱z-axis 100 +/- 50 mm︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,0 x 2,2 m︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. technical features: - with tool drive - C-, Y-axis and counter spindle - Collet chuck main spindle - Chuck counter spindle - Part catcher - Loading magazine 3m Equipment: - Bar feeder interface - incl. high pressure system 50 bar - including documentation (if available) *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 366 mm
            turning length 705 mm
            Control MAPPS III
            turning speed range - main spind. 4000 min/-1
            max. rod diameter 80 mm
            number of tool places 12 Pos.
            tool taper BMT
            turning speed range - driven too. 6000 kW
            x-axis 260 mm
            y-axis 795 mm
            z-axis 100 +/- 50 mm
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,2 x 2,0 x 2,2 m
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            technical features:
            - with tool drive
            - C-, Y-axis and counter spindle
            - Collet chuck main spindle
            - Chuck counter spindle
            - Part catcher
            - Loading magazine 3m

            Equipment:
            - Bar feeder interface
            - incl. high pressure system 50 bar
            - including documentation (if available)

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe SEIGER LC RECORD 2200


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606034 · Facing Lathe

          SEIGER - LC RECORD 2200 - - 2009 -

          Technical details
          weight of the machine ca. 21 t︱required space 8x4,2x3,2 m︱total power requirement 20 kW︱turning diameter over slide rest mm︱
            weight of the machine ca. 21 t
            required space 8x4,2x3,2 m
            total power requirement 20 kW
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled VDF BOEHRINGER DUS 560 x 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606028 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 560 x 2000 - - 1992 -

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱no. of turning speeds max. 2500 U/min︱total power requirement 25 kW︱weight of the machine ca. 7 t︱required space 5x2,3x2 m︱
          This machine can be viewed under power by appointment and is in our estimation in a technically good condition. Equipment and accessories: Bezel Tailstock Multifix type C The tools and clamping devices are not included in the scope of delivery. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            turning diameter 570 mm
            turning length 2000 mm
            no. of turning speeds max. 2500 U/min
            total power requirement 25 kW
            weight of the machine ca. 7 t
            required space 5x2,3x2 m
            Description :
            This machine can be viewed under power by appointment and
            is in our estimation in a technically good condition.

            Equipment and accessories:
            Bezel
            Tailstock
            Multifix type C

            The tools and clamping devices are not included in the scope of delivery.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal STARRAG HECKERT HEC  400 D


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606038 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 400 D - - 2015 - Siemens 840 D

          Technical details
          x-travel 650 mm︱y-travel 650 mm︱z-travel 680 mm︱spindle motor 24/31 kW︱Control Siemens 840 D ︱Number of working hours 37124 h︱spindle hours 15315 h︱main spindle: ︱Number of boring spindles 1 St.︱turning speed range - main spindle 50 - 10000 min/-1︱Drive power - main spindle 24/37 kW︱max. torque 230/350 Nm︱spindle bearing diameter 70 mm︱no. of tables 2 ︱round table 400 x 500 mm︱tool magazin: ︱tool taper HSK 63 ︱number of tool places 60 Pos.︱max. tool diameter 80/160 mm︱max. tool length 350 mm︱
          The machine can be viewed under power by appointment and is in our estimation in a very good condition. Equipment: - Power package - Clamping hydraulics 6 channels - IKZ up to 80 bar - Visa port - Renishaw OMP 60 probe - Tool breakage control - autom. Doors - pallet changer - KNOLL KF 400/1750 belt filter system - KNOLL 450 K-1 chip chain conveyor *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 650 mm
            y-travel 650 mm
            z-travel 680 mm
            spindle motor 24/31 kW
            Control Siemens 840 D
            Number of working hours 37124 h
            spindle hours 15315 h
            Number of boring spindles 1 St.
            turning speed range - main spind. 50 - 10000 min/-1
            Drive power - main spindle 24/37 kW
            max. torque 230/350 Nm
            spindle bearing diameter 70 mm
            no. of tables 2
            round table 400 x 500 mm
            tool taper HSK 63
            number of tool places 60 Pos.
            max. tool diameter 80/160 mm
            max. tool length 350 mm
            Description :

            The machine can be viewed under power by appointment and
            is in our estimation in a very good condition.

            Equipment:
            - Power package
            - Clamping hydraulics 6 channels
            - IKZ up to 80 bar
            - Visa port
            - Renishaw OMP 60 probe
            - Tool breakage control
            - autom. Doors
            - pallet changer
            - KNOLL KF 400/1750 belt filter system
            - KNOLL 450 K-1 chip chain conveyor

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal AVEREX HS 450 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606026 · Machining Center - Horizontal

          AVEREX - HS 450 i - - 2011 -

          Technical details
          x-travel 640 mm︱y-travel 610 mm︱z-travel 680 mm︱spindle taper: BT Big Plus 40︱size of pallet 400x400 mm︱rapid travel range 60.000 m/min︱workpiece weight max. 500 kg︱spindle turning speed range 40-15000 U/min︱total power requirement 15 kW︱weight of the machine ca. 11,7 t︱required space 5,4x3,9x2,6 m︱
          The machine can still be viewed under power and, according to our assessment, is in a technically excellent condition! The tools and clamping devices are not included in the scope of delivery. The machine is equipped with: IKZ 3-D probe B-axis Degree of indexation 0.001 ° Chip conveyor Tool changer, 80 places *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 640 mm
            y-travel 610 mm
            z-travel 680 mm
            spindle taper: BT Big Plus 40
            size of pallet 400x400 mm
            rapid travel range 60.000 m/min
            workpiece weight max. 500 kg
            spindle turning speed range 40-15000 U/min
            total power requirement 15 kW
            weight of the machine ca. 11,7 t
            required space 5,4x3,9x2,6 m
            Description :
            The machine can still be viewed under power and, according to our assessment, is in a technically excellent condition!

            The tools and clamping devices are not included in the scope of delivery.

            The machine is equipped with:
            IKZ
            3-D probe
            B-axis
            Degree of indexation 0.001 °
            Chip conveyor
            Tool changer, 80 places

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal Doerries Scharmann SOLON 4


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020098 · Machining Center - Horizontal

          Doerries Scharmann - SOLON 4 - - 1994 -

          Technical details
          x-travel 2400 mm︱y-travel 1800 mm︱z-travel 2000 mm︱A-axis +/- 95°︱b-axis 360 °︱turning speeds 20-6000 U/min︱spindle taper ISO 50 ︱table plate 800x800 mm︱table load 2,5 t︱swing circle 2400 mm︱workpiece length - max. 2250 mm︱work piece width 1050 mm︱total power requirement 35 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 15x10x6 m︱
          This machine can still be viewed under power in the factory and, in our opinion, is in good technical condition. Control: NUM Güttinger Farikat: NUM 1060 F Machine with transport system: Pallet stations in front of the machine 2 Setup station 1 Pallet storage locations 3 Pallets in the system 5 Accessories: with another unused 5-axis head *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 2400 mm
            y-travel 1800 mm
            z-travel 2000 mm
            A-axis +/- 95°
            b-axis 360 °
            turning speeds 20-6000 U/min
            spindle taper ISO 50
            table plate 800x800 mm
            table load 2,5 t
            swing circle 2400 mm
            workpiece length - max. 2250 mm
            work piece width 1050 mm
            total power requirement 35 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 15x10x6 m
            Description :
            This machine can still be viewed under power in the factory and, in our opinion, is in good technical condition.

            Control: NUM Güttinger
            Farikat: NUM 1060 F

            Machine with transport system:
            Pallet stations in front of the machine 2
            Setup station 1
            Pallet storage locations 3
            Pallets in the system 5

            Accessories:
            with another unused 5-axis head

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DMG Deckel Maho DMU 60 FD duoBLOCK


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020017 · Machining Center - Universal

          DMG Deckel Maho - DMU 60 FD duoBLOCK - - 2010 - Siemens 840D solutionline

          Technical details
          x-travel 600 mm︱y-travel 700 mm︱z-travel 600 mm︱Control Siemens 840D solutionline ︱main spindle: ︱turning speed range - main spindle 12000 min/-1︱capacity main spindle 19 kW︱max. torque 82 Nm︱spindle hours 18000 h︱tool taper HSK 63 ︱tool changer: 60 fach ︱rotary table: ︱table surface area Ø 630 mm︱max. table load 600 kg︱rapid travel x/y/z 60 mm/min︱Number of working hours 29000 h︱feed speeds 0-60000 mm/min︱rapid traverse 60 m/min︱input unit 0,001 mm︱
          The machine can be visited by appointment. Milling and turning in one clamping with Direct Drive table and speeds up to 1200 1 / min The machine is in very good condition. *** Changes and errors in the technical data and specifications as well Subject to prior sale!***
            x-travel 600 mm
            y-travel 700 mm
            z-travel 600 mm
            Control Siemens 840D solutionline
            turning speed range - main spind. 12000 min/-1
            capacity main spindle 19 kW
            max. torque 82 Nm
            spindle hours 18000 h
            tool taper HSK 63
            tool changer: 60 fach
            table surface area Ø 630 mm
            max. table load 600 kg
            rapid travel x/y/z 60 mm/min
            Number of working hours 29000 h
            feed speeds 0-60000 mm/min
            rapid traverse 60 m/min
            input unit 0,001 mm
            Description :
            The machine can be visited by appointment.

            Milling and turning in one clamping with Direct Drive table and speeds
            up to 1200 1 / min

            The machine is in very good condition.


            *** Changes and errors in the technical data and specifications as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical HURCO VM 10 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021014 · Machining Center - Vertical

          HURCO - VM 10 i - - 2019 - Max 5

          Technical details
          x-travel 660 mm︱y-travel 406 mm︱z-travel 508 mm︱Control Max 5 ︱distance spindle /table 102 - 610 mm︱main spindle: ︱max. turning speeds 12000 min/-1︱drive capacity - main spindle 11 kW︱work table: ︱table surface area 762 x 406 mm︱max. table load 1500 kg︱T-slots 3 x 18 H8 x 100 ︱tool changer: ︱tool taper SK 40 ︱number of tool places 20 Pos.︱max. tool diameter 89 mm︱max. tool length 250 mm︱max. tool weight 7 kg︱feeds: ︱rapid traverse 28/28/28 m/min︱
          The machine can be viewed under power by appointment and is in our estimation in like new condition. technical features: - MAX5 control with removable electronic handwheel - spindle cooler - Chip auger - Chips - Splash guard - Cabin - Operating hours / spindle hours: <100 h Further data files on request. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 660 mm
            y-travel 406 mm
            z-travel 508 mm
            Control Max 5
            distance spindle /table 102 - 610 mm
            max. turning speeds 12000 min/-1
            drive capacity - main spindle 11 kW
            table surface area 762 x 406 mm
            max. table load 1500 kg
            T-slots 3 x 18 H8 x 100
            tool taper SK 40
            number of tool places 20 Pos.
            max. tool diameter 89 mm
            max. tool length 250 mm
            max. tool weight 7 kg
            rapid traverse 28/28/28 m/min
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in like new condition.

            technical features:

            - MAX5 control with removable electronic handwheel
            - spindle cooler
            - Chip auger
            - Chips - Splash guard - Cabin

            - Operating hours / spindle hours: <100 h

            Further data files on request.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical KITAMURA Mycenter 3 XiF


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020061 · Machining Center - Vertical

          KITAMURA - Mycenter 3 XiF - - 2006 - Fanuc Series 16i-MB

          Technical details
          x-travel 760 mm︱y-travel 460 mm︱z-travel 455 mm︱control Fanuc Series 16i-MB ︱Speed 20000 U/min.︱tool taper BT 40 ︱tool changing time 3,2 sec︱workpiece dia. 80 mm︱workpiece weight 8 kg︱Number of tools 30 St.︱table-size 860 x 410 mm︱no. of tables 2 ︱max. table load 200 kg︱Feedrate X-,Y-,Z,- axis 0 - 15000 mm/min︱rapid traverse X-axis 30000 m/min︱ 30000 m/min︱rapid traverse Z-axis 24000 m/min︱total power requirement 25 kVA︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,1 x 0,65 x 1,75 m︱
          The machine can be viewed under power by appointment. Scope of delivery: - IKZ - 2-way pallet changer - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 760 mm
            y-travel 460 mm
            z-travel 455 mm
            control Fanuc Series 16i-MB
            Speed 20000 U/min.
            tool taper BT 40
            tool changing time 3,2 sec
            workpiece dia. 80 mm
            workpiece weight 8 kg
            Number of tools 30 St.
            table-size 860 x 410 mm
            no. of tables 2
            max. table load 200 kg
            Feedrate X-,Y-,Z,- axis 0 - 15000 mm/min
            rapid traverse X-axis 30000 m/min
            30000 m/min
            rapid traverse Z-axis 24000 m/min
            total power requirement 25 kVA
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,1 x 0,65 x 1,75 m
            Description :
            The machine can be viewed under power by appointment.

            Scope of delivery:
            - IKZ
            - 2-way pallet changer
            - chip conveyor

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HURCO VMX 30 mit 4/ 5 Achse


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020070 · Machining Center - Vertical

          HURCO - VMX 30 mit 4/ 5 Achse - - 2006 - Ultimax 4

          Technical details
          x-travel 760 mm︱y-travel 510 mm︱z-travel 610 mm︱control Ultimax 4 ︱main spindle: ︱max. turning speeds 10000 min/-1︱torque 210 Nm︱tool taper SK40Kitagawa TT 181 ︱faceplate diameter 180 mm︱centre height 180 mm︱spindle passage 40 mm︱tool turret: ︱number of tool places 24 Pos.︱Rapid traverse: X -Y-Z axis 30/ 30/ 20 m/min︱ 1000 kg︱
          The machine can be viewed under power by appointment. Equipment: - chip conveyor - IKZ with filter, 20 bar - Network, DXF software - Electronic handwheel - signal light - 4./5. Kitagawa axle, type: TT182BY-6 Further information: - Rotary union renewed - Tracking ball renewed - X-axis bearing renewed (09/2018) - spindle renewed (2017) - various laser measurements carried out (protocols available) - Comprehensive documentation / maintenance reports available The machine is in very good condition. *** Changes and errors in the technical data and information as well Subject to prior sale! ***
            x-travel 760 mm
            y-travel 510 mm
            z-travel 610 mm
            control Ultimax 4
            max. turning speeds 10000 min/-1
            torque 210 Nm
            tool taper SK40
            Kitagawa TT 181
            faceplate diameter 180 mm
            centre height 180 mm
            spindle passage 40 mm
            number of tool places 24 Pos.
            Rapid traverse: X -Y-Z axis 30/ 30/ 20 m/min
            1000 kg
            Description :
            The machine can be viewed under power by appointment.

            Equipment:
            - chip conveyor
            - IKZ with filter, 20 bar
            - Network, DXF software
            - Electronic handwheel
            - signal light
            - 4./5. Kitagawa axle, type: TT182BY-6

            Further information:
            - Rotary union renewed
            - Tracking ball renewed
            - X-axis bearing renewed (09/2018)
            - spindle renewed (2017)
            - various laser measurements carried out (protocols available)
            - Comprehensive documentation / maintenance reports available

            The machine is in very good condition.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical AXA VSC 3 - S / 50 / E


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606030 · Machining Center - Vertical

          AXA - VSC 3 - S / 50 / E - - 2006 -

          Technical details
          x-travel 5000 mm︱y-travel 900 mm︱z-travel 900 mm︱autom. controllable turning speeds 60-6.000 U/min U/min︱spindle taper 50 SK︱total power requirement 45 kW︱weight of the machine ca. 25 t︱required space 8,9m x 3,5m x 3,6m m︱
            x-travel 5000 mm
            y-travel 900 mm
            z-travel 900 mm
            autom. controllable turning spee. 60-6.000 U/min U/min
            spindle taper 50 SK
            total power requirement 45 kW
            weight of the machine ca. 25 t
            required space 8,9m x 3,5m x 3,6m m
          Datasheet
          Request / Contact
          used  Machining Center - Vertical Mazak VTC 30 C


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020093 · Machining Center - Vertical

          Mazak - VTC 30 C - - 1999 - Mazatrol M Plus

          Technical details
          x-travel 1660 mm︱y-travel 760 mm︱z-travel 660 mm︱control Mazatrol M Plus︱speeds 40 - 7000 U/min︱drive capacity - main spindle 11 kW︱table surface area 760x2000 mm︱number of tool places 24 Pos.︱tool taper SK 40︱total power requirement 32,8 kVA︱weight of the machine ca. 8,1 t︱dimensions of the machine ca. 6,0x4,0x3,5 m︱
          n our estimation, the machine is in good condition. The machine has no internal cooling through the spindle and no chip conveyor. *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 1660 mm
            y-travel 760 mm
            z-travel 660 mm
            control Mazatrol M Plus
            speeds 40 - 7000 U/min
            drive capacity - main spindle 11 kW
            table surface area 760x2000 mm
            number of tool places 24 Pos.
            tool taper SK 40
            total power requirement 32,8 kVA
            weight of the machine ca. 8,1 t
            dimensions of the machine ca. 6,0x4,0x3,5 m
            Description :
            n our estimation, the machine is in good condition.

            The machine has no internal cooling through the spindle and no chip conveyor.

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical OKUMA MC 5 VA


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021010 · Machining Center - Vertical

          OKUMA - MC 5 VA - - 1990 - OSP 5020

          Technical details
          x-travel 1050 mm︱y-travel 510 mm︱z-travel 6501 mm︱Control OSP 5020 ︱spindle tunring speed 4000 U/min︱table-size 1550 x 650 mm︱Number of working hours 15770 h︱spindle cone 50 ISO ︱number of tool places 20 Pos.︱tool taper BT 50
          The machine is in very good condition and can be viewed under power after appointment. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 1050 mm
            y-travel 510 mm
            z-travel 6501 mm
            Control OSP 5020
            spindle tunring speed 4000 U/min
            table-size 1550 x 650 mm
            Number of working hours 15770 h
            spindle cone 50 ISO
            number of tool places 20 Pos.
            tool taper BT 50
            Description :
            The machine is in very good condition and can be viewed under power after
            appointment.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis UNITECH FB 63


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020079 · Milling Machining Centers 5 Axis

          UNITECH - FB 63 - - 2012 - Heidenhain iTNC 530

          Technical details
          x-travel 1080 mm︱y-travel 610 mm︱z-travel 810 mm︱spindle tunring speed 15000 U/min︱Control Heidenhain iTNC 530 ︱rapid speed max. 30000 mm/min︱rotary table diameter 600 mm︱surface area table 1100 x 600 mm︱number of tool places 40 Pos.︱tool taper BT40 ︱max. workpiece weight 500 kg︱weight of the machine ca. 8 t︱
          The machine can be viewed under power by appointment. Equipment and accessories: - ICS up to 60 bar - Compressed air through the center of the spindle - chip conveyor - Minimal amount of lubrication The machine has a zero point clamping system built into the rotary table with 10 Tensioners from Schunk. This can be done with compressed air. In the short term, the ball screws are swapped in X and Y, in Z for example a year ago. *** Changes and errors in the technical data and also see Reserve prior sale! ***
            x-travel 1080 mm
            y-travel 610 mm
            z-travel 810 mm
            spindle tunring speed 15000 U/min
            Control Heidenhain iTNC 530
            rapid speed max. 30000 mm/min
            rotary table diameter 600 mm
            surface area table 1100 x 600 mm
            number of tool places 40 Pos.
            tool taper BT40
            max. workpiece weight 500 kg
            weight of the machine ca. 8 t
            Description :
            The machine can be viewed under power by appointment.

            Equipment and accessories:
            - ICS up to 60 bar
            - Compressed air through the center of the spindle
            - chip conveyor
            - Minimal amount of lubrication

            The machine has a zero point clamping system built into the rotary table with 10
            Tensioners from Schunk. This can be done with compressed air.

            In the short term, the ball screws are swapped in X and Y, in Z for example
            a year ago.

            *** Changes and errors in the technical data and also see
            Reserve prior sale! ***
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis GROB G 550


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606037 · Milling Machining Centers 5 Axis

          GROB - G 550 - - 2011 - Siemens 840D

          Technical details
          x-travel 800 mm︱y-travel 950 mm︱z-travel 1020 mm︱Control Siemens 840D ︱spindle hours 12.868 h︱turning speed range - main spindle 10000 min/-1︱drive capacity - main spindle 37 kW︱tool taper HSK 100 ︱number of tool places 60 Pos.︱rapid travel x/y/z 65/50/80 mm/min︱total power requirement 29/39 kW︱weight of the machine ca. 21 t︱
          The machine can be viewed under power by appointment and is in our estimation in a very good condition. Equipped with: - Pallet changer 2-fold built in 2016 - Pallet 4x fluoride connections - Motor spindle HSK-A100 - 5 axis kinematic set Premium - Tool cleaning device - electromechanical tool length checking device - Renishaw infrared probe - IKZ 4-38 bar - Siemens HT8 operator panel - 2 clamping devices type A217, manufactured in 2014 *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 800 mm
            y-travel 950 mm
            z-travel 1020 mm
            Control Siemens 840D
            spindle hours 12.868 h
            turning speed range - main spind. 10000 min/-1
            drive capacity - main spindle 37 kW
            tool taper HSK 100
            number of tool places 60 Pos.
            rapid travel x/y/z 65/50/80 mm/min
            total power requirement 29/39 kW
            weight of the machine ca. 21 t
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in a very good condition.

            Equipped with:
            - Pallet changer 2-fold built in 2016
            - Pallet 4x fluoride connections
            - Motor spindle HSK-A100
            - 5 axis kinematic set Premium
            - Tool cleaning device
            - electromechanical tool length checking device
            - Renishaw infrared probe
            - IKZ 4-38 bar
            - Siemens HT8 operator panel
            - 2 clamping devices type A217, manufactured in 2014

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center DEPO REFORM Depomat 2412


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021019 · Portal - Machining Center

          DEPO REFORM - Depomat 2412 - - unbekannt - Heidenhain 426

          Technical details
          x-axis 2500 mm︱y-axis 1185 mm︱z-axis 705 mm︱Control Heidenhain 426 ︱main spindle: ︱turning speeds 12000 U/min︱spindle motor 25 kW︱number of tool places 16 Pos.︱tool length - max. 230 mm︱tool taper HSK 100 mit ILZ+MMS︱voltage 400V 50HZ︱rated current 110 A︱table: ︱table-size 2500 x 1600 mm︱table load 12 t︱
          The machine can be viewed under power and ours Estimated in a technically good condition. technical features: - ILZ - chip conveyor Tools and clamping devices are not included in the scope of delivery. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-axis 2500 mm
            y-axis 1185 mm
            z-axis 705 mm
            Control Heidenhain 426
            turning speeds 12000 U/min
            spindle motor 25 kW
            number of tool places 16 Pos.
            tool length - max. 230 mm
            tool taper HSK 100 mit ILZ+MMS
            voltage 400V 50HZ
            rated current 110 A
            table-size 2500 x 1600 mm
            table load 12 t
            Description :
            The machine can be viewed under power and ours
            Estimated in a technically good condition.

            technical features:
            - ILZ
            - chip conveyor

            Tools and clamping devices are not included in the scope of delivery.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Universal Milling and Boring Machine

          used  Universal Milling and Boring Machine KEKEISEN UBF-D 7000 / 23


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606024 · Universal Milling and Boring Machine

          KEKEISEN - UBF-D 7000 / 23 - - 2014 -

          Technical details
          x-travel 7000 mm︱y-travel 1200 mm︱z-travel 2300 mm︱total power requirement 30 kW︱weight of the machine ca. 56 t︱required space 20, x 8,0 x 5,5 m︱
            x-travel 7000 mm
            y-travel 1200 mm
            z-travel 2300 mm
            total power requirement 30 kW
            weight of the machine ca. 56 t
            required space 20, x 8,0 x 5,5 m
          Datasheet
          Request / Contact

          Gear Testing Machine

          used  Gear Testing Machine KLINGELNBERG PFSU 1200


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-700008 · Gear Testing Machine

          KLINGELNBERG - PFSU 1200 - - 1974 -

          Technical details
          max. wheel diameter 1200 mm︱gear width 300 mm︱max. module 20 mm︱min. module 0,7 mm︱total power requirement 1,7 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,8 x 2,4 x 2,3 m︱
          Base circle diameter max. 1150 mm Base circle diameter min. 150 mm Test specimens - weight from / to 1500 kg Probe adjustment range - parallel to the axis 1100 mm Helix angle - max. 0-90 ° Wheel diameter - with counterholder 900 mm Probe adjustment range - parallel to the axis 600 mm Center height 1450 mm elec. Version - Voltage / Frequency 400/50 V / Hz The machine is available now. *** Changes and errors in the technical data and specifications as well Subject to prior sale!***
            max. wheel diameter 1200 mm
            gear width 300 mm
            max. module 20 mm
            min. module 0,7 mm
            total power requirement 1,7 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,8 x 2,4 x 2,3 m
            Description :
            Base circle diameter max. 1150 mm

            Base circle diameter min. 150 mm
            Test specimens - weight from / to 1500 kg
            Probe adjustment range - parallel to the axis 1100 mm
            Helix angle - max. 0-90 °
            Wheel diameter - with counterholder 900 mm
            Probe adjustment range - parallel to the axis 600 mm
            Center height 1450 mm
            elec. Version - Voltage / Frequency 400/50 V / Hz

            The machine is available now.

            *** Changes and errors in the technical data and specifications as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Tool and Cutter Grinder

          used  Tool and Cutter Grinder Reinecker WZS 500 CNC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-9000020 · Tool and Cutter Grinder

          Reinecker - WZS 500 CNC - - 1996 -

          Technical details
          x-axis 270 mm︱y-axis 270 mm︱z-axis 550 mm︱c-axis Teilkopf 360° ︱e-axis Schleifkopf ± 200° mm︱max. workpiece diameter 349 mm︱Distance between tips part head / tailstock 775 mm︱Top height above table 175 mm︱centre height over floor 1185 mm︱table surface area 175 x 1400 mm︱split-head spindle connection Steilkegel ISO-50 ︱connected load 38 kVA︱weight of the machine ca. 5,3 t︱
          The machine can be visited by appointment. *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-axis 270 mm
            y-axis 270 mm
            z-axis 550 mm
            c-axis Teilkopf 360°
            e-axis Schleifkopf ± 200° mm
            max. workpiece diameter 349 mm
            Distance between tips part head . 775 mm
            Top height above table 175 mm
            centre height over floor 1185 mm
            table surface area 175 x 1400 mm
            split-head spindle connection Steilkegel ISO-50
            connected load 38 kVA
            weight of the machine ca. 5,3 t
            Description :
            The machine can be visited by appointment.


            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Профіль трейдера: Matthias Ehlers Werkzeugmaschinen

          Зв'язатися з трейдером



            Матіас Елерс верстати
           Ніколаус-Отто-Штрассе 19 + 21
            22946 Trittau
            Deutschland
            + 49 (0) 4154 - 986 99 "> + 12 (49) 0 - 4154 986 99
            + 49 (0) 4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de

          Профіль Трейдера




          Matthias Ehlers Werkzeugmaschinen   22946 Trittau Nikolaus-Otto-Straße 19 + 21 Deutschland
          Matthias Ehlers Werkzeugmaschinen

          Nikolaus-Otto-Straße 19 + 21



          Contact Trader


            Matthias Ehlers Werkzeugmaschinen
           Nikolaus-Otto-Straße 19 + 21
            22946 Trittau
            Deutschland
            +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
            Contact person:

           




          Machine category


          Bandsägeautomat - Horizontal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Filteranlage · Gabelstapler - Elektro · Gewindeschleifmaschine · Honmaschine - Innen - Vertikal · Laserbeschriftungsmaschine · Plandrehmaschine · Plasmaschneidgerät · Portal - Bearbeitungszentrum · Roboter - Handling · Rundtisch · Superfinishmaschine · Universal-Fräs- und Bohrwerk · Vertikales Bearbeitungszentrum · Werkzeugschleifmaschine · Zahnradprüfmaschine ·